Skip to contentSkip to conversation

bpf: add icmp_send kfunc

PATCH In review Mahe Tardy 4 participants 14 messages Jul 9 – Jul 10

Subsystems (6)
lore
Share & tools
lore

Mahe Tardy

author
#0 lore raw

v11 cover bpf: add icmp_send kfunc

Hello,

This is v11 of adding the icmp_send kfunc, as suggested during LSF/MM/BPF 2025[^1]. The goal is to allow cgroup_skb programs to actively reject east-west traffic, similarly to what is possible to do with netfilter reject target. Applications can receive early feedback that something went wrong during the TCP handshake.

The first step to implement this is using ICMP control messages, with the ICMP_DEST_UNREACH type with various code ICMP_NET_UNREACH, ICMP_HOST_UNREACH, ICMP_PROT_UNREACH, etc. This is easier to implement than a TCP RST reply and will already hint the client TCP stack to abort the connection and not retry extensively.

Note that this is different than the sock_destroy kfunc, that along calls tcp_abort and thus sends a reset, destroying the underlying socket.

Caveats of this kfunc design are that a program can call this function N times, thus send N ICMP unreach control messages and that the program can return from the BPF filter with pass leading to a potential confusing situation where the TCP connection was established while the client received ICMP_DEST_UNREACH messages.

v2 updates:
- fix a build error from a missing function call rename;
- avoid changing return line in bpf_kfunc_init;
- return SK_DROP from the kfunc (similarly to bpf_redirect);
- check the return value in the selftest.

v3 update:
- fix an undefined reference build error.

v4 updates:
- prevent the kfunc to be called recursively and add a test (thanks to Martin).
- do not fetch dst route when unnecessary (thanks to Martin).
- extend the test for IPv6 (thanks to Martin).
- use SK_DROP in examples and use non blocking sockets for testing (thanks to Martin).
- test when the kfunc returns -EINVAL (thanks to Jordan).
- add the kfunc to bpf_kfunc_set_skb as suggested by Alexei.
- guard the IPv4 parts with IS_ENABLED(CONFIG_INET).
- fix a wrong initial value for client_fd (thanks to Yonghong).
- add documentation to the kfunc.
- to Jordan: I couldn't include <linux/icmp.h> because of redefines from <network_helpers.h>.

v5 updates:
- kfunc name is now icmp_send and takes the control message type as parameter for future potential extension (daniel)
- drop the net patches to route packet since now the kfunc is limited to cgroup_skb and tc progs (daniel & martin)
- linearize skb headers (sashiko)
- zero SKB control block (sashiko)
- bind to port 0 instead of fixed port (sashiko)
- poll to wait for POLLERR event (sashiko)
- do not use ASSERT_EQ in CMSG_NXTHDR loop (sashiko)
- fix comment about byte order (sashiko)
- fix endianness IP address issue (sashiko)
- add forgotten cleanup_cgroup_environment (sashiko)
- let packets pass in recursion test (sashiko)
- clarify evaluation order for recursion test (sashiko)

v6 updates (all from sashiko):
- bring back the net patches to route packet since tc ingress needs it.
- rename the ip_route_reply helpers from fetch to fill.
- call pskb_network_may_pull on the cloned pkt.
- check explicitly that we received one and only one ICMP err ctrl msg.

v7 updates:
- use consume_skb on success path (stanislav)
- replace recursion protection with CPU_ARRAY by checking the nature of the sk (daniel, offline)
- use reverse xmas tree in read_icmp_errqueue (jordan)
- use ASSERT_OK_FD instead of ASSERT_GE whenever possible (jordan)
- add a test for tc (jordan)
- better filtering from host cgroup test progs (sashiko)

v8 updates:
- mostly a resend as it's been sitting as "New" in the queue for almost one month, fixed a few nits.
- on new bpf_icmp_send kfunc cgroup_skb test (patch 4/7):
- guard a close fd with fd >= 0 (jordan)
- use ASSERT_OK_FD instead of ASSERT_GE (jordan)
- fixed comment style (sashiko)
- on recursion test (patch 7/7):
- guard a close fd with fd >= 0 (jordan)
- fixed comments style (sashiko)
- filter bpf prog on pid and ICMP message types (sashiko)

v9 updates:
- first, there was a v8.5 that I discussed here[^2] with Emil Tsalapatis. I tried once again to make tc work but the ai review found something fundamentally wrong. This version removes the tc support for now and focuses on cgroup_skb.
- use helper get_socket_local_port instead of getsockname (sashiko)
- use if_nametoindex("lo") instead of value 1 (bpf-ci)
- fix IPV6_RECVERR appearance before IPv6 patch (bpf-ci)
- precise that 0 on success mean icmp_send was called but it was just an attempt since this function does not return anything (sashiko)
- explicitly consider ICMP_FRAG_NEEDED as invalid in bpf_icmp_send as it would miss the next-hop MTU info. Also test it. (sashiko)
- test for max_code + 1 for invalid (sashiko)
- add review-by tags from Jordan and Emil but remove it on the main patch as I have significantly changed it.
- check for rec_count in recursion test (sashiko)
- re-order setup_cgroup_environmment in test (sashiko)
- reset kfunc_ret on every test run (sashiko)
- check for skb route for icmp_send as the function would quietly fail and add a test (sashiko)

v10 updates:
- guard against skbs with metadata_dst before calling icmpv6_send (sashiko)
- add more review-by tags from Emil and Jordan.

v11 updates:
- move !skb_valid_dst(skb) check to both ipv4 and ipv6 (daniel)

[^1]: https://lwn.net/Articles/1022034/
[^2]: https://lore.kernel.org/bpf/[email protected]/

Link to v10: https://lore.kernel.org/bpf/[email protected]/

Mahe Tardy (5):
bpf: add bpf_icmp_send kfunc
selftests/bpf: add bpf_icmp_send kfunc cgroup_skb tests selftests/bpf: add bpf_icmp_send kfunc cgroup_skb IPv6 tests selftests/bpf: add bpf_icmp_send recursion test selftests/bpf: add bpf_icmp_send no route test

 net/core/filter.c                             |  90 ++++++
 .../bpf/prog_tests/icmp_send_kfunc.c          | 292 ++++++++++++++++++
 tools/testing/selftests/bpf/progs/icmp_send.c | 123 ++++++++
 3 files changed, 505 insertions(+)
 create mode 100644 tools/testing/selftests/bpf/prog_tests/icmp_send_kfunc.c
 create mode 100644 tools/testing/selftests/bpf/progs/icmp_send.c

--
2.34.1

author
#1 lore raw

PATCH v11 1/5 bpf: add bpf_icmp_send kfunc

This is needed in the context of Tetragon to provide improved feedback (in contrast to just dropping packets) to east-west traffic when blocked by policies using cgroup_skb programs.

