Skip to contentSkip to conversation

mm/damon: introduce data attributes only monitoring

RFC PATCH In review SJ Park 2 participants 30 messages Jul 10

Subsystems (4)
lore
Share & tools
lore

SJ Park

author maintainer
#0 lore raw

cover mm/damon: introduce data attributes only monitoring

TL;DR: Introduce a way to get DAMON's best effort accuracy monitoring of user-demanding non-access data attributes.

Background
==========

DAMON was initially designed for only access monitoring. It turned out users want to get the information together with more data attributes. For example, some users want to know how much of a hot memory region belongs to huge pages or specific cgroups. Page level properties based monitoring was introduced with commit 626ffabe67c2 ("mm/damon: clarify trying vs applying on damos_stat kernel-doc comment") to fill the gap. Because it works only at snapshot level and snapshot capturing in the mode can induce high overhead, commit 45c49d9fd608 ("mm/damon/core:
introduce struct damon_probe") introduced data attributes monitoring.

Data attributes monitoring treats the attributes as only additional and subordinate information. Data access monitoring is always turned on, and regions are adjusted for best accuracy of the access information. In some cases, users may be primarily interested in the attributes more than the access. They might even not care about the access information at all. Because DAMON treats data accesses as the only primary information, such users cannot get high quality attributes information.

Design and Implementation
=========================

Introduce another way for treating data attributes as the primary information. Add 'weight' property to each data attribute probe. When any of the weights are set, the mode is enabled. Data access monitoring is completely turned off in the mode. For region adjustment, the weighted sum of probe hit counters is used instead of the nr_accesses.

Using the weights, users can specify to what attributes they are interested in to what degree. DAMON will adjust the regions and provide the best-effort quality monitoring that is optimized for the user demands.

Extend damon_operations for efficient use of probe hits. Update regions merge and kdamond main logic to support the new mode. Add a new struct field and a sysfs file for API callers and ABI users, respectively.

Test
====

On ~7 GiB memory idle system, run a simple AI-assisted program. The program allocates and faults 2 GiB anonymous pages. Then, it does nothing but wait until the user terminates it. Hence, the system ~2 GiB of anonymous pages with no active accesses.

Monitor the distribution of the anonymous pages using DAMON attributes monitoring mode, using DAMON user-space tool, damo [1].

    $ sudo ./damo start --probe_filter allow anon
    $ sudo ./damo report access --dont_merge_regions
    heatmap: 00000000000000000000000000000000000000000000000399999995111111146666666666666666
    # min/max temperatures: -2,470,000,000, -1,620,000,000, column size: 99.800 MiB
    intervals: sample 5 ms aggr 100 ms (max access hz 200)
    #   <start>      <size>       <freq> <age>         <probe hits>
    0   4.000 KiB    79.840 MiB   0 hz   24.700 s      2
    1   79.844 MiB   718.562 MiB  0 hz   24.700 s      8
    2   798.406 MiB  793.148 MiB  0 hz   24.700 s      7
    3   1.554 GiB    797.828 MiB  0 hz   24.700 s      7
    4   2.333 GiB    794.668 MiB  0 hz   24.600 s      8
    5   3.109 GiB    791.117 MiB  0 hz   24.500 s      0
    6   3.882 GiB    785.312 MiB  0 hz   24 s          2
    7   4.649 GiB    787.867 MiB  0 hz   16.200 s      6
    8   5.418 GiB    784.477 MiB  0 hz   23.300 s      6
    9   6.184 GiB    783.820 MiB  0 hz   18.200 s      9
    10  6.950 GiB    797.730 MiB  0 hz   18.900 s      7
    11  7.729 GiB    69.625 MiB   0 hz   18.900 s      0
    memory bw estimate: 0 B per second
    total size: 7.797 GiB
    record DAMON intervals: sample 5 ms, aggr 100 ms

Note that the line after the line starting with "intervals:" is not provided by the current version of 'damo'. I manually added the legends line for easier understanding of these results.

Each of the 12 lines after the legend line shows the DAMON-found regions. Each line shows 1) index of the region, 2) start address of the region, 3) size of the region, 4) access frequency of the region, 5) age (how long the access frequency on the region was kept) of the region, and finally 6) the probe hit count.

Because data access is the primary information that adjusts region for, and there is only nearly zero access on the system, regions are naively adjusted with the same size. Still <probe hits> show different distribution of the anonymous pages, but it is obviously very rough information.

Switch to the attributes only mode and show how it changes the picture:

