binman: imx8mimage: Generate FSPI header in binman instead of mkimage
Subsystems (2)
PATCH v2 1/3 binman: imx8mimage: Generate FSPI header in binman instead of mkimage
Stop depending on the current mkimage method of generating the FSPI header, instead generate the FSPI header within binman itself. This is more flexible, as the FSPI header properties can be configured from within the board-specific DT instead of being hard-coded in mkimage at build time.
---
Cc: "NXP i.MX U-Boot Team" <[email protected]>
Cc: Fabio Estevam <[email protected]>
Cc: Quentin Schulz <[email protected]>
Cc: Simon Glass <[email protected]>
Cc: Stefano Babic <[email protected]>
Cc: Tom Rini <[email protected]>
Cc: Wojciech Dubowik <[email protected]>
Cc: Yannic Moog <[email protected]>
Cc: [email protected]
---
V2: - Drop import os
- Update class documentation, document defaults
---
tools/binman/etype/nxp_imx8mimage.py | 97 +++++++++++++++++--
tools/binman/ftest.py | 23 ++---
tools/binman/test/vendor/nxp_imx8m_fspi.dts | 1 -
.../nxp_imx8m_fspi_fail_columnadresswidth.dts | 19 ++++
...dts => nxp_imx8m_fspi_fail_devicetype.dts} | 3 +-
.../nxp_imx8m_fspi_fail_flashpadtype.dts | 19 ++++
.../nxp_imx8m_fspi_fail_readsampleclksrc.dts | 19 ++++
.../nxp_imx8m_fspi_fail_serialclkfreq.dts | 19 ++++
.../test/vendor/nxp_imx8m_fspi_pass.dts | 1 -
9 files changed, 179 insertions(+), 22 deletions(-)
create mode 100644 tools/binman/test/vendor/nxp_imx8m_fspi_fail_columnadresswidth.dts
rename tools/binman/test/vendor/{nxp_imx8m_fspi_fail.dts => nxp_imx8m_fspi_fail_devicetype.dts} (83%)
create mode 100644 tools/binman/test/vendor/nxp_imx8m_fspi_fail_flashpadtype.dts
create mode 100644 tools/binman/test/vendor/nxp_imx8m_fspi_fail_readsampleclksrc.dts
create mode 100644 tools/binman/test/vendor/nxp_imx8m_fspi_fail_serialclkfreq.dtstools/binman/etype/nxp_imx8mimage.py +89 -8
@@ -7,7 +7,7 @@ # configuration file and input data. # -import os +import struct from collections import OrderedDict
@@ -25,8 +25,26 @@ class Entry_nxp_imx8mimage(Entry_mkimage): - nxp,boot-from - device to boot from (e.g. 'sd') - nxp,loader-address - loader address (SPL text base) - nxp,rom-version - BootROM version ('2' for i.MX8M Nano and Plus) - - nxp,fspi-header-filename - FSPI header file name (CONFIG_FSPI_CONF_FILE). - Used only if 'nxp,boot-from == "fspi"' . + + Properties / Entry arguments for FSPI boot mode (nxp,boot-from = "fspi"): + - nxp,fspi-columnadresswidth - FSPI column address width + (3 - HyperFlash, 12/13 - Serial NAND, 0 - Otherwise (default)) + - nxp,fspi-controllermisc-diffclk - FSPI differential clock enable (default off) + - nxp,fspi-controllermisc-wordaddr - FSPI word addressable enable (default off) + - nxp,fspi-controllermisc-safecfg - FSPI safe configuration frequency (default off) + - nxp,fspi-controllermisc-padovr - FSPI pad setting override (default off) + - nxp,fspi-controllermisc-ddrmode - FSPI DDR mode (default off) + - nxp,fspi-lutcustomseq - FSPI use LUT sequence parameters (default off) + - nxp,fspi-devicetype - FSPI device type + (1 - SPI NOR (default), 2 - Serial NAND) + - nxp,fspi-flasha1size - FSPI device size (default 0x10000000) + - nxp,fspi-flashpadtype - FSPI flash pad type + (1 - Single pad (default), 2 - Dual pads, 4 - Quad pads, 8 - Octal pads) + - nxp,fspi-readsampleclksrc - FSPI clock source + (0 - Internal loopback (default), 1 - loopback from DQS pad, 3 - Flash provided DQS). + - nxp,fspi-serialclkfreq - FSPI clock frequency + (1 - 30 MHz, 2 - 50 MHz (default), 3 - 60 MHz, 4 - 75 MHz, 5 - 80 MHz, + 6 - 100 MHz, 7 - 133 MHz, 8 - 166 MHz). """ def __init__(self, section, etype, node):
