Skip to contentSkip to conversation

man: ethtool: link 10000baseCR to SFF-8431, Appendix-E SFP+ DA

PATCH In review D H, Siddaraju 2 participants 2 messages Jul 2

Subsystems (2)
lore
Share & tools
lore
#0 lore raw

PATCH 1/1 man: ethtool: link 10000baseCR to SFF-8431, Appendix-E SFP+ DA

From: Siddaraju DH <[email protected]>

Annotate the 10000baseCR entry in the advertise mask table so users understand what physical media this mode it actually represents.

10000baseCR does not correspond to any IEEE 802.3 *base-CR PMD. It has no autonegotiation, no link training, and no mandatory FEC. The industry standard for this media type is SFF-8431 Appendix-E Direct Attach cable, also known as 10G_SFI_DA.

This change follows the conversation from netdev mail thread with
subject: "the confusing 10000base_CR. Shouldn't it be 10000_SFI_DA?"

---
 ethtool.8.in | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
ethtool.8.in +1 -1
index 3173287..604de9e 100644
@@ -937,7 +937,7 @@ lB	l	lB.
 0x40000	10000baseKX4 Full
 0x80000	10000baseKR Full
 0x100000	10000baseR_FEC
-0x40000000000	10000baseCR Full
+0x40000000000	10000baseCR Full	(a.k.a 10G_SFI_DA, SFF-8431 Appendix-E)
 0x80000000000	10000baseSR Full
 0x100000000000	10000baseLR Full
 0x200000000000	10000baseLRM Full
Signature · 1 line
2.25.1
Reviewed-by on v1 1/1
#1 lore raw
Quoted 10 lines · Siddaraju

From: Siddaraju DH <[email protected]>

Annotate the 10000baseCR entry in the advertise mask table so users understand what physical media this mode it actually represents.

10000baseCR does not correspond to any IEEE 802.3 *base-CR PMD. It has no autonegotiation, no link training, and no mandatory FEC. The industry standard for this media type is SFF-8431 Appendix-E Direct Attach cable, also known as 10G_SFI_DA.

Quoted 4 lines

This change follows the conversation from netdev mail thread with
subject: "the confusing 10000base_CR. Shouldn't it be 10000_SFI_DA?"

Andrew