This reuses concepts from netfilter reject target codepath with the differences that:
* Packets are cloned since the BPF user can still let the packet pass (SK_PASS from the cgroup_skb progs for example) and the current skb need to stay untouched (cgroup_skb hooks only allow read-only skb payload).
* We protect against recursion since the kfunc, by generating an ICMP error message, could retrigger the BPF prog that invoked it.

Only ICMP_DEST_UNREACH and ICMPV6_DEST_UNREACH are currently supported. The interface accepts a type parameter to facilitate future extension to other ICMP control message types.

For normal cgroup_skb paths, the skb dst route should already be set. However, bpf_prog_test_run_skb can create synthetic IPv4/IPv6 skbs without an attached route. In that case, icmp_send returns early, and the kfunc would otherwise report success despite no ICMP reply being sent. This check also reject metadata dsts, which are not valid struct rtable instances. While IPv6 would stricly require only rejecting metadata dsts, same check is applied for API consistency.

---
 net/core/filter.c | 90 +++++++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 90 insertions(+)
net/core/filter.c +90 -0
index 4f5cbcac3e78..e4697036c67b 100644
@@ -84,6 +84,9 @@
 #include <linux/un.h>
 #include <net/xdp_sock_drv.h>
 #include <net/inet_dscp.h>
+#include <linux/icmpv6.h>
+#include <net/icmp.h>
+#include <net/ip6_route.h>
 
 #include "dev.h"
 
@@ -12548,6 +12551,83 @@ __bpf_kfunc int bpf_xdp_pull_data(struct xdp_md *x, u32 len)
 	return 0;
 }
 
+/**
+ * bpf_icmp_send - Send an ICMP control message
+ * @skb_ctx: Packet that triggered the control message
+ * @type: ICMP type (only ICMP_DEST_UNREACH/ICMPV6_DEST_UNREACH supported)
+ * @code: ICMP code (0-15 except ICMP_FRAG_NEEDED for IPv4, 0-6 for IPv6)
+ *
+ * Sends an ICMP control message in response to the packet. The original packet
+ * is cloned before sending the ICMP message, so the BPF program can still let
+ * the packet pass if desired.
+ *
+ * Currently only ICMP_DEST_UNREACH (IPv4) and ICMPV6_DEST_UNREACH (IPv6) are
+ * supported.
+ *
+ * Return: 0 on success (send attempt), negative error code on failure:
+ *         -EBUSY: Recursion detected
+ *         -EPROTONOSUPPORT: Non-IP protocol
+ *         -EOPNOTSUPP: Unsupported ICMP type
+ *         -EINVAL: Invalid code parameter
+ *         -ENETUNREACH: No usable route/dst for the ICMP reply
+ *         -ENOMEM: Memory allocation failed
+ */
+__bpf_kfunc int bpf_icmp_send(struct __sk_buff *skb_ctx, int type, int code)
+{
+	struct sk_buff *skb = (struct sk_buff *)skb_ctx;
+	struct sk_buff *nskb;
+	struct sock *sk;
+
+	sk = skb_to_full_sk(skb);
+	if (sk && sk->sk_kern_sock &&
+	    (sk->sk_protocol == IPPROTO_ICMP || sk->sk_protocol == IPPROTO_ICMPV6))
+		return -EBUSY;
+
+	if (!skb_valid_dst(skb))
+		return -ENETUNREACH;
+
+	switch (skb->protocol) {
+#if IS_ENABLED(CONFIG_INET)
+	case htons(ETH_P_IP): {
+		if (type != ICMP_DEST_UNREACH)
+			return -EOPNOTSUPP;
+		if (code < 0 || code > NR_ICMP_UNREACH ||
+		    code == ICMP_FRAG_NEEDED) /* needs a valid next-hop MTU */
+			return -EINVAL;
+
+		nskb = skb_clone(skb, GFP_ATOMIC);
+		if (!nskb)
+			return -ENOMEM;
+
+		memset(IPCB(nskb), 0, sizeof(*IPCB(nskb)));
+		icmp_send(nskb, type, code, 0);
+		consume_skb(nskb);
+		break;
+	}
+#endif
+#if IS_ENABLED(CONFIG_IPV6)
+	case htons(ETH_P_IPV6):
+		if (type != ICMPV6_DEST_UNREACH)
+			return -EOPNOTSUPP;
+		if (code < 0 || code > ICMPV6_REJECT_ROUTE)
+			return -EINVAL;
+
+		nskb = skb_clone(skb, GFP_ATOMIC);
+		if (!nskb)
+			return -ENOMEM;
+
+		memset(IP6CB(nskb), 0, sizeof(*IP6CB(nskb)));
+		icmpv6_send(nskb, type, code, 0);
+		consume_skb(nskb);
+		break;
+#endif
+	default:
+		return -EPROTONOSUPPORT;
+	}
+
+	return 0;
+}
+
 __bpf_kfunc_end_defs();
 
 int bpf_dynptr_from_skb_rdonly(struct __sk_buff *skb, u64 flags,
@@ -12590,6 +12670,10 @@ BTF_KFUNCS_START(bpf_kfunc_check_set_sock_ops)
 BTF_ID_FLAGS(func, bpf_sock_ops_enable_tx_tstamp)
 BTF_KFUNCS_END(bpf_kfunc_check_set_sock_ops)
 
+BTF_KFUNCS_START(bpf_kfunc_check_set_icmp_send)
+BTF_ID_FLAGS(func, bpf_icmp_send)
+BTF_KFUNCS_END(bpf_kfunc_check_set_icmp_send)
+
 static const struct btf_kfunc_id_set bpf_kfunc_set_skb = {
 	.owner = THIS_MODULE,
 	.set = &bpf_kfunc_check_set_skb,
@@ -12620,6 +12704,11 @@ static const struct btf_kfunc_id_set bpf_kfunc_set_sock_ops = {
 	.set = &bpf_kfunc_check_set_sock_ops,
 };
 
+static const struct btf_kfunc_id_set bpf_kfunc_set_icmp_send = {
+	.owner = THIS_MODULE,
+	.set = &bpf_kfunc_check_set_icmp_send,
+};
+
 static int __init bpf_kfunc_init(void)
 {
 	int ret;
@@ -12641,6 +12730,7 @@ static int __init bpf_kfunc_init(void)
 	ret = ret ?: register_btf_kfunc_id_set(BPF_PROG_TYPE_CGROUP_SOCK_ADDR,
 					       &bpf_kfunc_set_sock_addr);
 	ret = ret ?: register_btf_kfunc_id_set(BPF_PROG_TYPE_SCHED_CLS, &bpf_kfunc_set_tcp_reqsk);
+	ret = ret ?: register_btf_kfunc_id_set(BPF_PROG_TYPE_CGROUP_SKB, &bpf_kfunc_set_icmp_send);
 	return ret ?: register_btf_kfunc_id_set(BPF_PROG_TYPE_SOCK_OPS, &bpf_kfunc_set_sock_ops);
 }
 late_initcall(bpf_kfunc_init);

--
2.34.1

Acked-by on v11 1/5
#2 lore raw

Re: [PATCH bpf-next v11 1/5] bpf: add bpf_icmp_send kfunc

Quoted 74 lines · Mahe Tardy

This is needed in the context of Tetragon to provide improved feedback (in contrast to just dropping packets) to east-west traffic when blocked by policies using cgroup_skb programs.

