mm/damon: introduce data attributes only monitoring
Subsystems (4)
SJ Park
maintainercover mm/damon: introduce data attributes only monitoring
TL;DR: Introduce a way to get DAMON's best effort accuracy monitoring of user-demanding non-access data attributes.
Background
==========
DAMON was initially designed for only access monitoring. It turned out users want to get the information together with more data attributes. For example, some users want to know how much of a hot memory region belongs to huge pages or specific cgroups. Page level properties based monitoring was introduced with commit 626ffabe67c2 ("mm/damon: clarify trying vs applying on damos_stat kernel-doc comment") to fill the gap. Because it works only at snapshot level and snapshot capturing in the mode can induce high overhead, commit 45c49d9fd608 ("mm/damon/core:
introduce struct damon_probe") introduced data attributes monitoring.
Data attributes monitoring treats the attributes as only additional and subordinate information. Data access monitoring is always turned on, and regions are adjusted for best accuracy of the access information. In some cases, users may be primarily interested in the attributes more than the access. They might even not care about the access information at all. Because DAMON treats data accesses as the only primary information, such users cannot get high quality attributes information.
Design and Implementation
=========================
Introduce another way for treating data attributes as the primary information. Add 'weight' property to each data attribute probe. When any of the weights are set, the mode is enabled. Data access monitoring is completely turned off in the mode. For region adjustment, the weighted sum of probe hit counters is used instead of the nr_accesses.
Using the weights, users can specify to what attributes they are interested in to what degree. DAMON will adjust the regions and provide the best-effort quality monitoring that is optimized for the user demands.
Extend damon_operations for efficient use of probe hits. Update regions merge and kdamond main logic to support the new mode. Add a new struct field and a sysfs file for API callers and ABI users, respectively.
Test
====
On ~7 GiB memory idle system, run a simple AI-assisted program. The program allocates and faults 2 GiB anonymous pages. Then, it does nothing but wait until the user terminates it. Hence, the system ~2 GiB of anonymous pages with no active accesses.
Monitor the distribution of the anonymous pages using DAMON attributes monitoring mode, using DAMON user-space tool, damo [1].
$ sudo ./damo start --probe_filter allow anon
$ sudo ./damo report access --dont_merge_regions
heatmap: 00000000000000000000000000000000000000000000000399999995111111146666666666666666
# min/max temperatures: -2,470,000,000, -1,620,000,000, column size: 99.800 MiB
intervals: sample 5 ms aggr 100 ms (max access hz 200)
# <start> <size> <freq> <age> <probe hits>
0 4.000 KiB 79.840 MiB 0 hz 24.700 s 2
1 79.844 MiB 718.562 MiB 0 hz 24.700 s 8
2 798.406 MiB 793.148 MiB 0 hz 24.700 s 7
3 1.554 GiB 797.828 MiB 0 hz 24.700 s 7
4 2.333 GiB 794.668 MiB 0 hz 24.600 s 8
5 3.109 GiB 791.117 MiB 0 hz 24.500 s 0
6 3.882 GiB 785.312 MiB 0 hz 24 s 2
7 4.649 GiB 787.867 MiB 0 hz 16.200 s 6
8 5.418 GiB 784.477 MiB 0 hz 23.300 s 6
9 6.184 GiB 783.820 MiB 0 hz 18.200 s 9
10 6.950 GiB 797.730 MiB 0 hz 18.900 s 7
11 7.729 GiB 69.625 MiB 0 hz 18.900 s 0
memory bw estimate: 0 B per second
total size: 7.797 GiB
record DAMON intervals: sample 5 ms, aggr 100 msNote that the line after the line starting with "intervals:" is not provided by the current version of 'damo'. I manually added the legends line for easier understanding of these results.
Each of the 12 lines after the legend line shows the DAMON-found regions. Each line shows 1) index of the region, 2) start address of the region, 3) size of the region, 4) access frequency of the region, 5) age (how long the access frequency on the region was kept) of the region, and finally 6) the probe hit count.
Because data access is the primary information that adjusts region for, and there is only nearly zero access on the system, regions are naively adjusted with the same size. Still <probe hits> show different distribution of the anonymous pages, but it is obviously very rough information.
Switch to the attributes only mode and show how it changes the picture:
$ sudo ./damo tune --probe_filter allow anon --probe_weight 100
$ sudo ./damo report access --dont_merge_regions
heatmap: 88888888888888888889888999999889999999000004888888888888889999988888898888888888
# min/max temperatures: -4,430,000,000, 0, column size: 99.800 MiB
intervals: sample 5 ms aggr 100 ms (max access hz 200)
# <start> <size> <freq> <age> <probe hits>
0 4.000 KiB 60.445 MiB 0 hz 700 ms 0
1 60.449 MiB 1.363 MiB 0 hz 600 ms 18
2 61.812 MiB 144.000 KiB 0 hz 0 ns 1
3 61.953 MiB 1.922 MiB 0 hz 2.400 s 19
4 63.875 MiB 12.133 MiB 0 hz 200 ms 0
[...]
500 5.132 GiB 8.000 KiB 0 hz 2 m 15.800 s 20
501 5.132 GiB 8.000 KiB 0 hz 2 m 16.200 s 0
502 5.132 GiB 16.000 KiB 0 hz 2 m 16.900 s 20
503 5.132 GiB 24.000 KiB 0 hz 2 m 14.200 s 0
504 5.132 GiB 8.000 KiB 0 hz 2 m 14.900 s 20
[...]
923 7.534 GiB 126.637 MiB 0 hz 0 ns 6
924 7.658 GiB 252.000 KiB 0 hz 54.800 s 20
925 7.658 GiB 142.242 MiB 0 hz 300 ms 0
memory bw estimate: 0 B per second
total size: 7.797 GiB
record DAMON intervals: sample 5 ms, aggr 100 msAs expected, regions are adjusted to provide the best accurate picture for the anonymous pages distribution (<probe hits>). The region 0 (60.445 MiB memory from the address 4.000 KiB) has nearly zero anonymous pages. The region 1 (1.363 MiB memory from the address 60.449 MiB) is nearly full with anonymous pages. Region 500 (8 KiB memory from the address 5.132 GiB) is certainly two anonymous pages.
Future Work
===========
Attributes only monitoring disables access monitoring. We will enable that in future, by extending the supported attributes to include data accesses. This patch series, and the future work are parts of the ongoing project [2] for extending DAMON. The project aims to extend DAMON with primitives other than page table accessed bits such as AMD IBS, Intel PEBS, and Arm SPE, to provide more powerful and detailed information like per-CPUs/threads/reads/writes monitoring.
Patches Sequence
================
Patch 1 introduces damon_probe->weight for specifying the weights of each attribute. Patches 2-6 extends apply_probe() damon_ops callback to efficiently support the new mode. Patch 7 extends regions merge function to work with probe hits in the mode. Patch 7 also introduces the function for detecting the mode enablement but always returns false, for safe and incremental changes. Patches 8-11 incrementally update kdamond_fn() to support the mode. Patch 12 completes the mode detection function implementation, so that the new mode really works. Patch 13 introduces a new sysfs file for ABI users. Finally, patches 14-16 respectively updates design, usage and ABI documents for the new feature and interfaces.
[1] https://github.com/damonitor/damo
[2] https://lore.kernel.org/[email protected]/
SJ Park (16):
mm/damon/core: introduce damon_probe->weight mm/damon/core: ask apply_probes() ops callback to set sampling address mm/damon/paddr: set samples in apply_probes() if requested mm/damon/core: ask apply_probe() to return max probe hits weighted sum mm/damon/core: implement damon_probe_hits_wsum() mm/damon/paddr: respect return_max_wsum
mm/damon/core: extend merge function to work with probe hits mm/damon/core: disable access monitoring when probe weights are set mm/damon/core: set samples in apply_probes() if probe weights are set mm/damon/core: s/max_nr_accesses/max_merge_score/ in kdamond_fn() mm/damon/core: get merge threshold from probe hits when weights are
set
mm/damon/core: implement damon_has_probe_weight() mm/damon/sysfs: implement probe/weight file Docs/mm/damon/design: document attrs-only monitoring Docs/admin-guide/mm/damon/usage: document weight sysfs file Docs/ABI/damon: document probe weight file
.../ABI/testing/sysfs-kernel-mm-damon | 6 + Documentation/admin-guide/mm/damon/usage.rst | 11 +- Documentation/mm/damon/design.rst | 25 ++++ include/linux/damon.h | 11 +- mm/damon/core.c | 107 +++++++++++++++--- mm/damon/paddr.c | 11 +- mm/damon/sysfs.c | 25 ++++ mm/damon/tests/core-kunit.h | 13 ++- 8 files changed, 184 insertions(+), 25 deletions(-)
base-commit: 3783e23372c397a29574c34283e1f07aa420db74
Signature · 1 line
2.47.3
SJ Park
maintainerRFC PATCH 1/16 mm/damon/core: introduce damon_probe->weight
Add a new field, weight to damon_probe struct. The field is used to specify the degree of the API caller's interest to the data attribute of the probe.
--- include/linux/damon.h | 1 + mm/damon/core.c | 3 +++ 2 files changed, 4 insertions(+)
include/linux/damon.h +1 -0
@@ -764,6 +764,7 @@ struct damon_filter {* @list: Siblings list. */ struct damon_probe { +unsigned int weight;struct list_head filters;struct list_head list; };
mm/damon/core.c +3 -0
@@ -166,6 +166,7 @@ struct damon_probe *damon_new_probe(void) p =kmalloc_obj (*p);if (!p)return NULL ; + p->weight =0 ;INIT_LIST_HEAD (&p->filters);INIT_LIST_HEAD (&p->list);return p;
@@ -1641,6 +1642,7 @@ static int damon_commit_probes(struct damon_ctx *dst, struct damon_ctx *src)damon_for_each_probe_safe (dst_probe, next, dst) { src_probe =damon_nth_probe (i++, src);if (src_probe) { + dst_probe->weight = src_probe->weight; err =damon_commit_filters (dst_probe, src_probe);if (err)return err;
@@ -1657,6 +1659,7 @@ static int damon_commit_probes(struct damon_ctx *dst, struct damon_ctx *src)if (!new_probe)return -ENOMEM ;damon_add_probe (dst, new_probe); + new_probe->weight = src_probe->weight; err =damon_commit_filters (new_probe, src_probe);if (err)return err;
Signature · 1 line
2.47.3
[email protected]
AI reviewRe: [RFC PATCH 01/16] mm/damon/core: introduce damon_probe->weight
Thank you for your contribution! Sashiko AI review found 1 potential issue(s) to consider: - [Low] Missing kernel-doc description for the new `weight` field in `struct damon_probe`. --
Thank you for your contribution! Sashiko AI review found 1 potential issue(s) to consider:
- [Low] Missing kernel-doc description for the new weight field in struct damon_probe. --
commit 4be82423c8a2e9beb3264e298ab3af6bd580eea9
Author: SJ Park <[email protected]>
mm/damon/core: introduce damon_probe->weight
This commit adds a new weight field to the damon_probe structure. The field is used to specify the degree of the API caller's interest in the data attribute of the probe.
include/linux/damon.h struct damon_filter { · line 766
Quoted 9 lines
include/linux/damon.h +1
-0@@ -763,6 +763,7 @@ struct damon_filter {* @list: Siblings list. */ struct damon_probe { +unsigned int weight;
[Severity: Low]
Should the kernel-doc comment block above struct damon_probe be updated to include a description for the new weight field? Without it, running scripts/kernel-doc might emit a warning about the undocumented field.
Quoted 3 lines
include/linux/damon.h +0
-0struct list_head filters;struct list_head list; };
Signature · 1 line
Sashiko AI review · https://sashiko.dev/#/patchset/[email protected]?part=1
SJ Park
maintainerRe: [RFC PATCH 01/16] mm/damon/core: introduce damon_probe->weight
Quoted 13 lines · On Sun, 05 Jul 2026 21:04:53 +0000 [email protected] wrote:
Thank you for your contribution! Sashiko AI review found 1 potential issue(s) to consider:
- [Low] Missing kernel-doc description for the newweightfield instruct damon_probe. --commit
4be82423c8a2e9beb3264e298ab3af6bd580eea9
Author: SJ Park <[email protected]>
mm/damon/core: introducedamon_probe->weightThis commit adds a new weight field to the
damon_probestructure. The field is used to specify the degree of the API caller's interest in the data attribute of the probe.
Quoted 14 lines
include/linux/damon.h struct damon_filter { · line 766
Quoted 9 lines
include/linux/damon.h +1
-0@@ -763,6 +763,7 @@ struct damon_filter {* @list: Siblings list. */ struct damon_probe { +unsigned int weight;[Severity: Low]
Should the kernel-doc comment block above structdamon_probebe updated to include a description for the new weight field? Without it, runningscripts/kernel-docmight emit a warning about the undocumented field.
