arm: mvebu: Update docs for Allied Telesis x220
PATCH v2 1/1 arm: mvebu: Update docs for Allied Telesis x220
The current documentation doesn't work as-is for extracting the DDR training binary from the vendor bootloader. There are some seemingly undocumented alignment requirements that we need to meet by padding the binary file. Add some instructions on how to do this with objcopy. Also fix a minor spelling mistake while we're here.
---
Notes:
Changes in v2:
- Remove binary file accidentally included in v1
doc/board/alliedtelesis/x220.rst | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-)
doc/board/alliedtelesis/x220.rst +3 -1
@@ -18,7 +18,7 @@ markets. - GS980M/52 - x230-52 -DDR Traning (binhdr) +DDR Training (binhdr) -------------------- The AlleyCat3 uses a binary blob for it's DDR training. This is launched by
@@ -37,3 +37,5 @@ image .. prompt:: bash $ ./tools/dumpimage -T kwbimage -p 1 -o board/alliedtelesis/x220/binary.0 u-boot.kwb + arm-softfloat-linux-gnueabi-objcopy -I binary -O binary --pad-to=0x12fcc \ + board/alliedtelesis/x220/binary.0 board/alliedtelesis/x220/binary.0
Signature · 1 line
2.54.0
Quoted 7 lines · Chris Packham
The current documentation doesn't work as-is for extracting the DDR training binary from the vendor bootloader. There are some seemingly undocumented alignment requirements that we need to meet by padding the binary file. Add some instructions on how to do this with objcopy. Also fix a minor spelling mistake while we're here.
Signed-off-by Chris Packham <[email protected]>
Thanks,
Stefan
Quoted 28 lines
---
Notes:
Changes in v2:
- Remove binary file accidentally included in v1doc/board/alliedtelesis/x220.rst | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-)doc/board/alliedtelesis/x220.rst +3
-1@@ -18,7 +18,7 @@ markets. - GS980M/52 - x230-52 -DDR Traning (binhdr) +DDR Training (binhdr) -------------------- The AlleyCat3 uses a binary blob for it's DDR training. This is launched by@@ -37,3 +37,5 @@ image .. prompt:: bash $ ./tools/dumpimage -T kwbimage -p 1 -o board/alliedtelesis/x220/binary.0 u-boot.kwb + arm-softfloat-linux-gnueabi-objcopy -I binary -O binary --pad-to=0x12fcc \ + board/alliedtelesis/x220/binary.0 board/alliedtelesis/x220/binary.0
Quoted 7 lines · Chris Packham
The current documentation doesn't work as-is for extracting the DDR training binary from the vendor bootloader. There are some seemingly undocumented alignment requirements that we need to meet by padding the binary file. Add some instructions on how to do this with objcopy. Also fix a minor spelling mistake while we're here.
Signed-off-by Chris Packham <[email protected]>
Applied to u-boot-marvell/main
Thanks,
Stefan