This reuses concepts from netfilter reject target codepath with the differences that:
* Packets are cloned since the BPF user can still let the packet pass (SK_PASS from the cgroup_skb progs for example) and the current skb need to stay untouched (cgroup_skb hooks only allow read-only skb payload).
* We protect against recursion since the kfunc, by generating an ICMP error message, could retrigger the BPF prog that invoked it.

Only ICMP_DEST_UNREACH and ICMPV6_DEST_UNREACH are currently supported. The interface accepts a type parameter to facilitate future extension to other ICMP control message types.

For normal cgroup_skb paths, the skb dst route should already be set. However, bpf_prog_test_run_skb can create synthetic IPv4/IPv6 skbs without an attached route. In that case, icmp_send returns early, and the kfunc would otherwise report success despite no ICMP reply being sent. This check also reject metadata dsts, which are not valid struct rtable instances. While IPv6 would stricly require only rejecting metadata dsts, same check is applied for API consistency.

---
 net/core/filter.c | 90 +++++++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 90 insertions(+)
net/core/filter.c +27 -0
index 4f5cbcac3e78..e4697036c67b 100644
@@ -84,6 +84,9 @@
 #include <linux/un.h>
 #include <net/xdp_sock_drv.h>
 #include <net/inet_dscp.h>
+#include <linux/icmpv6.h>
+#include <net/icmp.h>
+#include <net/ip6_route.h>
 
 #include "dev.h"
 
@@ -12548,6 +12551,83 @@ __bpf_kfunc int bpf_xdp_pull_data(struct xdp_md *x, u32 len)
 	return 0;
 }
 
+/**
+ * bpf_icmp_send - Send an ICMP control message
+ * @skb_ctx: Packet that triggered the control message
+ * @type: ICMP type (only ICMP_DEST_UNREACH/ICMPV6_DEST_UNREACH supported)
+ * @code: ICMP code (0-15 except ICMP_FRAG_NEEDED for IPv4, 0-6 for IPv6)
+ *
+ * Sends an ICMP control message in response to the packet. The original packet
+ * is cloned before sending the ICMP message, so the BPF program can still let
+ * the packet pass if desired.
+ *
+ * Currently only ICMP_DEST_UNREACH (IPv4) and ICMPV6_DEST_UNREACH (IPv6) are
+ * supported.
+ *
+ * Return: 0 on success (send attempt), negative error code on failure:
+ *         -EBUSY: Recursion detected
+ *         -EPROTONOSUPPORT: Non-IP protocol
+ *         -EOPNOTSUPP: Unsupported ICMP type
+ *         -EINVAL: Invalid code parameter
+ *         -ENETUNREACH: No usable route/dst for the ICMP reply
+ *         -ENOMEM: Memory allocation failed
+ */
+__bpf_kfunc int bpf_icmp_send(struct __sk_buff *skb_ctx, int type, int code)
+{
+	struct sk_buff *skb = (struct sk_buff *)skb_ctx;

net/core/filter.c __bpf_kfunc int bpf_xdp_pull_data(struct xdp_md *x, u32 len) · line 12587

Quoted 10 lines
net/core/filter.c +10 -0
+	struct sk_buff *nskb;
+	struct sock *sk;
+
+	sk = skb_to_full_sk(skb);
+	if (sk && sk->sk_kern_sock &&
+	    (sk->sk_protocol == IPPROTO_ICMP || sk->sk_protocol == IPPROTO_ICMPV6))
+		return -EBUSY;
+
+	if (!skb_valid_dst(skb))
+		return -ENETUNREACH;

This looks much better, thanks!

author
#3 lore raw

PATCH v11 2/5 selftests/bpf: add bpf_icmp_send kfunc cgroup_skb tests

In reply to Mahe Tardy

This test opens a server and client, enters a new cgroup, attach a cgroup_skb program on egress and calls the bpf_icmp_send function from the client egress so that an ICMP unreach control message is sent back to the client. It then fetches the message from the error queue to confirm the correct ICMP unreach code has been sent.

Note that, for the client, we have to connect in non-blocking mode to let the test execute faster. Otherwise, we need to wait for the TCP three-way handshake to timeout in the kernel before reading the errno.

Also note that we don't set IP_RECVERR on the socket in connect_to_fd_nonblock since the error will be transferred anyway in our test because the connection is rejected at the beginning of the TCP handshake. See in net/ipv4/tcp_ipv4.c:tcp_v4_err for more details.