@@ -37,9 +55,30 @@ class Entry_nxp_imx8mimage(Entry_mkimage): def ReadNode(self): super().ReadNode() self.boot_from = fdt_util.GetString(self._node, 'nxp,boot-from') - self.fspi_header = fdt_util.GetString(self._node, 'nxp,fspi-header-filename', 'fspi_header.bin') + self.fspi_columnadresswidth = fdt_util.GetInt(self._node, 'nxp,fspi-columnadresswidth', 0) + self.fspi_controllermisc_diffclk = fdt_util.GetBool(self._node, 'nxp,fspi-controllermisc-diffclk') + self.fspi_controllermisc_wordaddr = fdt_util.GetBool(self._node, 'nxp,fspi-controllermisc-wordaddr') + self.fspi_controllermisc_safecfg = fdt_util.GetBool(self._node, 'nxp,fspi-controllermisc-safecfg') + self.fspi_controllermisc_padovr = fdt_util.GetBool(self._node, 'nxp,fspi-controllermisc-padovr') + self.fspi_controllermisc_ddrmode = fdt_util.GetBool(self._node, 'nxp,fspi-controllermisc-ddrmode') + self.fspi_devicetype = fdt_util.GetInt(self._node, 'nxp,fspi-devicetype', 1) + self.fspi_flasha1size = fdt_util.GetInt(self._node, 'nxp,fspi-flasha1size', 0x10000000) + self.fspi_flashpadtype = fdt_util.GetInt(self._node, 'nxp,fspi-flashpadtype', 1) + self.fspi_lutcustomseq = fdt_util.GetBool(self._node, 'nxp,fspi-lutcustomseq') + self.fspi_readsampleclksrc = fdt_util.GetInt(self._node, 'nxp,fspi-readsampleclksrc', 0) + self.fspi_serialclkfreq = fdt_util.GetInt(self._node, 'nxp,fspi-serialclkfreq', 2) self.loader_address = fdt_util.GetInt(self._node, 'nxp,loader-address') self.rom_version = fdt_util.GetInt(self._node, 'nxp,rom-version') + if not self.fspi_columnadresswidth in [ 0, 3, 12, 13 ]: + raise ValueError('nxp,fspi-columnadresswidth can be 0, 3, 12, 13 only.') + if not self.fspi_devicetype in [ 1, 2 ]: + raise ValueError('nxp,fspi-devicetype can be 1, 2 only.') + if not self.fspi_flashpadtype in [ 1, 2, 4, 8 ]: + raise ValueError('nxp,fspi-flashpadtype can be 1, 2, 4, 8 only.') + if not self.fspi_readsampleclksrc in [ 0, 1, 3 ]: + raise ValueError('nxp,fspi-readsampleclksrc can be 0, 1, 3 only.') + if not self.fspi_serialclkfreq in [ 1, 2, 3, 4, 5, 6, 7, 8 ]: + raise ValueError('nxp,fspi-serialclkfreq can be 1..8 only.') self.ReadEntries() def BuildSectionData(self, required):
@@ -59,10 +98,52 @@ class Entry_nxp_imx8mimage(Entry_mkimage): if self.mkimage.run_cmd(*args) is not None: outdata = tools.read_file(output_fname) if self.boot_from == 'fspi': - spidata = tools.read_file(os.path.join(tools.get_output_dir(), self.fspi_header)) - if len(spidata) != 448: - raise ValueError("FSPI header is not 448 Bytes long") - spidata += tools.get_bytes(0, 0x1000 - len(spidata)) + # 0x00 ... Tag + spidata = struct.pack('<I', 0x42464346) + # 0x04 ... Version + spidata += struct.pack('<I', 0x56010000) + # 0x08 ... Reserved + spidata += struct.pack('<I', 0) + # 0x0c ... readSampleClkSrc (LSByte at 0x0c), dataHoldTime, + # dataSetupTime, columnAdressWidth (MSByte at 0x0f) + spidata += struct.pack('<I', 0x00030300 | + (self.fspi_columnadresswidth << 24) | + self.fspi_readsampleclksrc) + + # 0x10..0x3f ... Padding + spidata += tools.get_bytes(0, 0x30) + + # 0x40 ... controllerMiscOption + spidata += struct.pack('<I', + ((1 << 0) if self.fspi_controllermisc_diffclk else 0) | + ((1 << 3) if self.fspi_controllermisc_wordaddr else 0) | + ((1 << 4) if self.fspi_controllermisc_safecfg else 0) | + ((1 << 5) if self.fspi_controllermisc_padovr else 0) | + ((1 << 6) if self.fspi_controllermisc_ddrmode else 0)) + + # 0x44 ... deviceType (LSByte at 0x44), sflashPadType, + # serialClkFreq, lutCustomSeqEnable (MSByte at 0x47) + spidata += struct.pack('<I', + ((1 << 24) if self.fspi_lutcustomseq else 0) | + (self.fspi_serialclkfreq << 16) | + (self.fspi_flashpadtype << 8) | + self.fspi_devicetype) + + # 0x48..0x4f ... Padding + spidata += tools.get_bytes(0, 0x8) + + # 0x50 ... flashA1Size + spidata += struct.pack('<I', self.fspi_flasha1size) + + # 0x54..0x7f ... Padding + spidata += tools.get_bytes(0, 0x2c) + + # 0x80 ... lookupTable + spidata += struct.pack('<I', 0x0818040b) + spidata += struct.pack('<I', 0x24043008) + + # 0x88..0xfff ... Padding (end of FSPI block is 0x1bf, align to 4k) + spidata += tools.get_bytes(0, 0x1000 - 0xa8) outdata = spidata + outdata return outdata else:
tools/binman/ftest.py +12 -11
@@ -8101,17 +8101,18 @@ fdt fdtmap Extract the devicetree blob from the fdtmap def testNxpImx8MFSPI(self): """Test that binman can produce an iMX8m FSPI image""" - testdir = tempfile.mkdtemp(prefix='binman.') - - tools.write_file(os.path.join(testdir, 'fspi_header.bin'), tools.get_bytes(0, 448)) - with terminal.capture(): - self._DoTestFile('vendor/nxp_imx8m_fspi.dts', output_dir=testdir) - self._DoTestFile('vendor/nxp_imx8m_fspi_pass.dts', output_dir=testdir) - - tools.write_file(os.path.join(testdir, 'fspi_header_fail.bin'), tools.get_bytes(0, 4097)) - with terminal.capture(): - with self.assertRaises(ValueError) as e: - self._DoTestFile('vendor/nxp_imx8m_fspi_fail.dts', output_dir=testdir) + self._DoTestFile('vendor/nxp_imx8m_fspi.dts') + self._DoTestFile('vendor/nxp_imx8m_fspi_pass.dts') + with self.assertRaises(ValueError) as e: + self._DoTestFile('vendor/nxp_imx8m_fspi_fail_columnadresswidth.dts') + with self.assertRaises(ValueError) as e: + self._DoTestFile('vendor/nxp_imx8m_fspi_fail_devicetype.dts') + with self.assertRaises(ValueError) as e: + self._DoTestFile('vendor/nxp_imx8m_fspi_fail_flashpadtype.dts') + with self.assertRaises(ValueError) as e: + self._DoTestFile('vendor/nxp_imx8m_fspi_fail_readsampleclksrc.dts') + with self.assertRaises(ValueError) as e: + self._DoTestFile('vendor/nxp_imx8m_fspi_fail_serialclkfreq.dts') def testNxpHeaderDdrfw(self): """Test that binman can add a header to DDR PHY firmware images"""
tools/binman/test/vendor/nxp_imx8m_fspi.dts +0 -1
@@ -10,7 +10,6 @@ nxp-imx8mimage { args; /* TODO: Needed by mkimage etype superclass */ nxp,boot-from = "fspi"; - nxp,fspi-header-filename = "fspi_header.bin"; nxp,rom-version = <1>; nxp,loader-address = <0x10>; };
tools/binman/test/vendor/nxp_imx8m_fspi_fail_columnadresswidth.dts new file +19 -0
@@ -0,0 +1,19 @@ +// SPDX-License-Identifier: GPL-2.0+ + +/dts-v1/; + +/ { + #address-cells = <1>; + #size-cells = <1>; + + binman { + nxp-imx8mimage { + args; /* TODO: Needed by mkimage etype superclass */ + nxp,boot-from = "fspi"; + nxp,rom-version = <2>; + nxp,loader-address = <0x10>; + /* Bogus value */ + nxp,fspi-columnadresswidth = <1>; + }; + }; +};