    $ sudo ./damo tune --probe_filter allow anon --probe_weight 100
    $ sudo ./damo report access --dont_merge_regions
    heatmap: 88888888888888888889888999999889999999000004888888888888889999988888898888888888
    # min/max temperatures: -4,430,000,000, 0, column size: 99.800 MiB
    intervals: sample 5 ms aggr 100 ms (max access hz 200)
    #   <start>      <size>       <freq> <age>         <probe hits>
    0   4.000 KiB    60.445 MiB   0 hz   700 ms        0
    1   60.449 MiB   1.363 MiB    0 hz   600 ms        18
    2   61.812 MiB   144.000 KiB  0 hz   0 ns          1
    3   61.953 MiB   1.922 MiB    0 hz   2.400 s       19
    4   63.875 MiB   12.133 MiB   0 hz   200 ms        0
    [...]
    500 5.132 GiB    8.000 KiB    0 hz   2 m 15.800 s  20
    501 5.132 GiB    8.000 KiB    0 hz   2 m 16.200 s  0
    502 5.132 GiB    16.000 KiB   0 hz   2 m 16.900 s  20
    503 5.132 GiB    24.000 KiB   0 hz   2 m 14.200 s  0
    504 5.132 GiB    8.000 KiB    0 hz   2 m 14.900 s  20
    [...]
    923 7.534 GiB    126.637 MiB  0 hz   0 ns          6
    924 7.658 GiB    252.000 KiB  0 hz   54.800 s      20
    925 7.658 GiB    142.242 MiB  0 hz   300 ms        0
    memory bw estimate: 0 B per second
    total size: 7.797 GiB
    record DAMON intervals: sample 5 ms, aggr 100 ms

As expected, regions are adjusted to provide the best accurate picture for the anonymous pages distribution (<probe hits>). The region 0 (60.445 MiB memory from the address 4.000 KiB) has nearly zero anonymous pages. The region 1 (1.363 MiB memory from the address 60.449 MiB) is nearly full with anonymous pages. Region 500 (8 KiB memory from the address 5.132 GiB) is certainly two anonymous pages.

Future Work
===========

Attributes only monitoring disables access monitoring. We will enable that in future, by extending the supported attributes to include data accesses. This patch series, and the future work are parts of the ongoing project [2] for extending DAMON. The project aims to extend DAMON with primitives other than page table accessed bits such as AMD IBS, Intel PEBS, and Arm SPE, to provide more powerful and detailed information like per-CPUs/threads/reads/writes monitoring.

Patches Sequence
================

Patch 1 introduces damon_probe->weight for specifying the weights of each attribute. Patches 2-6 extends apply_probe() damon_ops callback to efficiently support the new mode. Patch 7 fixes wrong use of abs() in the regions merge code. Patch 8 extends regions merge function to work with probe hits in the mode. Patch 8 also introduces the function for detecting the mode enablement but always returns false, for safe and incremental changes. Patches 9 and 10 adds user parameters validation to prevent theoretical overflow of probe hits and the weighted sum. Patches 11-14 incrementally update kdamond_fn() to support the mode. Patch 15 completes the mode detection function implementation, so that the new mode really works. Patch 16 introduces a new sysfs file for ABI users. Finally, patches 17-19 respectively updates design, usage and ABI documents for the new feature and interfaces.

[1] https://github.com/damonitor/damo
[2] https://lore.kernel.org/[email protected]/

Changelog
=========

Changes from RFCC v1.2
- RFC v1.2: https://lore.kernel.org/[email protected]
- Fix two typos in comments.
Changes from RFC v1.1
- RFC v1.1: https://lore.kernel.org/[email protected]
- Fix typos in comments.
- Fix wrong use of abs() with abs_diff().
- Prevent probe hits and its weighted sum overflow.
Changes from RFC
- RFC: https://lore.kernel.org/[email protected]
- Add kernel-doc comment for damon_probe->weight.
- Fix typos in kernel-doc, design and usage documents.

SJ Park (19):
mm/damon/core: introduce damon_probe->weight mm/damon/core: ask apply_probes() ops callback to set sampling address mm/damon/paddr: set samples in apply_probes() if requested mm/damon/core: ask apply_probe() to return max probe hits weighted sum mm/damon/core: implement damon_probe_hits_wsum() mm/damon/paddr: respect return_max_wsum
mm/damon/core: use abs_diff() instead of abs() mm/damon/core: extend merge function to work with probe hits mm/damon/core: disallow probe_hits overflow on attrs only monitoring mm/damon/core: validate params for probe hits weighted sum overflow mm/damon/core: disable access monitoring when probe weights are set mm/damon/core: set samples in apply_probes() if probe weights are set mm/damon/core: s/max_nr_accesses/max_merge_score/ in kdamond_fn() mm/damon/core: get merge threshold from probe hits when weights are
set
mm/damon/core: implement damon_has_probe_weight() mm/damon/sysfs: implement probe/weight file Docs/mm/damon/design: document attrs-only monitoring Docs/admin-guide/mm/damon/usage: document weight sysfs file Docs/ABI/damon: document probe weight file

 .../ABI/testing/sysfs-kernel-mm-damon         |   6 +
 Documentation/admin-guide/mm/damon/usage.rst  |  11 +-
 Documentation/mm/damon/design.rst             |  25 ++++
 include/linux/damon.h                         |  12 +-
 mm/damon/core.c                               | 139 +++++++++++++++---
 mm/damon/paddr.c                              |  11 +-
 mm/damon/sysfs.c                              |  25 ++++
 mm/damon/tests/core-kunit.h                   |  13 +-
 8 files changed, 217 insertions(+), 25 deletions(-)

base-commit: d86a3e473bc722b6a3dd2583dd4a592a404faac4

Signature · 1 line
2.47.3
author maintainer
#1 lore raw

RFC PATCH 1/19 mm/damon/core: introduce damon_probe->weight

Add a new field, weight to damon_probe struct. The field is used to specify the degree of the API caller's interest to the data attribute of the probe.