---
 .../bpf/prog_tests/icmp_send_kfunc.c          | 164 ++++++++++++++++++
 tools/testing/selftests/bpf/progs/icmp_send.c |  38 ++++
 2 files changed, 202 insertions(+)
 create mode 100644 tools/testing/selftests/bpf/prog_tests/icmp_send_kfunc.c
 create mode 100644 tools/testing/selftests/bpf/progs/icmp_send.c
tools/testing/selftests/bpf/prog_tests/icmp_send_kfunc.c new file +164 -0
new file mode 100644
index 000000000000..b8a98c90053e
@@ -0,0 +1,164 @@
+// SPDX-License-Identifier: GPL-2.0
+#include <test_progs.h>
+#include <network_helpers.h>
+#include <linux/errqueue.h>
+#include <poll.h>
+#include "icmp_send.skel.h"
+
+#define TIMEOUT_MS 1000
+
+#define ICMP_DEST_UNREACH 3
+
+#define ICMP_FRAG_NEEDED 4
+#define NR_ICMP_UNREACH 15
+
+#define KFUNC_RET_UNSET -1
+
+static int connect_to_fd_nonblock(int server_fd)
+{
+	struct sockaddr_storage addr;
+	socklen_t len = sizeof(addr);
+	int fd, err;
+
+	if (getsockname(server_fd, (struct sockaddr *)&addr, &len))
+		return -1;
+
+	fd = socket(addr.ss_family, SOCK_STREAM | SOCK_NONBLOCK, 0);
+	if (fd < 0)
+		return -1;
+
+	err = connect(fd, (struct sockaddr *)&addr, len);
+	if (err < 0 && errno != EINPROGRESS) {
+		close(fd);
+		return -1;
+	}
+
+	return fd;
+}
+
+static void read_icmp_errqueue(int sockfd, int expected_code)
+{
+	struct sock_extended_err *sock_err;
+	char ctrl_buf[512];
+	struct msghdr msg = {
+		.msg_control = ctrl_buf,
+		.msg_controllen = sizeof(ctrl_buf),
+	};
+	struct pollfd pfd = {
+		.fd = sockfd,
+		.events = POLLERR,
+	};
+	struct cmsghdr *cm;
+	ssize_t n;
+
+	if (!ASSERT_GE(poll(&pfd, 1, TIMEOUT_MS), 1, "poll_errqueue"))
+		return;
+
+	n = recvmsg(sockfd, &msg, MSG_ERRQUEUE);
+	if (!ASSERT_GE(n, 0, "recvmsg_errqueue"))
+		return;
+
+	cm = CMSG_FIRSTHDR(&msg);
+	if (!ASSERT_NEQ(cm, NULL, "cm_firsthdr_null"))
+		return;
+
+	for (; cm; cm = CMSG_NXTHDR(&msg, cm)) {
+		if (cm->cmsg_level != IPPROTO_IP || cm->cmsg_type != IP_RECVERR)
+			continue;
+
+		sock_err = (struct sock_extended_err *)CMSG_DATA(cm);
+
+		if (!ASSERT_EQ(sock_err->ee_origin, SO_EE_ORIGIN_ICMP,
+			       "sock_err_origin_icmp"))
+			return;
+		if (!ASSERT_EQ(sock_err->ee_type, ICMP_DEST_UNREACH,
+			       "sock_err_type_dest_unreach"))
+			return;
+		ASSERT_EQ(sock_err->ee_code, expected_code, "sock_err_code");
+		return;
+	}
+
+	ASSERT_FAIL("no IP_RECVERR control message found");
+}
+
+static bool valid_unreach_code(int code)
+{
+	if (code < 0)
+		return false;
+
+	return code <= NR_ICMP_UNREACH && code != ICMP_FRAG_NEEDED;
+}
+
+static void trigger_prog_read_icmp_errqueue(struct icmp_send *skel, int code)
+{
+	int srv_fd = -1, client_fd = -1;
+	int port;
+
+	srv_fd = start_server(AF_INET, SOCK_STREAM, "127.0.0.1", 0, TIMEOUT_MS);
+	if (!ASSERT_OK_FD(srv_fd, "start_server"))
+		return;
+
+	port = get_socket_local_port(srv_fd);
+	if (!ASSERT_GE(port, 0, "get_socket_local_port")) {
+		close(srv_fd);
+		return;
+	}
+
+	skel->bss->server_port = ntohs(port);
+	skel->bss->unreach_code = code;
+	skel->data->kfunc_ret = KFUNC_RET_UNSET;
+
+	client_fd = connect_to_fd_nonblock(srv_fd);
+	if (!ASSERT_OK_FD(client_fd, "client_connect_nonblock")) {
+		close(srv_fd);
+		return;
+	}
+
+	if (valid_unreach_code(code))
+		read_icmp_errqueue(client_fd, code);
+
+	close(client_fd);
+	close(srv_fd);
+}
+
+void test_icmp_send_unreach_cgroup(void)
+{
+	struct icmp_send *skel;
+	int cgroup_fd = -1;
+
+	skel = icmp_send__open_and_load();
+	if (!ASSERT_OK_PTR(skel, "skel_open"))
+		goto cleanup;
+
+	cgroup_fd = test__join_cgroup("/icmp_send_unreach_cgroup");
+	if (!ASSERT_OK_FD(cgroup_fd, "join_cgroup"))
+		goto cleanup;
+
+	skel->links.egress =
+		bpf_program__attach_cgroup(skel->progs.egress, cgroup_fd);
+	if (!ASSERT_OK_PTR(skel->links.egress, "prog_attach_cgroup"))
+		goto cleanup;
+
+	for (int code = 0; code <= NR_ICMP_UNREACH; code++) {
+		if (code == ICMP_FRAG_NEEDED)
+			continue;
+
+		trigger_prog_read_icmp_errqueue(skel, code);
+		ASSERT_EQ(skel->data->kfunc_ret, 0, "kfunc_ret");
+	}
+
+	/* Test invalid codes */
+	trigger_prog_read_icmp_errqueue(skel, -1);
+	ASSERT_EQ(skel->data->kfunc_ret, -EINVAL, "kfunc_ret");
+
+	trigger_prog_read_icmp_errqueue(skel, NR_ICMP_UNREACH + 1);
+	ASSERT_EQ(skel->data->kfunc_ret, -EINVAL, "kfunc_ret");
+
+	trigger_prog_read_icmp_errqueue(skel, ICMP_FRAG_NEEDED);
+	ASSERT_EQ(skel->data->kfunc_ret, -EINVAL, "kfunc_ret");
+
+cleanup:
+	icmp_send__destroy(skel);
+	if (cgroup_fd >= 0)
+		close(cgroup_fd);
+}
tools/testing/selftests/bpf/progs/icmp_send.c new file +38 -0
new file mode 100644
index 000000000000..6d0be0a9afe1
@@ -0,0 +1,38 @@
+// SPDX-License-Identifier: GPL-2.0
+#include "vmlinux.h"
+#include <bpf/bpf_helpers.h>
+#include <bpf/bpf_endian.h>
+
+/* 127.0.0.1 in host byte order */
+#define SERVER_IP 0x7F000001
+
+#define ICMP_DEST_UNREACH 3
+
+__u16 server_port = 0;
+int unreach_code = 0;
+int kfunc_ret = -1;
+
+SEC("cgroup_skb/egress")
+int egress(struct __sk_buff *skb)
+{
+	void *data = (void *)(long)skb->data;
+	void *data_end = (void *)(long)skb->data_end;
+	struct iphdr *iph;
+	struct tcphdr *tcph;
+
+	iph = data;
+	if ((void *)(iph + 1) > data_end || iph->version != 4 ||
+	    iph->protocol != IPPROTO_TCP || iph->daddr != bpf_htonl(SERVER_IP))
+		return SK_PASS;
+
+	tcph = (void *)iph + iph->ihl * 4;
+	if ((void *)(tcph + 1) > data_end ||
+	    tcph->dest != bpf_htons(server_port))
+		return SK_PASS;
+
+	kfunc_ret = bpf_icmp_send(skb, ICMP_DEST_UNREACH, unreach_code);
+
+	return SK_DROP;
+}
+
+char LICENSE[] SEC("license") = "Dual BSD/GPL";

--
2.34.1

Acked-by on v11 2/5
#4 lore raw

Re: [PATCH bpf-next v11 2/5] selftests/bpf: add bpf_icmp_send kfunc cgroup_skb tests

Quoted 10 lines · Mahe Tardy

This test opens a server and client, enters a new cgroup, attach a cgroup_skb program on egress and calls the bpf_icmp_send function from the client egress so that an ICMP unreach control message is sent back to the client. It then fetches the message from the error queue to confirm the correct ICMP unreach code has been sent.

Note that, for the client, we have to connect in non-blocking mode to let the test execute faster. Otherwise, we need to wait for the TCP three-way handshake to timeout in the kernel before reading the errno.

Quoted 8 lines

Also note that we don't set IP_RECVERR on the socket in connect_to_fd_nonblock since the error will be transferred anyway in our test because the connection is rejected at the beginning of the TCP handshake. See in net/ipv4/tcp_ipv4.c:tcp_v4_err for more details.

author
#5 lore raw

PATCH v11 3/5 selftests/bpf: add bpf_icmp_send kfunc cgroup_skb IPv6 tests

In reply to Mahe Tardy

This test extends the existing cgroup_skb tests with IPv6 support.