tools/binman/test/vendor/nxp_imx8m_fspi_fail_devicetype.dts renamed from tools/binman/test/vendor/nxp_imx8m_fspi_fail.dts +2 -1
@@ -10,9 +10,10 @@ nxp-imx8mimage { args; /* TODO: Needed by mkimage etype superclass */ nxp,boot-from = "fspi"; - nxp,fspi-header-filename = "fspi_header_fail.bin"; nxp,rom-version = <2>; nxp,loader-address = <0x10>; + /* Bogus value */ + nxp,fspi-devicetype = <3>; }; }; };
tools/binman/test/vendor/nxp_imx8m_fspi_fail_flashpadtype.dts new file +19 -0
@@ -0,0 +1,19 @@ +// SPDX-License-Identifier: GPL-2.0+ + +/dts-v1/; + +/ { + #address-cells = <1>; + #size-cells = <1>; + + binman { + nxp-imx8mimage { + args; /* TODO: Needed by mkimage etype superclass */ + nxp,boot-from = "fspi"; + nxp,rom-version = <2>; + nxp,loader-address = <0x10>; + /* Bogus value */ + nxp,fspi-flashpadtype = <9>; + }; + }; +};
tools/binman/test/vendor/nxp_imx8m_fspi_fail_readsampleclksrc.dts new file +19 -0
@@ -0,0 +1,19 @@ +// SPDX-License-Identifier: GPL-2.0+ + +/dts-v1/; + +/ { + #address-cells = <1>; + #size-cells = <1>; + + binman { + nxp-imx8mimage { + args; /* TODO: Needed by mkimage etype superclass */ + nxp,boot-from = "fspi"; + nxp,rom-version = <2>; + nxp,loader-address = <0x10>; + /* Bogus value */ + nxp,fspi-readsampleclksrc = <2>; + }; + }; +};
tools/binman/test/vendor/nxp_imx8m_fspi_fail_serialclkfreq.dts new file +19 -0
@@ -0,0 +1,19 @@ +// SPDX-License-Identifier: GPL-2.0+ + +/dts-v1/; + +/ { + #address-cells = <1>; + #size-cells = <1>; + + binman { + nxp-imx8mimage { + args; /* TODO: Needed by mkimage etype superclass */ + nxp,boot-from = "fspi"; + nxp,rom-version = <2>; + nxp,loader-address = <0x10>; + /* Bogus value */ + nxp,fspi-serialclkfreq = <9>; + }; + }; +};
tools/binman/test/vendor/nxp_imx8m_fspi_pass.dts +0 -1
@@ -10,7 +10,6 @@ nxp-imx8mimage { args; /* TODO: Needed by mkimage etype superclass */ nxp,boot-from = "fspi"; - /* Default nxp,fspi-header-filename = "fspi_header.bin"; */ nxp,rom-version = <2>; nxp,loader-address = <0x10>; };
Signature · 1 line
2.53.0
PATCH v2 2/3 arm64: dts: imx8mm: Drop nxp,fspi-header-filename
The FSPI header is now generated purely using binman, drop no longer supported nxp,fspi-header-filename property.
---
Cc: "NXP i.MX U-Boot Team" <[email protected]>
Cc: Fabio Estevam <[email protected]>
Cc: Quentin Schulz <[email protected]>
Cc: Simon Glass <[email protected]>
Cc: Stefano Babic <[email protected]>
Cc: Tom Rini <[email protected]>
Cc: Wojciech Dubowik <[email protected]>
Cc: Yannic Moog <[email protected]>
Cc: [email protected]
---
V2: - New patch
--- arch/arm/dts/imx8mm-u-boot.dtsi | 1 - 1 file changed, 1 deletion(-)
arch/arm/dts/imx8mm-u-boot.dtsi +0 -1
@@ -62,7 +62,6 @@ filename = "u-boot-spl-mkimage.bin"; #ifdef CONFIG_FSPI_CONF_HEADER nxp,boot-from = "fspi"; - nxp,fspi-header-filename = CONFIG_FSPI_CONF_FILE; #else nxp,boot-from = "sd"; #endif
Signature · 1 line
2.53.0
Re: [PATCH v2 2/3] arm64: dts: imx8mm: Drop nxp,fspi-header-filename
Quoted 4 lines · Marek Vasut
The FSPI header is now generated purely using binman, drop no longer supported nxp,fspi-header-filename property.