---
 include/linux/damon.h | 2 ++
 mm/damon/core.c       | 3 +++
 2 files changed, 5 insertions(+)
include/linux/damon.h +2 -0
index 63f596957c1f1..d8251c83e6e55 100644
@@ -760,10 +760,12 @@ struct damon_filter {
 /**
  * struct damon_probe - Data region attribute probe.
  *
+ * @weight:	Relative priority of the attribute for this probe.
  * @filters:	Filters for assessing if a given region is for this probe.
  * @list:	Siblings list.
  */
 struct damon_probe {
+	unsigned int weight;
 	struct list_head filters;
 	struct list_head list;
 };
mm/damon/core.c +3 -0
index 11473aa1f70f4..327398fa4ee56 100644
@@ -166,6 +166,7 @@ struct damon_probe *damon_new_probe(void)
 	p = kmalloc_obj(*p);
 	if (!p)
 		return NULL;
+	p->weight = 0;
 	INIT_LIST_HEAD(&p->filters);
 	INIT_LIST_HEAD(&p->list);
 	return p;
@@ -1658,6 +1659,7 @@ static int damon_commit_probes(struct damon_ctx *dst, struct damon_ctx *src)
 	damon_for_each_probe_safe(dst_probe, next, dst) {
 		src_probe = damon_nth_probe(i++, src);
 		if (src_probe) {
+			dst_probe->weight = src_probe->weight;
 			err = damon_commit_filters(dst_probe, src_probe);
 			if (err)
 				return err;
@@ -1674,6 +1676,7 @@ static int damon_commit_probes(struct damon_ctx *dst, struct damon_ctx *src)
 		if (!new_probe)
 			return -ENOMEM;
 		damon_add_probe(dst, new_probe);
+		new_probe->weight = src_probe->weight;
 		err = damon_commit_filters(new_probe, src_probe);
 		if (err)
 			return err;
Signature · 1 line
2.47.3
author maintainer
#2 lore raw

RFC PATCH 2/19 mm/damon/core: ask apply_probes() ops callback to set sampling address

In reply to SJ Park

prepare_access_checks() DAMON ops callback sets the monitoring sampling address per region. In future, DAMON will be able to call only apply_probes(). In this case, applyy_probes() may need to do the sampling address setup, to minimize unnecessary regions iteration. Update the protocol for the request.

---
 include/linux/damon.h | 5 +++--
 mm/damon/core.c       | 2 +-
 mm/damon/paddr.c      | 2 +-
 3 files changed, 5 insertions(+), 4 deletions(-)
include/linux/damon.h +3 -2
index d8251c83e6e55..aee28b05acc6c 100644
@@ -647,7 +647,8 @@ enum damon_ops_id {
  * It should also return max number of observed accesses that made as a result
  * of its update.  The value will be used for regions adjustment threshold.
  * @apply_probes should apply the data attribute probes to each region and
- * accordingly update the probe hits counter of the region.
+ * accordingly update the probe hits counter of the region.  It should also
+ * set &damon_region->sampling_addr of each region if ``set_samples`` is true.
  * @get_scheme_score should return the priority score of a region for a scheme
  * as an integer in [0, &DAMOS_MAX_SCORE].
  * @apply_scheme is called from @kdamond when a region for user provided
@@ -665,7 +666,7 @@ struct damon_operations {
 	void (*update)(struct damon_ctx *context);
 	void (*prepare_access_checks)(struct damon_ctx *context);
 	unsigned int (*check_accesses)(struct damon_ctx *context);
-	void (*apply_probes)(struct damon_ctx *context);
+	void (*apply_probes)(struct damon_ctx *context, bool set_samples);
 	int (*get_scheme_score)(struct damon_ctx *context,
 			struct damon_region *r, struct damos *scheme);
 	unsigned long (*apply_scheme)(struct damon_ctx *context,
mm/damon/core.c +1 -1
index 327398fa4ee56..9fbea6204520b 100644
@@ -3692,7 +3692,7 @@ static int kdamond_fn(void *data)
 		if (ctx->ops.check_accesses)
 			max_nr_accesses = ctx->ops.check_accesses(ctx);
 		if (ctx->ops.apply_probes)
-			ctx->ops.apply_probes(ctx);
+			ctx->ops.apply_probes(ctx, false);
 
 		if (time_after_eq(ctx->passed_sample_intervals,
 					next_aggregation_sis)) {
mm/damon/paddr.c +1 -1
index 6172464981730..b13bf7c6eade3 100644
@@ -166,7 +166,7 @@ static bool damon_pa_filter_pass(phys_addr_t pa, struct folio *folio,
 	return pass;
 }
 
-static void damon_pa_apply_probes(struct damon_ctx *ctx)
+static void damon_pa_apply_probes(struct damon_ctx *ctx, bool set_samples)
 {
 	struct damon_target *t;
 	struct damon_region *r;
Signature · 1 line
2.47.3
#3 lore raw

Re: [RFC PATCH v1.3 02/19] mm/damon/core: ask apply_probes() ops callback to set sampling address

Thank you for your contribution! Sashiko AI review found 1 potential issue(s) to consider: - [Medium] The `set_samples` parameter in `damon_pa_apply_probes()` is ignored, failing to set…

Thank you for your contribution! Sashiko AI review found 1 potential issue(s) to consider:
- [Medium] The set_samples parameter in damon_pa_apply_probes() is ignored, failing to set r->sampling_addr when requested. --

--- Patch [2]: [RFC PATCH v1.3 02/19] mm/damon/core: ask apply_probes() ops callback to set sampling address --- commit 5855b0123b327412c4065a90363e8586c4bafda9
Author: SJ Park <[email protected]>

mm/damon/core: ask apply_probes() ops callback to set sampling address

This commit updates the protocol for the DAMON apply_probes callback to accept a boolean set_samples argument. It updates the callback signatures so it can handle sampling address setup in the future to minimize region iteration.