Note that we need to set IPV6_RECVERR on the socket for IPv6 in connect_to_fd_nonblock otherwise the error will be ignored even if we are in the middle of the TCP handshake. See in net/ipv6/datagram.c:ipv6_icmp_error for more details.

---
 .../bpf/prog_tests/icmp_send_kfunc.c          | 91 +++++++++++++------
 tools/testing/selftests/bpf/progs/icmp_send.c | 48 ++++++++--
 2 files changed, 101 insertions(+), 38 deletions(-)
tools/testing/selftests/bpf/prog_tests/icmp_send_kfunc.c +62 -29
index b8a98c90053e..bbb3c3d4509c 100644
@@ -8,9 +8,11 @@
 #define TIMEOUT_MS 1000
 
 #define ICMP_DEST_UNREACH 3
+#define ICMPV6_DEST_UNREACH 1
 
 #define ICMP_FRAG_NEEDED 4
 #define NR_ICMP_UNREACH 15
+#define ICMPV6_REJECT_ROUTE 6
 
 #define KFUNC_RET_UNSET -1
 
@@ -18,7 +20,7 @@ static int connect_to_fd_nonblock(int server_fd)
 {
 	struct sockaddr_storage addr;
 	socklen_t len = sizeof(addr);
-	int fd, err;
+	int fd, err, on = 1;
 
 	if (getsockname(server_fd, (struct sockaddr *)&addr, &len))
 		return -1;
@@ -27,6 +29,12 @@ static int connect_to_fd_nonblock(int server_fd)
 	if (fd < 0)
 		return -1;
 
+	if (addr.ss_family == AF_INET6 &&
+	    setsockopt(fd, IPPROTO_IPV6, IPV6_RECVERR, &on, sizeof(on)) < 0) {
+		close(fd);
+		return -1;
+	}
+
 	err = connect(fd, (struct sockaddr *)&addr, len);
 	if (err < 0 && errno != EINPROGRESS) {
 		close(fd);
@@ -36,8 +44,14 @@ static int connect_to_fd_nonblock(int server_fd)
 	return fd;
 }
 
-static void read_icmp_errqueue(int sockfd, int expected_code)
+static void read_icmp_errqueue(int sockfd, int expected_code, int af)
 {
+	int expected_ee_type = (af == AF_INET) ? ICMP_DEST_UNREACH :
+						 ICMPV6_DEST_UNREACH;
+	int expected_origin = (af == AF_INET) ? SO_EE_ORIGIN_ICMP :
+						SO_EE_ORIGIN_ICMP6;
+	int expected_level = (af == AF_INET) ? IPPROTO_IP : IPPROTO_IPV6;
+	int expected_type = (af == AF_INET) ? IP_RECVERR : IPV6_RECVERR;
 	struct sock_extended_err *sock_err;
 	char ctrl_buf[512];
 	struct msghdr msg = {
@@ -63,38 +77,43 @@ static void read_icmp_errqueue(int sockfd, int expected_code)
 		return;
 
 	for (; cm; cm = CMSG_NXTHDR(&msg, cm)) {
-		if (cm->cmsg_level != IPPROTO_IP || cm->cmsg_type != IP_RECVERR)
+		if (cm->cmsg_level != expected_level ||
+		    cm->cmsg_type != expected_type)
 			continue;
 
 		sock_err = (struct sock_extended_err *)CMSG_DATA(cm);
 
-		if (!ASSERT_EQ(sock_err->ee_origin, SO_EE_ORIGIN_ICMP,
-			       "sock_err_origin_icmp"))
+		if (!ASSERT_EQ(sock_err->ee_origin, expected_origin,
+			       "sock_err_origin"))
 			return;
-		if (!ASSERT_EQ(sock_err->ee_type, ICMP_DEST_UNREACH,
+		if (!ASSERT_EQ(sock_err->ee_type, expected_ee_type,
 			       "sock_err_type_dest_unreach"))
 			return;
 		ASSERT_EQ(sock_err->ee_code, expected_code, "sock_err_code");
 		return;
 	}
 
-	ASSERT_FAIL("no IP_RECVERR control message found");
+	ASSERT_FAIL("no IP_RECVERR/IPV6_RECVERR control message found");
 }
 
-static bool valid_unreach_code(int code)
+static bool valid_unreach_code(int code, int af)
 {
 	if (code < 0)
 		return false;
 
-	return code <= NR_ICMP_UNREACH && code != ICMP_FRAG_NEEDED;
+	if (af == AF_INET)
+		return code <= NR_ICMP_UNREACH && code != ICMP_FRAG_NEEDED;
+
+	return code <= ICMPV6_REJECT_ROUTE;
 }
 
-static void trigger_prog_read_icmp_errqueue(struct icmp_send *skel, int code)
+static void trigger_prog_read_icmp_errqueue(struct icmp_send *skel, int code,
+					    int af, const char *ip)
 {
 	int srv_fd = -1, client_fd = -1;
 	int port;
 
-	srv_fd = start_server(AF_INET, SOCK_STREAM, "127.0.0.1", 0, TIMEOUT_MS);
+	srv_fd = start_server(af, SOCK_STREAM, ip, 0, TIMEOUT_MS);
 	if (!ASSERT_OK_FD(srv_fd, "start_server"))
 		return;
 
@@ -105,6 +124,8 @@ static void trigger_prog_read_icmp_errqueue(struct icmp_send *skel, int code)
 	}
 
 	skel->bss->server_port = ntohs(port);
+	skel->bss->unreach_type = (af == AF_INET) ? ICMP_DEST_UNREACH :
+						    ICMPV6_DEST_UNREACH;
 	skel->bss->unreach_code = code;
 	skel->data->kfunc_ret = KFUNC_RET_UNSET;
 
@@ -114,13 +135,37 @@ static void trigger_prog_read_icmp_errqueue(struct icmp_send *skel, int code)
 		return;
 	}
 
-	if (valid_unreach_code(code))
-		read_icmp_errqueue(client_fd, code);
+	if (valid_unreach_code(code, af))
+		read_icmp_errqueue(client_fd, code, af);
 
 	close(client_fd);
 	close(srv_fd);
 }
 
+static void run_icmp_test(struct icmp_send *skel, int af, const char *ip,
+			  int max_code)
+{
+	for (int code = 0; code <= max_code; code++) {
+		if (af == AF_INET && code == ICMP_FRAG_NEEDED)
+			continue;
+
+		trigger_prog_read_icmp_errqueue(skel, code, af, ip);
+		ASSERT_EQ(skel->data->kfunc_ret, 0, "kfunc_ret");
+	}
+
+	/* Test invalid codes */
+	trigger_prog_read_icmp_errqueue(skel, -1, af, ip);
+	ASSERT_EQ(skel->data->kfunc_ret, -EINVAL, "kfunc_ret");
+
+	trigger_prog_read_icmp_errqueue(skel, max_code + 1, af, ip);
+	ASSERT_EQ(skel->data->kfunc_ret, -EINVAL, "kfunc_ret");
+
+	if (af == AF_INET) {
+		trigger_prog_read_icmp_errqueue(skel, ICMP_FRAG_NEEDED, af, ip);
+		ASSERT_EQ(skel->data->kfunc_ret, -EINVAL, "kfunc_ret");
+	}
+}
+
 void test_icmp_send_unreach_cgroup(void)
 {
 	struct icmp_send *skel;
@@ -139,23 +184,11 @@ void test_icmp_send_unreach_cgroup(void)
 	if (!ASSERT_OK_PTR(skel->links.egress, "prog_attach_cgroup"))
 		goto cleanup;
 
