dt-bindings: arm: ti: Add bindings for PHYTEC AM67x based hardware

Add device tree bindings for the AM67x based phyCORE-AM67x SoM and phyBOARD-Rigel.

---
No changes in v4

 Documentation/devicetree/bindings/arm/ti/k3.yaml | 7 +++++++
 1 file changed, 7 insertions(+)

index 69b5441cbf1a..ae47190d1f82 100644
@@ -222,6 +222,13 @@ properties:
               - ti,j722s-evm
           - const: ti,j722s
 
+      - description: K3 AM67 SoC PHYTEC phyBOARD-Rigel
+        items:
+          - enum:
+              - phytec,am6754-phyboard-rigel
+          - const: phytec,am67-phycore-som
+          - const: ti,j722s
+
       - description: K3 J742S2 SoC
         items:
           - enum:

2.43.0

Add support for the PHYTEC phyCORE-AM67x SoM [1] and the corresponding phyBOARD-Rigel carrier board [2]. The phyCORE-AM67x SoM uses the TI AM67x SoC and can come with different sizes and models of DDR, eMMC, and SPI NOR Flash.

Supported features:
* Audio playback and recording
* CAN
* Debug UART
* eMMC
* Ethernet
* GPIO buttons
* Heartbeat LED
* I2C Current sensor
* I2C EEPROM
* I2C Light sensor
* I2C RTC
* Micro SD card
* SPI NOR flash
* USB

[1] https://www.phytec.com/product/phycore-am67x/
[2] https://www.phytec.com/product/phyboard-am67x-development-kit/

---
Changes in v4:
* Swap the order of SPL, SPKR L and SPR, SPKR R in for the audio card to use the proper sink, source ordering.

 arch/arm64/boot/dts/ti/Makefile               |   1 +
 .../boot/dts/ti/k3-am67-phycore-som.dtsi      | 324 +++++++++++++
 .../boot/dts/ti/k3-am6754-phyboard-rigel.dts  | 431 ++++++++++++++++++
 3 files changed, 756 insertions(+)
 create mode 100644 arch/arm64/boot/dts/ti/k3-am67-phycore-som.dtsi
 create mode 100644 arch/arm64/boot/dts/ti/k3-am6754-phyboard-rigel.dts

index 371f9a043fe5..623ee2369132 100644
@@ -184,6 +184,7 @@ dtb-$(CONFIG_ARCH_K3) += k3-j721s2-evm-pcie1-ep.dtbo
 dtb-$(CONFIG_ARCH_K3) += k3-j721s2-evm-usb0-type-a.dtbo
 
 # Boards with J722s SoC
+dtb-$(CONFIG_ARCH_K3) += k3-am6754-phyboard-rigel.dtb
 dtb-$(CONFIG_ARCH_K3) += k3-am67a-beagley-ai.dtb
 dtb-$(CONFIG_ARCH_K3) += k3-j722s-evm.dtb
 dtb-$(CONFIG_ARCH_K3) += k3-j722s-evm-csi2-quad-rpi-cam-imx219.dtbo

2.43.0

Hello,
I just wanted to check on the status of these patches and see if there is any further action required by me.

Regards,
Nathan

Could you rebase to 7.3-rc1 ? Sorry that this missed the window for what ever reason.

Regards,
Nishanth Menon
Key (0xDDB5849D1736249D) / Fingerprint: F8A2 8693 54EB 8232 17A3  1A34 DDB5 849D 1736 249D
https://ti.com/opensource

No problem, will do.

Regards,
Nathan