Bluetooth: ISO: backport missed OOB write fix to 6.6.y and 6.1.y
Subsystems (2)
cover Bluetooth: ISO: backport missed OOB write fix to 6.6.y and 6.1.y
Hi Greg, Sasha, Luiz,
Following the guidance Greg gave on my earlier report to [email protected] (subject: "Bluetooth ISO: unbounded memcpy in iso_connect_ind still in stable LTS", 2026-07-02) - that this is a stable backport miss rather than a new security bug - here are the two backports.
Root cause: upstream commit f4da3ee15de99e ("Bluetooth: ISO: Copy BASE if service data matches EIR_BAA_SERVICE_UUID", 2023-09-28, mainline v6.7) addressed the OOB write in iso_connect_ind() but landed without a Fixes: tag, so the stable autoselect bot never picked it up. linux-6.6.y (v6.6.143) and linux-6.1.y (v6.1.176) both still ship the pre-fix code where ev3->length, a __u8 in [0, 255], drives memcpy() directly into iso_pi(sk)->base[248]. Values in [249, 255] overflow 1 to 7 bytes into adjacent fields of struct iso_pinfo, including the low bytes of iso_pi(sk)->conn. FORTIFY_SOURCE flags the write but does not block it.
Affected branch matrix (as of today, 2026-07-02):
* linux-6.6.y (v6.6.143) vulnerable - patch 1/2 * linux-6.1.y (v6.1.176) vulnerable - patch 2/2
* linux-5.15.y NOT affected - iso_connect_ind PA-report handling
was introduced by commit 9c0826310bfb in v6.5, after 5.15.y branched. My earlier email to [email protected] listed 5.15.y in error; please disregard.
Both patches are straight backports of f4da3ee15de99e:
* 1/2 (6.6.y): applies cleanly. eir_get_service_data(), EIR_BAA_SERVICE_UUID, and the eir.h include are already present in the tree, so this is a plain "git apply" of the upstream diff on iso.c.
* 2/2 (6.1.y): needs a small mechanical adjustment - iso.c in 6.1.y does not #include "eir.h" and does not define EIR_BAA_SERVICE_UUID; both are added here to match the upstream commit. eir_get_service_data() itself is already declared in net/bluetooth/eir.h on 6.1.y, so no other files are touched. The put_user() correction that upstream f4da3ee15de99e also folded into iso_sock_getsockopt() is intentionally omitted; that hunk is an unrelated getsockopt correctness fix and dropping it keeps the backport minimal and focused on the OOB write.
Reachability of the underlying bug: any host with an ISO listening socket bound as a broadcast sink (LE Audio / Auracast use case). No pairing required, single HCI_EV_LE_PER_ADV_REPORT event within BLE radio range.
Build verification: net/bluetooth/iso.o builds cleanly in both trees with BT + BT_LE + BT_HCIVHCI enabled on x86_64 defconfig. No new checkpatch errors; the two warnings reported are "unknown commit id" (shallow clone) and one long line in the backport-note paragraph.
I did not include a reproducer or PoC in this series because the fix is the one Luiz/Claudia already landed upstream and there is no dispute about the OOB write - the point of the series is only to carry the same fix into the two LTS branches that missed it. A userspace reproducer against /dev/vhci exists locally and is available on request if the maintainers want to confirm on their side.
Jeremy Erazo (2):
Bluetooth: ISO: Copy BASE if service data matches EIR_BAA_SERVICE_UUID
Bluetooth: ISO: Copy BASE if service data matches EIR_BAA_SERVICE_UUID
net/bluetooth/iso.c | 27 +++++++++++++++++++++------ 1 file changed, 21 insertions(+), 6 deletions(-)
--
2.47.3
PATCH 1/2 Bluetooth: ISO: Copy BASE if service data matches EIR_BAA_SERVICE_UUID
commit f4da3ee15de99efa0a68eae1c4d09b4bcc6d9dcd upstream.
Copy the content of a Periodic Advertisement Report to BASE only if the service UUID is Basic Audio Announcement Service UUID.
