Skip to contentSkip to conversation

staging: sm750fb: rename variables to avoid CamelCase

PATCH In review André Moreira 2 participants 14 messages Jun 23 – Jul 8

Subsystems (3)
lore
Share & tools
lore
#0 lore raw

PATCH 1/1 staging: sm750fb: rename variables to avoid CamelCase

Rename 'pvReg' to 'pv_reg' and 'setAllEngOff' to 'set_all_eng_off' throughout the driver to comply with the Linux kernel coding style.

---
 drivers/staging/sm750fb/sm750.c    |  6 +++---
 drivers/staging/sm750fb/sm750.h    |  4 ++--
 drivers/staging/sm750fb/sm750_hw.c | 12 ++++++------
 3 files changed, 11 insertions(+), 11 deletions(-)
drivers/staging/sm750fb/sm750.c +3 -3
index 89c811e0806c4..716a8935f58d1 100644
@@ -743,7 +743,7 @@ static int lynxfb_set_fbinfo(struct fb_info *info, int index)
 	 * must be set after crtc member initialized
 	 */
 	crtc->cursor.offset = crtc->o_screen + crtc->vidmem_size - 1024;
-	crtc->cursor.mmio = sm750_dev->pvReg +
+	crtc->cursor.mmio = sm750_dev->pv_reg +
 		0x800f0 + (int)crtc->channel * 0x140;
 
 	crtc->cursor.max_h = 64;
@@ -848,7 +848,7 @@ static void sm750fb_setup(struct sm750_dev *sm750_dev, char *src)
 	sm750_dev->init_parm.mem_clk = 0;
 	sm750_dev->init_parm.master_clk = 0;
 	sm750_dev->init_parm.power_mode = 0;
-	sm750_dev->init_parm.setAllEngOff = 0;
+	sm750_dev->init_parm.set_all_eng_off = 0;
 	sm750_dev->init_parm.reset_memory = 1;
 
 	/* defaultly turn g_hwcursor on for both view */
@@ -1047,7 +1047,7 @@ static void lynxfb_pci_remove(struct pci_dev *pdev)
 	sm750fb_framebuffer_release(sm750_dev);
 	arch_phys_wc_del(sm750_dev->mtrr.vram);
 
-	iounmap(sm750_dev->pvReg);
+	iounmap(sm750_dev->pv_reg);
 	iounmap(sm750_dev->vmem);
 	pci_release_region(pdev, 1);
 	kfree(g_settings);
drivers/staging/sm750fb/sm750.h +2 -2
index d2c522e67f26a..e8885133da2e1 100644
@@ -44,7 +44,7 @@ struct init_status {
 	ushort chip_clk;
 	ushort mem_clk;
 	ushort master_clk;
-	ushort setAllEngOff;
+	ushort set_all_eng_off;
 	ushort reset_memory;
 };
 
@@ -97,7 +97,7 @@ struct sm750_dev {
 	unsigned long vidreg_start;
 	__u32 vidmem_size;
 	__u32 vidreg_size;
-	void __iomem *pvReg;
+	void __iomem *pv_reg;
 	unsigned char __iomem *vmem;
 	/* locks*/
 	spinlock_t slock;
drivers/staging/sm750fb/sm750_hw.c +6 -6
index 34a837fb4b649..95f797e5776a2 100644
@@ -23,18 +23,18 @@ int hw_sm750_map(struct sm750_dev *sm750_dev, struct pci_dev *pdev)
 	}
 
 	/* now map mmio and vidmem */
-	sm750_dev->pvReg =
+	sm750_dev->pv_reg =
 		ioremap(sm750_dev->vidreg_start, sm750_dev->vidreg_size);
-	if (!sm750_dev->pvReg) {
+	if (!sm750_dev->pv_reg) {
 		dev_err(&pdev->dev, "mmio failed\n");
 		ret = -EFAULT;
 		goto err_release_region;
 	}
 
-	sm750_dev->accel.dpr_base = sm750_dev->pvReg + DE_BASE_ADDR_TYPE1;
-	sm750_dev->accel.dp_port_base = sm750_dev->pvReg + DE_PORT_ADDR_TYPE1;
+	sm750_dev->accel.dpr_base = sm750_dev->pv_reg + DE_BASE_ADDR_TYPE1;
+	sm750_dev->accel.dp_port_base = sm750_dev->pv_reg + DE_PORT_ADDR_TYPE1;
 
