iio: temperature: tmp117: Support the TMP119 sensor
v3 cover iio: temperature: tmp117: Support the TMP119 sensor
Hello everyone,
This is version three of my series which adds support for the TMP119, which has an identical programming model to the TMP117, but slightly different specs and electrical characteristics.
Best Regards,
Romain
---
Changes in v3:
- Corrected indentation in device tree bindings
- Added an explicit inclusion of array_size.h
- Made sure the correct IIO device name was exposed to userspace
- Link to v2: https://patch.msgid.link/[email protected]
Changes in v2:
- Used ti,tmp117 as a fallback compatible
- Made sure the correct IIO device name was exposed to userspace
- Link to v1: https://patch.msgid.link/[email protected]
To: Puranjay Mohan <[email protected]>
To: Jonathan Cameron <[email protected]>
To: David Lechner <[email protected]>
To: Nuno Sá <[email protected]>
To: Andy Shevchenko <[email protected]>
To: Rob Herring <[email protected]>
To: Krzysztof Kozlowski <[email protected]>
To: Conor Dooley <[email protected]>
Cc: Thomas Petazzoni <[email protected]>
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
---
Romain Gantois (1):
dt-bindings: iio: ti,tmp117: add binding for the TMP119
Wil Stark (1):
iio: temperature: tmp117: add TI TMP119 support
.../devicetree/bindings/iio/temperature/ti,tmp117.yaml | 16 +++++++++++----- drivers/iio/temperature/tmp117.c | 13 +++++++++++++ 2 files changed, 24 insertions(+), 5 deletions(-)
---
base-commit: dc59e4fea9d83f03bad6bddf3fa2e52491777482
change-id: 20260605-tmp119-662d21e4d317
Best regards,
Signature · 1 line
Romain Gantois <[email protected]>
PATCH v3 1/2 dt-bindings: iio: ti,tmp117: add binding for the TMP119
The TMP119 has the same register layout as the TMP117, and a better local sensor accuracy. Add a compatible for it.
Use ti,tmp117 as a fallback compatible for ti,tmp119.
--- .../devicetree/bindings/iio/temperature/ti,tmp117.yaml | 16 +++++++++++----- 1 file changed, 11 insertions(+), 5 deletions(-)
Documentation/devicetree/bindings/iio/temperature/ti,tmp117.yaml +11 -5
@@ -7,19 +7,25 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: TI TMP117 - Digital temperature sensor with integrated NV memory description: | - TI TMP116/117 - Digital temperature sensor with integrated NV memory that - supports I2C interface. + TI TMP116/117/119 - Digital temperature sensor with integrated NV memory + that supports I2C interface. https://www.ti.com/lit/gpn/tmp116 https://www.ti.com/lit/gpn/tmp117 + https://www.ti.com/lit/gpn/tmp119 maintainers: - Puranjay Mohan <[email protected]> properties: compatible: - enum: - - ti,tmp116 - - ti,tmp117 + oneOf: + - enum: + - ti,tmp116 + - ti,tmp117 + - items: + - enum: + - ti,tmp119 + - const: ti,tmp117 reg: maxItems: 1
Signature · 1 line
2.54.0
Re: [PATCH v3 1/2] dt-bindings: iio: ti,tmp117: add binding for the TMP119
pw-bot: not-applicable
PATCH v3 2/2 iio: temperature: tmp117: add TI TMP119 support
In reply to Romain GantoisFrom: Wil Stark <[email protected]>
Add support for the TMP119 temperature sensor, which has the same programming model as the TMP117.