-	for (int code = 0; code <= NR_ICMP_UNREACH; code++) {
-		if (code == ICMP_FRAG_NEEDED)
-			continue;
-
-		trigger_prog_read_icmp_errqueue(skel, code);
-		ASSERT_EQ(skel->data->kfunc_ret, 0, "kfunc_ret");
-	}
-
-	/* Test invalid codes */
-	trigger_prog_read_icmp_errqueue(skel, -1);
-	ASSERT_EQ(skel->data->kfunc_ret, -EINVAL, "kfunc_ret");
+	if (test__start_subtest("ipv4"))
+		run_icmp_test(skel, AF_INET, "127.0.0.1", NR_ICMP_UNREACH);
 
-	trigger_prog_read_icmp_errqueue(skel, NR_ICMP_UNREACH + 1);
-	ASSERT_EQ(skel->data->kfunc_ret, -EINVAL, "kfunc_ret");
-
-	trigger_prog_read_icmp_errqueue(skel, ICMP_FRAG_NEEDED);
-	ASSERT_EQ(skel->data->kfunc_ret, -EINVAL, "kfunc_ret");
+	if (test__start_subtest("ipv6"))
+		run_icmp_test(skel, AF_INET6, "::1", ICMPV6_REJECT_ROUTE);
 
 cleanup:
 	icmp_send__destroy(skel);
tools/testing/selftests/bpf/progs/icmp_send.c +39 -9

68 lines not on this page · raw message

--
2.34.1

Acked-by on v11 3/5
#6 lore raw

Re: [PATCH bpf-next v11 3/5] selftests/bpf: add bpf_icmp_send kfunc cgroup_skb IPv6 tests

Quoted 9 lines · Mahe Tardy

This test extends the existing cgroup_skb tests with IPv6 support.

Note that we need to set IPV6_RECVERR on the socket for IPv6 in connect_to_fd_nonblock otherwise the error will be ignored even if we are in the middle of the TCP handshake. See in net/ipv6/datagram.c:ipv6_icmp_error for more details.

author
#7 lore raw

PATCH v11 4/5 selftests/bpf: add bpf_icmp_send recursion test

In reply to Mahe Tardy

This test is similar to test_icmp_send_unreach_cgroup but checks that, in case of recursion, meaning that the BPF program calling the kfunc was re-triggered by the icmp_send done by the kfunc, the kfunc will stop early and return -EBUSY.

The test attaches to the root cgroup to ensure the ICMP packet generated by the kfunc re-triggers the BPF program.

---
 .../bpf/prog_tests/icmp_send_kfunc.c          | 46 ++++++++++++++++
 tools/testing/selftests/bpf/progs/icmp_send.c | 55 +++++++++++++++++++
 2 files changed, 101 insertions(+)
tools/testing/selftests/bpf/prog_tests/icmp_send_kfunc.c +46 -0
index bbb3c3d4509c..bb532aa0d158 100644
@@ -1,8 +1,10 @@
 // SPDX-License-Identifier: GPL-2.0
 #include <test_progs.h>
 #include <network_helpers.h>
+#include <cgroup_helpers.h>
 #include <linux/errqueue.h>
 #include <poll.h>
+#include <unistd.h>
 #include "icmp_send.skel.h"
 
 #define TIMEOUT_MS 1000
@@ -10,6 +12,7 @@
 #define ICMP_DEST_UNREACH 3
 #define ICMPV6_DEST_UNREACH 1
 
+#define ICMP_HOST_UNREACH 1
 #define ICMP_FRAG_NEEDED 4
 #define NR_ICMP_UNREACH 15
 #define ICMPV6_REJECT_ROUTE 6
@@ -195,3 +198,46 @@ void test_icmp_send_unreach_cgroup(void)
 	if (cgroup_fd >= 0)
 		close(cgroup_fd);
 }
+
+void test_icmp_send_unreach_recursion(void)
+{
+	struct icmp_send *skel;
+	int cgroup_fd = -1;
+	int err;
+
+	err = setup_cgroup_environment();
+	if (!ASSERT_OK(err, "setup_cgroup_environment"))
+		return;
+
+	skel = icmp_send__open_and_load();
+	if (!ASSERT_OK_PTR(skel, "skel_open"))
+		goto cleanup;
+
+	cgroup_fd = get_root_cgroup();
+	if (!ASSERT_OK_FD(cgroup_fd, "get_root_cgroup"))
+		goto cleanup;
+
+	skel->data->target_pid = getpid();
+	skel->links.recursion =
+		bpf_program__attach_cgroup(skel->progs.recursion, cgroup_fd);
+	if (!ASSERT_OK_PTR(skel->links.recursion, "prog_attach_cgroup"))
+		goto cleanup;
+
+	trigger_prog_read_icmp_errqueue(skel, ICMP_HOST_UNREACH, AF_INET,
+					"127.0.0.1");
+
+	/*
+	 * Because there's recursion involved, the first call will return at
+	 * index 1 since it will return the second, and the second call will
+	 * return at index 0 since it will return the first.
+	 */
+	ASSERT_EQ(skel->bss->rec_count, 2, "rec_count");
+	ASSERT_EQ(skel->data->rec_kfunc_rets[0], -EBUSY, "kfunc_rets[0]");
+	ASSERT_EQ(skel->data->rec_kfunc_rets[1], 0, "kfunc_rets[1]");
+
+cleanup:
+	icmp_send__destroy(skel);
+	if (cgroup_fd >= 0)
+		close(cgroup_fd);
+	cleanup_cgroup_environment();
+}
tools/testing/selftests/bpf/progs/icmp_send.c +55 -0

65 lines not on this page · raw message

--
2.34.1

Acked-by on v11 4/5
#8 lore raw

Re: [PATCH bpf-next v11 4/5] selftests/bpf: add bpf_icmp_send recursion test

Quoted 11 lines · Mahe Tardy

This test is similar to test_icmp_send_unreach_cgroup but checks that, in case of recursion, meaning that the BPF program calling the kfunc was re-triggered by the icmp_send done by the kfunc, the kfunc will stop early and return -EBUSY.