-	mmio750 = sm750_dev->pvReg;
+	mmio750 = sm750_dev->pv_reg;
 	sm750_set_chip_type(sm750_dev->devid, sm750_dev->revid);
 
 	sm750_dev->vidmem_start = pci_resource_start(pdev, 0);
@@ -58,7 +58,7 @@ int hw_sm750_map(struct sm750_dev *sm750_dev, struct pci_dev *pdev)
 	return 0;
 
 err_unmap_reg:
-	iounmap(sm750_dev->pvReg);
+	iounmap(sm750_dev->pv_reg);
 err_release_region:
 	pci_release_region(pdev, 1);
 	return ret;
Signature · 1 line
2.43.0
maintainer
#1 lore raw
Quoted 15 lines · André Moreira

Rename 'pvReg' to 'pv_reg' and 'setAllEngOff' to 'set_all_eng_off' throughout the driver to comply with the Linux kernel coding style.

---
 drivers/staging/sm750fb/sm750.c    |  6 +++---
 drivers/staging/sm750fb/sm750.h    |  4 ++--
 drivers/staging/sm750fb/sm750_hw.c | 12 ++++++------
 3 files changed, 11 insertions(+), 11 deletions(-)
drivers/staging/sm750fb/sm750.c +0 -0
index 89c811e0806c4..716a8935f58d1 100644

drivers/staging/sm750fb/sm750.c static int lynxfb_set_fbinfo(struct fb_info *info, int index) · line 746

Quoted 5 lines
drivers/staging/sm750fb/sm750.c +1 -1
@@ -743,7 +743,7 @@ static int lynxfb_set_fbinfo(struct fb_info *info, int index)
 	 * must be set after crtc member initialized
 	 */
 	crtc->cursor.offset = crtc->o_screen + crtc->vidmem_size - 1024;
-	crtc->cursor.mmio = sm750_dev->pvReg +
+	crtc->cursor.mmio = sm750_dev->pv_reg +

This variable name is still in hungarian notation, which is not allowed in kernel variable names.

thanks,

greg k-h

#2 lore raw

PATCH v2 1/1 staging: sm750fb: rename variables to comply with kernel style

Rename 'pvReg' to 'regs' to remove Hungarian notation, and rename 'setAllEngOff' to 'set_all_eng_off' to avoid CamelCase throughout the driver. This complies with the Linux kernel coding style.

---
 drivers/staging/sm750fb/sm750.c    |  6 +++---
 drivers/staging/sm750fb/sm750.h    |  4 ++--
 drivers/staging/sm750fb/sm750_hw.c | 12 ++++++------
 3 files changed, 11 insertions(+), 11 deletions(-)
drivers/staging/sm750fb/sm750.c +3 -3
index 89c811e0806c4..7cd9cb0b3498c 100644
@@ -743,7 +743,7 @@ static int lynxfb_set_fbinfo(struct fb_info *info, int index)
 	 * must be set after crtc member initialized
 	 */
 	crtc->cursor.offset = crtc->o_screen + crtc->vidmem_size - 1024;
-	crtc->cursor.mmio = sm750_dev->pvReg +
+	crtc->cursor.mmio = sm750_dev->regs +
 		0x800f0 + (int)crtc->channel * 0x140;
 
 	crtc->cursor.max_h = 64;
@@ -848,7 +848,7 @@ static void sm750fb_setup(struct sm750_dev *sm750_dev, char *src)
 	sm750_dev->init_parm.mem_clk = 0;
 	sm750_dev->init_parm.master_clk = 0;
 	sm750_dev->init_parm.power_mode = 0;
-	sm750_dev->init_parm.setAllEngOff = 0;
+	sm750_dev->init_parm.set_all_eng_off = 0;
 	sm750_dev->init_parm.reset_memory = 1;
 
 	/* defaultly turn g_hwcursor on for both view */
@@ -1047,7 +1047,7 @@ static void lynxfb_pci_remove(struct pci_dev *pdev)
 	sm750fb_framebuffer_release(sm750_dev);
 	arch_phys_wc_del(sm750_dev->mtrr.vram);
 
