ASoC: amd: acp: amd-acp70-acpi-match: Add tas2783 support
Subsystems (3)
PATCH v3 1/1 ASoC: amd: acp: amd-acp70-acpi-match: Add tas2783 support
Add driver data and ACPI match table entries for the TAS2783 on ACP7.0 and ACP7.1 platforms using SoundWire link 0.
---
v3:
- Remove unreferenced link_adr, adr_device and endpoints for tas2783_l0.
v2:
- Add comma for the non-terminator entries.
- Correct endpoints from spk_r_endpoint to spk_l_endpont.
- Add two more devices for current test project.
--- sound/soc/amd/acp/amd-acp70-acpi-match.c | 45 ++++++++++++++++++++++++ 1 file changed, 45 insertions(+)
sound/soc/amd/acp/amd-acp70-acpi-match.c +45 -0
@@ -553,6 +553,46 @@ static const struct snd_soc_acpi_link_adr acp70_rt722_l0_rt1320_l1[] = { {} }; +static const struct snd_soc_acpi_adr_device tas2783_2_adr[] = { + { +/* left */ + .adr =0x00003c0102000001ull , + .num_endpoints =1 , + .endpoints = &spk_l_endpoint, + .name_prefix ="tas2783-1" , + }, + { +/* right */ + .adr =0x00003d0102000001ull , + .num_endpoints =1 , + .endpoints = &spk_l_endpoint, + .name_prefix ="tas2783-2" , + }, + { +/* left */ + .adr =0x0000390102000001ull , + .num_endpoints =1 , + .endpoints = &spk_r_endpoint, + .name_prefix ="tas2783-3" , + }, + { +/* right */ + .adr =0x00003a0102000001ull , + .num_endpoints =1 , + .endpoints = &spk_r_endpoint, + .name_prefix ="tas2783-4" , + }, +}; + +static const struct snd_soc_acpi_link_adr acp70_tas2783_2[] = { + { + .mask =BIT (0 ), + .num_adr =ARRAY_SIZE (tas2783_2_adr), + .adr_d = tas2783_2_adr, + }, + {} +}; +static const struct snd_soc_acpi_adr_device rt1320_0_single_adr[] = { { .adr =0x000030025D132001ull ,
@@ -659,6 +699,11 @@ static const struct snd_soc_acpi_link_adr acp70_rt721_only[] = { };struct snd_soc_acpi_mach snd_soc_acpi_amd_acp70_sdw_machines[] = { + { + .link_mask =BIT (0 ), + .links = acp70_tas2783_2, + .drv_name ="amd_sdw" , + }, { .link_mask =BIT (0 ) |BIT (1 ), .links = acp70_rt1320_l0_rt722_l1,
Signature · 1 line
2.25.1
Mark Brown
maintainerQuoted 1 line · Baojun Xu
ASoC: amd: acp: amd-acp70-acpi-match: Add tas2783 support
Applied to
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git for-7.2
Thanks!
[1/1] ASoC: amd: acp: amd-acp70-acpi-match: Add tas2783 support
https://git.kernel.org/broonie/sound/c/dedf4ccbcbd2
All being well this means that it will be integrated into the linux-next tree (usually sometime in the next 24 hours) and sent to Linus during the next merge window (or sooner if it is a bug fix), however if problems are discovered then the patch may be dropped or reverted.
You may get further e-mails resulting from automated or manual testing and review of the tree, please engage with people reporting problems and send followup patches addressing any issues that are reported if needed.
If any updates are required or you are submitting further changes they should be sent as incremental updates against current git, existing patches will not be replaced.
Please add any relevant lists and maintainers to the CCs when replying to this mail.
Thanks,
Mark