The test attaches to the root cgroup to ensure the ICMP packet generated by the kfunc re-triggers the BPF program.

author
#9 lore raw

PATCH v11 5/5 selftests/bpf: add bpf_icmp_send no route test

In reply to Mahe Tardy

For normal live cgroup_skb paths, the skb should already be routed. The exception is for test run via BPF_PROG_TEST_RUN with packets created via bpf_prog_test_run_skb. Those lack dst route and thus the icmp_send would quietly fail by returning early.

This test exercises this and makes sure the kfunc returns -ENETUNREACH.

---
 .../bpf/prog_tests/icmp_send_kfunc.c          | 49 +++++++++++++++++++
 1 file changed, 49 insertions(+)
tools/testing/selftests/bpf/prog_tests/icmp_send_kfunc.c +49 -0
index bb532aa0d158..9318d4bc7ce8 100644
@@ -169,6 +169,49 @@ static void run_icmp_test(struct icmp_send *skel, int af, const char *ip,
 	}
 }
 
+static void run_icmp_no_route_test(struct icmp_send *skel, int af)
+{
+	union {
+		struct ipv4_packet v4;
+		struct ipv6_packet v6;
+	} pkt;
+	DECLARE_LIBBPF_OPTS(bpf_test_run_opts, opts,
+		.data_in = &pkt,
+	);
+	int err;
+
+	switch (af) {
+	case AF_INET:
+		pkt.v4 = pkt_v4;
+		pkt.v4.iph.version = 4;
+		pkt.v4.iph.daddr = htonl(INADDR_LOOPBACK);
+		pkt.v4.tcp.dest = htons(80);
+		opts.data_size_in = sizeof(pkt.v4);
+		skel->bss->unreach_type = ICMP_DEST_UNREACH;
+		break;
+	case AF_INET6:
+		pkt.v6 = pkt_v6;
+		pkt.v6.iph.version = 6;
+		pkt.v6.iph.daddr = in6addr_loopback;
+		pkt.v6.tcp.dest = htons(80);
+		opts.data_size_in = sizeof(pkt.v6);
+		skel->bss->unreach_type = ICMPV6_DEST_UNREACH;
+		break;
+	default:
+		ASSERT_FAIL("af_not_supported");
+		return;
+	}
+
+	skel->bss->server_port = 80;
+	skel->data->kfunc_ret = KFUNC_RET_UNSET;
+
+	err = bpf_prog_test_run_opts(bpf_program__fd(skel->progs.egress), &opts);
+	if (!ASSERT_OK(err, "test_run"))
+		return;
+
+	ASSERT_EQ(skel->data->kfunc_ret, -ENETUNREACH, "kfunc_ret_no_route");
+}
+
 void test_icmp_send_unreach_cgroup(void)
 {
 	struct icmp_send *skel;
@@ -193,6 +236,12 @@ void test_icmp_send_unreach_cgroup(void)
 	if (test__start_subtest("ipv6"))
 		run_icmp_test(skel, AF_INET6, "::1", ICMPV6_REJECT_ROUTE);
 
+	if (test__start_subtest("no_route_ipv4"))
+		run_icmp_no_route_test(skel, AF_INET);
+
+	if (test__start_subtest("no_route_ipv6"))
+		run_icmp_no_route_test(skel, AF_INET6);
+
 cleanup:
 	icmp_send__destroy(skel);
 	if (cgroup_fd >= 0)

--
2.34.1

#10 lore raw

Re: [PATCH bpf-next v11 5/5] selftests/bpf: add bpf_icmp_send no route test

Thank you for your contribution! Sashiko AI review found 1 potential issue(s) to consider: - [Low] The run_icmp_no_route_test subtest suffers from state pollution because it fails to reset…

Thank you for your contribution! Sashiko AI review found 1 potential issue(s) to consider:
- [Low] The run_icmp_no_route_test subtest suffers from state pollution because it fails to reset skel->bss->unreach_code, passing stale or invalid ICMP codes to the BPF program. --

--- Patch [5]: [PATCH bpf-next v11 5/5] selftests/bpf: add bpf_icmp_send no route test --- commit 43111be9123ff27205045da2a59f2daf8fc9a986
Author: Mahe Tardy <[email protected]>

selftests/bpf: add bpf_icmp_send no route test

This commit adds a test to verify that the bpf_icmp_send kfunc returns -ENETUNREACH when a test run is performed on an skb without a destination route.

Quoted 4 lines
tools/testing/selftests/bpf/prog_tests/icmp_send_kfunc.c +0 -0
index bb532aa0d1580..9318d4bc7ce8b 100644

[ ... ]

Quoted 25 lines
tools/testing/selftests/bpf/prog_tests/icmp_send_kfunc.c +24 -0
@@ -169,6 +169,49 @@ static void run_icmp_test(struct icmp_send *skel, int af, const char *ip,
+static void run_icmp_no_route_test(struct icmp_send *skel, int af)
+{
+	union {
+		struct ipv4_packet v4;
+		struct ipv6_packet v6;
+	} pkt;
+	DECLARE_LIBBPF_OPTS(bpf_test_run_opts, opts,
+		.data_in = &pkt,
+	);
+	int err;
+
+	switch (af) {
+	case AF_INET:
+		pkt.v4 = pkt_v4;
+		pkt.v4.iph.version = 4;
+		pkt.v4.iph.daddr = htonl(INADDR_LOOPBACK);
+		pkt.v4.tcp.dest = htons(80);
+		opts.data_size_in = sizeof(pkt.v4);
+		skel->bss->unreach_type = ICMP_DEST_UNREACH;
+		break;
+	case AF_INET6:
+		pkt.v6 = pkt_v6;
+		pkt.v6.iph.version = 6;
+		pkt.v6.iph.daddr = in6addr_loopback;

tools/testing/selftests/bpf/prog_tests/icmp_send_kfunc.c static void run_icmp_test(struct icmp_send *skel, int af, const char *ip, · line 202

Quoted 10 lines
tools/testing/selftests/bpf/prog_tests/icmp_send_kfunc.c +10 -0
+		pkt.v6.tcp.dest = htons(80);
+		opts.data_size_in = sizeof(pkt.v6);
+		skel->bss->unreach_type = ICMPV6_DEST_UNREACH;
+		break;
+	default:
+		ASSERT_FAIL("af_not_supported");
+		return;
+	}
+
+	skel->bss->server_port = 80;

[Severity: Low]
Does this leave skel->bss->unreach_code uninitialized for this test?

Since the run_icmp_no_route_test subtests share the same BPF skeleton as the previous run_icmp_test subtests, if they run after the ipv6 subtest, unreach_code is left at 7 (max_code + 1 from testing invalid codes).

For no_route_ipv6, code 7 is passed to the kernel, which is an invalid ICMPv6 code (max is 6). The test currently passes only because the kernel's bpf_icmp_send implementation checks for a missing destination route and returns early before validating the code parameter.

Would it be better to reset skel->bss->unreach_code to a valid value here to prevent test state pollution?

