iio: imu: fix typos in comments
Subsystems (5)
A message that is not in the archive (sent off-list or not yet received): [email protected]
PATCH v2 1/1 iio: imu: fix typos in comments
Fix several comment misspellings across drivers/iio/imu/, found with codespell and manual review. The corrected words are coefficient, temperature, sensitivity, access, chosen, and buses.
---
v2: expand from the single adis16480 temperature fix (v1) to cover all
comment typos in drivers/iio/imu/, as requested by Andy Shevchenko. The Reviewed-by is carried over as the changes remain trivial typo fixes.
drivers/iio/imu/adis16480.c | 4 ++-- drivers/iio/imu/bmi160/bmi160_core.c | 2 +- drivers/iio/imu/fxos8700_core.c | 2 +- drivers/iio/imu/inv_icm42600/inv_icm42600_buffer.c | 2 +- drivers/iio/imu/inv_icm45600/inv_icm45600.h | 2 +- drivers/iio/imu/inv_mpu6050/inv_mpu_magn.c | 4 ++-- 6 files changed, 8 insertions(+), 8 deletions(-)
drivers/iio/imu/adis16480.c +2 -2
@@ -111,7 +111,7 @@#define ADIS16480_REG_SERIAL_NUM ADIS16480_REG(0x04, 0x20) -/* Each filter coefficent bank spans two pages */ +/* Each filter coefficient bank spans two pages */ #define ADIS16480_FIR_COEF (page) (x < 60 ? ADIS16480_REG(page, (x) + 8) : \ ADIS16480_REG((page) + 1, (x) - 60 + 8))#define ADIS16480_FIR_COEF_A (x) ADIS16480_FIR_COEF(0x05, (x))
@@ -1468,7 +1468,7 @@ static irqreturn_t adis16480_trigger_handler(int irq, void *p)* We need to perform the padding to have the buffer * elements naturally aligned in case there are any * 32-bit storage size channels enabled which are added -* in the buffer after the temprature data. In case +* in the buffer after the temperature data. In case * there is no data being added after the temperature * data, the padding is harmless. */
drivers/iio/imu/bmi160/bmi160_core.c +1 -1
@@ -5,7 +5,7 @@* Copyright (c) 2016, Intel Corporation. * Copyright (c) 2019, Martin Kelly. * -* IIO core driver for BMI160, with support for I2C/SPI busses +* IIO core driver for BMI160, with support for I2C/SPI buses * * TODO: magnetometer, hardware FIFO */
drivers/iio/imu/fxos8700_core.c +1 -1
@@ -2,7 +2,7 @@/* * FXOS8700 - NXP IMU (accelerometer plus magnetometer) * -* IIO core driver for FXOS8700, with support for I2C/SPI busses +* IIO core driver for FXOS8700, with support for I2C/SPI buses * * TODO: Buffer, trigger, and IRQ support */
drivers/iio/imu/inv_icm42600/inv_icm42600_buffer.c +1 -1
@@ -186,7 +186,7 @@ static unsigned int inv_icm42600_wm_truncate(unsigned int watermark,* smallest latency but this is not as simple as choosing the smallest watermark * value. Latency depends on watermark and ODR. It requires several steps: * 1) compute gyro and accel latencies and choose the smallest value. -* 2) adapt the choosen latency so that it is a multiple of both gyro and accel +* 2) adapt the chosen latency so that it is a multiple of both gyro and accel * ones. Otherwise it is possible that you don't meet a requirement. (for * example with gyro @100Hz wm 4 and accel @100Hz with wm 6, choosing the * value of 4 will not meet accel latency requirement because 6 is not a
drivers/iio/imu/inv_icm45600/inv_icm45600.h +1 -1
@@ -190,7 +190,7 @@ struct inv_icm45600_sensor_state {#define INV_ICM45600_REG_IREG_ADDR 0x7C#define INV_ICM45600_REG_IREG_DATA 0x7E -/* Direct acces registers */ +/* Direct access registers */ #define INV_ICM45600_REG_MISC2 0x007F#define INV_ICM45600_MISC2_SOFT_RESET BIT(1)
drivers/iio/imu/inv_mpu6050/inv_mpu_magn.c +2 -2
@@ -106,9 +106,9 @@ static int inv_magn_init(struct inv_mpu6050_state *st)return ret;/* -* Sensor sentivity +* Sensor sensitivity * 1 uT = 0.01 G and value is in micron (1e6) -* sensitvity = x uT * 0.01 * 1e6 +* sensitivity = x uT * 0.01 * 1e6 */ switch (st->chip_type) {case INV_MPU9150 :
Signature · 1 line
2.54.0
Jonathan Cameron
maintainerQuoted 6 lines · On Wed, 1 Jul 2026 21:56:59 +0530 Anas Khan <[email protected]> wrote:
Fix several comment misspellings across
drivers/iio/imu/, found with codespell and manual review. The corrected words are coefficient, temperature, sensitivity, access, chosen, and buses.Signed-off-by Anas Khan <[email protected]>Reviewed-by Andy Shevchenko <[email protected]>
Andy can confirm, but generally adding more typo fixes that Andy has not reviewed would be a reason to drop his RB tag.
Changes look fine, but I'll wait on a reply from Andy to apply this.
