drm/msm/dp: Disable stream clock after video-ready timeout
PATCH 1/1 drm/msm/dp: Disable stream clock after video-ready timeout
msm_dp_ctrl_on_stream() enables the stream pixel clock before waiting for video readiness. If that wait times out, it returns without disabling the clock or clearing stream_clks_on.
Route the timeout path through cleanup and disable the clock only if this call enabled it.
--- drivers/gpu/drm/msm/dp/dp_ctrl.c | 8 +++++++- 1 file changed, 7 insertions(+), 1 deletion(-)
drivers/gpu/drm/msm/dp/dp_ctrl.c +7 -1
@@ -2469,6 +2469,7 @@ int msm_dp_ctrl_on_stream(struct msm_dp_ctrl *msm_dp_ctrl, bool force_link_train {int ret =0 ;bool mainlink_ready = false; +bool stream_clk_enabled = false;struct msm_dp_ctrl_private *ctrl;unsigned long pixel_rate;unsigned long pixel_rate_orig;
@@ -2514,6 +2515,7 @@ int msm_dp_ctrl_on_stream(struct msm_dp_ctrl *msm_dp_ctrl, bool force_link_train goto end; } ctrl->stream_clks_on = true; + stream_clk_enabled = true; }if (force_link_train || !msm_dp_ctrl_channel_eq_ok (ctrl))
@@ -2543,13 +2545,17 @@ int msm_dp_ctrl_on_stream(struct msm_dp_ctrl *msm_dp_ctrl, bool force_link_train ret =msm_dp_ctrl_wait4video_ready (ctrl);if (ret) -return ret; + goto end; mainlink_ready =msm_dp_ctrl_mainlink_ready (ctrl);drm_dbg_dp (ctrl->drm_dev,"mainlink %s\n" , mainlink_ready ?"READY" :"NOT READY" ); end: +if (stream_clk_enabled && ret) { +clk_disable_unprepare (ctrl->pixel_clk); + ctrl->stream_clks_on = false; + }return ret; }
Signature · 1 line
2.43.0
[email protected]
AI reviewThank you for your contribution! Sashiko AI review found 1 potential issue(s) to consider: - [High] Disabling the pixel clock while the DP controller is actively in the SEND_VIDEO state violates the…
Thank you for your contribution! Sashiko AI review found 1 potential issue(s) to consider:
- [High] Disabling the pixel clock while the DP controller is actively in the SEND_VIDEO state violates the teardown sequence and can lock up the hardware. --
--- Patch [1]: [PATCH v1] drm/msm/dp: Disable stream clock after video-ready timeout --- commit d51f59f75198361a5116081d3f135fd586dbcb66
Author: Yuho Choi <[email protected]>
drm/msm/dp: Disable stream clock after video-ready timeout
This commit routes the video-ready timeout path in msm_dp_ctrl_on_stream() through a cleanup path. It disables the stream pixel clock and clears the stream_clks_on flag if the clock was enabled during the call.
Quoted 4 lines
drivers/gpu/drm/msm/dp/dp_ctrl.c +0
-0
[ ... ]
Quoted 6 lines
drivers/gpu/drm/msm/dp/dp_ctrl.c +1
-1@@ -2543,13 +2545,17 @@ int msm_dp_ctrl_on_stream(struct msm_dp_ctrl *msm_dp_ctrl, bool force_link_train ret =msm_dp_ctrl_wait4video_ready (ctrl);if (ret) -return ret; + goto end;
drivers/gpu/drm/msm/dp/dp_ctrl.c int msm_dp_ctrl_on_stream(struct msm_dp_ctrl *msm_dp_ctrl, bool force_link_train · line 2558
Quoted 10 lines
drivers/gpu/drm/msm/dp/dp_ctrl.c +4
-0mainlink_ready =msm_dp_ctrl_mainlink_ready (ctrl);drm_dbg_dp (ctrl->drm_dev,"mainlink %s\n" , mainlink_ready ?"READY" :"NOT READY" ); end: +if (stream_clk_enabled && ret) { +clk_disable_unprepare (ctrl->pixel_clk); + ctrl->stream_clks_on = false; + }
[Severity: High]
Does this error path leave the DP controller in an active state without reverting it before disabling the pixel clock?
Earlier in this function, the controller is programmed to send video:
msm_dp_write_link(ctrl, REG_DP_STATE_CTRL, DP_STATE_CTRL_SEND_VIDEO); ret = msm_dp_ctrl_wait4video_ready(ctrl);
If wait4video_ready times out, the code jumps to the end label and disables the pixel clock. However, if the caller ignores this failure and DRM later disables the bridge, the teardown sequence will invoke msm_dp_ctrl_push_idle().