Quoted 4 lines
include/linux/damon.h +0 -0
index d8251c83e6e55..aee28b05acc6c 100644

[ ... ]

Quoted 8 lines
include/linux/damon.h +2 -1
@@ -647,7 +647,8 @@ enum damon_ops_id {
  * It should also return max number of observed accesses that made as a result
  * of its update.  The value will be used for regions adjustment threshold.
  * @apply_probes should apply the data attribute probes to each region and
- * accordingly update the probe hits counter of the region.
+ * accordingly update the probe hits counter of the region.  It should also
+ * set &damon_region->sampling_addr of each region if ``set_samples`` is true.
  * @get_scheme_score should return the priority score of a region for a scheme

[ ... ]

mm/damon/paddr.c static bool damon_pa_filter_pass(phys_addr_t pa, struct folio *folio, · line 172

Quoted 13 lines
mm/damon/paddr.c +1 -1
index 6172464981730..b13bf7c6eade3 100644
@@ -166,7 +166,7 @@ static bool damon_pa_filter_pass(phys_addr_t pa, struct folio *folio,
 	return pass;
 }
 
-static void damon_pa_apply_probes(struct damon_ctx *ctx)
+static void damon_pa_apply_probes(struct damon_ctx *ctx, bool set_samples)
 {
 	struct damon_target *t;
 	struct damon_region *r;

[Severity: Medium]
Does this implementation actually use the new set_samples parameter?

The updated documentation in include/linux/damon.h states that apply_probes should set the region's sampling_addr when set_samples is true, but it appears this parameter is ignored in damon_pa_apply_probes() in mm/damon/paddr.c.

While it is currently called with false from kdamond_fn(), if future code passes true as the docstring suggests is possible, could this result in using a stale or uninitialized address because the API contract is not fulfilled here?

Signature · 1 line
Sashiko AI review · https://sashiko.dev/#/patchset/[email protected]?part=2
author maintainer
#4 lore raw

Re: [RFC PATCH v1.3 02/19] mm/damon/core: ask apply_probes() ops callback to set sampling address

Quoted 55 lines · On Fri, 10 Jul 2026 00:33:27 +0000 [email protected] wrote:

Thank you for your contribution! Sashiko AI review found 1 potential issue(s) to consider:
- [Medium] The set_samples parameter in damon_pa_apply_probes() is ignored, failing to set r->sampling_addr when requested. --

--- Patch [2]: [RFC PATCH v1.3 02/19] mm/damon/core: ask apply_probes() ops callback to set sampling address --- commit 5855b0123b327412c4065a90363e8586c4bafda9
Author: SJ Park <[email protected]>

mm/damon/core: ask apply_probes() ops callback to set sampling address

This commit updates the protocol for the DAMON apply_probes callback to accept a boolean set_samples argument. It updates the callback signatures so it can handle sampling address setup in the future to minimize region iteration.

Quoted 4 lines
include/linux/damon.h +0 -0
index d8251c83e6e55..aee28b05acc6c 100644

[ ... ]

Quoted 8 lines
include/linux/damon.h +2 -1
@@ -647,7 +647,8 @@ enum damon_ops_id {
  * It should also return max number of observed accesses that made as a result
  * of its update.  The value will be used for regions adjustment threshold.
  * @apply_probes should apply the data attribute probes to each region and
- * accordingly update the probe hits counter of the region.
+ * accordingly update the probe hits counter of the region.  It should also
+ * set &damon_region->sampling_addr of each region if ``set_samples`` is true.
  * @get_scheme_score should return the priority score of a region for a scheme

[ ... ]

mm/damon/paddr.c static bool damon_pa_filter_pass(phys_addr_t pa, struct folio *folio, · line 172

Quoted 13 lines
mm/damon/paddr.c +1 -1
index 6172464981730..b13bf7c6eade3 100644
@@ -166,7 +166,7 @@ static bool damon_pa_filter_pass(phys_addr_t pa, struct folio *folio,
 	return pass;
 }
 
-static void damon_pa_apply_probes(struct damon_ctx *ctx)
+static void damon_pa_apply_probes(struct damon_ctx *ctx, bool set_samples)
 {
 	struct damon_target *t;
 	struct damon_region *r;

[Severity: Medium]
Does this implementation actually use the new set_samples parameter?

The updated documentation in include/linux/damon.h states that apply_probes should set the region's sampling_addr when set_samples is true, but it appears this parameter is ignored in damon_pa_apply_probes() in mm/damon/paddr.c.

Quoted 4 lines

While it is currently called with false from kdamond_fn(), if future code passes true as the docstring suggests is possible, could this result in using a stale or uninitialized address because the API contract is not fulfilled here?

Intentional. The later patch of this series implement that.