-	iounmap(sm750_dev->pvReg);
+	iounmap(sm750_dev->regs);
 	iounmap(sm750_dev->vmem);
 	pci_release_region(pdev, 1);
 	kfree(g_settings);
drivers/staging/sm750fb/sm750.h +2 -2
index d2c522e67f26a..32f9a9ac7be73 100644
@@ -44,7 +44,7 @@ struct init_status {
 	ushort chip_clk;
 	ushort mem_clk;
 	ushort master_clk;
-	ushort setAllEngOff;
+	ushort set_all_eng_off;
 	ushort reset_memory;
 };
 
@@ -97,7 +97,7 @@ struct sm750_dev {
 	unsigned long vidreg_start;
 	__u32 vidmem_size;
 	__u32 vidreg_size;
-	void __iomem *pvReg;
+	void __iomem *regs;
 	unsigned char __iomem *vmem;
 	/* locks*/
 	spinlock_t slock;
drivers/staging/sm750fb/sm750_hw.c +6 -6
index 34a837fb4b649..c5a495bb5ac57 100644
@@ -23,18 +23,18 @@ int hw_sm750_map(struct sm750_dev *sm750_dev, struct pci_dev *pdev)
 	}
 
 	/* now map mmio and vidmem */
-	sm750_dev->pvReg =
+	sm750_dev->regs =
 		ioremap(sm750_dev->vidreg_start, sm750_dev->vidreg_size);
-	if (!sm750_dev->pvReg) {
+	if (!sm750_dev->regs) {
 		dev_err(&pdev->dev, "mmio failed\n");
 		ret = -EFAULT;
 		goto err_release_region;
 	}
 
-	sm750_dev->accel.dpr_base = sm750_dev->pvReg + DE_BASE_ADDR_TYPE1;
-	sm750_dev->accel.dp_port_base = sm750_dev->pvReg + DE_PORT_ADDR_TYPE1;
+	sm750_dev->accel.dpr_base = sm750_dev->regs + DE_BASE_ADDR_TYPE1;
+	sm750_dev->accel.dp_port_base = sm750_dev->regs + DE_PORT_ADDR_TYPE1;
 
-	mmio750 = sm750_dev->pvReg;
+	mmio750 = sm750_dev->regs;
 	sm750_set_chip_type(sm750_dev->devid, sm750_dev->revid);
 
 	sm750_dev->vidmem_start = pci_resource_start(pdev, 0);
@@ -58,7 +58,7 @@ int hw_sm750_map(struct sm750_dev *sm750_dev, struct pci_dev *pdev)
 	return 0;
 
 err_unmap_reg:
-	iounmap(sm750_dev->pvReg);
+	iounmap(sm750_dev->regs);
 err_release_region:
 	pci_release_region(pdev, 1);
 	return ret;
Signature · 1 line
2.43.0
#3 lore raw

Re: [PATCH v2] staging: sm750fb: rename variables to comply with kernel style

Quoted 105 lines · André Moreira

Rename 'pvReg' to 'regs' to remove Hungarian notation, and rename 'setAllEngOff' to 'set_all_eng_off' to avoid CamelCase throughout the driver. This complies with the Linux kernel coding style.

---
 drivers/staging/sm750fb/sm750.c    |  6 +++---
 drivers/staging/sm750fb/sm750.h    |  4 ++--
 drivers/staging/sm750fb/sm750_hw.c | 12 ++++++------
 3 files changed, 11 insertions(+), 11 deletions(-)
drivers/staging/sm750fb/sm750.c +3 -3
index 89c811e0806c4..7cd9cb0b3498c 100644
@@ -743,7 +743,7 @@ static int lynxfb_set_fbinfo(struct fb_info *info, int index)
 	 * must be set after crtc member initialized
 	 */
 	crtc->cursor.offset = crtc->o_screen + crtc->vidmem_size - 1024;
-	crtc->cursor.mmio = sm750_dev->pvReg +
+	crtc->cursor.mmio = sm750_dev->regs +
 		0x800f0 + (int)crtc->channel * 0x140;
 
 	crtc->cursor.max_h = 64;
@@ -848,7 +848,7 @@ static void sm750fb_setup(struct sm750_dev *sm750_dev, char *src)
 	sm750_dev->init_parm.mem_clk = 0;
 	sm750_dev->init_parm.master_clk = 0;
 	sm750_dev->init_parm.power_mode = 0;
-	sm750_dev->init_parm.setAllEngOff = 0;
+	sm750_dev->init_parm.set_all_eng_off = 0;
 	sm750_dev->init_parm.reset_memory = 1;
 