Good catch. I will add the comment on the next revision.
Quoted 7 lines
Quoted 4 lines
include/linux/damon.h +0
-0struct list_head filters;struct list_head list; };Signature · 1 line
Sashiko AI review · https://sashiko.dev/#/patchset/[email protected]?part=1
Thanks,
SJ
SJ Park
maintainerRFC PATCH 2/16 mm/damon/core: ask apply_probes() ops callback to set sampling address
In reply to SJ Parkprepare_access_checks() DAMON ops callback sets the monitoring sampling address per region. In future, DAMON will be able to call only apply_probes(). In this case, applyy_probes() may need to do the sampling address setup, to minimize unnecessary regions iteration. Update the protocol for the request.
--- include/linux/damon.h | 5 +++-- mm/damon/core.c | 2 +- mm/damon/paddr.c | 2 +- 3 files changed, 5 insertions(+), 4 deletions(-)
include/linux/damon.h +3 -2
@@ -647,7 +647,8 @@ enum damon_ops_id {* It should also return max number of observed accesses that made as a result * of its update. The value will be used for regions adjustment threshold. * @apply_probes should apply the data attribute probes to each region and -* accordingly update the probe hits counter of the region. +* accordingly update the probe hits counter of the region. It should also +* &set sampling_addr or each region if &set_samples is true. * @get_scheme_score should return the priority score of a region for a scheme * as an integer in [0, &DAMOS_MAX_SCORE]. * @apply_scheme is called from @kdamond when a region for user provided
@@ -665,7 +666,7 @@ struct damon_operations {void (*update)(struct damon_ctx *context);void (*prepare_access_checks)(struct damon_ctx *context);unsigned int (*check_accesses)(struct damon_ctx *context); -void (*apply_probes)(struct damon_ctx *context); +void (*apply_probes)(struct damon_ctx *context,bool set_samples);int (*get_scheme_score)(struct damon_ctx *context,struct damon_region *r,struct damos *scheme); unsigned long (*apply_scheme)(struct damon_ctx *context,
mm/damon/core.c +1 -1
@@ -3675,7 +3675,7 @@ static int kdamond_fn(void *data)if (ctx->ops.check_accesses) max_nr_accesses = ctx->ops.check_accesses (ctx);if (ctx->ops.apply_probes) - ctx->ops.apply_probes (ctx); + ctx->ops.apply_probes (ctx, false);if (time_after_eq (ctx->passed_sample_intervals, next_aggregation_sis)) {
mm/damon/paddr.c +1 -1
@@ -166,7 +166,7 @@ static bool damon_pa_filter_pass(phys_addr_t pa, struct folio *folio,return pass; } -static void damon_pa_apply_probes (struct damon_ctx *ctx) +static void damon_pa_apply_probes (struct damon_ctx *ctx,bool set_samples) {struct damon_target *t;struct damon_region *r;
Signature · 1 line
2.47.3
[email protected]
AI reviewRe: [RFC PATCH 02/16] mm/damon/core: ask apply_probes() ops callback to set sampling address
Thank you for your contribution! Sashiko AI review found 1 potential issue(s) to consider: - [Low] Malformed kernel-doc syntax and typos in the `apply_probes` documentation. --
Thank you for your contribution! Sashiko AI review found 1 potential issue(s) to consider:
- [Low] Malformed kernel-doc syntax and typos in the apply_probes documentation. --
commit 2691e8480612ea2e98837a8db1eb30da170cf383
Author: SJ Park <[email protected]>
mm/damon/core: ask apply_probes() ops callback to set sampling address
This patch updates the apply_probes() callback in struct damon_operations by adding a set_samples argument. It allows apply_probes() to directly set the sampling address for each region, minimizing unnecessary iterations.
include/linux/damon.h enum damon_ops_id { · line 650
Quoted 11 lines
include/linux/damon.h +2
-1@@ -646,7 +646,8 @@ enum damon_ops_id {* It should also return max number of observed accesses that made as a result * of its update. The value will be used for regions adjustment threshold. * @apply_probes should apply the data attribute probes to each region and -* accordingly update the probe hits counter of the region. +* accordingly update the probe hits counter of the region. It should also +* &set sampling_addr or each region if &set_samples is true.
[Severity: Low]
This isn't a bug, but there appear to be a few typos and kernel-doc syntax issues in this documentation update.
Did you mean "for each" instead of "or each"?
Additionally, parameter references in kernel-doc typically use @set_samples rather than &set_samples, and the &set prefix seems unintended here.
[ ... ]
Signature · 1 line
Sashiko AI review · https://sashiko.dev/#/patchset/[email protected]?part=2
SJ Park
maintainerRe: [RFC PATCH 02/16] mm/damon/core: ask apply_probes() ops callback to set sampling address
Quoted 29 lines · On Sun, 05 Jul 2026 21:07:37 +0000 [email protected] wrote:
Thank you for your contribution! Sashiko AI review found 1 potential issue(s) to consider:
- [Low] Malformed kernel-doc syntax and typos in theapply_probesdocumentation. --commit
2691e8480612ea2e98837a8db1eb30da170cf383
Author: SJ Park <[email protected]>
mm/damon/core: askapply_probes()ops callback to set sampling addressThis patch updates the
apply_probes()callback in structdamon_operationsby adding aset_samplesargument. It allowsapply_probes()to directly set the sampling address for each region, minimizing unnecessary iterations.include/linux/damon.h enum damon_ops_id { · line 650
Quoted 11 lines
include/linux/damon.h +2
-1@@ -646,7 +646,8 @@ enum damon_ops_id {* It should also return max number of observed accesses that made as a result * of its update. The value will be used for regions adjustment threshold. * @apply_probes should apply the data attribute probes to each region and -* accordingly update the probe hits counter of the region. +* accordingly update the probe hits counter of the region. It should also +* &set sampling_addr or each region if &set_samples is true. [Severity: Low]
This isn't a bug, but there appear to be a few typos and kernel-doc syntax issues in this documentation update.
Quoted 4 lines
Did you mean "for each" instead of "or each"?
Additionally, parameter references in kernel-doc typically use @set_samples rather than
&set_samples, and the &set prefix seems unintended here.
Nice catches. I will fix those in the next revision.
Quoted 5 lines
[ ... ]
Signature · 1 line
Sashiko AI review · https://sashiko.dev/#/patchset/[email protected]?part=2
Thanks,
SJ
SJ Park
maintainerRFC PATCH 3/16 mm/damon/paddr: set samples in apply_probes() if requested
In reply to SJ Parkapply_probe() callback implementation in DAMON_PADDR is ignoring set_samples parameter. Respect it.
--- mm/damon/paddr.c | 4 ++++ 1 file changed, 4 insertions(+)
mm/damon/paddr.c +4 -0
@@ -178,6 +178,10 @@ static void damon_pa_apply_probes(struct damon_ctx *ctx, bool set_samples)phys_addr_t pa;struct folio *folio; +if (set_samples) + r->sampling_addr =damon_rand (ctx, r->ar.start, + r->ar.end); + pa =damon_pa_phys_addr (r->sampling_addr, ctx->addr_unit); folio =damon_get_folio (PHYS_PFN (pa));
Signature · 1 line
2.47.3
[email protected]
AI reviewRe: [RFC PATCH 03/16] mm/damon/paddr: set samples in apply_probes() if requested
Thank you for your contribution! Sashiko AI review found 1 potential issue(s) to consider:
Thank you for your contribution! Sashiko AI review found 1 potential issue(s) to consider:
Pre-existing issues:
- [High] The probe_hits counter in struct damon_region is an 8-bit integer (unsigned char), which overflows if the ratio of aggregation interval to sampling interval exceeds 255. When this wrapped value is used by damon_merge_score() (introduced in this series via damon_probe_hits_wsum()), DAMON incorrectly merges regions, breaking its core tracking logic. --
commit 26a2b31429c08214403a84c01f1b8d381e461d92
Author: SJ Park <[email protected]>
mm/damon/paddr: set samples in apply_probes() if requested
The apply_probe() callback implementation in DAMON_PADDR ignores the set_samples parameter. This commit updates it to respect the parameter by setting the sampling address if requested.
Quoted 5 lines
mm/damon/paddr.c +0
-0
mm/damon/paddr.c static void damon_pa_apply_probes(struct damon_ctx *ctx, bool set_samples) · line 187
Quoted 10 lines
mm/damon/paddr.c +4
-0@@ -178,6 +178,10 @@ static void damon_pa_apply_probes(struct damon_ctx *ctx, bool set_samples)phys_addr_t pa;struct folio *folio; +if (set_samples) + r->sampling_addr =damon_rand (ctx, r->ar.start, + r->ar.end); + pa =damon_pa_phys_addr (r->sampling_addr, ctx->addr_unit); folio =damon_get_folio (PHYS_PFN (pa));
[Severity: High]
This is a pre-existing issue, but does this code overflow probe_hits[]?
Looking at include/linux/damon.h, probe_hits is defined as an 8-bit integer:
struct damon_region {
...
unsigned char probe_hits[DAMON_MAX_PROBES];Shortly after the sampling address is set in damon_pa_apply_probes(), this counter is incremented:
damon_for_each_probe(p, ctx) {
if (damon_pa_filter_pass(pa, folio, p))
r->probe_hits[i]++;If a user configures DAMON such that the ratio of aggregation interval to sampling interval exceeds 255, this counter will overflow and wrap around to zero.
Since this patch series modifies damon_merge_score() in mm/damon/core.c to rely on this counter:
if (use_probe_hits)
return damon_probe_hits_wsum(r, last, ctx);Could this overflow cause highly-accessed regions to be treated as having few matches, leading to incorrect region merging and breaking DAMON's core tracking logic for filters?
Signature · 1 line
Sashiko AI review · https://sashiko.dev/#/patchset/[email protected]?part=3
SJ Park
maintainerRe: [RFC PATCH 03/16] mm/damon/paddr: set samples in apply_probes() if requested
Quoted 54 lines · On Sun, 05 Jul 2026 21:11:47 +0000 [email protected] wrote:
Thank you for your contribution! Sashiko AI review found 1 potential issue(s) to consider:
Pre-existing issues:
- [High] Theprobe_hitscounter instruct damon_regionis an 8-bit integer (unsigned char), which overflows if the ratio of aggregation interval to sampling interval exceeds 255. When this wrapped value is used bydamon_merge_score()(introduced in this series viadamon_probe_hits_wsum()), DAMON incorrectly merges regions, breaking its core tracking logic. --commit
26a2b31429c08214403a84c01f1b8d381e461d92
Author: SJ Park <[email protected]>
mm/damon/paddr: set samples inapply_probes()if requestedThe
apply_probe()callback implementation inDAMON_PADDRignores theset_samplesparameter. This commit updates it to respect the parameter by setting the sampling address if requested.Quoted 5 lines
mm/damon/paddr.c +0
-0mm/damon/paddr.c static void damon_pa_apply_probes(struct damon_ctx *ctx, bool set_samples) · line 187
Quoted 10 lines
mm/damon/paddr.c +4
-0@@ -178,6 +178,10 @@ static void damon_pa_apply_probes(struct damon_ctx *ctx, bool set_samples)phys_addr_t pa;struct folio *folio; +if (set_samples) + r->sampling_addr =damon_rand (ctx, r->ar.start, + r->ar.end); + pa =damon_pa_phys_addr (r->sampling_addr, ctx->addr_unit); folio =damon_get_folio (PHYS_PFN (pa));[Severity: High]
This is a pre-existing issue, but does this code overflow probe_hits[]?Looking at
include/linux/damon.h,probe_hitsis defined as an 8-bit integer:struct damon_region { ... unsigned char probe_hits[DAMON_MAX_PROBES];Shortly after the sampling address is set in
damon_pa_apply_probes(), this counter is incremented:damon_for_each_probe(p, ctx) { if (damon_pa_filter_pass(pa, folio, p)) r->probe_hits[i]++;If a user configures DAMON such that the ratio of aggregation interval to sampling interval exceeds 255, this counter will overflow and wrap around to zero.
Since this patch series modifies
damon_merge_score()inmm/damon/core.cto rely on this counter:
Quoted 6 lines
if (use_probe_hits) return damon_probe_hits_wsum(r, last, ctx);Could this overflow cause highly-accessed regions to be treated as having few matches, leading to incorrect region merging and breaking DAMON's core tracking logic for filters?
It can overflow, and it is the intended behavior.