Quoted 3 lines
Signature · 2 lines
-- 
Sashiko AI review · https://sashiko.dev/#/patchset/[email protected]?part=2

Thanks,
SJ

author maintainer
#5 lore raw

RFC PATCH 3/19 mm/damon/paddr: set samples in apply_probes() if requested

In reply to SJ Park

apply_probe() callback implementation in DAMON_PADDR is ignoring set_samples parameter. Respect it.

---
 mm/damon/paddr.c | 4 ++++
 1 file changed, 4 insertions(+)
mm/damon/paddr.c +4 -0
index b13bf7c6eade3..ff4fcca949660 100644
@@ -178,6 +178,10 @@ static void damon_pa_apply_probes(struct damon_ctx *ctx, bool set_samples)
 			phys_addr_t pa;
 			struct folio *folio;
 
+			if (set_samples)
+				r->sampling_addr = damon_rand(ctx, r->ar.start,
+						r->ar.end);
+
 			pa = damon_pa_phys_addr(r->sampling_addr,
 					ctx->addr_unit);
 			folio = damon_get_folio(PHYS_PFN(pa));
Signature · 1 line
2.47.3
author maintainer
#6 lore raw

RFC PATCH 4/19 mm/damon/core: ask apply_probe() to return max probe hits weighted sum

In reply to SJ Park

check_accesses() DAMON ops callback returns the maximum nr_accesses of regions. DAMON core uses it to calculate a reasonable region merge threshold. The core will need to adjust regions for not nr_accesses but probe hits weighted sum in future. For that, the core needs to know the maximum weighted sum of the regions. Update the protocol for the task.

---
 include/linux/damon.h | 5 ++++-
 mm/damon/core.c       | 2 +-
 mm/damon/paddr.c      | 4 +++-
 3 files changed, 8 insertions(+), 3 deletions(-)
include/linux/damon.h +4 -1
index aee28b05acc6c..e7acd8e610a64 100644
@@ -649,6 +649,8 @@ enum damon_ops_id {
  * @apply_probes should apply the data attribute probes to each region and
  * accordingly update the probe hits counter of the region.  It should also
  * set &damon_region->sampling_addr of each region if ``set_samples`` is true.
+ * It should also return maximum probe hits weighted sum of regions if
+ * ``return_max_wsum`` is true.
  * @get_scheme_score should return the priority score of a region for a scheme
  * as an integer in [0, &DAMOS_MAX_SCORE].
  * @apply_scheme is called from @kdamond when a region for user provided
@@ -666,7 +668,8 @@ struct damon_operations {
 	void (*update)(struct damon_ctx *context);
 	void (*prepare_access_checks)(struct damon_ctx *context);
 	unsigned int (*check_accesses)(struct damon_ctx *context);
-	void (*apply_probes)(struct damon_ctx *context, bool set_samples);
+	unsigned int (*apply_probes)(struct damon_ctx *context,
+			bool set_samples, bool return_max_wsum);
 	int (*get_scheme_score)(struct damon_ctx *context,
 			struct damon_region *r, struct damos *scheme);
 	unsigned long (*apply_scheme)(struct damon_ctx *context,
mm/damon/core.c +1 -1
index 9fbea6204520b..9f6cdd810bd8a 100644
@@ -3692,7 +3692,7 @@ static int kdamond_fn(void *data)
 		if (ctx->ops.check_accesses)
 			max_nr_accesses = ctx->ops.check_accesses(ctx);
 		if (ctx->ops.apply_probes)
-			ctx->ops.apply_probes(ctx, false);
+			ctx->ops.apply_probes(ctx, false, false);
 
 		if (time_after_eq(ctx->passed_sample_intervals,
 					next_aggregation_sis)) {
mm/damon/paddr.c +3 -1
index ff4fcca949660..3eba3564a31fc 100644
@@ -166,7 +166,8 @@ static bool damon_pa_filter_pass(phys_addr_t pa, struct folio *folio,
 	return pass;
 }
 
-static void damon_pa_apply_probes(struct damon_ctx *ctx, bool set_samples)
+static unsigned int damon_pa_apply_probes(struct damon_ctx *ctx,
+		bool set_samples, bool return_max_wsum)
 {
 	struct damon_target *t;
 	struct damon_region *r;
@@ -194,6 +195,7 @@ static void damon_pa_apply_probes(struct damon_ctx *ctx, bool set_samples)
 				folio_put(folio);
 		}
 	}
+	return 0;
 }
 
 /*
Signature · 1 line
2.47.3
author maintainer
#7 lore raw

RFC PATCH 5/19 mm/damon/core: implement damon_probe_hits_wsum()

In reply to SJ Park

When damon_probe->weight is set, the weighted sum of probe hits will be useful. It will be useful for not only the users but also DAMON internal logics like regions merging. Implement a function for calculating it.