 	/* defaultly turn g_hwcursor on for both view */
@@ -1047,7 +1047,7 @@ static void lynxfb_pci_remove(struct pci_dev *pdev)
 	sm750fb_framebuffer_release(sm750_dev);
 	arch_phys_wc_del(sm750_dev->mtrr.vram);
 
-	iounmap(sm750_dev->pvReg);
+	iounmap(sm750_dev->regs);
 	iounmap(sm750_dev->vmem);
 	pci_release_region(pdev, 1);
 	kfree(g_settings);
drivers/staging/sm750fb/sm750.h +2 -2
index d2c522e67f26a..32f9a9ac7be73 100644
@@ -44,7 +44,7 @@ struct init_status {
 	ushort chip_clk;
 	ushort mem_clk;
 	ushort master_clk;
-	ushort setAllEngOff;
+	ushort set_all_eng_off;
 	ushort reset_memory;
 };
 
@@ -97,7 +97,7 @@ struct sm750_dev {
 	unsigned long vidreg_start;
 	__u32 vidmem_size;
 	__u32 vidreg_size;
-	void __iomem *pvReg;
+	void __iomem *regs;
 	unsigned char __iomem *vmem;
 	/* locks*/
 	spinlock_t slock;
drivers/staging/sm750fb/sm750_hw.c +6 -6
index 34a837fb4b649..c5a495bb5ac57 100644
@@ -23,18 +23,18 @@ int hw_sm750_map(struct sm750_dev *sm750_dev, struct pci_dev *pdev)
 	}
 
 	/* now map mmio and vidmem */
-	sm750_dev->pvReg =
+	sm750_dev->regs =
 		ioremap(sm750_dev->vidreg_start, sm750_dev->vidreg_size);
-	if (!sm750_dev->pvReg) {
+	if (!sm750_dev->regs) {
 		dev_err(&pdev->dev, "mmio failed\n");
 		ret = -EFAULT;
 		goto err_release_region;
 	}
 
-	sm750_dev->accel.dpr_base = sm750_dev->pvReg + DE_BASE_ADDR_TYPE1;
-	sm750_dev->accel.dp_port_base = sm750_dev->pvReg + DE_PORT_ADDR_TYPE1;
+	sm750_dev->accel.dpr_base = sm750_dev->regs + DE_BASE_ADDR_TYPE1;
+	sm750_dev->accel.dp_port_base = sm750_dev->regs + DE_PORT_ADDR_TYPE1;
 
-	mmio750 = sm750_dev->pvReg;
+	mmio750 = sm750_dev->regs;
 	sm750_set_chip_type(sm750_dev->devid, sm750_dev->revid);
 
 	sm750_dev->vidmem_start = pci_resource_start(pdev, 0);
@@ -58,7 +58,7 @@ int hw_sm750_map(struct sm750_dev *sm750_dev, struct pci_dev *pdev)
 	return 0;
 
 err_unmap_reg:
-	iounmap(sm750_dev->pvReg);
+	iounmap(sm750_dev->regs);
 err_release_region:
 	pci_release_region(pdev, 1);
 	return ret;
Signature · 1 line
2.43.0

Hi,

This is the friendly patch-bot of Greg Kroah-Hartman. You have sent him a patch that has triggered this response. He used to manually respond to these common problems, but in order to save his sanity (he kept writing the same thing over and over, yet to different people), I was created. Hopefully you will not take offence and will fix the problem in your patch and resubmit it so that it can be accepted into the Linux kernel tree.

You are receiving this message because of the following common error(s) as indicated below:

- This looks like a new version of a previously submitted patch, but you did not list below the --- line any changes from the previous version. Please read the section entitled "The canonical patch format" in the kernel file, Documentation/process/submitting-patches.rst for what needs to be done here to properly describe this.

If you wish to discuss this problem further, or you have questions about how to resolve this issue, please feel free to respond to this email and Greg will reply once he has dug out from the pending patches received from other developers.

thanks,

greg k-h's patch email bot

#4 lore raw

PATCH v3 1/1 staging: sm750fb: rename variables to comply with kernel style

In reply to Greg KH

Rename 'pvReg' to 'regs' to remove Hungarian notation, and rename 'setAllEngOff' to 'set_all_eng_off' to avoid CamelCase throughout the driver.