Since the core layer parameters validation series is just merged into mm-new, I'm considering limiting aggregation interval to be less than 256 * sampling interval using the validation mechanism, though.
Quoted 3 lines
Signature · 2 lines
-- Sashiko AI review · https://sashiko.dev/#/patchset/[email protected]?part=3
Thanks,
SJ
SJ Park
maintainerRFC PATCH 4/16 mm/damon/core: ask apply_probe() to return max probe hits weighted sum
In reply to SJ Parkcheck_accesses() DAMON ops callback returns the maximum nr_accesses of regions. DAMON core uses it to calculate a reasonable region merge threshold. The core will need to adjust regions for not nr_accesses but probe hits weighted sum in future. For that, the core needs to know the maximum weighted sum of the regions. Update the protocol for the task.
--- include/linux/damon.h | 7 +++++-- mm/damon/core.c | 2 +- mm/damon/paddr.c | 4 +++- 3 files changed, 9 insertions(+), 4 deletions(-)
include/linux/damon.h +5 -2
@@ -648,7 +648,9 @@ enum damon_ops_id {* of its update. The value will be used for regions adjustment threshold. * @apply_probes should apply the data attribute probes to each region and * accordingly update the probe hits counter of the region. It should also -* &set sampling_addr or each region if &set_samples is true. +* &set sampling_addr or each region if &set_samples is true. It should also +* return maximum probe hits weighted sum of regions if &return_max_wsum is +* true. * @get_scheme_score should return the priority score of a region for a scheme * as an integer in [0, &DAMOS_MAX_SCORE]. * @apply_scheme is called from @kdamond when a region for user provided
@@ -666,7 +668,8 @@ struct damon_operations {void (*update)(struct damon_ctx *context);void (*prepare_access_checks)(struct damon_ctx *context);unsigned int (*check_accesses)(struct damon_ctx *context); -void (*apply_probes)(struct damon_ctx *context,bool set_samples); +unsigned int (*apply_probes)(struct damon_ctx *context, +bool set_samples,bool return_max_wsum);int (*get_scheme_score)(struct damon_ctx *context,struct damon_region *r,struct damos *scheme); unsigned long (*apply_scheme)(struct damon_ctx *context,
mm/damon/core.c +1 -1
@@ -3675,7 +3675,7 @@ static int kdamond_fn(void *data)if (ctx->ops.check_accesses) max_nr_accesses = ctx->ops.check_accesses (ctx);if (ctx->ops.apply_probes) - ctx->ops.apply_probes (ctx, false); + ctx->ops.apply_probes (ctx, false, false);if (time_after_eq (ctx->passed_sample_intervals, next_aggregation_sis)) {
mm/damon/paddr.c +3 -1
@@ -166,7 +166,8 @@ static bool damon_pa_filter_pass(phys_addr_t pa, struct folio *folio,return pass; } -static void damon_pa_apply_probes (struct damon_ctx *ctx,bool set_samples) +static unsigned int damon_pa_apply_probes (struct damon_ctx *ctx, +bool set_samples,bool return_max_wsum) {struct damon_target *t;struct damon_region *r;
@@ -194,6 +195,7 @@ static void damon_pa_apply_probes(struct damon_ctx *ctx, bool set_samples)folio_put (folio); } } +return 0 ; }/*
Signature · 1 line
2.47.3
SJ Park
maintainerRFC PATCH 5/16 mm/damon/core: implement damon_probe_hits_wsum()
In reply to SJ ParkWhen damon_probe->weight is set, the weighted sum of probe hits will be useful. It will be useful for not only the users but also DAMON internal logics like regions merging. Implement a function for calculating it.
--- include/linux/damon.h | 2 ++ mm/damon/core.c | 24 ++++++++++++++++++++++++ 2 files changed, 26 insertions(+)
include/linux/damon.h +2 -0
@@ -1011,6 +1011,8 @@ unsigned int damon_nr_accesses_mvsum(struct damon_region *r, struct damon_ctx *ctx);unsigned char damon_probe_hits_mvsum (int probe_idx,struct damon_region *r,struct damon_ctx *ctx); +unsigned int damon_probe_hits_wsum (struct damon_region *r,bool last, +struct damon_ctx *ctx);int damon_set_regions (struct damon_target *t,struct damon_addr_range *ranges,unsigned int nr_ranges,unsigned long min_region_sz);
mm/damon/core.c +24 -0
@@ -390,6 +390,30 @@ static bool damon_is_last_region(struct damon_region *r,return list_is_last (&r->list, &t->regions_list); } +/** +* damon_probe_hits_wsum() - Returns probe hits weighted sum of a region. +* @r: region to get the weigted sum of. +* @last: if the request is for last-window agggregated probe hits. +* @ctx: context of &r. +* +* Return: the weighted sum of probe hits of the region. +*/ +unsigned int damon_probe_hits_wsum (struct damon_region *r,bool last, +struct damon_ctx *ctx) +{ +struct damon_probe *probe; +unsigned int sum =0 ; +int i =0 ; + +damon_for_each_probe (probe, ctx) { +if (last) + sum += r->last_probe_hits[i++] * probe->weight; +else + sum += r->probe_hits[i++] * probe->weight; + } +return sum; +} +/* * Check whether a region is intersecting an address range *
Signature · 1 line
2.47.3
[email protected]
AI reviewRe: [RFC PATCH 05/16] mm/damon/core: implement damon_probe_hits_wsum()
Thank you for your contribution! Sashiko AI review found 1 potential issue(s) to consider: - [Medium] The calculation of the weighted sum in `damon_probe_hits_wsum()` can overflow the 32-bit…
Thank you for your contribution! Sashiko AI review found 1 potential issue(s) to consider:
- [Medium] The calculation of the weighted sum in damon_probe_hits_wsum() can overflow the 32-bit unsigned int datatype. --
commit fa25d0914791f2e39d32d91b9baaf69eaeb0a208
Author: SJ Park <[email protected]>
mm/damon/core: implement damon_probe_hits_wsum()
This commit introduces a new function damon_probe_hits_wsum() to calculate the weighted sum of probe hits for a given region. This weighted sum is intended to be used by both users and internal DAMON logic like region merging.
Quoted 4 lines
mm/damon/core.c +0
-0
[ ... ]
Quoted 14 lines
mm/damon/core.c +10
-0@@ -390,6 +390,30 @@ static bool damon_is_last_region(struct damon_region *r,return list_is_last (&r->list, &t->regions_list); } +/** +* damon_probe_hits_wsum() - Returns probe hits weighted sum of a region. +* @r: region to get the weigted sum of. +* @last: if the request is for last-window agggregated probe hits. +* @ctx: context of &r. +* +* Return: the weighted sum of probe hits of the region. +*/ +unsigned int damon_probe_hits_wsum (struct damon_region *r,bool last, +struct damon_ctx *ctx)
mm/damon/core.c static bool damon_is_last_region(struct damon_region *r, · line 412
Quoted 10 lines
mm/damon/core.c +10
-0+{ +struct damon_probe *probe; +unsigned int sum =0 ; +int i =0 ; + +damon_for_each_probe (probe, ctx) { +if (last) + sum += r->last_probe_hits[i++] * probe->weight; +else + sum += r->probe_hits[i++] * probe->weight;
[Severity: Medium]
Can this calculation overflow the 32-bit unsigned integer?
Since sum and probe->weight are both typed as unsigned int, if a sufficiently large probe weight (for example, larger than 16,843,000) is configured via sysfs, this multiplication and accumulation might wrap around.
If the score wraps around to an artificially low value, would this cause DAMON's region merging logic to behave incorrectly due to unexpected thresholds?
Quoted 7 lines
mm/damon/core.c +4
-0+ } +return sum; +} +/* * Check whether a region is intersecting an address range *
Signature · 1 line
Sashiko AI review · https://sashiko.dev/#/patchset/[email protected]?part=5
SJ Park
maintainerRe: [RFC PATCH 05/16] mm/damon/core: implement damon_probe_hits_wsum()
Quoted 47 lines · On Sun, 05 Jul 2026 21:13:50 +0000 [email protected] wrote:
Thank you for your contribution! Sashiko AI review found 1 potential issue(s) to consider:
- [Medium] The calculation of the weighted sum indamon_probe_hits_wsum()can overflow the 32-bitunsigned intdatatype. --commit
fa25d0914791f2e39d32d91b9baaf69eaeb0a208
Author: SJ Park <[email protected]>
mm/damon/core: implementdamon_probe_hits_wsum()This commit introduces a new function
damon_probe_hits_wsum()to calculate the weighted sum of probe hits for a given region. This weighted sum is intended to be used by both users and internal DAMON logic like region merging.Quoted 4 lines
mm/damon/core.c +0
-0[ ... ]
Quoted 14 lines
mm/damon/core.c +10
-0@@ -390,6 +390,30 @@ static bool damon_is_last_region(struct damon_region *r,return list_is_last (&r->list, &t->regions_list); } +/** +* damon_probe_hits_wsum() - Returns probe hits weighted sum of a region. +* @r: region to get the weigted sum of. +* @last: if the request is for last-window agggregated probe hits. +* @ctx: context of &r. +* +* Return: the weighted sum of probe hits of the region. +*/ +unsigned int damon_probe_hits_wsum (struct damon_region *r,bool last, +struct damon_ctx *ctx)mm/damon/core.c static bool damon_is_last_region(struct damon_region *r, · line 412
Quoted 10 lines
mm/damon/core.c +10
-0+{ +struct damon_probe *probe; +unsigned int sum =0 ; +int i =0 ; + +damon_for_each_probe (probe, ctx) { +if (last) + sum += r->last_probe_hits[i++] * probe->weight; +else + sum += r->probe_hits[i++] * probe->weight;[Severity: Medium]
Can this calculation overflow the 32-bit unsigned integer?
Quoted 7 lines
Since sum and
probe->weightare both typed as unsigned int, if a sufficiently large probe weight (for example, larger than 16,843,000) is configured via sysfs, this multiplication and accumulation might wrap around.If the score wraps around to an artificially low value, would this cause DAMON's region merging logic to behave incorrectly due to unexpected thresholds?
It can overflow. It doesn't make any critical cosnequences like kernel crash, though. Known low priority issue.
I'm considering avoiding this by adding the validation in the core layer parameters validation, which is merged into mm-new today.
Thanks,
SJ
[...]
SJ Park
maintainerRFC PATCH 6/16 mm/damon/paddr: respect return_max_wsum
In reply to SJ Parkapply_probes() ops implementation in DAMON_PADDR is ignoring return_max_wsum. Respect it.
--- mm/damon/paddr.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-)
mm/damon/paddr.c +5 -2
@@ -172,6 +172,7 @@ static unsigned int damon_pa_apply_probes(struct damon_ctx *ctx,struct damon_target *t;struct damon_region *r;struct damon_probe *p; +unsigned int max_wsum =0 ;damon_for_each_target (t, ctx) {damon_for_each_region (r, t) {
@@ -182,7 +183,6 @@ static unsigned int damon_pa_apply_probes(struct damon_ctx *ctx,if (set_samples) r->sampling_addr =damon_rand (ctx, r->ar.start, r->ar.end); - pa =damon_pa_phys_addr (r->sampling_addr, ctx->addr_unit); folio =damon_get_folio (PHYS_PFN (pa));
@@ -193,9 +193,12 @@ static unsigned int damon_pa_apply_probes(struct damon_ctx *ctx, }if (folio)folio_put (folio); +if (return_max_wsum) + max_wsum =max (damon_probe_hits_wsum (r, false, + ctx), max_wsum); } } -return 0 ; +return max_wsum; }/*
Signature · 1 line
2.47.3
SJ Park
maintainerRFC PATCH 7/16 mm/damon/core: extend merge function to work with probe hits
In reply to SJ ParkWhen probe weights are set, users may want DAMON monitoring results to be optimized for the weights. For that, regions adjustment should work for the weighted sum of probe hits. Extend damon_merge_regions_of() to detect if the weights are set, and work with probe hits in the case.
The weights setup detection function is incomplete. It always returns false. It is intentional, so that more changes to completely support weights can be made in an incremental but safe way. Until the function is completed, all changes depend on it is no-op, so DAMON works in the current mode.
--- mm/damon/core.c | 48 +++++++++++++++++++++++++++++-------- mm/damon/tests/core-kunit.h | 13 ++++++++-- 2 files changed, 49 insertions(+), 12 deletions(-)
mm/damon/core.c +38 -10
@@ -209,6 +209,11 @@ static struct damon_probe *damon_nth_probe(int n, struct damon_ctx *ctx)return NULL ; } +static bool damon_has_probe_weights (struct damon_ctx *c) +{ +return false; +} +/* * damon_mvsum() - Returns pseudo moving sum value for a time window. * @current_nr: The value of the current aggregation window.