---
 include/linux/damon.h |  2 ++
 mm/damon/core.c       | 24 ++++++++++++++++++++++++
 2 files changed, 26 insertions(+)
include/linux/damon.h +2 -0
index e7acd8e610a64..f69442a9d4312 100644
@@ -1012,6 +1012,8 @@ unsigned int damon_nr_accesses_mvsum(struct damon_region *r,
 		struct damon_ctx *ctx);
 unsigned char damon_probe_hits_mvsum(int probe_idx, struct damon_region *r,
 		struct damon_ctx *ctx);
+unsigned int damon_probe_hits_wsum(struct damon_region *r, bool last,
+		struct damon_ctx *ctx);
 
 int damon_set_regions(struct damon_target *t, struct damon_addr_range *ranges,
 		unsigned int nr_ranges, unsigned long min_region_sz);
mm/damon/core.c +24 -0
index 9f6cdd810bd8a..fea97399b5754 100644
@@ -393,6 +393,30 @@ static bool damon_is_last_region(struct damon_region *r,
 	return list_is_last(&r->list, &t->regions_list);
 }
 
+/**
+ * damon_probe_hits_wsum() - Returns probe hits weighted sum of a region.
+ * @r:		region to get the weighted sum of.
+ * @last:	if the request is for last-window aggregated probe hits.
+ * @ctx:	context of &r.
+ *
+ * Return: the weighted sum of probe hits of the region.
+ */
+unsigned int damon_probe_hits_wsum(struct damon_region *r, bool last,
+		struct damon_ctx *ctx)
+{
+	struct damon_probe *probe;
+	unsigned int sum = 0;
+	int i = 0;
+
+	damon_for_each_probe(probe, ctx) {
+		if (last)
+			sum += r->last_probe_hits[i++] * probe->weight;
+		else
+			sum += r->probe_hits[i++] * probe->weight;
+	}
+	return sum;
+}
+
 /*
  * Check whether a region is intersecting an address range
  *
Signature · 1 line
2.47.3
author maintainer
#8 lore raw

RFC PATCH 6/19 mm/damon/paddr: respect return_max_wsum

In reply to SJ Park

apply_probes() ops implementation in DAMON_PADDR is ignoring return_max_wsum. Respect it.

---
 mm/damon/paddr.c | 7 +++++--
 1 file changed, 5 insertions(+), 2 deletions(-)
mm/damon/paddr.c +5 -2
index 3eba3564a31fc..b85f88a7a38f4 100644
@@ -172,6 +172,7 @@ static unsigned int damon_pa_apply_probes(struct damon_ctx *ctx,
 	struct damon_target *t;
 	struct damon_region *r;
 	struct damon_probe *p;
+	unsigned int max_wsum = 0;
 
 	damon_for_each_target(t, ctx) {
 		damon_for_each_region(r, t) {
@@ -182,7 +183,6 @@ static unsigned int damon_pa_apply_probes(struct damon_ctx *ctx,
 			if (set_samples)
 				r->sampling_addr = damon_rand(ctx, r->ar.start,
 						r->ar.end);
-
 			pa = damon_pa_phys_addr(r->sampling_addr,
 					ctx->addr_unit);
 			folio = damon_get_folio(PHYS_PFN(pa));
@@ -193,9 +193,12 @@ static unsigned int damon_pa_apply_probes(struct damon_ctx *ctx,
 			}
 			if (folio)
 				folio_put(folio);
+			if (return_max_wsum)
+				max_wsum = max(damon_probe_hits_wsum(r, false,
+							ctx), max_wsum);
 		}
 	}
-	return 0;
+	return max_wsum;
 }
 
 /*
Signature · 1 line
2.47.3
author maintainer
#9 lore raw

RFC PATCH 7/19 mm/damon/core: use abs_diff() instead of abs()

In reply to SJ Park

Use of abs() in damon_merge_regions_of() could cause a silent integer overflow since the macro casts unsigned int to signed int. It is unlikely to have such a large value for nr_accesses. Even though it happens, the user impact is just degraded monitoring results. Users showing bad monitoring results for weird setup is quite trivial. But the code is obviously wrong. Use abs_diff() instead.

The issue was discovered [1] by Sashiko.

[1] https://lore.kernel.org/[email protected]/

---
 mm/damon/core.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
mm/damon/core.c +2 -2
index fea97399b5754..4c7e8a12a9b67 100644
@@ -3261,7 +3261,7 @@ static void damon_merge_regions_of(struct damon_target *t, unsigned int thres,
 	struct damon_region *r, *prev = NULL, *next;
 
 	damon_for_each_region_safe(r, next, t) {
-		if (abs(r->nr_accesses - r->last_nr_accesses) > thres)
+		if (abs_diff(r->nr_accesses, r->last_nr_accesses) > thres)
 			r->age = 0;
 		else if ((r->nr_accesses == 0) != (r->last_nr_accesses == 0))
 			r->age = 0;
@@ -3269,7 +3269,7 @@ static void damon_merge_regions_of(struct damon_target *t, unsigned int thres,
 			r->age++;
 
 		if (prev && prev->ar.end == r->ar.start &&
-		    abs(prev->nr_accesses - r->nr_accesses) <= thres &&
+		    abs_diff(prev->nr_accesses, r->nr_accesses) <= thres &&
 		    damon_sz_region(prev) + damon_sz_region(r) <= sz_limit)
 			damon_merge_two_regions(t, prev, r);
 		else
Signature · 1 line
2.47.3
author maintainer
#10 lore raw

RFC PATCH 8/19 mm/damon/core: extend merge function to work with probe hits

In reply to SJ Park

When probe weights are set, users may want DAMON monitoring results to be optimized for the weights. For that, regions adjustment should work for the weighted sum of probe hits. Extend damon_merge_regions_of() to detect if the weights are set, and work with probe hits in the case.