Signed-off-by Marek Vasut <[email protected]>
Re: [PATCH v2 2/3] arm64: dts: imx8mm: Drop nxp,fspi-header-filename
In reply to Marek VasutQuoted 10 lines · Marek Vasut
arm64: dts: imx8mm: Drop nxp,fspi-header-filename
The FSPI header is now generated purely using binman, drop no longer supported nxp,fspi-header-filename property.
Signed-off-by Marek Vasut <[email protected]>Acked-by Peng Fan <[email protected]>
arch/arm/dts/imx8mm-u-boot.dtsi| 1 -1 file changed, 1 deletion(-)
PATCH v2 3/3 arm64: dts: imx8mn: Drop nxp,fspi-header-filename
In reply to Marek VasutThe FSPI header is now generated purely using binman, drop no longer supported nxp,fspi-header-filename property.
---
Cc: "NXP i.MX U-Boot Team" <[email protected]>
Cc: Fabio Estevam <[email protected]>
Cc: Quentin Schulz <[email protected]>
Cc: Simon Glass <[email protected]>
Cc: Stefano Babic <[email protected]>
Cc: Tom Rini <[email protected]>
Cc: Wojciech Dubowik <[email protected]>
Cc: Yannic Moog <[email protected]>
Cc: [email protected]
---
V2: - New patch
--- arch/arm/dts/imx8mn-u-boot.dtsi | 1 - 1 file changed, 1 deletion(-)
arch/arm/dts/imx8mn-u-boot.dtsi +0 -1
@@ -116,7 +116,6 @@ filename = "u-boot-spl-mkimage.bin"; #ifdef CONFIG_FSPI_CONF_HEADER nxp,boot-from = "fspi"; - nxp,fspi-header-filename = CONFIG_FSPI_CONF_FILE; #else nxp,boot-from = "sd"; #endif
Signature · 1 line
2.53.0
Re: [PATCH v2 3/3] arm64: dts: imx8mn: Drop nxp,fspi-header-filename
Quoted 4 lines · Marek Vasut
The FSPI header is now generated purely using binman, drop no longer supported nxp,fspi-header-filename property.
Signed-off-by Marek Vasut <[email protected]>
Re: [PATCH v2 3/3] arm64: dts: imx8mn: Drop nxp,fspi-header-filename
In reply to Marek VasutQuoted 10 lines · Marek Vasut
arm64: dts: imx8mn: Drop nxp,fspi-header-filename
The FSPI header is now generated purely using binman, drop no longer supported nxp,fspi-header-filename property.
Signed-off-by Marek Vasut <[email protected]>Acked-by Peng Fan <[email protected]>
arch/arm/dts/imx8mn-u-boot.dtsi| 1 -1 file changed, 1 deletion(-)
Quoted 7 lines · Marek Vasut
Stop depending on the current mkimage method of generating the FSPI header, instead generate the FSPI header within binman itself. This is more flexible, as the FSPI header properties can be configured from within the board-specific DT instead of being hard-coded in mkimage at build time.
Signed-off-by Marek Vasut <[email protected]>
Hi Marek,
Quoted 24 lines · Marek Vasut
binman: imx8mimage: Generate FSPI header in binman instead of mkimage
Stop depending on the current mkimage method of generating the FSPI header, instead generate the FSPI header within binman itself. This is more flexible, as the FSPI header properties can be configured from within the board-specific DT instead of being hard-coded in mkimage at build time.