---
Changes in v3:
- Added changelog history to satisfy the bot.

Changes in v2:
- Renamed 'pv_reg' to 'regs' to completely remove Hungarian notation, based on Greg KH's feedback.

 drivers/staging/sm750fb/sm750.c    |  6 +++---
 drivers/staging/sm750fb/sm750.h    |  4 ++--
 drivers/staging/sm750fb/sm750_hw.c | 12 ++++++------
 3 files changed, 11 insertions(+), 11 deletions(-)
drivers/staging/sm750fb/sm750.c +3 -3
index 89c811e0806c4..7cd9cb0b3498c 100644
@@ -743,7 +743,7 @@ static int lynxfb_set_fbinfo(struct fb_info *info, int index)
 	 * must be set after crtc member initialized
 	 */
 	crtc->cursor.offset = crtc->o_screen + crtc->vidmem_size - 1024;
-	crtc->cursor.mmio = sm750_dev->pvReg +
+	crtc->cursor.mmio = sm750_dev->regs +
 		0x800f0 + (int)crtc->channel * 0x140;
 
 	crtc->cursor.max_h = 64;
@@ -848,7 +848,7 @@ static void sm750fb_setup(struct sm750_dev *sm750_dev, char *src)
 	sm750_dev->init_parm.mem_clk = 0;
 	sm750_dev->init_parm.master_clk = 0;
 	sm750_dev->init_parm.power_mode = 0;
-	sm750_dev->init_parm.setAllEngOff = 0;
+	sm750_dev->init_parm.set_all_eng_off = 0;
 	sm750_dev->init_parm.reset_memory = 1;
 
 	/* defaultly turn g_hwcursor on for both view */
@@ -1047,7 +1047,7 @@ static void lynxfb_pci_remove(struct pci_dev *pdev)
 	sm750fb_framebuffer_release(sm750_dev);
 	arch_phys_wc_del(sm750_dev->mtrr.vram);
 
-	iounmap(sm750_dev->pvReg);
+	iounmap(sm750_dev->regs);
 	iounmap(sm750_dev->vmem);
 	pci_release_region(pdev, 1);
 	kfree(g_settings);
drivers/staging/sm750fb/sm750.h +2 -2
index d2c522e67f26a..32f9a9ac7be73 100644
@@ -44,7 +44,7 @@ struct init_status {
 	ushort chip_clk;
 	ushort mem_clk;
 	ushort master_clk;
-	ushort setAllEngOff;
+	ushort set_all_eng_off;
 	ushort reset_memory;
 };
 
@@ -97,7 +97,7 @@ struct sm750_dev {
 	unsigned long vidreg_start;
 	__u32 vidmem_size;
 	__u32 vidreg_size;
-	void __iomem *pvReg;
+	void __iomem *regs;
 	unsigned char __iomem *vmem;
 	/* locks*/
 	spinlock_t slock;
drivers/staging/sm750fb/sm750_hw.c +6 -6
index 34a837fb4b649..c5a495bb5ac57 100644
@@ -23,18 +23,18 @@ int hw_sm750_map(struct sm750_dev *sm750_dev, struct pci_dev *pdev)
 	}
 
 	/* now map mmio and vidmem */
-	sm750_dev->pvReg =
+	sm750_dev->regs =
 		ioremap(sm750_dev->vidreg_start, sm750_dev->vidreg_size);
-	if (!sm750_dev->pvReg) {
+	if (!sm750_dev->regs) {
 		dev_err(&pdev->dev, "mmio failed\n");
 		ret = -EFAULT;
 		goto err_release_region;
 	}
 
-	sm750_dev->accel.dpr_base = sm750_dev->pvReg + DE_BASE_ADDR_TYPE1;
-	sm750_dev->accel.dp_port_base = sm750_dev->pvReg + DE_PORT_ADDR_TYPE1;
+	sm750_dev->accel.dpr_base = sm750_dev->regs + DE_BASE_ADDR_TYPE1;
+	sm750_dev->accel.dp_port_base = sm750_dev->regs + DE_PORT_ADDR_TYPE1;
 