@@ -3231,6 +3236,16 @@ static void damon_merge_two_regions(struct damon_target *t,damon_destroy_region (r, t); } +static unsigned int damon_merge_score (struct damon_region *r,bool last, +struct damon_ctx *ctx,bool use_probe_hits) +{ +if (use_probe_hits) +return damon_probe_hits_wsum (r, last, ctx); +if (last) +return r->last_nr_accesses; +return r->nr_accesses; +} +/* * Merge adjacent regions having similar access frequencies *
@@ -3239,24 +3254,37 @@ static void damon_merge_two_regions(struct damon_target *t,* sz_limit size upper limit of each region */ static void damon_merge_regions_of (struct damon_target *t,unsigned int thres, -unsigned long sz_limit) +unsigned long sz_limit,struct damon_ctx *ctx) {struct damon_region *r, *prev =NULL , *next; +bool use_probe_hits =damon_has_probe_weights (ctx);damon_for_each_region_safe (r, next, t) { -if (abs (r->nr_accesses - r->last_nr_accesses) > thres) +unsigned int score, last_score; + + score =damon_merge_score (r, false, ctx, use_probe_hits); + last_score =damon_merge_score (r, true, ctx, use_probe_hits); + +if (abs (score - last_score) > thres) r->age =0 ; -else if ((r->nr_accesses ==0 ) != (r->last_nr_accesses ==0 )) +else if ((score ==0 ) != (last_score ==0 )) r->age =0 ;else r->age++; -if (prev && prev->ar.end == r->ar.start && -abs (prev->nr_accesses - r->nr_accesses) <= thres && -damon_sz_region (prev) +damon_sz_region (r) <= sz_limit) -damon_merge_two_regions (t, prev, r); -else - prev = r; +if (!prev) + goto set_prev_continue; +if (prev->ar.end != r->ar.start) + goto set_prev_continue; +if (abs (damon_merge_score (prev, false, ctx, use_probe_hits) - + score) > thres) + goto set_prev_continue; +if (damon_sz_region (prev) +damon_sz_region (r) > sz_limit) + goto set_prev_continue; +damon_merge_two_regions (t, prev, r); +continue ; +set_prev_continue: + prev = r; } }
@@ -3289,7 +3317,7 @@ static void kdamond_merge_regions(struct damon_ctx *c, unsigned int threshold, do { nr_regions = 0; damon_for_each_target(t, c) { - damon_merge_regions_of(t, threshold, sz_limit); + damon_merge_regions_of(t, threshold, sz_limit, c); nr_regions += damon_nr_regions(t); } threshold = max(1, threshold * 2);
mm/damon/tests/core-kunit.h +11 -2
@@ -226,6 +226,7 @@ static struct damon_region *__nth_region_of(struct damon_target *t, int idx)static void damon_test_merge_regions_of (struct kunit *test) { +struct damon_ctx *ctx;struct damon_target *t;struct damon_region *r;unsigned long sa[] = {0 ,100 ,114 ,122 ,130 ,156 ,170 ,184 ,230 };
@@ -236,20 +237,27 @@ static void damon_test_merge_regions_of(struct kunit *test)unsigned long eaddrs[] = {112 ,130 ,156 ,170 ,230 ,10170 };int i; + ctx =damon_new_ctx (); +if (!ctx) +kunit_skip (test,"ctx alloc fail" ); + t =damon_new_target (); -if (!t) +if (!t) { +damon_destroy_ctx (ctx);kunit_skip (test,"target alloc fail" ); + }for (i =0 ; i <ARRAY_SIZE (sa); i++) { r =damon_new_region (sa[i], ea[i]);if (!r) {damon_free_target (t); +damon_destroy_ctx (ctx);kunit_skip (test,"region alloc fail" ); } r->nr_accesses = nrs[i];damon_add_region (r, t); } -damon_merge_regions_of (t,9 ,9999 ); +damon_merge_regions_of (t,9 ,9999 , ctx);/* 0-112, 114-130, 130-156, 156-170, 170-230, 230-10170 */ KUNIT_EXPECT_EQ (test,damon_nr_regions (t),6u );for (i =0 ; i <6 ; i++) {
@@ -258,6 +266,7 @@ static void damon_test_merge_regions_of(struct kunit *test)KUNIT_EXPECT_EQ (test, r->ar.end, eaddrs[i]); }damon_free_target (t); +damon_destroy_ctx (ctx); }static void damon_test_split_regions_of (struct kunit *test)
Signature · 1 line
2.47.3
[email protected]
AI reviewRe: [RFC PATCH 07/16] mm/damon/core: extend merge function to work with probe hits
Thank you for your contribution! Sashiko AI review found 4 potential issue(s) to consider:
Thank you for your contribution! Sashiko AI review found 4 potential issue(s) to consider:
New issues:
- [High] Incompatible scale and domain mismatch between weighted scores and unweighted merge thresholds.
- [High] Unsafe use of abs() macro on large unsigned integer score differences causes silent signed integer overflow.
- [Medium] Calculating the weighted sum of probe hits in damon_probe_hits_wsum can easily overflow a 32-bit unsigned int.
Pre-existing issues:
- [High] Weighted average calculations in damon_merge_two_regions silently overflow 32-bit unsigned long on 32-bit architectures. --
commit 54d6e0bb9900e63a1a016ffee9632b6aa602175b
Author: SJ Park <[email protected]>
mm/damon/core: extend merge function to work with probe hits
This commit extends damon_merge_regions_of() to consider the weighted sum of probe hits when calculating regions to merge, introducing damon_has_probe_weights() and modifying the scoring logic to use these weights.
Quoted 4 lines
mm/damon/core.c +0
-0
[ ... ]
mm/damon/core.c static void damon_merge_two_regions(struct damon_target *t, · line 3193
Quoted 3 lines
mm/damon/core.c +0
-0@@ -3187,6 +3192,16 @@ static void damon_merge_two_regions(struct damon_target *t,damon_destroy_region (r, t); }
[Severity: High]
This isn't a bug introduced by this patch, but can the weighted average calculations in damon_merge_two_regions() silently overflow a 32-bit unsigned long on 32-bit architectures?
On 32-bit architectures, sz_l is a 32-bit unsigned long.
If the region size is large (e.g., hundreds of megabytes), multiplying sz_l by nr_accesses or probe_hits could exceed the 4.29B maximum of a 32-bit integer, corrupting the merged region's statistics.
mm/damon/core.c:damon_merge_two_regions() {
...
l->nr_accesses = (l->nr_accesses * sz_l + r->nr_accesses * sz_r) / (sz_l + sz_r); ... for (i = 0; i < DAMON_MAX_PROBES; i++) l->probe_hits[i] = (l->probe_hits[i] * sz_l + r->probe_hits[i] * sz_r) / (sz_l + sz_r);
...
}
mm/damon/core.c static void damon_merge_two_regions(struct damon_target *t, · line 3243
Quoted 5 lines
mm/damon/core.c +5
-0+static unsigned int damon_merge_score (struct damon_region *r,bool last, +struct damon_ctx *ctx,bool use_probe_hits) +{ +if (use_probe_hits) +return damon_probe_hits_wsum (r, last, ctx);
[Severity: Medium]
Can the multiplication in damon_probe_hits_wsum() overflow a 32-bit unsigned int?
probe->weight is an unsigned int.
If users supply a large weight, multiplying it by r->probe_hits[i] (which can be up to 255) might exceed UINT_MAX, causing the sum to wrap around and yield artificially small scores for highly active regions.
mm/damon/core.c:damon_probe_hits_wsum() {
...
if (last) sum += r->last_probe_hits[i++] * probe->weight; else sum += r->probe_hits[i++] * probe->weight;
...
}
Quoted 16 lines
mm/damon/core.c +6
-1+if (last) +return r->last_nr_accesses; +return r->nr_accesses; +} +/* * Merge adjacent regions having similar access frequencies * @@ -3195,24 +3210,37 @@ static void damon_merge_two_regions(struct damon_target *t,* sz_limit size upper limit of each region */ static void damon_merge_regions_of (struct damon_target *t,unsigned int thres, -unsigned long sz_limit) +unsigned long sz_limit,struct damon_ctx *ctx) {struct damon_region *r, *prev =NULL , *next;
mm/damon/core.c static void damon_merge_two_regions(struct damon_target *t, · line 3224
Quoted 10 lines
mm/damon/core.c +7
-1+bool use_probe_hits =damon_has_probe_weights (ctx);damon_for_each_region_safe (r, next, t) { -if (abs (r->nr_accesses - r->last_nr_accesses) > thres) +unsigned int score, last_score; + + score =damon_merge_score (r, false, ctx, use_probe_hits); + last_score =damon_merge_score (r, true, ctx, use_probe_hits); + +if (abs (score - last_score) > thres)
[Severity: High]
Does the use of abs() here cause a silent signed integer overflow for large unsigned differences?
The macro abs() implicitly casts an unsigned int to a signed int.
If the mathematical difference between score and last_score exceeds INT_MAX (which might happen with large user-defined probe weights), the cast wraps to a negative number.
The abs() macro then negates it into an artificially small positive integer, which could cause the code to incorrectly bypass the > thres check and merge regions with vastly different access profiles.
[Severity: High]
Is there a domain mismatch between the weighted score differences and the unweighted thres parameter?
When use_probe_hits is true, the score is a weighted sum derived from probe hits and user-defined weights. However, thres operates in the unweighted access frequency domain.
This mismatch appears to carry over to kdamond_merge_regions(), where max_thres is also scaled in the unweighted domain (aggr_interval / sample_interval).
Because weighted scores operate in a different numerical domain, could they easily exceed max_thres, forcing the merge loop in kdamond_merge_regions() to terminate prematurely?
mm/damon/core.c:kdamond_merge_regions() {
...
max_thres = c->attrs.aggr_interval /
(c->attrs.sample_interval ? c->attrs.sample_interval : 1);
do {
...
threshold = max(1, threshold * 2);
} while (nr_regions > c->attrs.max_nr_regions &&
threshold / 2 < max_thres);...
}
Quoted 9 lines
mm/damon/core.c +1
-3r->age =0 ; - else if ((r->nr_accesses == 0) != (r->last_nr_accesses == 0)) + else if ((score == 0) != (last_score == 0)) r->age = 0; else r->age++; - if (prev && prev->ar.end == r->ar.start && - abs(prev->nr_accesses - r->nr_accesses) <= thres &&
mm/damon/core.c static void damon_merge_two_regions(struct damon_target *t, · line 3280
Quoted 10 lines
mm/damon/core.c +6
-4- damon_sz_region(prev) + damon_sz_region(r) <= sz_limit) -damon_merge_two_regions (t, prev, r); - else - prev = r; +if (!prev) + goto set_prev_continue; +if (prev->ar.end != r->ar.start) + goto set_prev_continue; +if (abs (damon_merge_score (prev, false, ctx, use_probe_hits) - + score) > thres)
[Severity: High]
Does this abs() usage also suffer from the same silent signed integer overflow as mentioned above when comparing large unsigned score differences?
Quoted 9 lines
mm/damon/core.c +7
-0+ goto set_prev_continue; +if (damon_sz_region (prev) +damon_sz_region (r) > sz_limit) + goto set_prev_continue; +damon_merge_two_regions (t, prev, r); +continue ; +set_prev_continue: + prev = r; } }
Signature · 1 line
Sashiko AI review · https://sashiko.dev/#/patchset/[email protected]?part=7
SJ Park
maintainerRe: [RFC PATCH 07/16] mm/damon/core: extend merge function to work with probe hits
Quoted 42 lines · On Sun, 05 Jul 2026 21:11:01 +0000 [email protected] wrote:
Thank you for your contribution! Sashiko AI review found 4 potential issue(s) to consider:
New issues:
- [High] Incompatible scale and domain mismatch between weighted scores and unweighted merge thresholds.
- [High] Unsafe use ofabs()macro on large unsigned integer score differences causes silent signed integer overflow.