[Stable backport rationale]
This fix landed in mainline v6.7 without a Fixes: tag, so the stable autoselect bot never picked it up. linux-6.6.y HEAD (v6.6.143) still carries the pre-fix code at net/bluetooth/iso.c:1935:
if (sk) {
memcpy(iso_pi(sk)->base, ev3->data, ev3->length);
iso_pi(sk)->base_len = ev3->length;
}ev3->length is __u8 and iso_pi(sk)->base is __u8[BASE_MAX_LENGTH] where BASE_MAX_LENGTH is HCI_MAX_PER_AD_LENGTH(252) - EIR_SERVICE_DATA_LENGTH(4) = 248. When an attacker within BLE radio range sends an HCI_EV_LE_PER_ADV_REPORT with ev3->length in [249, 255], the memcpy writes 1 to 7 bytes past the buffer into the trailing fields of struct iso_pinfo, including the low bytes of the iso_pi(sk)->conn pointer. FORTIFY_SOURCE flags the write with "memcpy: detected field-spanning write" but does not block it.
The upstream refactor addresses this by:
1. Filtering via eir_get_service_data() so only the BASE portion of the PA payload is copied.
2. Bounding the copy with base_len <= sizeof(iso_pi(sk)->base).
The refactor applies cleanly against v6.6.143 - eir_get_service_data(), EIR_BAA_SERVICE_UUID, and BASE_MAX_LENGTH already exist in the 6.6.y tree.
Reachability: any host with an ISO listening socket bound as a broadcast sink (LE Audio / Auracast). No pairing required.
--- net/bluetooth/iso.c | 16 ++++++++++++---- 1 file changed, 12 insertions(+), 4 deletions(-)
net/bluetooth/iso.c +12 -4
@@ -14,6 +14,7 @@#include <net/bluetooth/bluetooth.h> #include <net/bluetooth/hci_core.h> #include <net/bluetooth/iso.h> +#include "eir.h" static const struct proto_ops iso_sock_ops;
@@ -47,6 +48,7 @@ static void iso_sock_kill(struct sock *sk);#define EIR_SERVICE_DATA_LENGTH 4#define BASE_MAX_LENGTH (HCI_MAX_PER_AD_LENGTH - EIR_SERVICE_DATA_LENGTH) +#define EIR_BAA_SERVICE_UUID 0x1851/* iso_pinfo flags values */ enum {
@@ -1587,6 +1589,8 @@ static int iso_sock_getsockopt(struct socket *sock, int level, int optname, len = min_t(unsigned int, len, base_len);if (copy_to_user (optval, base, len)) err = -EFAULT ; +if (put_user (len, optlen)) + err = -EFAULT ;break ;
@@ -1928,12 +1932,16 @@ int iso_connect_ind(struct hci_dev *hdev, bdaddr_t *bdaddr, __u8 *flags) ev3 =hci_recv_event_data (hdev,HCI_EV_LE_PER_ADV_REPORT );if (ev3) { +size_t base_len = ev3->length; +u8 *base; + sk =iso_get_sock_listen (&hdev->bdaddr, bdaddr, iso_match_sync_handle_pa_report, ev3); - -if (sk) { -memcpy (iso_pi (sk)->base, ev3->data, ev3->length); -iso_pi (sk)->base_len = ev3->length; + base =eir_get_service_data (ev3->data, ev3->length, +EIR_BAA_SERVICE_UUID , &base_len); +if (base && sk && base_len <=sizeof (iso_pi (sk)->base)) { +memcpy (iso_pi (sk)->base, base, base_len); +iso_pi (sk)->base_len = base_len; } }else { sk =iso_get_sock_listen (&hdev->bdaddr,BDADDR_ANY ,NULL ,NULL );
Signature · 1 line
2.53.0
This is an automated email and please do not reply to this email.
Dear Submitter,
Thank you for submitting the patches to the linux bluetooth mailing list.
While preparing the CI tests, the patches you submitted couldn't be applied to the current HEAD of the repository.
----- Output -----
error: patch failed: net/bluetooth/iso.c:14
error: net/bluetooth/iso.c: patch does not apply
hint: Use 'git am --show-current-patch' to see the failed patch
Please resolve the issue and submit the patches again.
---
Regards,
Linux Bluetooth
PATCH 2/2 Bluetooth: ISO: Copy BASE if service data matches EIR_BAA_SERVICE_UUID
In reply to Jeremy Erazocommit f4da3ee15de99efa0a68eae1c4d09b4bcc6d9dcd upstream.
