Skip to contentSkip to conversation

i2ctransfer: Print modifier flags in PRINT_HEADER

PATCH Applied Benoît Monin 2 participants 2 messages Jul 6 – Jul 7 I2C subsystem host drivers

lore
Share & tools
lore
#0 lore raw

PATCH 1/1 i2ctransfer: Print modifier flags in PRINT_HEADER

Print the optional message modifier flags when printing the message header. For example:

    i2ctransfer -v -y 3 pr1@0x33 itr1@0x33
    msg 0: addr 0x33, read, len 1, emit STOP, buf 0x10
    msg 1: addr 0x33, read, len 1, ignore NACK, toggle read/write bit, buf 0x10

If no optional flag is set, the output is unchanged.

---
 tools/i2ctransfer.c | 20 ++++++++++++++++++++
 1 file changed, 20 insertions(+)
tools/i2ctransfer.c +20 -0
index a49b734..0a310a7 100644
@@ -123,6 +123,26 @@ static void print_msgs(struct i2c_msg *msgs, __u32 nmsgs, unsigned int flags)
 				fprintf(output, "%u", len);
 			else
 				fprintf(output, "TBD");
+#ifdef I2C_M_IGNORE_NAK
+			if (msgs[i].flags & I2C_M_IGNORE_NAK)
+				fprintf(output, ", ignore NACK");
+#endif
+#ifdef I2C_M_NO_RD_ACK
+			if (msgs[i].flags & I2C_M_NO_RD_ACK)
+				fprintf(output, ", no master ACK/NACK bit");
+#endif
+#ifdef I2C_M_STOP
+			if (msgs[i].flags & I2C_M_STOP)
+				fprintf(output, ", emit STOP");
+#endif
+#ifdef I2C_M_NOSTART
+			if (msgs[i].flags & I2C_M_NOSTART)
+				fprintf(output, ", skip repeated start");
+#endif
+#ifdef I2C_M_REV_DIR_ADDR
+			if (msgs[i].flags & I2C_M_REV_DIR_ADDR)
+				fprintf(output, ", toggle read/write bit");
+#endif
 		}
 
 		if (len && print_buf) {

---
base-commit: 5852f5375eea6ca9dabf31f4772cb8b8ecc905d8
change-id: 20260706-print-header-flags-e841fc4398ed

Best regards,

Signature · 3 lines
Benoît Monin, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com
Applied
#1 lore raw
Quoted 10 lines · Benoît Monin

Print the optional message modifier flags when printing the message header. For example:

    i2ctransfer -v -y 3 pr1@0x33 itr1@0x33
    msg 0: addr 0x33, read, len 1, emit STOP, buf 0x10
    msg 1: addr 0x33, read, len 1, ignore NACK, toggle read/write bit, buf 0x10

If no optional flag is set, the output is unchanged.

Applied, thanks!