- [Medium] Calculating the weighted sum of probe hits indamon_probe_hits_wsumcan easily overflow a 32-bitunsigned int.Pre-existing issues:
- [High] Weighted average calculations indamon_merge_two_regionssilently overflow 32-bitunsigned longon 32-bit architectures. --commit
54d6e0bb9900e63a1a016ffee9632b6aa602175b
Author: SJ Park <[email protected]>
mm/damon/core: extend merge function to work with probe hitsThis commit extends
damon_merge_regions_of()to consider the weighted sum of probe hits when calculating regions to merge, introducingdamon_has_probe_weights()and modifying the scoring logic to use these weights.Quoted 4 lines
mm/damon/core.c +0
-0[ ... ]
mm/damon/core.c static void damon_merge_two_regions(struct damon_target *t, · line 3193
Quoted 3 lines
mm/damon/core.c +0
-0@@ -3187,6 +3192,16 @@ static void damon_merge_two_regions(struct damon_target *t,damon_destroy_region (r, t); }[Severity: High]
This isn't a bug introduced by this patch, but can the weighted average calculations indamon_merge_two_regions()silently overflow a 32-bit unsigned long on 32-bit architectures?On 32-bit architectures,
sz_lis a 32-bit unsigned long.If the region size is large (e.g., hundreds of megabytes), multiplying
sz_lbynr_accessesorprobe_hitscould exceed the 4.29B maximum of a 32-bit integer, corrupting the merged region's statistics.mm/damon/core.c:damon_merge_two_regions() {
...
Quoted 8 lines
l->nr_accesses = (l->nr_accesses * sz_l + r->nr_accesses * sz_r) / (sz_l + sz_r); ... for (i = 0; i < DAMON_MAX_PROBES; i++) l->probe_hits[i] = (l->probe_hits[i] * sz_l + r->probe_hits[i] * sz_r) / (sz_l + sz_r);...
}
This doesn't cause a critical consequenes like kernel crash. Knnown low priority issue.
Quoted 17 lines
mm/damon/core.c static void damon_merge_two_regions(struct damon_target *t, · line 3243
Quoted 6 lines
mm/damon/core.c +5
-0+static unsigned int damon_merge_score (struct damon_region *r,bool last, +struct damon_ctx *ctx,bool use_probe_hits) +{ +if (use_probe_hits) +return damon_probe_hits_wsum (r, last, ctx);[Severity: Medium]
Can the multiplication indamon_probe_hits_wsum()overflow a 32-bit unsigned int?
probe->weightis an unsigned int.If users supply a large weight, multiplying it by r->probe_hits[i] (which can be up to 255) might exceed
UINT_MAX, causing the sum to wrap around and yield artificially small scores for highly active regions.
Quoted 8 lines
mm/damon/core.c:damon_probe_hits_wsum() {
...if (last) sum += r->last_probe_hits[i++] * probe->weight; else sum += r->probe_hits[i++] * probe->weight;...
}
No critical consequence like kernel crash. Known low priority issue.
Quoted 34 lines
Quoted 17 lines
mm/damon/core.c +6
-1+if (last) +return r->last_nr_accesses; +return r->nr_accesses; +} +/* * Merge adjacent regions having similar access frequencies * @@ -3195,24 +3210,37 @@ static void damon_merge_two_regions(struct damon_target *t,* sz_limit size upper limit of each region */ static void damon_merge_regions_of (struct damon_target *t,unsigned int thres, -unsigned long sz_limit) +unsigned long sz_limit,struct damon_ctx *ctx) {struct damon_region *r, *prev =NULL , *next;mm/damon/core.c static void damon_merge_two_regions(struct damon_target *t, · line 3224
Quoted 10 lines
mm/damon/core.c +7
-1+bool use_probe_hits =damon_has_probe_weights (ctx);damon_for_each_region_safe (r, next, t) { -if (abs (r->nr_accesses - r->last_nr_accesses) > thres) +unsigned int score, last_score; + + score =damon_merge_score (r, false, ctx, use_probe_hits); + last_score =damon_merge_score (r, true, ctx, use_probe_hits); + +if (abs (score - last_score) > thres)[Severity: High]
Does the use ofabs()here cause a silent signed integer overflow for large unsigned differences?The macro
abs()implicitly casts an unsigned int to a signed int.
Quoted 7 lines
If the mathematical difference between score and
last_scoreexceedsINT_MAX(which might happen with large user-defined probe weights), the cast wraps to a negative number.The
abs()macro then negates it into an artificially small positive integer, which could cause the code to incorrectly bypass the > thres check and merge regions with vastly different access profiles.
Pre-existing issue. I will fix this separately.
Quoted 25 lines
[Severity: High]
Is there a domain mismatch between the weighted score differences and the unweighted thres parameter?When
use_probe_hitsis true, the score is a weighted sum derived from probe hits and user-defined weights. However, thres operates in the unweighted access frequency domain.This mismatch appears to carry over to
kdamond_merge_regions(), wheremax_thresis also scaled in the unweighted domain (aggr_interval/sample_interval).Because weighted scores operate in a different numerical domain, could they easily exceed
max_thres, forcing the merge loop inkdamond_merge_regions()to terminate prematurely?mm/damon/core.c:kdamond_merge_regions() {
...max_thres = c->attrs.aggr_interval / (c->attrs.sample_interval ? c->attrs.sample_interval : 1); do { ... threshold = max(1, threshold * 2); } while (nr_regions > c->attrs.max_nr_regions && threshold / 2 < max_thres);
Quoted 2 lines
...
}
Yes, and that will be fixed by the later commit of this series.
Quoted 8 lines
Quoted 8 lines
mm/damon/core.c +1
-1r->age =0 ; - else if ((r->nr_accesses == 0) != (r->last_nr_accesses == 0)) + else if ((score == 0) != (last_score == 0)) r->age = 0; else r->age++;
Quoted 16 lines
mm/damon/core.c static void damon_merge_two_regions(struct damon_target *t, · line 3280
Quoted 12 lines
mm/damon/core.c +6
-6-if (prev && prev->ar.end == r->ar.start && -abs (prev->nr_accesses - r->nr_accesses) <= thres && -damon_sz_region (prev) +damon_sz_region (r) <= sz_limit) -damon_merge_two_regions (t, prev, r); -else - prev = r; +if (!prev) + goto set_prev_continue; +if (prev->ar.end != r->ar.start) + goto set_prev_continue; +if (abs (damon_merge_score (prev, false, ctx, use_probe_hits) - + score) > thres)[Severity: High]
Does thisabs()usage also suffer from the same silent signed integer overflow as mentioned above when comparing large unsigned score differences?
Pre-existing issue. I will separately work on this.
Quoted 13 lines
Quoted 10 lines
mm/damon/core.c +7
-0+ goto set_prev_continue; +if (damon_sz_region (prev) +damon_sz_region (r) > sz_limit) + goto set_prev_continue; +damon_merge_two_regions (t, prev, r); +continue ; +set_prev_continue: + prev = r; } }Signature · 1 line
Sashiko AI review · https://sashiko.dev/#/patchset/[email protected]?part=7
Thanks,
SJ
SJ Park
maintainerRFC PATCH 8/16 mm/damon/core: disable access monitoring when probe weights are set
In reply to SJ ParkWhen users set probe weights, they are interested in the data attributes. Not necessarily they are interested in data access patterns. Disable the data access monitoring in the case.
--- mm/damon/core.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-)
mm/damon/core.c +3 -2
@@ -3714,17 +3714,18 @@ static int kdamond_fn(void *data)unsigned long next_aggregation_sis = ctx->next_aggregation_sis;unsigned long next_ops_update_sis = ctx->next_ops_update_sis;unsigned long sample_interval = ctx->attrs.sample_interval; +bool access_check_disabled =damon_has_probe_weights (ctx);if (kdamond_wait_activation (ctx))break ; -if (ctx->ops.prepare_access_checks) +if (!access_check_disabled && ctx->ops.prepare_access_checks) ctx->ops.prepare_access_checks (ctx);kdamond_usleep (sample_interval); ctx->passed_sample_intervals++; -if (ctx->ops.check_accesses) +if (!access_check_disabled && ctx->ops.check_accesses) max_nr_accesses = ctx->ops.check_accesses (ctx);if (ctx->ops.apply_probes) ctx->ops.apply_probes (ctx, false, false);
Signature · 1 line
2.47.3
[email protected]
AI reviewRe: [RFC PATCH 08/16] mm/damon/core: disable access monitoring when probe weights are set
Thank you for your contribution! Sashiko AI review found 3 potential issue(s) to consider:
Thank you for your contribution! Sashiko AI review found 3 potential issue(s) to consider:
New issues:
- [High] kdamond_merge_regions loop terminates prematurely because max_thres is capped by access count limit, breaking the scaling of threshold for probe hits.
- [High] Silent breakage of vaddr/fvaddr monitoring when probe weights are configured via sysfs.
Pre-existing issues:
- [High] Unbounded integer overflow of probe_hits array elements in struct damon_region. --
commit 6a6c230b9f6562af956ffa250fd34b615f031ce5
Author: SJ Park <[email protected]>
mm/damon/core: disable access monitoring when probe weights are set
When users set probe weights, they are interested in the data attributes. Not necessarily they are interested in data access patterns. Disable the data access monitoring in the case.
Quoted 13 lines
mm/damon/core.c +1
-0@@ -3670,17 +3670,18 @@ static int kdamond_fn(void *data)unsigned long next_aggregation_sis = ctx->next_aggregation_sis;unsigned long next_ops_update_sis = ctx->next_ops_update_sis;unsigned long sample_interval = ctx->attrs.sample_interval; +bool access_check_disabled =damon_has_probe_weights (ctx);if (kdamond_wait_activation (ctx))break ;
mm/damon/core.c static int kdamond_fn(void *data) · line 3685
Quoted 10 lines
mm/damon/core.c +2
-2-if (ctx->ops.prepare_access_checks) +if (!access_check_disabled && ctx->ops.prepare_access_checks) ctx->ops.prepare_access_checks (ctx);kdamond_usleep (sample_interval); ctx->passed_sample_intervals++; -if (ctx->ops.check_accesses) +if (!access_check_disabled && ctx->ops.check_accesses) max_nr_accesses = ctx->ops.check_accesses (ctx);
[Severity: High]
If a user configures a DAMON context with vaddr or fvaddr operations, and creates a probe via sysfs with a weight, will this bypass check_accesses without a fallback?
It appears that damon_has_probe_weights() will return true and access_check_disabled will become true.
This unconditionally bypasses ctx->ops.check_accesses(ctx).
However, if vaddr and fvaddr operations do not currently implement apply_probes (leaving it NULL), it seems no sampling will occur at all.
Does this silently leave the context without any functional monitoring for virtual address spaces?
mm/damon/core.c static int kdamond_fn(void *data) · line 3731
Quoted 2 lines
mm/damon/core.c +0
-0if (ctx->ops.apply_probes) ctx->ops.apply_probes (ctx, false, false);
[Severity: High]
Could this change cause the loop in kdamond_merge_regions() to exit prematurely when using probe weights?
When probe weights are enabled, kdamond_merge_regions() starts its region merging loop with an initial threshold scaled by the maximum probe hit weighted sum.
However, the loop's upper bound cap, max_thres, remains capped by the maximum possible access counts:
mm/damon/core.c:kdamond_merge_regions() {
...
} while (nr_regions > c->attrs.max_nr_regions &&
threshold / 2 < max_thres);
}Because a probe hit weighted sum can easily exceed the access-based max_thres by orders of magnitude, the loop condition can fail on the very first iteration.
Will this force the loop to exit prematurely without adequately doubling the threshold, leaving nr_regions exceeding max_nr_regions?
[Severity: High]
This isn't a bug introduced by this patch, but there is an unbounded integer overflow of the probe_hits array elements in struct damon_region.
Running DAMON with a large aggregation interval relative to the sample interval can cause the unsigned char probe_hits counter to wrap around.
In damon_pa_apply_probes(), the counter is incremented without bounds checking:
mm/damon/paddr.c:damon_pa_apply_probes() {
...
if (damon_pa_filter_pass(pa, folio, p))
r->probe_hits[i]++;
...
}Since probe_hits is defined as an unsigned char (max 255) in struct damon_region:
include/linux/damon.h {
...
unsigned char probe_hits[DAMON_MAX_PROBES];
...
}If a region satisfies a probe for more than 255 sampling intervals within a single aggregation window, the counter will wrap around to 0 multiple times.
Might this feed arbitrary garbage values to damon_probe_hits_wsum(), corrupting the metric that region merging and scheme application rely on?
Signature · 1 line
Sashiko AI review · https://sashiko.dev/#/patchset/[email protected]?part=8
SJ Park
maintainerRFC PATCH 9/16 mm/damon/core: set samples in apply_probes() if probe weights are set
In reply to SJ ParkWhen probe weights are set, the prepare_access_checks() ops callback is not invoked, so sampling addresses of regions are unset. Ask apply_probes() to set those together in the case.