Copy the content of a Periodic Advertisement Report to BASE only if the service UUID is Basic Audio Announcement Service UUID.
[Stable backport rationale]
This fix landed in mainline v6.7 without a Fixes: tag, so the stable autoselect bot never picked it up. linux-6.1.y HEAD (v6.1.176) still carries the pre-fix code at net/bluetooth/iso.c:1613:
if (sk) {
memcpy(iso_pi(sk)->base, ev3->data, ev3->length);
iso_pi(sk)->base_len = ev3->length;
}ev3->length is __u8 and iso_pi(sk)->base is __u8[BASE_MAX_LENGTH] where BASE_MAX_LENGTH is HCI_MAX_PER_AD_LENGTH(252) - EIR_SERVICE_DATA_LENGTH(4) = 248. When an attacker within BLE radio range sends an HCI_EV_LE_PER_ADV_REPORT with ev3->length in [249, 255], the memcpy writes 1 to 7 bytes past the buffer into the trailing fields of struct iso_pinfo, including the low bytes of the iso_pi(sk)->conn pointer. FORTIFY_SOURCE flags the write with "memcpy: detected field-spanning write" but does not block it.
The upstream refactor addresses this by:
1. Filtering via eir_get_service_data() so only the BASE portion of the PA payload is copied.
2. Bounding the copy with base_len <= sizeof(iso_pi(sk)->base).
Backport notes for 6.1.y:
* eir_get_service_data() is already declared in net/bluetooth/eir.h.
* The header include for eir.h and the EIR_BAA_SERVICE_UUID define are added here, matching the upstream commit.
* The put_user() addition in iso_sock_getsockopt() that was part of the same upstream commit is not included; that hunk is a separate getsockopt correctness fix and is not required for the OOB write fix (getsockopt(BT_ISO_BASE) is a controlled path that already validates optlen against sizeof(iso_pi(sk)->base)). Applying the getsockopt hunk here would risk a user-visible ABI change on a stable branch.
Reachability: any host with an ISO listening socket bound as a broadcast sink (LE Audio / Auracast). No pairing required.
--- net/bluetooth/iso.c | 15 +++++++++++---- 1 file changed, 11 insertions(+), 4 deletions(-)
net/bluetooth/iso.c +11 -4
@@ -14,6 +14,8 @@#include <net/bluetooth/hci_core.h> #include <net/bluetooth/iso.h> +#include "eir.h" +static const struct proto_ops iso_sock_ops;static struct bt_sock_list iso_sk_list = {
@@ -46,6 +48,7 @@ static void iso_sock_kill(struct sock *sk);#define EIR_SERVICE_DATA_LENGTH 4#define BASE_MAX_LENGTH (HCI_MAX_PER_AD_LENGTH - EIR_SERVICE_DATA_LENGTH) +#define EIR_BAA_SERVICE_UUID 0x1851struct iso_pinfo {struct bt_sock bt;
@@ -1606,12 +1609,16 @@ int iso_connect_ind(struct hci_dev *hdev, bdaddr_t *bdaddr, __u8 *flags) ev3 =hci_recv_event_data (hdev,HCI_EV_LE_PER_ADV_REPORT );if (ev3) { +size_t base_len = ev3->length; +u8 *base; + sk =iso_get_sock_listen (&hdev->bdaddr, bdaddr, iso_match_sync_handle_pa_report, ev3); - -if (sk) { -memcpy (iso_pi (sk)->base, ev3->data, ev3->length); -iso_pi (sk)->base_len = ev3->length; + base =eir_get_service_data (ev3->data, ev3->length, +EIR_BAA_SERVICE_UUID , &base_len); +if (base && sk && base_len <=sizeof (iso_pi (sk)->base)) { +memcpy (iso_pi (sk)->base, base, base_len); +iso_pi (sk)->base_len = base_len; } }else { sk =iso_get_sock_listen (&hdev->bdaddr,BDADDR_ANY ,NULL ,NULL );
Signature · 1 line
2.53.0
Sasha Levin
maintainerQuoted 4 lines · Jeremy Erazo
Root cause: upstream commit
f4da3ee15de99e("Bluetooth: ISO: Copy BASE if service data matchesEIR_BAA_SERVICE_UUID", 2023-09-28, mainline v6.7) addressed the OOB write iniso_connect_ind()but landed without a Fixes: tag, so the stable autoselect bot never picked it up.