-	mmio750 = sm750_dev->pvReg;
+	mmio750 = sm750_dev->regs;
 	sm750_set_chip_type(sm750_dev->devid, sm750_dev->revid);
 
 	sm750_dev->vidmem_start = pci_resource_start(pdev, 0);
@@ -58,7 +58,7 @@ int hw_sm750_map(struct sm750_dev *sm750_dev, struct pci_dev *pdev)
 	return 0;
 
 err_unmap_reg:
-	iounmap(sm750_dev->pvReg);
+	iounmap(sm750_dev->regs);
 err_release_region:
 	pci_release_region(pdev, 1);
 	return ret;
Signature · 1 line
2.43.0
#5 lore raw

Re: [PATCH v3] staging: sm750fb: rename variables to comply with kernel style

Quoted 11 lines · André Moreira

Rename 'pvReg' to 'regs' to remove Hungarian notation, and rename 'setAllEngOff' to 'set_all_eng_off' to avoid CamelCase throughout the driver.

---
Changes in v3:
- Added changelog history to satisfy the bot.

Changes in v2:
- Renamed 'pv_reg' to 'regs' to completely remove Hungarian notation, based on Greg KH's feedback.

Does not apply to the staging-testing branch :(

#6 lore raw

PATCH v4 1/1 staging: sm750fb: rename variables to comply with kernel style

In reply to Greg KH

Rename 'setAllEngOff' to 'set_all_eng_off' within the 'init_status' struct to avoid CamelCase and comply with the Linux kernel coding style.

---
v4:
- Drop register renames 'pvReg' to 'regs' as they were merged via another upstream patch.
- Keep only the 'init_status' CamelCase cleanup.

drivers/staging/sm750fb/sm750.h | 9 +++++++++

 1 file changed, 9 insertions(+)
drivers/staging/sm750fb/sm750.h +9 -0
index 0324778768cbc..3a1bd38ab347a 100644
@@ -39,6 +39,15 @@ enum sm750_path {
 	sm750_pnc = 3,	/* panel and crt */
 };
 
+struct init_status {
+	ushort power_mode;
+	/* below three clocks are in unit of MHZ*/
+	ushort chip_clk;
+	ushort mem_clk;
+	ushort master_clk;
+	ushort set_all_eng_off;
+	ushort reset_memory;
+};
 
 struct lynx_accel {
 	/* base virtual address of DPR registers */
Signature · 1 line
2.43.0
#7 lore raw

Re: [PATCH v4] staging: sm750fb: rename variables to comply with kernel style

Please disregard this v4 patch.

Upon closer inspection, the 'init_status' struct has been completely removed from the driver by a previous upstream commit, making this cleanup obsolete. Sorry for the noise.

Em ter., 7 de jul. de 2026 às 10:17, André Moreira <[email protected]> escreveu:

Quoted 36 lines

Rename 'setAllEngOff' to 'set_all_eng_off' within the 'init_status' struct to avoid CamelCase and comply with the Linux kernel coding style.

---
v4:
- Drop register renames 'pvReg' to 'regs' as they were merged via another upstream patch.
- Keep only the 'init_status' CamelCase cleanup.

drivers/staging/sm750fb/sm750.h | 9 +++++++++

 1 file changed, 9 insertions(+)
drivers/staging/sm750fb/sm750.h +9 -1
index 0324778768cbc..3a1bd38ab347a 100644
@@ -39,6 +39,15 @@ enum sm750_path {
        sm750_pnc = 3,  /* panel and crt */
 };
 
+struct init_status {
+       ushort power_mode;
+       /* below three clocks are in unit of MHZ*/
+       ushort chip_clk;
+       ushort mem_clk;
+       ushort master_clk;
+       ushort set_all_eng_off;
+       ushort reset_memory;
+};
 
 struct lynx_accel {
        /* base virtual address of DPR registers */
--

2.43.0

#8 lore raw

Re: [PATCH v4] staging: sm750fb: rename variables to comply with kernel style

In reply to André Moreira
Quoted 20 lines · André Moreira

Rename 'setAllEngOff' to 'set_all_eng_off' within the 'init_status' struct to avoid CamelCase and comply with the Linux kernel coding style.