--- mm/damon/core.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)
mm/damon/core.c +2 -1
@@ -3728,7 +3728,8 @@ static int kdamond_fn(void *data)if (!access_check_disabled && ctx->ops.check_accesses) max_nr_accesses = ctx->ops.check_accesses (ctx);if (ctx->ops.apply_probes) - ctx->ops.apply_probes (ctx, false, false); + ctx->ops.apply_probes (ctx, access_check_disabled, + false);if (time_after_eq (ctx->passed_sample_intervals, next_aggregation_sis)) {
Signature · 1 line
2.47.3
SJ Park
maintainerRFC PATCH 10/16 mm/damon/core: s/max_nr_accesses/max_merge_score/ in kdamond_fn()
In reply to SJ ParkWhen probe weights are set, DAMON merge logic works with the probe hits weighted sum. The core logic is setting the merge threshold based on the access frequency, though. Before using probe hits based threshold, rename the variables to look more general.
--- mm/damon/core.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-)
mm/damon/core.c +3 -3
@@ -3681,7 +3681,6 @@ static void kdamond_init_ctx(struct damon_ctx *ctx)static int kdamond_fn (void *data) {struct damon_ctx *ctx = data; -unsigned int max_nr_accesses =0 ;unsigned long sz_limit =0 ;pr_debug ("kdamond (%d) starts\n" , current->pid);
@@ -3715,6 +3714,7 @@ static int kdamond_fn(void *data)unsigned long next_ops_update_sis = ctx->next_ops_update_sis;unsigned long sample_interval = ctx->attrs.sample_interval;bool access_check_disabled =damon_has_probe_weights (ctx); +unsigned int max_merge_score =0 ;if (kdamond_wait_activation (ctx))break ;
@@ -3726,7 +3726,7 @@ static int kdamond_fn(void *data) ctx->passed_sample_intervals++;if (!access_check_disabled && ctx->ops.check_accesses) - max_nr_accesses = ctx->ops.check_accesses (ctx); + max_merge_score = ctx->ops.check_accesses (ctx);if (ctx->ops.apply_probes) ctx->ops.apply_probes (ctx, access_check_disabled, false);
@@ -3734,7 +3734,7 @@ static int kdamond_fn(void *data)if (time_after_eq (ctx->passed_sample_intervals, next_aggregation_sis)) {kdamond_merge_regions (ctx, - max_nr_accesses /10 , + max_merge_score /10 , sz_limit);/* online updates might be made */ sz_limit =damon_apply_min_nr_regions (ctx);
Signature · 1 line
2.47.3
SJ Park
maintainerRFC PATCH 11/16 mm/damon/core: get merge threshold from probe hits when weights are set
In reply to SJ ParkWhen probe weights are set, DAMON merges regions based on their probe hits weighted sum. But the merge threshold is calculated based on the access frequency. Update it to retrieve the maximum probe hits weighted sum in the snapshot from apply_probes() ops callback, and generate the threshold based on it.
--- mm/damon/core.c | 18 ++++++++++++++---- 1 file changed, 14 insertions(+), 4 deletions(-)
mm/damon/core.c +14 -4
@@ -3714,7 +3714,8 @@ static int kdamond_fn(void *data)unsigned long next_ops_update_sis = ctx->next_ops_update_sis;unsigned long sample_interval = ctx->attrs.sample_interval;bool access_check_disabled =damon_has_probe_weights (ctx); -unsigned int max_merge_score =0 ; +unsigned int max_merge_score =0 , max_wsum; +bool get_max_wsum;if (kdamond_wait_activation (ctx))break ;
@@ -3727,9 +3728,18 @@ static int kdamond_fn(void *data)if (!access_check_disabled && ctx->ops.check_accesses) max_merge_score = ctx->ops.check_accesses (ctx); -if (ctx->ops.apply_probes) - ctx->ops.apply_probes (ctx, access_check_disabled, - false); +if (ctx->ops.apply_probes) { +if (time_after_eq (ctx->passed_sample_intervals, + next_aggregation_sis) && + access_check_disabled) + get_max_wsum = true; +else + get_max_wsum = false; + max_wsum = ctx->ops.apply_probes (ctx, + access_check_disabled, get_max_wsum); +if (get_max_wsum) + max_merge_score = max_wsum; + }if (time_after_eq (ctx->passed_sample_intervals, next_aggregation_sis)) {
Signature · 1 line
2.47.3
[email protected]
AI reviewRe: [RFC PATCH 11/16] mm/damon/core: get merge threshold from probe hits when weights are set
Thank you for your contribution! Sashiko AI review found 2 potential issue(s) to consider:
Thank you for your contribution! Sashiko AI review found 2 potential issue(s) to consider:
New issues:
- [High] The merge threshold limit (max_thres) in kdamond_merge_regions is not scaled for probe weights, causing premature termination of the region merging loop and failing to enforce the user-defined max_nr_regions limit.
Pre-existing issues:
- [High] When probe weights are configured for operations that do not implement apply_probes (e.g., vaddr), the merge threshold becomes 0 and regions are improperly and aggressively merged. --
commit 23bf451408faae1b0a1f1eb841dc6f4b60077861
Author: SJ Park <[email protected]>
Subject: mm/damon/core: get merge threshold from probe hits when weights are set
When probe weights are set, DAMON merges regions based on their probe hits weighted sum, but the merge threshold is calculated based on access frequency. Update it to retrieve the maximum probe hits weighted sum in the snapshot from the apply_probes() ops callback, and generate the threshold based on it.
Quoted 13 lines
mm/damon/core.c +2
-3@@ -3683,9 +3684,18 @@ static int kdamond_fn(void *data)if (!access_check_disabled && ctx->ops.check_accesses) max_merge_score = ctx->ops.check_accesses (ctx); -if (ctx->ops.apply_probes) - ctx->ops.apply_probes (ctx, access_check_disabled, - false); +if (ctx->ops.apply_probes) { + if (time_after_eq(ctx->passed_sample_intervals,
mm/damon/core.c static int kdamond_fn(void *data) · line 3698
Quoted 10 lines
mm/damon/core.c +10
-0+ next_aggregation_sis) && + access_check_disabled) + get_max_wsum = true; + else + get_max_wsum = false; + max_wsum = ctx->ops.apply_probes (ctx, + access_check_disabled, get_max_wsum); +if (get_max_wsum) + max_merge_score = max_wsum; + }
[Severity: High]
This is a pre-existing issue, but what happens if a user configures probe weights for operations that do not implement apply_probes (like vaddr)?
When damon_has_probe_weights() returns true, access checks are disabled. If the operations lack an apply_probes callback, max_merge_score will remain 0.
Will this cause all regions to be improperly and unconditionally merged into maximum-sized chunks, resulting in a loss of monitoring resolution?
[Severity: High]
Does kdamond_merge_regions() properly handle this new weight-based score limit?
Just after this block, max_merge_score is passed into kdamond_merge_regions():
mm/damon/core.c:kdamond_fn() {
...
if (time_after_eq(ctx->passed_sample_intervals,
next_aggregation_sis)) {
kdamond_merge_regions(ctx,
max_merge_score / 10,
sz_limit);
...
}Because max_thres inside kdamond_merge_regions() is hardcoded to the maximum possible frequency of unweighted accesses, rather than dynamically accounting for probe weights, the scaling loop termination condition:
mm/damon/core.c:kdamond_merge_regions() {
...
} while (nr_regions > c->attrs.max_nr_regions &&
threshold / 2 < max_thres);
...
}appears to instantly fail when the initial threshold is already large due to probe weights.
Will this cause an early abort of the fallback loop, leaving regions unmerged and failing to enforce the max_nr_regions limit?
Quoted 3 lines
mm/damon/core.c +0
-0if (time_after_eq (ctx->passed_sample_intervals, next_aggregation_sis)) {
Signature · 1 line
Sashiko AI review · https://sashiko.dev/#/patchset/[email protected]?part=11
SJ Park
maintainerRe: [RFC PATCH 11/16] mm/damon/core: get merge threshold from probe hits when weights are set
Quoted 46 lines · On Sun, 05 Jul 2026 21:12:08 +0000 [email protected] wrote:
Thank you for your contribution! Sashiko AI review found 2 potential issue(s) to consider:
New issues:
- [High] The merge threshold limit (max_thres) inkdamond_merge_regionsis not scaled for probe weights, causing premature termination of the region merging loop and failing to enforce the user-definedmax_nr_regionslimit.Pre-existing issues:
- [High] When probe weights are configured for operations that do not implementapply_probes(e.g.,vaddr), the merge threshold becomes 0 and regions are improperly and aggressively merged. --commit
23bf451408faae1b0a1f1eb841dc6f4b60077861
Author: SJ Park <[email protected]>
Subject:mm/damon/core: get merge threshold from probe hits when weights are setWhen probe weights are set, DAMON merges regions based on their probe hits weighted sum, but the merge threshold is calculated based on access frequency. Update it to retrieve the maximum probe hits weighted sum in the snapshot from the
apply_probes()ops callback, and generate the threshold based on it.Quoted 13 lines
mm/damon/core.c +2
-3@@ -3683,9 +3684,18 @@ static int kdamond_fn(void *data)if (!access_check_disabled && ctx->ops.check_accesses) max_merge_score = ctx->ops.check_accesses (ctx); -if (ctx->ops.apply_probes) - ctx->ops.apply_probes (ctx, access_check_disabled, - false); +if (ctx->ops.apply_probes) { + if (time_after_eq(ctx->passed_sample_intervals,mm/damon/core.c static int kdamond_fn(void *data) · line 3698
Quoted 10 lines
mm/damon/core.c +10
-0+ next_aggregation_sis) && + access_check_disabled) + get_max_wsum = true; + else + get_max_wsum = false; + max_wsum = ctx->ops.apply_probes (ctx, + access_check_disabled, get_max_wsum); +if (get_max_wsum) + max_merge_score = max_wsum; + }[Severity: High]
This is a pre-existing issue, but what happens if a user configures probe weights for operations that do not implementapply_probes(like vaddr)?
Quoted 5 lines
When
damon_has_probe_weights()returns true, access checks are disabled. If the operations lack anapply_probescallback,max_merge_scorewill remain 0.Will this cause all regions to be improperly and unconditionally merged into maximum-sized chunks, resulting in a loss of monitoring resolution?
Correct, and that's no problem. Users who wrongly configured DAMON get poor output. As long as no critical consequences like kernel crash or memory leaks happen, I believe this is fine.
Quoted 27 lines
[Severity: High]
Doeskdamond_merge_regions()properly handle this new weight-based score limit?Just after this block,
max_merge_scoreis passed intokdamond_merge_regions():mm/damon/core.c:kdamond_fn() { ... if (time_after_eq(ctx->passed_sample_intervals, next_aggregation_sis)) { kdamond_merge_regions(ctx, max_merge_score / 10, sz_limit); ... }Because
max_thresinsidekdamond_merge_regions()is hardcoded to the maximum possible frequency of unweighted accesses, rather than dynamically accounting for probe weights, the scaling loop termination condition:mm/damon/core.c:kdamond_merge_regions() { ... } while (nr_regions > c->attrs.max_nr_regions && threshold / 2 < max_thres); ... }
Quoted 5 lines
appears to instantly fail when the initial threshold is already large due to probe weights.
Will this cause an early abort of the fallback loop, leaving regions unmerged and failing to enforce the
max_nr_regionslimit?
Yes, and the later patch in this series will fix it. Also, to make it no real issue even before the later patch, we set thee mode detection to say no. So the issue cannot happen in the real world.
Quoted 7 lines
Quoted 4 lines
mm/damon/core.c +0
-0if (time_after_eq (ctx->passed_sample_intervals, next_aggregation_sis)) {Signature · 1 line
Sashiko AI review · https://sashiko.dev/#/patchset/[email protected]?part=11
Thanks,
SJ
SJ Park
maintainerRFC PATCH 12/16 mm/damon/core: implement damon_has_probe_weight()
In reply to SJ ParkDAMON monitors only data attributes when probe weights are set. However, the function for detecting it is intentionally returning false always. The intention was to make changes for complete support of the mode in a safe and incremental way. Now all the building blocks are made. Complete the mode detection function so that the mode can really start working.
--- mm/damon/core.c | 6 ++++++ 1 file changed, 6 insertions(+)
mm/damon/core.c +6 -0
@@ -211,6 +211,12 @@ static struct damon_probe *damon_nth_probe(int n, struct damon_ctx *ctx)static bool damon_has_probe_weights (struct damon_ctx *c) { +struct damon_probe *p; + +damon_for_each_probe (p, c) { +if (p->weight) +return true; + }return false; }
Signature · 1 line
2.47.3
[email protected]
AI reviewRe: [RFC PATCH 12/16] mm/damon/core: implement damon_has_probe_weight()
Thank you for your contribution! Sashiko AI review found 3 potential issue(s) to consider:
Thank you for your contribution! Sashiko AI review found 3 potential issue(s) to consider:
New issues:
- [High] damon_has_probe_weights() returns true even for DAMON contexts that do not implement the apply_probes operation callback (e.g., vaddr and fvaddr), causing DAMON to silently bypass access checks and completely stop monitoring memory.