The upstream SHA referenced here and in the "commit f4da3ee15de99efa0a68eae1c4d09b4bcc6d9dcd upstream." line of both patches does not exist...
Signature · 2 lines
Thanks, Sasha
v2 cover Bluetooth: ISO: backport missed OOB write fix to 6.6.y and 6.1.y
In reply to Jeremy ErazoFrom: Jeremy Erazo <[email protected]>
Hi Greg, Sasha, Luiz,
v2 respin. Two things fixed vs v1:
* The 40-char upstream SHA I put in the "commit <sha> upstream." line of both patches was garbage. The 12-char prefix f4da3ee15de9 was correct but I hand-expanded the tail wrong, so git cat-file on it fails. Corrected to f4da3ee15de9944482382181329bb6d7335ca003. Thanks Sasha for catching that.
* The v1 patches were asymmetric: 6.6.y accidentally carried the put_user() hunk in iso_sock_getsockopt() that 6.1.y omitted. There was no reason for that split; my mistake in v1. v2 drops the put_user hunk from 6.6.y so both branches now carry identical mechanics against their own net/bluetooth/iso.c (add #include "eir.h", add EIR_BAA_SERVICE_UUID define, replace the memcpy() with the eir_get_service_data() + bounds-check pattern). The put_user() correction is a separate getsockopt correctness fix; if that hunk is wanted in stable it should travel as its own patch.
Everything else in v1 still stands: root cause, affected branch matrix, reachability, build verification. Re-stated below for the archive.
Root cause: upstream commit f4da3ee15de9944482382181329bb6d7335ca003 ("Bluetooth: ISO: Copy BASE if service data matches EIR_BAA_SERVICE_UUID", 2023-09-28, mainline v6.7) addressed the OOB write in iso_connect_ind() but landed without a Fixes: tag, so the stable autoselect bot never picked it up. linux-6.6.y (v6.6.143) and linux-6.1.y (v6.1.176) both still ship the pre-fix code where ev3->length, a __u8 in [0, 255], drives memcpy() directly into iso_pi(sk)->base[248]. Values in [249, 255] overflow 1 to 7 bytes into adjacent fields of struct iso_pinfo, including the low bytes of iso_pi(sk)->conn. FORTIFY_SOURCE flags the write but does not block it.
Affected branch matrix (as of today, 2026-07-07):
* linux-6.6.y (v6.6.143) vulnerable - patch 1/2
* linux-6.1.y (v6.1.176) vulnerable - patch 2/2
* linux-5.15.y NOT affected - iso_connect_ind PA-report
handling was introduced by
commit 9c0826310bfb in v6.5,
after 5.15.y branched.Both patches carry the same three hunks against their own iso.c:
* add #include "eir.h"
* add #define EIR_BAA_SERVICE_UUID 0x1851
* replace the unbounded memcpy() with the upstream pattern
(eir_get_service_data() + base_len <= sizeof(iso_pi(sk)->base) guard)
Reachability of the underlying bug: any host with an ISO listening socket bound as a broadcast sink (LE Audio / Auracast use case). No pairing required, single HCI_EV_LE_PER_ADV_REPORT event within BLE radio range.
Build verification: net/bluetooth/iso.o builds cleanly in both trees with BT + BT_LE + BT_HCIVHCI enabled on x86_64 defconfig. No new checkpatch errors; two warnings reported are "unknown commit id" (shallow clone) and one long line in the backport-note paragraph.
I did not include a reproducer or PoC in this series because the fix is the one Luiz/Claudia already landed upstream and there is no dispute about the OOB write. A userspace reproducer against /dev/vhci exists locally and is available on request if the maintainers want to confirm on their side.
Changes in v2:
* Fix incorrect 40-char upstream SHA in the "upstream." line of both patches (thanks Sasha).
* Drop the getsockopt put_user() hunk from 6.6.y so both patches are symmetric.
Jeremy Erazo (2):
Bluetooth: ISO: Copy BASE if service data matches EIR_BAA_SERVICE_UUID
Bluetooth: ISO: Copy BASE if service data matches EIR_BAA_SERVICE_UUID
net/bluetooth/iso.c | 15 +++++++++++---- 1 file changed, 11 insertions(+), 4 deletions(-)
--
2.53.0
PATCH v2 1/2 Bluetooth: ISO: Copy BASE if service data matches EIR_BAA_SERVICE_UUID
From: Jeremy Erazo <[email protected]>
commit f4da3ee15de9944482382181329bb6d7335ca003 upstream.