Quoted 8 lines
tools/testing/selftests/bpf/prog_tests/icmp_send_kfunc.c +8 -0
+	skel->data->kfunc_ret = KFUNC_RET_UNSET;
+
+	err = bpf_prog_test_run_opts(bpf_program__fd(skel->progs.egress), &opts);
+	if (!ASSERT_OK(err, "test_run"))
+		return;
+
+	ASSERT_EQ(skel->data->kfunc_ret, -ENETUNREACH, "kfunc_ret_no_route");
+}
Signature · 1 line
Sashiko AI review · https://sashiko.dev/#/patchset/[email protected]?part=5
author
#11 lore raw

Re: [PATCH bpf-next v11 5/5] selftests/bpf: add bpf_icmp_send no route test

Quoted 64 lines · On Thu, Jul 09, 2026 at 03:00:10PM +0000, [email protected] wrote:

Thank you for your contribution! Sashiko AI review found 1 potential issue(s) to consider:
- [Low] The run_icmp_no_route_test subtest suffers from state pollution because it fails to reset skel->bss->unreach_code, passing stale or invalid ICMP codes to the BPF program. --

--- Patch [5]: [PATCH bpf-next v11 5/5] selftests/bpf: add bpf_icmp_send no route test --- commit 43111be9123ff27205045da2a59f2daf8fc9a986
Author: Mahe Tardy <[email protected]>

selftests/bpf: add bpf_icmp_send no route test

This commit adds a test to verify that the bpf_icmp_send kfunc returns -ENETUNREACH when a test run is performed on an skb without a destination route.

Quoted 4 lines
tools/testing/selftests/bpf/prog_tests/icmp_send_kfunc.c +0 -0
index bb532aa0d1580..9318d4bc7ce8b 100644

[ ... ]

Quoted 25 lines
tools/testing/selftests/bpf/prog_tests/icmp_send_kfunc.c +24 -0
@@ -169,6 +169,49 @@ static void run_icmp_test(struct icmp_send *skel, int af, const char *ip,
+static void run_icmp_no_route_test(struct icmp_send *skel, int af)
+{
+	union {
+		struct ipv4_packet v4;
+		struct ipv6_packet v6;
+	} pkt;
+	DECLARE_LIBBPF_OPTS(bpf_test_run_opts, opts,
+		.data_in = &pkt,
+	);
+	int err;
+
+	switch (af) {
+	case AF_INET:
+		pkt.v4 = pkt_v4;
+		pkt.v4.iph.version = 4;
+		pkt.v4.iph.daddr = htonl(INADDR_LOOPBACK);
+		pkt.v4.tcp.dest = htons(80);
+		opts.data_size_in = sizeof(pkt.v4);
+		skel->bss->unreach_type = ICMP_DEST_UNREACH;
+		break;
+	case AF_INET6:
+		pkt.v6 = pkt_v6;
+		pkt.v6.iph.version = 6;
+		pkt.v6.iph.daddr = in6addr_loopback;

tools/testing/selftests/bpf/prog_tests/icmp_send_kfunc.c static void run_icmp_test(struct icmp_send *skel, int af, const char *ip, · line 202

Quoted 10 lines
tools/testing/selftests/bpf/prog_tests/icmp_send_kfunc.c +10 -0
+		pkt.v6.tcp.dest = htons(80);
+		opts.data_size_in = sizeof(pkt.v6);
+		skel->bss->unreach_type = ICMPV6_DEST_UNREACH;
+		break;
+	default:
+		ASSERT_FAIL("af_not_supported");
+		return;
+	}
+
+	skel->bss->server_port = 80;

[Severity: Low]
Does this leave skel->bss->unreach_code uninitialized for this test?

Since the run_icmp_no_route_test subtests share the same BPF skeleton as the previous run_icmp_test subtests, if they run after the ipv6 subtest, unreach_code is left at 7 (max_code + 1 from testing invalid codes).

Quoted 7 lines

For no_route_ipv6, code 7 is passed to the kernel, which is an invalid ICMPv6 code (max is 6). The test currently passes only because the kernel's bpf_icmp_send implementation checks for a missing destination route and returns early before validating the code parameter.

Would it be better to reset skel->bss->unreach_code to a valid value here to prevent test state pollution?

I'd say it's indeed not a big deal since the test triggers a check that is before it reaches the EINVAL, but would be more theoritically correct to reset to 0 for both v4 and v6. So mostly a nit.

Quoted 12 lines
Quoted 9 lines
tools/testing/selftests/bpf/prog_tests/icmp_send_kfunc.c +8 -0
+	skel->data->kfunc_ret = KFUNC_RET_UNSET;
+
+	err = bpf_prog_test_run_opts(bpf_program__fd(skel->progs.egress), &opts);
+	if (!ASSERT_OK(err, "test_run"))
+		return;
+
+	ASSERT_EQ(skel->data->kfunc_ret, -ENETUNREACH, "kfunc_ret_no_route");
+}
Signature · 1 line
Sashiko AI review · https://sashiko.dev/#/patchset/[email protected]?part=5
Acked-by on v11 5/5
#12 lore raw

Re: [PATCH bpf-next v11 5/5] selftests/bpf: add bpf_icmp_send no route test

In reply to Mahe Tardy
Quoted 10 lines · Mahe Tardy

For normal live cgroup_skb paths, the skb should already be routed. The exception is for test run via BPF_PROG_TEST_RUN with packets created via bpf_prog_test_run_skb. Those lack dst route and thus the icmp_send would quietly fail by returning early.

This test exercises this and makes sure the kfunc returns -ENETUNREACH.

#13 lore raw
In reply to Mahe Tardy
This series was applied to bpf/bpf-next.git (master) by Daniel Borkmann <[email protected]>:

Hello:

This series was applied to bpf/bpf-next.git (master) by Daniel Borkmann <[email protected]>:

Quoted 9 lines · On Thu, 9 Jul 2026 14:48:55 +0000 you wrote:

Hello,

This is v11 of adding the icmp_send kfunc, as suggested during LSF/MM/BPF 2025[^1]. The goal is to allow cgroup_skb programs to actively reject east-west traffic, similarly to what is possible to do with netfilter reject target. Applications can receive early feedback that something went wrong during the TCP handshake.

[...]

Here is the summary with links:
- [bpf-next,v11,1/5] bpf: add bpf_icmp_send kfunc
(no matching commit)
- [bpf-next,v11,2/5] selftests/bpf: add bpf_icmp_send kfunc cgroup_skb tests

    https://git.kernel.org/bpf/bpf-next/c/39b337a3d995

- [bpf-next,v11,3/5] selftests/bpf: add bpf_icmp_send kfunc cgroup_skb IPv6 tests (no matching commit)
- [bpf-next,v11,4/5] selftests/bpf: add bpf_icmp_send recursion test (no matching commit)
- [bpf-next,v11,5/5] selftests/bpf: add bpf_icmp_send no route test (no matching commit)

You are awesome, thank you!

Signature · 2 lines
Deet-doot-dot, I am a bot.
https://korg.docs.kernel.org/patchwork/pwbot.html