Pre-existing issues:
- [High] Integer overflow in abs() macro usage with large unsigned probe scores breaks DAMON region merging.
- [High] Multiplication overflow in damon_merge_two_regions when calculating merged probe hits and access counts on 32-bit systems. --
commit 4b421534e3283ef89ac2afef3f02956b0510da1e
Author: SJ Park <[email protected]>
mm/damon/core: implement damon_has_probe_weight()
DAMON monitors only data attributes when probe weights are set. However, the function for detecting it is intentionally returning false always. Now all the building blocks are made. Complete the mode detection function so that the mode can really start working.
Quoted 5 lines
mm/damon/core.c +0
-0
mm/damon/core.c static struct damon_probe *damon_nth_probe(int n, struct damon_ctx *ctx) · line 219
Quoted 9 lines
mm/damon/core.c +6
-0@@ -211,6 +211,12 @@ static struct damon_probe *damon_nth_probe(int n, struct damon_ctx *ctx)static bool damon_has_probe_weights (struct damon_ctx *c) { +struct damon_probe *p; + +damon_for_each_probe (p, c) { +if (p->weight) +return true; + }
[Severity: High]
Does this code need to check if the underlying ops struct supports probes?
If a context like vaddr or fvaddr has a probe weight configured via sysfs, this will return true. This causes access_check_disabled to be set to true in kdamond_fn(), which skips check_accesses():
mm/damon/core.c:kdamond_fn() {
...
bool access_check_disabled = damon_has_probe_weights(ctx);
...
}Because ctx->ops.apply_probes is NULL for vaddr, the apply block is then skipped and max_merge_score remains 0, which causes kdamond_merge_regions() to aggressively merge everything with a threshold of 0.
mm/damon/core.c static struct damon_probe *damon_nth_probe(int n, struct damon_ctx *ctx) · line 221
Quoted 2 lines
mm/damon/core.c +0
-0return false; }
I also noticed a couple of pre-existing issues in this file:
[Severity: High]
This is a pre-existing issue, but does this code overflow the 32-bit boundary on 32-bit systems?
mm/damon/core.c:damon_merge_two_regions() {
[ ... ]
l->nr_accesses = (l->nr_accesses * sz_l + r->nr_accesses * sz_r) / (sz_l + sz_r); [ ... ] for (i = 0; i < DAMON_MAX_PROBES; i++) l->probe_hits[i] = (l->probe_hits[i] * sz_l + r->probe_hits[i] * sz_r) / (sz_l + sz_r);
[ ... ]
}
If a region size reaches around 42MB on a 32-bit architecture and nr_accesses is around 100, the multiplication nr_accesses * sz_l could exceed 4.2 billion and silently overflow the 32-bit unsigned long, corrupting the memory access statistics for merged regions.
[Severity: High]
This is a pre-existing issue, but can the absolute difference of two large unsigned integers be evaluated incorrectly here?
mm/damon/core.c:damon_merge_regions_of() {
[ ... ]
score = damon_merge_score(r, false, ctx, use_probe_hits); last_score = damon_merge_score(r, true, ctx, use_probe_hits); if (abs(score - last_score) > thres) r->age = 0;
[ ... ]
}
If a user configures a large probe weight via sysfs such that the weighted sum exceeds INT_MAX, score - last_score produces a large unsigned int. The abs() macro explicitly casts unsigned types to signed types, which would wrap into a negative signed integer and then be negated into a much smaller positive value. This could bypass the greater than threshold check and prevent regions from resetting their age.
Signature · 1 line
Sashiko AI review · https://sashiko.dev/#/patchset/[email protected]?part=12
SJ Park
maintainerRe: [RFC PATCH 12/16] mm/damon/core: implement damon_has_probe_weight()
Quoted 48 lines · On Sun, 05 Jul 2026 21:15:52 +0000 [email protected] wrote:
Thank you for your contribution! Sashiko AI review found 3 potential issue(s) to consider:
New issues:
- [High]damon_has_probe_weights()returnstrueeven for DAMON contexts that do not implement theapply_probesoperation callback (e.g.,vaddrandfvaddr), causing DAMON to silently bypass access checks and completely stop monitoring memory.Pre-existing issues:
- [High] Integer overflow inabs()macro usage with large unsigned probe scores breaks DAMON region merging.
- [High] Multiplication overflow indamon_merge_two_regionswhen calculating merged probe hits and access counts on 32-bit systems. --commit
4b421534e3283ef89ac2afef3f02956b0510da1e
Author: SJ Park <[email protected]>
mm/damon/core: implementdamon_has_probe_weight()DAMON monitors only data attributes when probe weights are set. However, the function for detecting it is intentionally returning false always. Now all the building blocks are made. Complete the mode detection function so that the mode can really start working.
Quoted 5 lines
mm/damon/core.c +0
-0mm/damon/core.c static struct damon_probe *damon_nth_probe(int n, struct damon_ctx *ctx) · line 219
Quoted 9 lines
mm/damon/core.c +6
-0@@ -211,6 +211,12 @@ static struct damon_probe *damon_nth_probe(int n, struct damon_ctx *ctx)static bool damon_has_probe_weights (struct damon_ctx *c) { +struct damon_probe *p; + +damon_for_each_probe (p, c) { +if (p->weight) +return true; + }[Severity: High]
Does this code need to check if the underlying ops struct supports probes?If a context like vaddr or fvaddr has a probe weight configured via sysfs, this will return true. This causes
access_check_disabledto be set to true inkdamond_fn(), which skipscheck_accesses():mm/damon/core.c:kdamond_fn() { ... bool access_check_disabled = damon_has_probe_weights(ctx); ... }
Quoted 3 lines
Because
ctx->ops.apply_probesis NULL for vaddr, the apply block is then skipped andmax_merge_scoreremains 0, which causeskdamond_merge_regions()to aggressively merge everything with a threshold of 0.
Yes, and no problem. Users wrongly configure DAMON will get poor quality of outputs. No real bad consequences like kernel crash or memory leak happen.
Quoted 18 lines
mm/damon/core.c static struct damon_probe *damon_nth_probe(int n, struct damon_ctx *ctx) · line 221
Quoted 3 lines
mm/damon/core.c +0
-0return false; }I also noticed a couple of pre-existing issues in this file:
[Severity: High]
This is a pre-existing issue, but does this code overflow the 32-bit boundary on 32-bit systems?mm/damon/core.c:damon_merge_two_regions() {
[ ... ]l->nr_accesses = (l->nr_accesses * sz_l + r->nr_accesses * sz_r) / (sz_l + sz_r); [ ... ] for (i = 0; i < DAMON_MAX_PROBES; i++) l->probe_hits[i] = (l->probe_hits[i] * sz_l + r->probe_hits[i] * sz_r) / (sz_l + sz_r);
Quoted 7 lines
[ ... ]
}If a region size reaches around 42MB on a 32-bit architecture and
nr_accessesis around 100, the multiplicationnr_accesses*sz_lcould exceed 4.2 billion and silently overflow the 32-bit unsigned long, corrupting the memory access statistics for merged regions.
Known low priority issue. On 32-bit architectures users could use the addr_unit parameter to avoid this.
Quoted 15 lines
[Severity: High]
This is a pre-existing issue, but can the absolute difference of two large unsigned integers be evaluated incorrectly here?mm/damon/core.c:damon_merge_regions_of() {
[ ... ]score = damon_merge_score(r, false, ctx, use_probe_hits); last_score = damon_merge_score(r, true, ctx, use_probe_hits); if (abs(score - last_score) > thres) r->age = 0;[ ... ]
}
Quoted 6 lines
If a user configures a large probe weight via sysfs such that the weighted sum exceeds
INT_MAX, score -last_scoreproduces a large unsigned int. Theabs()macro explicitly casts unsigned types to signed types, which would wrap into a negative signed integer and then be negated into a much smaller positive value. This could bypass the greater than threshold check and prevent regions from resetting their age.
Pre-existing issue. I will separately work on this.
Quoted 3 lines
Signature · 2 lines
-- Sashiko AI review · https://sashiko.dev/#/patchset/[email protected]?part=12
Thanks,
SJ
SJ Park
maintainerRFC PATCH 13/16 mm/damon/sysfs: implement probe/weight file
In reply to SJ ParkImplement a new sysfs file, 'weight', under probe directory. Users will be able to set the probe weight and enable the attributes only monitoring using it.
--- mm/damon/sysfs.c | 25 +++++++++++++++++++++++++ 1 file changed, 25 insertions(+)
mm/damon/sysfs.c +25 -0
@@ -1065,6 +1065,7 @@ static const struct kobj_type damon_sysfs_filters_ktype = {struct damon_sysfs_probe {struct kobject kobj; +unsigned int weight;struct damon_sysfs_filters *filters; };
@@ -1100,12 +1101,35 @@ static void damon_sysfs_probe_rm_dirs(struct damon_sysfs_probe *probe) } } +static ssize_t weight_show (struct kobject *kobj,struct kobj_attribute *attr, +char *buf) +{ +struct damon_sysfs_probe *probe =container_of (kobj, + struct damon_sysfs_probe, kobj); + +return sysfs_emit (buf,"%u\n" , probe->weight); +} + +static ssize_t weight_store (struct kobject *kobj, +struct kobj_attribute *attr,const char *buf,size_t count) +{ +struct damon_sysfs_probe *probe =container_of (kobj, + struct damon_sysfs_probe, kobj); +int err =kstrtouint (buf,0 , &probe->weight); + +return err ? err : count; +} +static void damon_sysfs_probe_release (struct kobject *kobj) {kfree (container_of(kobj ,struct damon_sysfs_probe ,kobj )); } +static struct kobj_attribute damon_sysfs_probe_weight_attr = +__ATTR_RW_MODE (weight,0600 ); +static struct attribute *damon_sysfs_probe_attrs[] = { + &damon_sysfs_probe_weight_attr.attr,NULL , };ATTRIBUTE_GROUPS (damon_sysfs_probe);
@@ -1965,6 +1989,7 @@ static int damon_sysfs_set_probes(struct damon_ctx *ctx,return -ENOMEM ;damon_add_probe (ctx, p); sys_probe = sys_probes->probes_arr[i]; + p->weight = sys_probe->weight; err =damon_sysfs_set_probe (p, sys_probe);if (err)return err;
Signature · 1 line
2.47.3
SJ Park
maintainerRFC PATCH 14/16 Docs/mm/damon/design: document attrs-only monitoring
In reply to SJ ParkUpdate DAMON design document for the attributes only monitoring mode.
--- Documentation/mm/damon/design.rst | 20 ++++++++++++++++++++ 1 file changed, 20 insertions(+)
Documentation/mm/damon/design.rst +20 -0
@@ -316,6 +316,26 @@ Another way to do this for higher accuracy is using :ref:`DAMOS filter information in page level. But, because it is operated in page level, the overhead is proportional to the size of the memory. +Data Attributes-only Monitoring +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +Data access is the primary monitoring information for DAMON. Hence it +:ref:`adjusts <damon_design_data_attrs_monitoring>` regions using the access +:ref:`counter <damon_design_region_based_sampling>` (``nr_accesses``). In some +use cases, however, users may want some of :ref:`attributes +<damon_design_data_attrs_monitoring>` to be the primary information. + +Data attributes-only monitoring mode supports this use case. For the mode, +each attribute probe has their priority weight value. Users can describe by +what combination of the attributes the primary information is deeecided, by +setting the priority weight value. If the total sum of the weights is not +zero, the mode is enabled. The regions adjustment mechaanism uses the weighted +sum of the :ref:`probe hit counts <damon_design_data_attrs_monitoring>` instead +of ``nr_accesses`` in the case. When the mode is enabled, access monitoring is +automatically turned off. The access counter (``nr_accesses``) will always be +zero and not updated. Hence the mode is called Data Attributes "only" +monitoring. + Dynamic Target Space Updates Handling ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Signature · 1 line
2.47.3
[email protected]
AI reviewRe: [RFC PATCH 14/16] Docs/mm/damon/design: document attrs-only monitoring
Thank you for your contribution! Sashiko AI review found 1 potential issue(s) to consider: - [Low] Spelling mistakes in the newly added documentation: 'deeecided' and 'mechaanism'. --
Thank you for your contribution! Sashiko AI review found 1 potential issue(s) to consider:
- [Low] Spelling mistakes in the newly added documentation: 'deeecided' and 'mechaanism'. --
commit 802f6df741c5d3bfcb1ed21eadbf33ebee4db496
Author: SJ Park <[email protected]>
Docs/mm/damon/design: document attrs-only monitoring
This commit updates the DAMON design document to include a section describing the data attributes-only monitoring mode.
