serial: esp32: add driver for esp32 series chips
PATCH v3 1/1 serial: esp32: add driver for esp32 series chips
From: Honbo He <[email protected]>
Add a driver model serial driver for Espressif ESP32 UART controllers. The driver supports ESP32, ESP32-S3 and ESP32-S31 UART register variants, including baud-rate setup, FIFO access and basic port initialization.
Signed-off-by Honbo He <[email protected]>
Changes in v3:
- Add debug UART for early print output
--- drivers/serial/Kconfig | 15 ++ drivers/serial/Makefile | 1 + drivers/serial/serial_esp32.c | 367 ++++++++++++++++++++++++++++++++++ 3 files changed, 383 insertions(+) create mode 100644 drivers/serial/serial_esp32.c
drivers/serial/Kconfig +15 -0
@@ -276,6 +276,14 @@ config DEBUG_UART_ATMEL will need to provide parameters to make this work. The driver will be available until the real driver-model serial is running. +config DEBUG_UART_ESP32 + bool "Espressif ESP32 UART" + depends on ESP32_SERIAL + help + Select this to enable a debug UART using the ESP32 UART driver. You + will need to provide parameters to make this work. The driver will + be available until the real driver-model serial is running. + config DEBUG_UART_BCM6345 bool "BCM6345 UART" depends on BCM6345_SERIAL
@@ -1069,6 +1077,13 @@ config HTIF_CONSOLE console. The HTIF device is quite common in RISC-V emulators and RISC-V ISS so this driver allows using U-Boot on such platforms. +config ESP32_SERIAL + bool "Espressif ESP32 UART support" + depends on DM_SERIAL + help + Select this to enable UART support for Espressif ESP32 family + devices using the U-Boot driver model. + config SIFIVE_SERIAL bool "SiFive UART support" depends on DM_SERIAL
drivers/serial/Makefile +1 -0
@@ -22,6 +22,7 @@ obj-$(CONFIG_COREBOOT_SERIAL) += serial_coreboot.o obj-$(CONFIG_CORTINA_UART) += serial_cortina.o obj-$(CONFIG_DEBUG_SBI_CONSOLE) += serial_sbi.o obj-$(CONFIG_EFI_APP) += serial_efi.o +obj-$(CONFIG_ESP32_SERIAL) += serial_esp32.o obj-$(CONFIG_MCFUART) += serial_mcf.o obj-$(CONFIG_SYS_NS16550) += ns16550.o obj-$(CONFIG_S5P_SERIAL) += serial_s5p.o
drivers/serial/serial_esp32.c new file +367 -0
367 lines not on this page · raw message
Signature · 1 line
2.34.1
Quoted 8 lines · On Wed, 08 Jul 2026 20:54:06 +0800, [email protected] wrote:
Add a driver model serial driver for Espressif ESP32 UART controllers. The driver supports ESP32, ESP32-S3 and ESP32-S31 UART register variants, including baud-rate setup, FIFO access and basic port initialization.
Signed-off-by Honbo He <[email protected]>[...]
Applied to u-boot/main, thanks!
[1/1] serial: esp32: add driver for esp32 series chips
commit: 64ce0f86ab9ce931013195b68276770d8e02b40f
Signature · 1 line
Tom