Skip to contentSkip to conversation

Bluetooth: btnxpuart: unregister HCI device on probe failure

PATCH In review Myeonghun Pak 3 participants 4 messages Jun 26

Subsystems (2)
lore
Share & tools
lore
#0 lore raw

PATCH 1/1 Bluetooth: btnxpuart: unregister HCI device on probe failure

If hci_register_dev() succeeds but ps_setup() fails, nxp_serdev_probe() jumps to probe_fail and frees the HCI device without first unregistering it. The remove path unregisters the HCI device before freeing it, and the probe error path needs the same ordering once registration has succeeded.

Send failures after successful registration through a new label that calls hci_unregister_dev(), then fall through to the existing reset and free cleanup. Keep hci_register_dev() failures on the original path because the device was not registered in that case.

Fixes 689ca16e5232 ("Bluetooth: NXP: Add protocol support for NXP Bluetooth chipsets")
---
 drivers/bluetooth/btnxpuart.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)
drivers/bluetooth/btnxpuart.c +3 -1
index e7036a48ce..6778b883ab 100644
@@ -1907,13 +1907,15 @@ static int nxp_serdev_probe(struct serdev_device *serdev)
 	}
 
 	if (ps_setup(hdev))
-		goto probe_fail;
+		goto unregister_dev;
 
 	hci_devcd_register(hdev, nxp_coredump, nxp_coredump_hdr,
 			   nxp_coredump_notify);
 
 	return 0;
 
+unregister_dev:
+	hci_unregister_dev(hdev);
 probe_fail:
 	reset_control_assert(nxpdev->pdn);
 	hci_free_dev(hdev);
Signature · 1 line
2.53.0
#1 lore raw

PATCH 1/1 Bluetooth: btnxpuart: unregister HCI device on probe failure

Hi Myeonghun,

Thank you for submitting this patch.

However, a similar patch is already in review and approved by me:
https://patchwork.kernel.org/project/bluetooth/patch/[email protected]/
It's awaiting Luiz's review and/or merge.

Hi Luiz,

Can you please review the patch mentioned in the URL above, from Zhao Dongdong? I have answered your review comment. Thank you for your time and review.

Thanks,
Neeraj

Quoted 43 lines

If hci_register_dev() succeeds but ps_setup() fails, nxp_serdev_probe() jumps to probe_fail and frees the HCI device without first unregistering it. The remove path unregisters the HCI device before freeing it, and the probe error path needs the same ordering once registration has succeeded.

Send failures after successful registration through a new label that calls hci_unregister_dev(), then fall through to the existing reset and free cleanup. Keep hci_register_dev() failures on the original path because the device was not registered in that case.

Fixes 689ca16e5232 ("Bluetooth: NXP: Add protocol support for NXP

Bluetooth chipsets")

---
 drivers/bluetooth/btnxpuart.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)
drivers/bluetooth/btnxpuart.c +3 -1
index e7036a48ce..6778b883ab 100644
@@ -1907,13 +1907,15 @@ static int nxp_serdev_probe(struct serdev_device
 *serdev)
        }
 
        if (ps_setup(hdev))
-               goto probe_fail;
+               goto unregister_dev;
 
        hci_devcd_register(hdev, nxp_coredump, nxp_coredump_hdr,
                           nxp_coredump_notify);
 
        return 0;
 
+unregister_dev:
+       hci_unregister_dev(hdev);
 probe_fail:
        reset_control_assert(nxpdev->pdn);
        hci_free_dev(hdev);

--
2.53.0

#2 lore raw

Hi Neeraj,

Thank you for checking and for pointing me to Zhao's patch.

I missed that pending review. Please ignore my patch; I will defer to the existing patch from Zhao Dongdong.

Sorry for the noise.

Best regards,
Myeonghun

2026년 6월 26일 (금) 오후 6:07, Neeraj Sanjay Kale <[email protected]>님이 작성:

Quoted 63 lines

Hi Myeonghun,

Thank you for submitting this patch.

However, a similar patch is already in review and approved by me:
https://patchwork.kernel.org/project/bluetooth/patch/[email protected]/
It's awaiting Luiz's review and/or merge.

Hi Luiz,

Can you please review the patch mentioned in the URL above, from Zhao Dongdong? I have answered your review comment. Thank you for your time and review.

Thanks,
Neeraj

Quoted 43 lines

If hci_register_dev() succeeds but ps_setup() fails, nxp_serdev_probe() jumps to probe_fail and frees the HCI device without first unregistering it. The remove path unregisters the HCI device before freeing it, and the probe error path needs the same ordering once registration has succeeded.

Send failures after successful registration through a new label that calls hci_unregister_dev(), then fall through to the existing reset and free cleanup. Keep hci_register_dev() failures on the original path because the device was not registered in that case.

Fixes 689ca16e5232 ("Bluetooth: NXP: Add protocol support for NXP

Bluetooth chipsets")

---
 drivers/bluetooth/btnxpuart.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)
drivers/bluetooth/btnxpuart.c +3 -1
index e7036a48ce..6778b883ab 100644
@@ -1907,13 +1907,15 @@ static int nxp_serdev_probe(struct serdev_device
 *serdev)
        }
 
        if (ps_setup(hdev))
-               goto probe_fail;
+               goto unregister_dev;
 
        hci_devcd_register(hdev, nxp_coredump, nxp_coredump_hdr,
                           nxp_coredump_notify);
 
        return 0;
 
+unregister_dev:
+       hci_unregister_dev(hdev);
 probe_fail:
        reset_control_assert(nxpdev->pdn);
        hci_free_dev(hdev);

--
2.53.0

#3 lore raw
In reply to Myeonghun Pak

This is automated email and please do not reply to this email!

Dear submitter,

Thank you for submitting the patches to the linux bluetooth mailing list. This is a CI test results with your patch series:
PW Link:https://patchwork.kernel.org/project/bluetooth/list/?series=1116973

---Test result---

Test Summary:

CheckPatch                    PASS      1.06 seconds
VerifyFixes                   PASS      0.32 seconds
VerifySignedoff               PASS      0.26 seconds
GitLint                       PASS      0.69 seconds
SubjectPrefix                 PASS      0.26 seconds
BuildKernel                   PASS      27.29 seconds
CheckAllWarning               PASS      30.10 seconds
CheckSparse                   PASS      29.16 seconds
BuildKernel32                 PASS      26.36 seconds
CheckKernelLLVM               SKIP      0.00 seconds
TestRunnerSetup               PASS      503.86 seconds
IncrementalBuild              PASS      26.49 seconds

Details
##############################
Test: CheckKernelLLVM - SKIP
Desc: Build kernel with LLVM + context analysis
Output:
Clang not found

https://github.com/bluez/bluetooth-next/pull/355

---
Regards,
Linux Bluetooth