Quoted 4 lines
Documentation/mm/damon/design.rst +0
-0
[ ... ]
Quoted 6 lines
Documentation/mm/damon/design.rst +2
-0@@ -316,6 +316,26 @@ Another way to do this for higher accuracy is using :ref:`DAMOS filter information in page level. But, because it is operated in page level, the overhead is proportional to the size of the memory. +Data Attributes-only Monitoring +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Documentation/mm/damon/design.rst Another way to do this for higher accuracy is using :ref:`DAMOS filter · line 330
Quoted 10 lines
Documentation/mm/damon/design.rst +10
-0+ +Data access is the primary monitoring information for DAMON. Hence it +:ref:`adjusts <damon_design_data_attrs_monitoring>` regions using the access +:ref:`counter <damon_design_region_based_sampling>` (``nr_accesses``). In some +use cases, however, users may want some of :ref:`attributes +<damon_design_data_attrs_monitoring>` to be the primary information. + +Data attributes-only monitoring mode supports this use case. For the mode, +each attribute probe has their priority weight value. Users can describe by +what combination of the attributes the primary information is deeecided, by
[Severity: Low]
This isn't a bug, but there is a typo here: "deeecided" should be "decided".
Documentation/mm/damon/design.rst Another way to do this for higher accuracy is using :ref:`DAMOS filter · line 332
Quoted 2 lines
Documentation/mm/damon/design.rst +2
-0+setting the priority weight value. If the total sum of the weights is not +zero, the mode is enabled. The regions adjustment mechaanism uses the weighted
[Severity: Low]
This isn't a bug, but there is another typo here: "mechaanism" should be "mechanism".
Quoted 6 lines
Documentation/mm/damon/design.rst +6
-0+sum of the :ref:`probe hit counts <damon_design_data_attrs_monitoring>` instead +of ``nr_accesses`` in the case. When the mode is enabled, access monitoring is +automatically turned off. The access counter (``nr_accesses``) will always be +zero and not updated. Hence the mode is called Data Attributes "only" +monitoring. +
Signature · 1 line
Sashiko AI review · https://sashiko.dev/#/patchset/[email protected]?part=14
SJ Park
maintainerRe: [RFC PATCH 14/16] Docs/mm/damon/design: document attrs-only monitoring
Quoted 23 lines · On Sun, 05 Jul 2026 21:05:19 +0000 [email protected] wrote:
Thank you for your contribution! Sashiko AI review found 1 potential issue(s) to consider:
- [Low] Spelling mistakes in the newly added documentation: 'deeecided' and 'mechaanism'. --commit
802f6df741c5d3bfcb1ed21eadbf33ebee4db496
Author: SJ Park <[email protected]>Docs/mm/damon/design: document attrs-only monitoring
This commit updates the DAMON design document to include a section describing the data attributes-only monitoring mode.
Quoted 4 lines
Documentation/mm/damon/design.rst +0
-0[ ... ]
Quoted 4 lines
Documentation/mm/damon/design.rst +0
-0@@ -316,6 +316,26 @@ Another way to do this for higher accuracy is using :ref:`DAMOS filter information in page level. But, because it is operated in page level, the overhead is proportional to the size of the memory.
Quoted 15 lines
Documentation/mm/damon/design.rst Another way to do this for higher accuracy is using :ref:`DAMOS filter · line 330
Quoted 12 lines
Documentation/mm/damon/design.rst +12
-0+Data Attributes-only Monitoring +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +Data access is the primary monitoring information for DAMON. Hence it +:ref:`adjusts <damon_design_data_attrs_monitoring>` regions using the access +:ref:`counter <damon_design_region_based_sampling>` (``nr_accesses``). In some +use cases, however, users may want some of :ref:`attributes +<damon_design_data_attrs_monitoring>` to be the primary information. + +Data attributes-only monitoring mode supports this use case. For the mode, +each attribute probe has their priority weight value. Users can describe by +what combination of the attributes the primary information is deeecided, by[Severity: Low]
This isn't a bug, but there is a typo here: "deeecided" should be "decided".
Good finding. I will fix this in the next revision.
Quoted 7 lines
Documentation/mm/damon/design.rst Another way to do this for higher accuracy is using :ref:`DAMOS filter · line 332
Quoted 3 lines
Documentation/mm/damon/design.rst +2
-0+setting the priority weight value. If the total sum of the weights is not +zero, the mode is enabled. The regions adjustment mechaanism uses the weighted[Severity: Low]
This isn't a bug, but there is another typo here: "mechaanism" should be "mechanism".
Ditto.
Quoted 10 lines
Quoted 7 lines
Documentation/mm/damon/design.rst +6
-0+sum of the :ref:`probe hit counts <damon_design_data_attrs_monitoring>` instead +of ``nr_accesses`` in the case. When the mode is enabled, access monitoring is +automatically turned off. The access counter (``nr_accesses``) will always be +zero and not updated. Hence the mode is called Data Attributes "only" +monitoring. +Signature · 1 line
Sashiko AI review · https://sashiko.dev/#/patchset/[email protected]?part=14
Thanks,
SJ
SJ Park
maintainerRFC PATCH 15/16 Docs/admin-guide/mm/damon/usage: document weight sysfs file
In reply to SJ ParkUpdate DAMON usage document for newly added probe weight file.
--- Documentation/admin-guide/mm/damon/usage.rst | 11 ++++++++--- Documentation/mm/damon/design.rst | 5 +++++ 2 files changed, 13 insertions(+), 3 deletions(-)
Documentation/admin-guide/mm/damon/usage.rst +8 -3
@@ -73,9 +73,10 @@ comma (","). │ │ │ │ │ │ │ intervals_goal/access_bp,aggrs,min_sample_us,max_sample_us │ │ │ │ │ │ nr_regions/min,max │ │ │ │ │ │ :ref:`probes <damon_usage_sysfs_probes>`/nr_probes - │ │ │ │ │ │ │ 0/filters/nr_filters - │ │ │ │ │ │ │ │ 0/type,matching,allow,path - │ │ │ │ │ │ │ │ ... + │ │ │ │ │ │ │ 0/weight + │ │ │ │ │ │ │ │ filters/nr_filters + │ │ │ │ │ │ │ │ │ 0/type,matching,allow,path + │ │ │ │ │ │ │ │ │ ... │ │ │ │ │ │ │ ... │ │ │ │ │ :ref:`targets <sysfs_targets>`/nr_targets │ │ │ │ │ │ :ref:`0 <sysfs_target>`/pid_target,obsolete_target
@@ -286,6 +287,10 @@ In each probe directory, one directory, ``filters`` exists. The directory contains files for installing filters for the probe, that is used to determine the data attribute for the probe. +Each probe directory also contains ``weight`` file. Reading from and writing +to the file gets and sets the :ref:`atttributes-only monitoring +<damon_design_attrs_only_monitoring>` weight for the attribute of the probe. + In the beginning, ``filters`` directory has only one file, ``nr_filters``. Writing a number (``N``) to the file creates the number of child directories named ``0`` to ``N-1``. Each directory represents each filter and works in a
Documentation/mm/damon/design.rst +5 -0
@@ -316,6 +316,8 @@ Another way to do this for higher accuracy is using :ref:`DAMOS filter information in page level. But, because it is operated in page level, the overhead is proportional to the size of the memory. +.. _damon_design_attrs_only_monitoring: + Data Attributes-only Monitoring ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
@@ -336,6 +338,9 @@ automatically turned off. The access counter (``nr_accesses``) will always be zero and not updated. Hence the mode is called Data Attributes "only" monitoring. +Refer to the :ref:`admin guide <damon_usage_sysfs_probes>` to know how users +can use the mode. + Dynamic Target Space Updates Handling ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Signature · 1 line
2.47.3
[email protected]
AI reviewRe: [RFC PATCH 15/16] Docs/admin-guide/mm/damon/usage: document weight sysfs file
Thank you for your contribution! Sashiko AI review found 1 potential issue(s) to consider: - [Low] Misspelled word 'atttributes' with three 't's in the added documentation. --
Thank you for your contribution! Sashiko AI review found 1 potential issue(s) to consider:
- [Low] Misspelled word 'atttributes' with three 't's in the added documentation. --
commit 0678cc4de62904aa4e60ad181dd2e6c07336bf2d
Author: SJ Park <[email protected]>
Docs/admin-guide/mm/damon/usage: document weight sysfs file
This commit updates the DAMON usage document to include the newly added probe weight file.
Quoted 4 lines
Documentation/admin-guide/mm/damon/usage.rst +0
-0
[ ... ]
Documentation/admin-guide/mm/damon/usage.rst In each probe directory, one directory, ``filters`` exists. The directory · line 291
Quoted 6 lines
Documentation/admin-guide/mm/damon/usage.rst +2
-0@@ -286,6 +287,10 @@ In each probe directory, one directory, ``filters`` exists. The directory contains files for installing filters for the probe, that is used to determine the data attribute for the probe. +Each probe directory also contains ``weight`` file. Reading from and writing +to the file gets and sets the :ref:`atttributes-only monitoring
[Severity: Low]
This isn't a bug, but there is a typo here. The word attributes is misspelled with three ts.
Quoted 4 lines
Documentation/admin-guide/mm/damon/usage.rst +2
-0+<damon_design_attrs_only_monitoring>` weight for the attribute of the probe. + In the beginning, ``filters`` directory has only one file, ``nr_filters``. Writing a number (``N``) to the file creates the number of child directories
Signature · 1 line
Sashiko AI review · https://sashiko.dev/#/patchset/[email protected]?part=15
SJ Park
maintainerRe: [RFC PATCH 15/16] Docs/admin-guide/mm/damon/usage: document weight sysfs file
Quoted 23 lines · On Sun, 05 Jul 2026 21:07:06 +0000 [email protected] wrote:
Thank you for your contribution! Sashiko AI review found 1 potential issue(s) to consider:
- [Low] Misspelled word 'atttributes' with three 't's in the added documentation. --commit
0678cc4de62904aa4e60ad181dd2e6c07336bf2d
Author: SJ Park <[email protected]>Docs/admin-guide/mm/damon/usage: document weight sysfs file
This commit updates the DAMON usage document to include the newly added probe weight file.
Quoted 4 lines
Documentation/admin-guide/mm/damon/usage.rst +0
-0[ ... ]
Quoted 4 lines
Documentation/admin-guide/mm/damon/usage.rst +0
-0@@ -286,6 +287,10 @@ In each probe directory, one directory, ``filters`` exists. The directory contains files for installing filters for the probe, that is used to determine the data attribute for the probe.
Quoted 6 lines
Documentation/admin-guide/mm/damon/usage.rst In each probe directory, one directory, ``filters`` exists. The directory · line 291
Quoted 2 lines
Documentation/admin-guide/mm/damon/usage.rst +2
-0+Each probe directory also contains ``weight`` file. Reading from and writing +to the file gets and sets the :ref:`atttributes-only monitoring[Severity: Low]
This isn't a bug, but there is a typo here. The word attributes is misspelled with three ts.
Good finding, I will fix this in the next revision.
Quoted 8 lines
Quoted 5 lines
Documentation/admin-guide/mm/damon/usage.rst +2
-0+<damon_design_attrs_only_monitoring>` weight for the attribute of the probe. + In the beginning, ``filters`` directory has only one file, ``nr_filters``. Writing a number (``N``) to the file creates the number of child directoriesSignature · 1 line
Sashiko AI review · https://sashiko.dev/#/patchset/[email protected]?part=15
Thanks,
SJ
SJ Park
maintainerRFC PATCH 16/16 Docs/ABI/damon: document probe weight file
In reply to SJ ParkUpdate DAMON ABI document for the newly added probe weight sysfs file.
--- Documentation/ABI/testing/sysfs-kernel-mm-damon | 6 ++++++ 1 file changed, 6 insertions(+)
Documentation/ABI/testing/sysfs-kernel-mm-damon +6 -0
@@ -164,6 +164,12 @@ Description: Writing a number 'N' to this file creates the number of directories for each DAMON probe named '0' to 'N-1' under the probes/ directory. +What: /sys/kernel/mm/damon/admin/kdamonds/<K>/contexts/<C>/monitoring_attrs/probes/<P>/weight +Date: Jul 2026 +Contact: SJ Park <[email protected]> +Description: Writing to and reading from this file sets and gets the + per-probe attribute weight. + What: /sys/kernel/mm/damon/admin/kdamonds/<K>/contexts/<C>/monitoring_attrs/probes/<P>/filters/nr_filters Date: May 2026 Contact: SJ Park <[email protected]>
Signature · 1 line
2.47.3