Copy the content of a Periodic Advertisement Report to BASE only if the service UUID is Basic Audio Announcement Service UUID.
[Stable backport rationale]
This fix landed in mainline v6.7 without a Fixes: tag, so the stable autoselect bot never picked it up. linux-6.6.y HEAD (v6.6.143) still carries the pre-fix code at net/bluetooth/iso.c:1935:
if (sk) {
memcpy(iso_pi(sk)->base, ev3->data, ev3->length);
iso_pi(sk)->base_len = ev3->length;
}ev3->length is __u8 and iso_pi(sk)->base is __u8[BASE_MAX_LENGTH] where BASE_MAX_LENGTH is HCI_MAX_PER_AD_LENGTH(252) - EIR_SERVICE_DATA_LENGTH(4) = 248. When an attacker within BLE radio range sends an HCI_EV_LE_PER_ADV_REPORT with ev3->length in [249, 255], the memcpy writes 1 to 7 bytes past the buffer into the trailing fields of struct iso_pinfo, including the low bytes of the iso_pi(sk)->conn pointer. FORTIFY_SOURCE flags the write with "memcpy: detected field-spanning write" but does not block it.
The upstream refactor addresses this by:
1. Filtering via eir_get_service_data() so only the BASE portion of the PA payload is copied.
2. Bounding the copy with base_len <= sizeof(iso_pi(sk)->base).
Backport notes for 6.6.y:
* eir_get_service_data() is already declared in net/bluetooth/eir.h.
* The header include for eir.h and the EIR_BAA_SERVICE_UUID define are added here, matching the upstream commit.
* The put_user() addition in iso_sock_getsockopt() that was part of the same upstream commit is not included; that hunk is a separate getsockopt correctness fix and is not required for the OOB write fix (getsockopt(BT_ISO_BASE) is a controlled path that already validates optlen against sizeof(iso_pi(sk)->base)). Applying the getsockopt hunk here would risk a user-visible ABI change on a stable branch.
Reachability: any host with an ISO listening socket bound as a broadcast sink (LE Audio / Auracast). No pairing required.
--- net/bluetooth/iso.c | 15 +++++++++++---- 1 file changed, 11 insertions(+), 4 deletions(-)
net/bluetooth/iso.c +11 -4
@@ -15,6 +15,8 @@#include <net/bluetooth/hci_core.h> #include <net/bluetooth/iso.h> +#include "eir.h" +static const struct proto_ops iso_sock_ops;static struct bt_sock_list iso_sk_list = {
@@ -47,6 +49,7 @@ static void iso_sock_kill(struct sock *sk);#define EIR_SERVICE_DATA_LENGTH 4#define BASE_MAX_LENGTH (HCI_MAX_PER_AD_LENGTH - EIR_SERVICE_DATA_LENGTH) +#define EIR_BAA_SERVICE_UUID 0x1851/* iso_pinfo flags values */ enum {
@@ -1928,12 +1931,16 @@ int iso_connect_ind(struct hci_dev *hdev, bdaddr_t *bdaddr, __u8 *flags) ev3 =hci_recv_event_data (hdev,HCI_EV_LE_PER_ADV_REPORT );if (ev3) { +size_t base_len = ev3->length; +u8 *base; + sk =iso_get_sock_listen (&hdev->bdaddr, bdaddr, iso_match_sync_handle_pa_report, ev3); - -if (sk) { -memcpy (iso_pi (sk)->base, ev3->data, ev3->length); -iso_pi (sk)->base_len = ev3->length; + base =eir_get_service_data (ev3->data, ev3->length, +EIR_BAA_SERVICE_UUID , &base_len); +if (base && sk && base_len <=sizeof (iso_pi (sk)->base)) { +memcpy (iso_pi (sk)->base, base, base_len); +iso_pi (sk)->base_len = base_len; } }else { sk =iso_get_sock_listen (&hdev->bdaddr,BDADDR_ANY ,NULL ,NULL );
Signature · 1 line
2.53.0
This is an automated email and please do not reply to this email.
Dear Submitter,
Thank you for submitting the patches to the linux bluetooth mailing list.
