PCI: mediatek: Add support for EcoNet EN7528 SoC
Subsystems (5)
PATCH v11 1/1 PCI: mediatek: Add support for EcoNet EN7528 SoC
Add support for the PCIe present on the EcoNet EN7528 (and EN751221) SoCs.
These SoCs have a mix of Gen1 and Gen2 capable ports, but the Gen2 ports require re-training after startup.
---
Rebased on bcabbbd29c53 ("Merge branch 'pci/controller/rzg3s-host'")
v10: https://lore.kernel.org/linux-mips/[email protected]/
--- drivers/pci/controller/Kconfig | 2 +- drivers/pci/controller/pcie-mediatek.c | 154 +++++++++++++++++++++++++ 2 files changed, 155 insertions(+), 1 deletion(-)
drivers/pci/controller/Kconfig +1 -1
@@ -209,7 +209,7 @@ config PCI_MVEBU config PCIE_MEDIATEK tristate "MediaTek PCIe controller" - depends on ARCH_AIROHA || ARCH_MEDIATEK || COMPILE_TEST + depends on ARCH_AIROHA || ARCH_MEDIATEK || ECONET || COMPILE_TEST depends on OF depends on PCI_MSI select IRQ_MSI_LIB
drivers/pci/controller/pcie-mediatek.c +154 -0
209 lines not on this page · raw message
base-commit: bcabbbd29c53a5b07eff29f8861d045b2c709c26
Signature · 1 line
2.39.5
[email protected]
AI reviewThank you for your contribution! Sashiko AI review found 3 potential issue(s) to consider: - [High] PCIe link retraining is initiated after endpoint devices are registered, causing a race condition…
Thank you for your contribution! Sashiko AI review found 3 potential issue(s) to consider:
- [High] PCIe link retraining is initiated after endpoint devices are registered, causing a race condition where drivers may probe while the link is down.
- [Medium] Failure to retrain one PCIe root port aborts the retraining loop, preventing subsequent independent ports from being retrained.
- [Medium] Driver degrades functionality when built as a module due to missing EXPORT_SYMBOL for pcie_retrain_link().
--
commit d5f03f20dd1953eb7241e17dbd765b2b467f01c7
Author: Caleb James DeLisle <[email protected]>
PCI: mediatek: Add support for EcoNet EN7528 SoC
This adds support for the PCIe controller present on the EcoNet EN7528 and EN751221 SoCs. These SoCs contain a mix of Gen1 and Gen2 ports, where Gen2 ports require retraining after startup.
Quoted 4 lines
drivers/pci/controller/pcie-mediatek.c +0
-0
[ ... ]
Quoted 6 lines
drivers/pci/controller/pcie-mediatek.c +2
-0@@ -756,6 +767,134 @@ static int mtk_pcie_startup_port_v2(struct mtk_pcie_port *port)return 0 ; } +static int mtk_pcie_startup_port_en7528 (struct mtk_pcie_port *port) +{
[ ... ]
Quoted 31 lines
drivers/pci/controller/pcie-mediatek.c +31
-0+if (!IS_BUILTIN (CONFIG_PCIE_MEDIATEK )) +dev_info (pcie->dev, +"module not built-in, Gen2 unavailable even if supported\n" ); + +return 0 ; +} + +/** +* mtk_pcie_retrain - retrain the root bridge link if needed +* @dev: The device, for use in logging +* @host: The host bridge which contains the link +* +* Due to what is likely a hardware bug, some devices (notably EcoNet) start up +* as Gen1, and must be retrained once after initial configuration in order to +* reach Gen2. +* +* These devices always self-identify as Gen2 capable, but sometimes the PHY is +* only capable of Gen1 operation, and sometimes the PCIe card (e.g. wifi) is +* only Gen1 capable. Therefore it is most convenient to retrain every port +* after startup. +*/ +static int mtk_pcie_retrain (struct device *dev,struct pci_host_bridge *host) +{ +struct pci_dev *rp; +int ret = -ENOENT ; +u16 lnksta =0 ; +u32 speed; + +/* Should already have been warned about during startup_port */ +if (!IS_BUILTIN (CONFIG_PCIE_MEDIATEK )) +return 0 ;
drivers/pci/controller/pcie-mediatek.c static int mtk_pcie_startup_port_v2(struct mtk_pcie_port *port) · line 881
Quoted 10 lines
drivers/pci/controller/pcie-mediatek.c +10
-0+ +guard (rwsem_read)(&pci_bus_sem); + +for_each_pci_bridge (rp, host->bus) { +if (pci_pcie_type (rp) !=PCI_EXP_TYPE_ROOT_PORT ) +continue ; + +#if IS_BUILTIN (CONFIG_PCIE_MEDIATEK ) + ret =pcie_retrain_link (rp, true); +#endif
[Severity: Medium]
Does skipping the pcie_retrain_link() call for module builds unintentionally degrade functionality?