Since the controller was left in DP_STATE_CTRL_SEND_VIDEO but its pixel clock is now disabled, could writing DP_STATE_CTRL_PUSH_IDLE cause a timeout or wedge the hardware because it cannot process the state transition without the clock?
Quoted 2 lines
drivers/gpu/drm/msm/dp/dp_ctrl.c +0
-0return ret; }
Signature · 1 line
Sashiko AI review · https://sashiko.dev/#/patchset/[email protected]?part=1
Quoted 3 lines · On Tue, Jul 07, 2026 at 06:05:53PM +0000, [email protected] wrote:
Thank you for your contribution! Sashiko AI review found 1 potential issue(s) to consider:
- [High] Disabling the pixel clock while the DP controller is actively in theSEND_VIDEOstate violates the teardown sequence and can lock up the hardware. --
Could you please comment on this Sashiko comment?
Quoted 57 lines
--- Patch [1]: [PATCH v1] drm/msm/dp: Disable stream clock after video-ready timeout --- commit
d51f59f75198361a5116081d3f135fd586dbcb66
Author: Yuho Choi <[email protected]>drm/msm/dp: Disable stream clock after video-ready timeout
This commit routes the video-ready timeout path in
msm_dp_ctrl_on_stream()through a cleanup path. It disables the stream pixel clock and clears thestream_clks_onflag if the clock was enabled during the call.Quoted 4 lines
drivers/gpu/drm/msm/dp/dp_ctrl.c +0
-0[ ... ]
Quoted 6 lines
drivers/gpu/drm/msm/dp/dp_ctrl.c +1
-1@@ -2543,13 +2545,17 @@ int msm_dp_ctrl_on_stream(struct msm_dp_ctrl *msm_dp_ctrl, bool force_link_train ret =msm_dp_ctrl_wait4video_ready (ctrl);if (ret) -return ret; + goto end;drivers/gpu/drm/msm/dp/dp_ctrl.c int msm_dp_ctrl_on_stream(struct msm_dp_ctrl *msm_dp_ctrl, bool force_link_train · line 2558
Quoted 10 lines
drivers/gpu/drm/msm/dp/dp_ctrl.c +4
-0mainlink_ready =msm_dp_ctrl_mainlink_ready (ctrl);drm_dbg_dp (ctrl->drm_dev,"mainlink %s\n" , mainlink_ready ?"READY" :"NOT READY" ); end: +if (stream_clk_enabled && ret) { +clk_disable_unprepare (ctrl->pixel_clk); + ctrl->stream_clks_on = false; + }[Severity: High]
Does this error path leave the DP controller in an active state without reverting it before disabling the pixel clock?Earlier in this function, the controller is programmed to send video:
msm_dp_write_link(ctrl, REG_DP_STATE_CTRL, DP_STATE_CTRL_SEND_VIDEO); ret = msm_dp_ctrl_wait4video_ready(ctrl);If
wait4video_readytimes out, the code jumps to the end label and disables the pixel clock. However, if the caller ignores this failure and DRM later disables the bridge, the teardown sequence will invokemsm_dp_ctrl_push_idle().Since the controller was left in
DP_STATE_CTRL_SEND_VIDEObut its pixel clock is now disabled, could writingDP_STATE_CTRL_PUSH_IDLEcause a timeout or wedge the hardware because it cannot process the state transition without the clock?Quoted 2 lines
drivers/gpu/drm/msm/dp/dp_ctrl.c +0
-0return ret; }Signature · 1 line
Sashiko AI review · https://sashiko.dev/#/patchset/[email protected]?part=1
Signature · 2 lines
With best wishes Dmitry
Quoted 7 lines · Dmitry Baryshkov
Quoted 3 lines · On Tue, Jul 07, 2026 at 06:05:53PM +0000, [email protected] wrote:
Thank you for your contribution! Sashiko AI review found 1 potential issue(s) to consider:
- [High] Disabling the pixel clock while the DP controller is actively in theSEND_VIDEOstate violates the teardown sequence and can lock up the hardware. --Could you please comment on this Sashiko comment?
Thanks, agreed. The posted patch disables the pixel clock before reverting the controller from SEND_VIDEO, and the bridge disable path may later issue PUSH_IDLE with the clock disabled. I will send the revised patch addressing the comment.
I appreciate your time for the review.
Thanks,
Yuho