The weights setup detection function is incomplete. It always returns false. It is intentional, so that more changes to completely support weights can be made in an incremental but safe way. Until the function is completed, all changes depend on it is no-op, so DAMON works in the current mode.

---
 mm/damon/core.c             | 49 +++++++++++++++++++++++++++++--------
 mm/damon/tests/core-kunit.h | 13 ++++++++--
 2 files changed, 50 insertions(+), 12 deletions(-)
mm/damon/core.c +39 -10
index 4c7e8a12a9b67..7d49420ea26c4 100644
@@ -209,6 +209,11 @@ static struct damon_probe *damon_nth_probe(int n, struct damon_ctx *ctx)
 	return NULL;
 }
 
+static bool damon_has_probe_weights(struct damon_ctx *c)
+{
+	return false;
+}
+
 /*
  * damon_mvsum() - Returns pseudo moving sum value for a time window.
  * @current_nr:		The value of the current aggregation window.
@@ -3248,6 +3253,16 @@ static void damon_merge_two_regions(struct damon_target *t,
 	damon_destroy_region(r, t);
 }
 
+static unsigned int damon_merge_score(struct damon_region *r, bool last,
+		struct damon_ctx *ctx, bool use_probe_hits)
+{
+	if (use_probe_hits)
+		return damon_probe_hits_wsum(r, last, ctx);
+	if (last)
+		return r->last_nr_accesses;
+	return r->nr_accesses;
+}
+
 /*
  * Merge adjacent regions having similar access frequencies
  *
@@ -3256,24 +3271,38 @@ static void damon_merge_two_regions(struct damon_target *t,
  * sz_limit	size upper limit of each region
  */
 static void damon_merge_regions_of(struct damon_target *t, unsigned int thres,
-				   unsigned long sz_limit)
+		unsigned long sz_limit, struct damon_ctx *ctx)
 {
 	struct damon_region *r, *prev = NULL, *next;
+	bool use_probe_hits = damon_has_probe_weights(ctx);
 
 	damon_for_each_region_safe(r, next, t) {
-		if (abs_diff(r->nr_accesses, r->last_nr_accesses) > thres)
+		unsigned int score, last_score, diff;
+
+		score = damon_merge_score(r, false, ctx, use_probe_hits);
+		last_score = damon_merge_score(r, true, ctx, use_probe_hits);
+
+		if (abs_diff(score, last_score) > thres)
 			r->age = 0;
-		else if ((r->nr_accesses == 0) != (r->last_nr_accesses == 0))
+		else if ((score == 0) != (last_score == 0))
 			r->age = 0;
 		else
 			r->age++;
 
-		if (prev && prev->ar.end == r->ar.start &&
-		    abs_diff(prev->nr_accesses, r->nr_accesses) <= thres &&
-		    damon_sz_region(prev) + damon_sz_region(r) <= sz_limit)
-			damon_merge_two_regions(t, prev, r);
-		else
-			prev = r;
+		if (!prev)
+			goto set_prev_continue;
+		if (prev->ar.end != r->ar.start)
+			goto set_prev_continue;
+		diff = abs_diff(score, damon_merge_score(prev, false, ctx,
+					use_probe_hits));
+		if (diff > thres)
+			goto set_prev_continue;
+		if (damon_sz_region(prev) + damon_sz_region(r) > sz_limit)
+			goto set_prev_continue;
+		damon_merge_two_regions(t, prev, r);
+		continue;
+set_prev_continue:
+		prev = r;
 	}
 }
 
@@ -3306,7 +3335,7 @@ static void kdamond_merge_regions(struct damon_ctx *c, unsigned int threshold,
 	do {
 		nr_regions = 0;
 		damon_for_each_target(t, c) {
-			damon_merge_regions_of(t, threshold, sz_limit);
+			damon_merge_regions_of(t, threshold, sz_limit, c);
 			nr_regions += damon_nr_regions(t);
 		}
 		threshold = max(1, threshold * 2);
mm/damon/tests/core-kunit.h +11 -2
index d97280270c27b..6ad73559dd8ea 100644
@@ -226,6 +226,7 @@ static struct damon_region *__nth_region_of(struct damon_target *t, int idx)
 
 static void damon_test_merge_regions_of(struct kunit *test)
 {
+	struct damon_ctx *ctx;
 	struct damon_target *t;
 	struct damon_region *r;
 	unsigned long sa[] = {0, 100, 114, 122, 130, 156, 170, 184, 230};
@@ -236,20 +237,27 @@ static void damon_test_merge_regions_of(struct kunit *test)
 	unsigned long eaddrs[] = {112, 130, 156, 170, 230, 10170};
 	int i;
 
+	ctx = damon_new_ctx();
+	if (!ctx)
+		kunit_skip(test, "ctx alloc fail");
+
 	t = damon_new_target();
-	if (!t)
+	if (!t) {
+		damon_destroy_ctx(ctx);
 		kunit_skip(test, "target alloc fail");
+	}
 	for (i = 0; i < ARRAY_SIZE(sa); i++) {
 		r = damon_new_region(sa[i], ea[i]);
 		if (!r) {
 			damon_free_target(t);
+			damon_destroy_ctx(ctx);
 			kunit_skip(test, "region alloc fail");
 		}
 		r->nr_accesses = nrs[i];
 		damon_add_region(r, t);
 	}
 