If this driver requires pcie_retrain_link() for Gen2 speeds, would it be more appropriate to export pcie_retrain_link() in the PCI core instead of guarding the call and silently falling back to Gen1 when compiled as a module?
drivers/pci/controller/pcie-mediatek.c static int mtk_pcie_startup_port_v2(struct mtk_pcie_port *port) · line 885
Quoted 4 lines
drivers/pci/controller/pcie-mediatek.c +4
-0+ +if (ret) +return dev_err_probe (&rp->dev, ret, +"failed to retrain port\n" );
[Severity: Medium]
If pcie_retrain_link() fails on one root port, this early return will abort the for_each_pci_bridge() iteration.
Will this prevent subsequent independent root ports from being retrained?
Could this use a continue statement instead to ensure remaining ports are still processed?
Quoted 11 lines
drivers/pci/controller/pcie-mediatek.c +11
-0+ +pcie_capability_read_word (rp,PCI_EXP_LNKSTA , &lnksta); + speed = lnksta &PCI_EXP_LNKSTA_CLS ; + +pci_info (rp,"link retrained, speed %s\n" , +pci_speed_string (pcie_link_speed[speed])); + + } + +return 0 ; +}
[ ... ]
drivers/pci/controller/pcie-mediatek.c static int mtk_pcie_probe(struct platform_device *pdev) · line 1316
Quoted 10 lines
drivers/pci/controller/pcie-mediatek.c +6
-0@@ -1169,6 +1308,13 @@ static int mtk_pcie_probe(struct platform_device *pdev)if (err) goto put_resources; +/* +* Ignore error because pci_host_probe() was already called, and in any +* case it is possible that the port will still work as Gen1. +*/ +if (pcie->soc->quirks &MTK_PCIE_RETRAIN ) +mtk_pcie_retrain (dev, host);
[Severity: High]
Since pci_host_probe() was already called, downstream endpoint devices are already registered and their drivers might be concurrently executing their probe routines.
Could mtk_pcie_retrain() drop the physical link while an endpoint driver is performing MMIO reads or writes?
This concurrent access during link downtime could result in master aborts (returning 0xFFFFFFFF) and cause driver initialization failures or system crashes.
Is it possible to perform link retraining prior to registering the downstream devices?
Quoted 4 lines
drivers/pci/controller/pcie-mediatek.c +1
-0+return 0 ; put_resources:
Signature · 1 line
Sashiko AI review · https://sashiko.dev/#/patchset/[email protected]?part=1
Quoted 4 lines · Caleb James DeLisle
Add support for the PCIe present on the EcoNet EN7528 (and EN751221) SoCs.
These SoCs have a mix of Gen1 and Gen2 capable ports, but the Gen2 ports require re-training after startup.
Applied, thanks!
[1/1] PCI: mediatek: Add support for EcoNet EN7528 SoC
commit: 2077ccb9baa2cbbbccf5f0d8c2196dd9d5e43399
Best regards,
Signature · 1 line
மணிவண்ணன் சதாசிவம்
Quoted 6 lines · Manivannan Sadhasivam
Quoted 4 lines · Caleb James DeLisle
Add support for the PCIe present on the EcoNet EN7528 (and EN751221) SoCs.
These SoCs have a mix of Gen1 and Gen2 capable ports, but the Gen2 ports require re-training after startup.
Applied, thanks!
Thank YOU for all of the help getting it over the line!
Caleb
Quoted 5 lines
[1/1] PCI: mediatek: Add support for EcoNet EN7528 SoC
commit: 2077ccb9baa2cbbbccf5f0d8c2196dd9d5e43399Best regards,