---
v4:
- Drop register renames 'pvReg' to 'regs' as they were merged via another upstream patch.
- Keep only the 'init_status' CamelCase cleanup.

drivers/staging/sm750fb/sm750.h | 9 +++++++++

 1 file changed, 9 insertions(+)
drivers/staging/sm750fb/sm750.h +0 -0
index 0324778768cbc..3a1bd38ab347a 100644
@@ -39,6 +39,15 @@ enum sm750_path {
 	sm750_pnc = 3,	/* panel and crt */
 };
 

drivers/staging/sm750fb/sm750.h enum sm750_path { · line 51

Quoted 10 lines
drivers/staging/sm750fb/sm750.h +9 -0
+struct init_status {
+	ushort power_mode;
+	/* below three clocks are in unit of MHZ*/
+	ushort chip_clk;
+	ushort mem_clk;
+	ushort master_clk;
+	ushort set_all_eng_off;
+	ushort reset_memory;
+};
 

The description of this patch seems to have nothing to do with the diff itself :(

Did something go wrong?

#9 lore raw

PATCH v5 1/1 staging: sm750fb: rename variables to comply with kernel style

In reply to Greg KH

Rename 'setAllEngOff' to 'set_all_eng_off' within the 'init_status' struct to avoid CamelCase and comply with the Linux kernel coding style. Also update its usage within sm750.c to prevent compilation errors.

---
v5:
- Fix broken diff from v4 that was accidentally recreating the entire struct.
- Update the variable usage inside drivers/staging/sm750fb/sm750.c to prevent compilation errors.

v4:
- Drop register renames 'pvReg' to 'regs' as they were merged via another upstream patch.
- Keep only the 'init_status' CamelCase cleanup.

v3:
- Added changelog history to satisfy the bot.

v2:
- Renamed 'pv_reg' to 'regs' to completely remove Hungarian notation, based on Greg KH's feedback.

 drivers/staging/sm750fb/sm750.c | 2 +-
 drivers/staging/sm750fb/sm750.h | 2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)
drivers/staging/sm750fb/sm750.c +1 -1
index 89c811e0806c4..00c293430a7d5 100644
@@ -848,7 +848,7 @@ static void sm750fb_setup(struct sm750_dev *sm750_dev, char *src)
 	sm750_dev->init_parm.mem_clk = 0;
 	sm750_dev->init_parm.master_clk = 0;
 	sm750_dev->init_parm.power_mode = 0;
-	sm750_dev->init_parm.setAllEngOff = 0;
+	sm750_dev->init_parm.set_all_eng_off = 0;
 	sm750_dev->init_parm.reset_memory = 1;
 
 	/* defaultly turn g_hwcursor on for both view */
drivers/staging/sm750fb/sm750.h +1 -1
index d2c522e67f26a..589ae51444f81 100644
@@ -44,7 +44,7 @@ struct init_status {
 	ushort chip_clk;
 	ushort mem_clk;
 	ushort master_clk;
-	ushort setAllEngOff;
+	ushort set_all_eng_off;
 	ushort reset_memory;
 };
 
Signature · 1 line
2.43.0
#10 lore raw

Re: [PATCH v5] staging: sm750fb: rename variables to comply with kernel style

Quoted 43 lines · André Moreira

Rename 'setAllEngOff' to 'set_all_eng_off' within the 'init_status' struct to avoid CamelCase and comply with the Linux kernel coding style. Also update its usage within sm750.c to prevent compilation errors.

---
v5:
- Fix broken diff from v4 that was accidentally recreating the entire struct.
- Update the variable usage inside drivers/staging/sm750fb/sm750.c to prevent compilation errors.

v4:
- Drop register renames 'pvReg' to 'regs' as they were merged via another upstream patch.
- Keep only the 'init_status' CamelCase cleanup.

v3:
- Added changelog history to satisfy the bot.

v2:
- Renamed 'pv_reg' to 'regs' to completely remove Hungarian notation, based on Greg KH's feedback.

 drivers/staging/sm750fb/sm750.c | 2 +-
 drivers/staging/sm750fb/sm750.h | 2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)
drivers/staging/sm750fb/sm750.c +1 -1
index 89c811e0806c4..00c293430a7d5 100644
@@ -848,7 +848,7 @@ static void sm750fb_setup(struct sm750_dev *sm750_dev, char *src)
 	sm750_dev->init_parm.mem_clk = 0;
 	sm750_dev->init_parm.master_clk = 0;
 	sm750_dev->init_parm.power_mode = 0;
-	sm750_dev->init_parm.setAllEngOff = 0;
+	sm750_dev->init_parm.set_all_eng_off = 0;
 	sm750_dev->init_parm.reset_memory = 1;
 