While preparing the CI tests, the patches you submitted couldn't be applied to the current HEAD of the repository.
----- Output -----
error: patch failed: net/bluetooth/iso.c:15
error: net/bluetooth/iso.c: patch does not apply
hint: Use 'git am --show-current-patch' to see the failed patch
Please resolve the issue and submit the patches again.
---
Regards,
Linux Bluetooth
Greg Kroah-Hartman
maintainerRe: [PATCH v2 1/2 6.6.y] Bluetooth: ISO: Copy BASE if service data matches EIR_BAA_SERVICE_UUID
In reply to Jeremy Erazo (Devel Group)Quoted 43 lines · Jeremy Erazo (Devel Group)
From: Jeremy Erazo <[email protected]>
commit
f4da3ee15de9944482382181329bb6d7335ca003upstream.Copy the content of a Periodic Advertisement Report to BASE only if the service UUID is Basic Audio Announcement Service UUID.
[Stable backport rationale]
This fix landed in mainline v6.7 without a Fixes: tag, so the stable autoselect bot never picked it up. linux-6.6.y HEAD (v6.6.143) still carries the pre-fix code at
net/bluetooth/iso.c:1935:if (sk) { memcpy(iso_pi(sk)->base, ev3->data, ev3->length); iso_pi(sk)->base_len = ev3->length; }
ev3->lengthis__u8and iso_pi(sk)->base is __u8[BASE_MAX_LENGTH] whereBASE_MAX_LENGTHisHCI_MAX_PER_AD_LENGTH(252)-EIR_SERVICE_DATA_LENGTH(4)= 248. When an attacker within BLE radio range sends anHCI_EV_LE_PER_ADV_REPORTwithev3->lengthin [249, 255], the memcpy writes 1 to 7 bytes past the buffer into the trailing fields of structiso_pinfo, including the low bytes of the iso_pi(sk)->conn pointer.FORTIFY_SOURCEflags the write with "memcpy: detected field-spanning write" but does not block it.The upstream refactor addresses this by:
1. Filtering viaeir_get_service_data()so only the BASE portion of the PA payload is copied.
2. Bounding the copy withbase_len<= sizeof(iso_pi(sk)->base).Backport notes for 6.6.y:
*eir_get_service_data()is already declared innet/bluetooth/eir.h.
* The header include foreir.hand theEIR_BAA_SERVICE_UUIDdefine are added here, matching the upstream commit.
* Theput_user()addition iniso_sock_getsockopt()that was part of the same upstream commit is not included; that hunk is a separate getsockopt correctness fix and is not required for the OOB write fix (getsockopt(BT_ISO_BASE)is a controlled path that already validates optlen against sizeof(iso_pi(sk)->base)). Applying the getsockopt hunk here would risk a user-visible ABI change on a stable branch.
Quoted 8 lines
Reachability: any host with an ISO listening socket bound as a broadcast sink (LE Audio / Auracast). No pairing required.
Fixes 9c0826310bfb ("Bluetooth: ISO: Add support for periodic adv reports processing")Cc [email protected] # 6.6.ySigned-off-by Claudia Draghicescu <[email protected]>Signed-off-by Luiz Augusto von Dentz <[email protected]>[jerazo: backport to 6.6.y; add #include "eir.h" and EIR_BAA_SERVICE_UUID define; drop unrelated getsockopt hunk]
But eir.h was included in the original commit, you added it in a different place from the original, why? Please try to keep changes as close to upstream as possible when backporting.
Please fix this up and resend.
thanks,
greg k-h
PATCH v2 2/2 Bluetooth: ISO: Copy BASE if service data matches EIR_BAA_SERVICE_UUID
In reply to Jeremy Erazo (Devel Group)From: Jeremy Erazo <[email protected]>
commit f4da3ee15de9944482382181329bb6d7335ca003 upstream.
Copy the content of a Periodic Advertisement Report to BASE only if the service UUID is Basic Audio Announcement Service UUID.