Signed-off-by Marek Vasut <[email protected]>Acked-by Peng Fan <[email protected]>
tools/binman/etype/nxp_imx8mimage.py| 97 ++++++++++++++++++++--tools/binman/ftest.py | 23 ++--- tools/binman/test/vendor/nxp_imx8m_fspi.dts | 1 - .../nxp_imx8m_fspi_fail_columnadresswidth.dts | 19 +++++ ...fail.dts => nxp_imx8m_fspi_fail_devicetype.dts} | 3 +- .../vendor/nxp_imx8m_fspi_fail_flashpadtype.dts | 19 +++++ .../nxp_imx8m_fspi_fail_readsampleclksrc.dts | 19 +++++ .../vendor/nxp_imx8m_fspi_fail_serialclkfreq.dts | 19 +++++ tools/binman/test/vendor/nxp_imx8m_fspi_pass.dts | 1 - 9 files changed, 179 insertions(+), 22 deletions(-)
tools/binman/etype/nxp_imx8mimage.py class Entry_nxp_imx8mimage(Entry_mkimage): · line 25
Quoted 1 line
tools/binman/etype/nxp_imx8mimage.py +1
-0@@ -25,8 +25,26 @@ class Entry_nxp_imx8mimage(Entry_mkimage): + - nxp,fspi-columnadresswidth - FSPI column address width
This misspells 'address'. It becomes part of the binman DT binding and will be hard to change later, so please can you rename it to nxp,fspi-columnaddresswidth (and the matching variable)?
tools/binman/etype/nxp_imx8mimage.py class Entry_nxp_imx8mimage(Entry_mkimage): · line 56
Quoted 4 lines
tools/binman/etype/nxp_imx8mimage.py +2
-0@@ -37,9 +55,30 @@ class Entry_nxp_imx8mimage(Entry_mkimage): + if not self.fspi_columnadresswidth in [ 0, 3, 12, 13 ]: + raise ValueError('nxp,fspi-columnadresswidth can be 0, 3, 12, 13 only.')
Please use self.Raise() rather than raise ValueError, as with other etypes - it adds the node path so the user can see which image is at fault. Also 'not in' reads better than 'not x in':
if self.fspi_columnadresswidth not in [0, 3, 12, 13]:
self.Raise('nxp,fspi-columnadresswidth can be 0, 3, 12, 13 only')
Same for the other four checks.
tools/binman/etype/nxp_imx8mimage.py class Entry_nxp_imx8mimage(Entry_mkimage): · line 100
Quoted 5 lines
tools/binman/etype/nxp_imx8mimage.py +3
-0@@ -59,10 +98,52 @@ class Entry_nxp_imx8mimage(Entry_mkimage): + # 0x80 ... lookupTable + spidata += struct.pack('<I', 0x0818040b) + spidata += struct.pack('<I', 0x24043008)
Just to check, this LUT is a single-pad fast-read sequence, so should we mention the fixed read command? E.g. if a board uses quad pads, what will happen.
tools/binman/etype/nxp_imx8mimage.py class Entry_nxp_imx8mimage(Entry_mkimage): · line 99
Quoted 4 lines
tools/binman/etype/nxp_imx8mimage.py +2
-0@@ -59,10 +98,52 @@ class Entry_nxp_imx8mimage(Entry_mkimage): + # 0x88..0xfff ... Padding (end of FSPI block is 0x1bf, align to 4k) + spidata += tools.get_bytes(0, 0x1000 - 0xa8)
At this point len(spidata) is 0x88, not 0xa8, so the header comes out as 0xfe0 bytes and the mkimage output starts at 0xfe0 instead of 0x1000
- 0x20 bytes short. Please use the actual length so this cannot go stale:
spidata += tools.get_bytes(0, 0x1000 - len(spidata))
tools/binman/ftest.py fdt fdtmap Extract the devicetree blob from the fdtmap · line 8102
Quoted 4 lines
tools/binman/ftest.py +2
-0@@ -8101,17 +8101,18 @@ fdt fdtmap Extract the devicetree blob from the fdtmap + self._DoTestFile('vendor/nxp_imx8m_fspi.dts') + self._DoTestFile('vendor/nxp_imx8m_fspi_pass.dts')
Since binman now generates the header itself, please can you check the output data in the test, e.g. verify the tag at offset 0 and that the mkimage data starts at 0x1000? That would have caught the padding problem above. Also please use assertIn() on str(e.exception) for each failure case, so the test confirms the expected error rather than any ValueError.
Regards,
Simon
On 7/2/26 1:13 PM, Simon Glass wrote:
[...]
