Skip to contentSkip to conversation

wifi: mt76: mt7925: Fix unregister deadlock

PATCH In review JB Tsai 2 participants 2 messages Jun 30 – Jul 6

Subsystems (2)
lore
Share & tools
lore

JB Tsai

author
#0 lore raw

PATCH 1/1 wifi: mt76: mt7925: Fix unregister deadlock

During device shutdown or removal, a deadlock can occur between the PCIe remove path and the driver's asynchronous reset work.

The unregistration path calls napi_disable() before cancelling the reset work. If the reset work runs concurrently, it may re-enable NAPI and schedule it. Because the device is being unregistered, this can lead to NAPI state corruption where NAPI is marked as scheduled but never polled, causing subsequent napi_disable() calls to hang forever.

Fix this by:
1. Moving cancel_work_sync(&dev->reset_work) to the very start of mt7925e_unregister_device(), ensuring it is stopped before NAPI is disabled.
2. Setting the MT76_REMOVED flag early in the PCI remove path to prevent new reset work from being queued.
3. Checking MT76_REMOVED in mt7925_mac_reset_work() and aborting the reset early if the device is being removed.

---
 drivers/net/wireless/mediatek/mt76/mt7925/mac.c | 7 +++++++
 drivers/net/wireless/mediatek/mt76/mt7925/pci.c | 4 ++--
 2 files changed, 9 insertions(+), 2 deletions(-)
drivers/net/wireless/mediatek/mt76/mt7925/mac.c +7 -0
index 0641a7131d7c..1c6d43b162c0 100644
@@ -1319,6 +1319,9 @@ void mt7925_mac_reset_work(struct work_struct *work)
 	cancel_work_sync(&pm->wake_work);
 
 	for (i = 0; i < 10; i++) {
+		if (test_bit(MT76_REMOVED, &dev->mt76.phy.state))
+			goto out;
+
 		mutex_lock(&dev->mt76.mutex);
 		ret = mt792x_dev_reset(dev);
 		mutex_unlock(&dev->mt76.mutex);
@@ -1338,8 +1341,12 @@ void mt7925_mac_reset_work(struct work_struct *work)
 		ieee80211_scan_completed(dev->mphy.hw, &info);
 	}
 
+out:
 	dev->hw_full_reset = false;
 	pm->suspended = false;
+	if (test_bit(MT76_REMOVED, &dev->mt76.phy.state))
+		return;
+
 	ieee80211_wake_queues(hw);
 	ieee80211_iterate_active_interfaces(hw,
 					    IEEE80211_IFACE_ITER_RESUME_ALL,
drivers/net/wireless/mediatek/mt76/mt7925/pci.c +2 -2
index ea64303283ed..978a3f08e080 100644
@@ -43,13 +43,13 @@ static void mt7925e_unregister_device(struct mt792x_dev *dev)
 	if (dev->phy.chip_cap & MT792x_CHIP_CAP_WF_RF_PIN_CTRL_EVT_EN)
 		wiphy_rfkill_stop_polling(hw->wiphy);
 
+	cancel_work_sync(&dev->reset_work);
 	cancel_work_sync(&dev->init_work);
 	mt76_unregister_device(&dev->mt76);
 	mt76_for_each_q_rx(&dev->mt76, i)
 		napi_disable(&dev->mt76.napi[i]);
 	cancel_delayed_work_sync(&pm->ps_work);
 	cancel_work_sync(&pm->wake_work);
-	cancel_work_sync(&dev->reset_work);
 
 	mt7925_tx_token_put(dev);
 	__mt792x_mcu_drv_pmctrl(dev);
@@ -498,8 +498,8 @@ static void mt7925_pci_remove(struct pci_dev *pdev)
 	struct mt76_dev *mdev = pci_get_drvdata(pdev);
 	struct mt792x_dev *dev = container_of(mdev, struct mt792x_dev, mt76);
 
-	mt7925e_unregister_device(dev);
 	set_bit(MT76_REMOVED, &mdev->phy.state);
+	mt7925e_unregister_device(dev);
 	devm_free_irq(&pdev->dev, pdev->irq, dev);
 	mt76_free_device(&dev->mt76);
 	pci_free_irq_vectors(pdev);
Signature · 1 line
2.45.2
Tested-by on v1 1/1
#1 lore raw

I was having issues with the MT7925 on the ASRock B850M with Bluetooth. I tested this and other patches in my investigation.
My issue was a platform bug causing a failure in USB enumeration before the driver path (unrelated to the patch).

I can confirm this patch does not introduce regressions on this platform. I tested system power cycling and suspension, BT/Wifi adapter enable/disable, and also modprobing in/out mt7925{e/u}
Patch applied on top of mailine (7.2 rc1).

Thanks,
Rafael Passos