 	/* defaultly turn g_hwcursor on for both view */
drivers/staging/sm750fb/sm750.h +0 -0
index d2c522e67f26a..589ae51444f81 100644

drivers/staging/sm750fb/sm750.h struct init_status { · line 50

Quoted 8 lines
drivers/staging/sm750fb/sm750.h +1 -1
@@ -44,7 +44,7 @@ struct init_status {
 	ushort chip_clk;
 	ushort mem_clk;
 	ushort master_clk;
-	ushort setAllEngOff;
+	ushort set_all_eng_off;
 	ushort reset_memory;
 };
 

If this variable is only set, and never read, why is it here at all? Why not just remove it entirely?

thanks,

greg k-h

#11 lore raw

PATCH v6 1/1 staging: sm750fb: Remove unused variable 'setAllEngOff'

In reply to Greg KH

The variable 'setAllEngOff' within the 'init_status' struct is only set to zero during setup but its value is never read anywhere else in the driver. Remove it entirely to clean up the code.

---
v6:
- Change patch approach from renaming CamelCase to entirely removing the unused 'setAllEngOff' variable, based on Greg KH's feedback.

v5:
- Fix broken diff from v4 that was accidentally recreating the entire struct.
- Update the variable usage inside drivers/staging/sm750fb/sm750.c to prevent compilation errors.

v4:
- Drop register renames 'pvReg' to 'regs' as they were merged via another upstream patch.
- Keep only the 'init_status' CamelCase cleanup.

v3:
- Added changelog history to satisfy the bot.

v2:
- Renamed 'pv_reg' to 'regs' to completely remove Hungarian notation, based on Greg KH's feedback.

 drivers/staging/sm750fb/sm750.c | 1 -
 drivers/staging/sm750fb/sm750.h | 1 -
 2 files changed, 2 deletions(-)
drivers/staging/sm750fb/sm750.c +0 -1
index 89c811e0806c4..f676f1716cf89 100644
@@ -848,7 +848,6 @@ static void sm750fb_setup(struct sm750_dev *sm750_dev, char *src)
 	sm750_dev->init_parm.mem_clk = 0;
 	sm750_dev->init_parm.master_clk = 0;
 	sm750_dev->init_parm.power_mode = 0;
-	sm750_dev->init_parm.setAllEngOff = 0;
 	sm750_dev->init_parm.reset_memory = 1;
 
 	/* defaultly turn g_hwcursor on for both view */
drivers/staging/sm750fb/sm750.h +0 -1
index d2c522e67f26a..e7b8626cb876e 100644
@@ -44,7 +44,6 @@ struct init_status {
 	ushort chip_clk;
 	ushort mem_clk;
 	ushort master_clk;
-	ushort setAllEngOff;
 	ushort reset_memory;
 };
 
Signature · 1 line
2.43.0
#12 lore raw

Re: [PATCH v6] staging: sm750fb: Remove unused variable 'setAllEngOff'

Quoted 9 lines · André Moreira

The variable 'setAllEngOff' within the 'init_status' struct is only set to zero during setup but its value is never read anywhere else in the driver. Remove it entirely to clean up the code.

---
v6:
- Change patch approach from renaming CamelCase to entirely removing the unused 'setAllEngOff' variable, based on Greg KH's feedback.

This doesn't apply to my tree at all. Can you rebase against the staging-testing branch and resend?

thanks,

greg k-h

#13 lore raw

Re: [PATCH v6] staging: sm750fb: Remove unused variable 'setAllEngOff'

Hi Greg,

Please disregard this patch. Upon rebasing against staging-testing, I noticed that 'setAllEngOff' was recently renamed to 'set_all_eng_off' and its value is now actually being read/used inside drivers/staging/sm750fb/ddk750_chip.c.

Thank you for your time!

Regards,
André

Em qua., 8 de jul. de 2026 às 09:01, Greg Kroah-Hartman <[email protected]> escreveu:

Quoted 18 lines · André Moreira
Quoted 9 lines

The variable 'setAllEngOff' within the 'init_status' struct is only set to zero during setup but its value is never read anywhere else in the driver. Remove it entirely to clean up the code.

---
v6:
- Change patch approach from renaming CamelCase to entirely removing the unused 'setAllEngOff' variable, based on Greg KH's feedback.

This doesn't apply to my tree at all. Can you rebase against the staging-testing branch and resend?

thanks,

greg k-h