[Stable backport rationale]
This fix landed in mainline v6.7 without a Fixes: tag, so the stable autoselect bot never picked it up. linux-6.1.y HEAD (v6.1.176) still carries the pre-fix code at net/bluetooth/iso.c:1613:
if (sk) {
memcpy(iso_pi(sk)->base, ev3->data, ev3->length);
iso_pi(sk)->base_len = ev3->length;
}ev3->length is __u8 and iso_pi(sk)->base is __u8[BASE_MAX_LENGTH] where BASE_MAX_LENGTH is HCI_MAX_PER_AD_LENGTH(252) - EIR_SERVICE_DATA_LENGTH(4) = 248. When an attacker within BLE radio range sends an HCI_EV_LE_PER_ADV_REPORT with ev3->length in [249, 255], the memcpy writes 1 to 7 bytes past the buffer into the trailing fields of struct iso_pinfo, including the low bytes of the iso_pi(sk)->conn pointer. FORTIFY_SOURCE flags the write with "memcpy: detected field-spanning write" but does not block it.
The upstream refactor addresses this by:
1. Filtering via eir_get_service_data() so only the BASE portion of the PA payload is copied.
2. Bounding the copy with base_len <= sizeof(iso_pi(sk)->base).
Backport notes for 6.1.y:
* eir_get_service_data() is already declared in net/bluetooth/eir.h.
* The header include for eir.h and the EIR_BAA_SERVICE_UUID define are added here, matching the upstream commit.
* The put_user() addition in iso_sock_getsockopt() that was part of the same upstream commit is not included; that hunk is a separate getsockopt correctness fix and is not required for the OOB write fix (getsockopt(BT_ISO_BASE) is a controlled path that already validates optlen against sizeof(iso_pi(sk)->base)). Applying the getsockopt hunk here would risk a user-visible ABI change on a stable branch.
Reachability: any host with an ISO listening socket bound as a broadcast sink (LE Audio / Auracast). No pairing required.
--- net/bluetooth/iso.c | 15 +++++++++++---- 1 file changed, 11 insertions(+), 4 deletions(-)
net/bluetooth/iso.c +11 -4
@@ -14,6 +14,8 @@#include <net/bluetooth/hci_core.h> #include <net/bluetooth/iso.h> +#include "eir.h" +static const struct proto_ops iso_sock_ops;static struct bt_sock_list iso_sk_list = {
@@ -46,6 +48,7 @@ static void iso_sock_kill(struct sock *sk);#define EIR_SERVICE_DATA_LENGTH 4#define BASE_MAX_LENGTH (HCI_MAX_PER_AD_LENGTH - EIR_SERVICE_DATA_LENGTH) +#define EIR_BAA_SERVICE_UUID 0x1851struct iso_pinfo {struct bt_sock bt;
@@ -1606,12 +1609,16 @@ int iso_connect_ind(struct hci_dev *hdev, bdaddr_t *bdaddr, __u8 *flags) ev3 =hci_recv_event_data (hdev,HCI_EV_LE_PER_ADV_REPORT );if (ev3) { +size_t base_len = ev3->length; +u8 *base; + sk =iso_get_sock_listen (&hdev->bdaddr, bdaddr, iso_match_sync_handle_pa_report, ev3); - -if (sk) { -memcpy (iso_pi (sk)->base, ev3->data, ev3->length); -iso_pi (sk)->base_len = ev3->length; + base =eir_get_service_data (ev3->data, ev3->length, +EIR_BAA_SERVICE_UUID , &base_len); +if (base && sk && base_len <=sizeof (iso_pi (sk)->base)) { +memcpy (iso_pi (sk)->base, base, base_len); +iso_pi (sk)->base_len = base_len; } }else { sk =iso_get_sock_listen (&hdev->bdaddr,BDADDR_ANY ,NULL ,NULL );
Signature · 1 line
2.53.0
Sasha Levin
maintainerQuoted 5 lines
Root cause: upstream commit
f4da3ee15de9944482382181329bb6d7335ca003("Bluetooth: ISO: Copy BASE if service data matchesEIR_BAA_SERVICE_UUID", 2023-09-28, mainline v6.7) addressed the OOB write iniso_connect_ind()but landed without a Fixes: tag, so the stable autoselect bot never picked it up.
The upstream commit cherry-picks cleanly onto both trees, so I've queued f4da3ee15de994 directly for 6.6 and 6.1 instead of the v2 patches. That keeps the eir.h include placement identical to upstream (addressing Greg's review) and also carries the getsockopt put_user() hunk as part of the original commit. No need for a v3.
Signature · 2 lines
Thanks, Sasha