Quoted 9 lines
tools/binman/etype/nxp_imx8mimage.py class Entry_nxp_imx8mimage(Entry_mkimage): · line 100
Quoted 5 lines
tools/binman/etype/nxp_imx8mimage.py +3
-0@@ -59,10 +98,52 @@ class Entry_nxp_imx8mimage(Entry_mkimage): + # 0x80 ... lookupTable + spidata += struct.pack('<I', 0x0818040b) + spidata += struct.pack('<I', 0x24043008)Just to check, this LUT is a single-pad fast-read sequence, so should we mention the fixed read command? E.g. if a board uses quad pads, what will happen.
Can you please rephrase this question ? I cannot make any sense of it.
[...]
Quoted 11 lines
tools/binman/ftest.py fdt fdtmap Extract the devicetree blob from the fdtmap · line 8102
Quoted 4 lines
tools/binman/ftest.py +2
-0@@ -8101,17 +8101,18 @@ fdt fdtmap Extract the devicetree blob from the fdtmap + self._DoTestFile('vendor/nxp_imx8m_fspi.dts') + self._DoTestFile('vendor/nxp_imx8m_fspi_pass.dts')Since binman now generates the header itself, please can you check the output data in the test, e.g. verify the tag at offset 0 and that the mkimage data starts at
0x1000? That would have caught the padding problem above. Also please useassertIn()on str(e.exception) for each failure case, so the test confirms the expected error rather than any ValueError.
Sure, if you can provide actual comprehensible example, I can add that.
In the meantime, I skipped this and sent a V4.
Hi Marek,
Quoted 15 lines · Marek Vasut
On 7/2/26 1:13 PM, Simon Glass wrote:
[...]
Quoted 9 lines
tools/binman/etype/nxp_imx8mimage.py class Entry_nxp_imx8mimage(Entry_mkimage): · line 100
Quoted 5 lines
tools/binman/etype/nxp_imx8mimage.py +3
-0@@ -59,10 +98,52 @@ class Entry_nxp_imx8mimage(Entry_mkimage): + # 0x80 ... lookupTable + spidata += struct.pack('<I', 0x0818040b) + spidata += struct.pack('<I', 0x24043008)Just to check, this LUT is a single-pad fast-read sequence, so should we mention the fixed read command? E.g. if a board uses quad pads, what will happen.
Quoted 1 line
Can you please rephrase this question ? I cannot make any sense of it.
I was trying to figure out what the magic numbers meant.
So I think you have:
FLEXSPI_LUT_SEQ(CMD_SDR, FLEXSPI_1PAD, 0x0B, RADDR_SDR, FLEXSPI_1PAD, 0x18),FLEXSPI_LUT_SEQ(DUMMY_SDR, FLEXSPI_1PAD, 0x08, READ_SDR, FLEXSPI_1PAD, 0x04),
so always using a single pad. But you have the nxp,fspi-flashpadtype property which sems to allow you to select that value, or at least that is my reading of it. So my point was that people might think they can change the pad setting using nxp,fspi-flashpadtype but it won't actually work. Perhaps just a comment would help?
Quoted 14 lines
[...]
Quoted 11 lines
tools/binman/ftest.py fdt fdtmap Extract the devicetree blob from the fdtmap · line 8102
Quoted 4 lines
tools/binman/ftest.py +2
-0@@ -8101,17 +8101,18 @@ fdt fdtmap Extract the devicetree blob from the fdtmap + self._DoTestFile('vendor/nxp_imx8m_fspi.dts') + self._DoTestFile('vendor/nxp_imx8m_fspi_pass.dts')Since binman now generates the header itself, please can you check the output data in the test, e.g. verify the tag at offset 0 and that the mkimage data starts at
0x1000? That would have caught the padding problem above. Also please useassertIn()on str(e.exception) for each failure case, so the test confirms the expected error rather than any ValueError.
Quoted 3 lines
Sure, if you can provide actual comprehensible example, I can add that.
In the meantime, I skipped this and sent a V4.
For checking the error, see testNxpImx8mCSTFastAuth():
with terminal.capture() as (_, stderr):
self._DoTestFile('vendor/nxp_imx8_csf_fast_auth.dts',
force_missing_bintools='cst')
err = stderr.getvalue()
self.assertRegex(err, "Image 'image'.*missing bintools.*: cst")
For reading the file, if you call _DoReadFile() instead of _DoTestFile() it returns the output image, so you can then disect it as you wish. As it is your test checks that the code is exercised, but not as much about what output is produced.
Regards,
Simon