--- drivers/iio/temperature/tmp117.c | 13 +++++++++++++ 1 file changed, 13 insertions(+)
drivers/iio/temperature/tmp117.c +13 -0
@@ -9,6 +9,7 @@* Note: This driver assumes that the sensor has been calibrated beforehand. */ +#include <linux/array_size.h> #include <linux/delay.h> #include <linux/err.h> #include <linux/i2c.h>
@@ -38,6 +39,7 @@#define TMP116_DEVICE_ID 0x1116#define TMP117_DEVICE_ID 0x0117 +#define TMP119_DEVICE_ID 0x2117struct tmp117_data {struct i2c_client *client;
@@ -139,6 +141,12 @@ static const struct tmp11x_info tmp117_channels_info = { .num_channels = ARRAY_SIZE(tmp117_channels) }; +static const struct tmp11x_info tmp119_channels_info = { + .name ="tmp119" , + .channels = tmp117_channels, + .num_channels =ARRAY_SIZE (tmp117_channels) +}; +static const struct iio_info tmp117_info = { .read_raw = tmp117_read_raw, .write_raw = tmp117_write_raw,
@@ -172,6 +180,9 @@ static int tmp117_probe(struct i2c_client *client)case TMP117_DEVICE_ID : match_data = &tmp117_channels_info;break ; +case TMP119_DEVICE_ID : + match_data = &tmp119_channels_info; +break ;default : dev_info(&client->dev, "Unknown device id (0x%x), use fallback compatible\n",
@@ -204,6 +215,7 @@ static int tmp117_probe(struct i2c_client *client)static const struct of_device_id tmp117_of_match[] = { { .compatible ="ti,tmp116" , .data = &tmp116_channels_info }, { .compatible ="ti,tmp117" , .data = &tmp117_channels_info }, + { .compatible ="ti,tmp119" , .data = &tmp119_channels_info }, { } };MODULE_DEVICE_TABLE (of, tmp117_of_match);
@@ -211,6 +223,7 @@ MODULE_DEVICE_TABLE(of, tmp117_of_match);static const struct i2c_device_id tmp117_id[] = { { .name ="tmp116" , .driver_data = (kernel_ulong_t)&tmp116_channels_info }, { .name ="tmp117" , .driver_data = (kernel_ulong_t)&tmp117_channels_info }, + { .name ="tmp119" , .driver_data = (kernel_ulong_t)&tmp119_channels_info }, { } };MODULE_DEVICE_TABLE (i2c, tmp117_id);
Signature · 1 line
2.54.0
Re: [PATCH v3 2/2] iio: temperature: tmp117: add TI TMP119 support
Quoted 2 lines · Romain Gantois
Add support for the TMP119 temperature sensor, which has the same programming model as the TMP117.
Fine with me,
Signature · 2 lines
With Best Regards, Andy Shevchenko
Jonathan Cameron
maintainerQuoted 11 lines · On Tue, 30 Jun 2026 11:26:33 +0200 Romain Gantois <[email protected]>…
Hello everyone,
This is version three of my series which adds support for the TMP119, which has an identical programming model to the TMP117, but slightly different specs and electrical characteristics.
Best Regards,
Romain
Signed-off-by Romain Gantois <[email protected]>
Applied to the testing branch of iio.git. I'll push it out as togreg for linux-next to pick up once I've caught up with my rather large review backlog and anything applied has been through a bit of bot testing!
Thanks,
Jonathan
Quoted 44 lines
---
Changes in v3:
- Corrected indentation in device tree bindings
- Added an explicit inclusion ofarray_size.h
- Made sure the correct IIO device name was exposed to userspace
- Link to v2: https://patch.msgid.link/[email protected]Changes in v2:
- Used ti,tmp117 as a fallback compatible
- Made sure the correct IIO device name was exposed to userspace
- Link to v1: https://patch.msgid.link/[email protected]To: Puranjay Mohan <[email protected]>
To: Jonathan Cameron <[email protected]>
To: David Lechner <[email protected]>
To: Nuno Sá <[email protected]>
To: Andy Shevchenko <[email protected]>
To: Rob Herring <[email protected]>
To: Krzysztof Kozlowski <[email protected]>
To: Conor Dooley <[email protected]>
Cc: Thomas Petazzoni <[email protected]>
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]---
Romain Gantois (1):
dt-bindings: iio: ti,tmp117: add binding for the TMP119Wil Stark (1):
iio: temperature: tmp117: add TI TMP119 support.../devicetree/bindings/iio/temperature/ti,tmp117.yaml | 16 +++++++++++----- drivers/iio/temperature/tmp117.c | 13 +++++++++++++ 2 files changed, 24 insertions(+), 5 deletions(-)---
base-commit:dc59e4fea9d83f03bad6bddf3fa2e52491777482
change-id: 20260605-tmp119-662d21e4d317Best regards,
Signature · 1 line
Romain Gantois <[email protected]>