Thanks,
Jonathan
Quoted 103 lines
---
v2: expand from the single adis16480 temperature fix (v1) to cover all
comment typos indrivers/iio/imu/, as requested by Andy Shevchenko. The Reviewed-by is carried over as the changes remain trivial typo fixes.drivers/iio/imu/adis16480.c | 4 ++-- drivers/iio/imu/bmi160/bmi160_core.c | 2 +- drivers/iio/imu/fxos8700_core.c | 2 +- drivers/iio/imu/inv_icm42600/inv_icm42600_buffer.c | 2 +- drivers/iio/imu/inv_icm45600/inv_icm45600.h | 2 +- drivers/iio/imu/inv_mpu6050/inv_mpu_magn.c | 4 ++-- 6 files changed, 8 insertions(+), 8 deletions(-)drivers/iio/imu/adis16480.c +2
-2@@ -111,7 +111,7 @@#define ADIS16480_REG_SERIAL_NUM ADIS16480_REG(0x04, 0x20) -/* Each filter coefficent bank spans two pages */ +/* Each filter coefficient bank spans two pages */ #define ADIS16480_FIR_COEF (page) (x < 60 ? ADIS16480_REG(page, (x) + 8) : \ ADIS16480_REG((page) + 1, (x) - 60 + 8))#define ADIS16480_FIR_COEF_A (x) ADIS16480_FIR_COEF(0x05, (x))@@ -1468,7 +1468,7 @@ static irqreturn_t adis16480_trigger_handler(int irq, void *p)* We need to perform the padding to have the buffer * elements naturally aligned in case there are any * 32-bit storage size channels enabled which are added -* in the buffer after the temprature data. In case +* in the buffer after the temperature data. In case * there is no data being added after the temperature * data, the padding is harmless. */ drivers/iio/imu/bmi160/bmi160_core.c +1
-1@@ -5,7 +5,7 @@* Copyright (c) 2016, Intel Corporation. * Copyright (c) 2019, Martin Kelly. * -* IIO core driver for BMI160, with support for I2C/SPI busses +* IIO core driver for BMI160, with support for I2C/SPI buses * * TODO: magnetometer, hardware FIFO */ drivers/iio/imu/fxos8700_core.c +1
-1@@ -2,7 +2,7 @@/* * FXOS8700 - NXP IMU (accelerometer plus magnetometer) * -* IIO core driver for FXOS8700, with support for I2C/SPI busses +* IIO core driver for FXOS8700, with support for I2C/SPI buses * * TODO: Buffer, trigger, and IRQ support */ drivers/iio/imu/inv_icm42600/inv_icm42600_buffer.c +1
-1@@ -186,7 +186,7 @@ static unsigned int inv_icm42600_wm_truncate(unsigned int watermark,* smallest latency but this is not as simple as choosing the smallest watermark * value. Latency depends on watermark and ODR. It requires several steps: * 1) compute gyro and accel latencies and choose the smallest value. -* 2) adapt the choosen latency so that it is a multiple of both gyro and accel +* 2) adapt the chosen latency so that it is a multiple of both gyro and accel * ones. Otherwise it is possible that you don't meet a requirement. (for * example with gyro @100Hz wm 4 and accel @100Hz with wm 6, choosing the * value of 4 will not meet accel latency requirement because 6 is not a drivers/iio/imu/inv_icm45600/inv_icm45600.h +1
-1@@ -190,7 +190,7 @@ struct inv_icm45600_sensor_state {#define INV_ICM45600_REG_IREG_ADDR 0x7C#define INV_ICM45600_REG_IREG_DATA 0x7E -/* Direct acces registers */ +/* Direct access registers */ #define INV_ICM45600_REG_MISC2 0x007F#define INV_ICM45600_MISC2_SOFT_RESET BIT(1)drivers/iio/imu/inv_mpu6050/inv_mpu_magn.c +2
-2@@ -106,9 +106,9 @@ static int inv_magn_init(struct inv_mpu6050_state *st)return ret;/* -* Sensor sentivity +* Sensor sensitivity * 1 uT = 0.01 G and value is in micron (1e6) -* sensitvity = x uT * 0.01 * 1e6 +* sensitivity = x uT * 0.01 * 1e6 */ switch (st->chip_type) {case INV_MPU9150 :
Quoted 7 lines · Jonathan Cameron
Quoted 4 lines · On Wed, 1 Jul 2026 21:56:59 +0530 Anas Khan <[email protected]> wrote:
Fix several comment misspellings across
drivers/iio/imu/, found with codespell and manual review. The corrected words are coefficient, temperature, sensitivity, access, chosen, and buses.
Quoted 5 lines
Quoted 2 lines
Signed-off-by Anas Khan <[email protected]>Reviewed-by Andy Shevchenko <[email protected]>Andy can confirm, but generally adding more typo fixes that Andy has not reviewed would be a reason to drop his RB tag.
Right, please don't add tags when the excessive changes been made.
Quoted 2 lines
Changes look fine, but I'll wait on a reply from Andy to apply this.
...
Yeah, everything looks fine.
Signature · 2 lines
With Best Regards, Andy Shevchenko
Jonathan Cameron
maintainerQuoted 14 lines · On Thu, 2 Jul 2026 10:22:21 +0300 Andy Shevchenko…
Quoted 7 lines · Jonathan Cameron
Quoted 4 lines · On Wed, 1 Jul 2026 21:56:59 +0530 Anas Khan <[email protected]> wrote:
Fix several comment misspellings across
drivers/iio/imu/, found with codespell and manual review. The corrected words are coefficient, temperature, sensitivity, access, chosen, and buses.Quoted 5 lines
Quoted 2 lines
Signed-off-by Anas Khan <[email protected]>Reviewed-by Andy Shevchenko <[email protected]>Andy can confirm, but generally adding more typo fixes that Andy has not reviewed would be a reason to drop his RB tag.
Quoted 9 lines
Right, please don't add tags when the excessive changes been made.
Quoted 2 lines
Changes look fine, but I'll wait on a reply from Andy to apply this.
...
Yeah, everything looks fine.
Applied to the testing branch of iio.git with Andy's tag there given the looks fine above.
Thanks,
Jonathan