-	damon_merge_regions_of(t, 9, 9999);
+	damon_merge_regions_of(t, 9, 9999, ctx);
 	/* 0-112, 114-130, 130-156, 156-170, 170-230, 230-10170 */
 	KUNIT_EXPECT_EQ(test, damon_nr_regions(t), 6u);
 	for (i = 0; i < 6; i++) {
@@ -258,6 +266,7 @@ static void damon_test_merge_regions_of(struct kunit *test)
 		KUNIT_EXPECT_EQ(test, r->ar.end, eaddrs[i]);
 	}
 	damon_free_target(t);
+	damon_destroy_ctx(ctx);
 }
 
 static void damon_test_split_regions_of(struct kunit *test)
Signature · 1 line
2.47.3
author maintainer
#11 lore raw

RFC PATCH 9/19 mm/damon/core: disallow probe_hits overflow on attrs only monitoring

In reply to SJ Park

When any damon_probe->weight is set, DAMON will do only probe monitoring. probe_hits is 'unsigned char'. It could overflow when the aggregation interval is larger than the sampling interval times 256. damon_as_probe_weights() always return false, so such overflow cannot happen. Even if it happens, it only degrades the monitoring results.

That said, the overflow is not intentional. It is better to be prevented as long as the cost is not expensive. Disallow the overflow by adding a validation logic on the core layer parameters validation function.

---
 mm/damon/core.c | 16 ++++++++++++++++
 1 file changed, 16 insertions(+)
mm/damon/core.c +16 -0
index 7d49420ea26c4..4f1425e56950b 100644
@@ -1332,6 +1332,19 @@ static void damos_set_filters_default_reject(struct damos *s)
 		damos_filters_default_reject(&s->ops_filters);
 }
 
+static bool damon_valid_probe_params(struct damon_ctx *ctx)
+{
+	unsigned long sample_interval;
+
+	if (!damon_has_probe_weights(ctx))
+		return true;
+
+	sample_interval = ctx->attrs.sample_interval ? : 1;
+	if (ctx->attrs.aggr_interval / sample_interval > U8_MAX)
+		return false;
+	return true;
+}
+
 /*
  * damos_commit_dests() - Copy migration destinations from @src to @dst.
  * @dst:	Destination structure to update.
@@ -1736,6 +1749,9 @@ static int __damon_commit_ctx(struct damon_ctx *dst, struct damon_ctx *src)
 		}
 	}
 
+	if (!damon_valid_probe_params(src))
+		return -EINVAL;
+
 	err = damon_commit_schemes(dst, src);
 	if (err)
 		return err;
Signature · 1 line
2.47.3
#12 lore raw

Re: [RFC PATCH v1.3 09/19] mm/damon/core: disallow probe_hits overflow on attrs only monitoring

Thank you for your contribution! Sashiko AI review found 1 potential issue(s) to consider: - [Medium] Missing validation in `damon_valid_probe_params()` fails to prevent a 32-bit integer overflow of…

Thank you for your contribution! Sashiko AI review found 1 potential issue(s) to consider:
- [Medium] Missing validation in damon_valid_probe_params() fails to prevent a 32-bit integer overflow of the weighted sum of probe hits. --

--- Patch [9]: [RFC PATCH v1.3 09/19] mm/damon/core: disallow probe_hits overflow on attrs only monitoring --- commit c184df8a3c8632af7a06675128fa4e375050fa8c
Author: SJ Park <[email protected]>
Subject: mm/damon/core: disallow probe_hits overflow on attrs only monitoring

This commit adds validation logic to prevent an 8-bit overflow of probe_hits when the aggregation interval is much larger than the sampling interval. It checks the parameters in a new function, damon_valid_probe_params().

Quoted 4 lines
mm/damon/core.c +0 -0
index 7d49420ea26c4..4f1425e56950b 100644

[ ... ]

Quoted 6 lines
mm/damon/core.c +2 -0
@@ -1332,6 +1332,19 @@ static void damos_set_filters_default_reject(struct damos *s)
 		damos_filters_default_reject(&s->ops_filters);
 }
 
+static bool damon_valid_probe_params(struct damon_ctx *ctx)
+{

mm/damon/core.c static void damos_set_filters_default_reject(struct damos *s) · line 1346

Quoted 10 lines
mm/damon/core.c +10 -0
+	unsigned long sample_interval;
+
+	if (!damon_has_probe_weights(ctx))
+		return true;
+
+	sample_interval = ctx->attrs.sample_interval ? : 1;
+	if (ctx->attrs.aggr_interval / sample_interval > U8_MAX)
+		return false;
+	return true;
+}

[Severity: Medium]
Since we are adding validation for the 8-bit probe_hits overflow here, should we also validate that the 32-bit weighted sum of probe hits doesn't overflow?

If a DAMON context is configured with probes where probe->weight is large enough, probe->weight * max_probe_hits (up to 255) could exceed UINT_MAX, or their cumulative sum could overflow. This would result in an incorrect score being returned by damon_probe_hits_wsum(), causing improper region merges in damon_merge_regions_of() and degrading monitoring accuracy.

While damon_has_probe_weights() currently returns false making this path unreachable, would it be safer to add the weighted sum overflow check now to prevent issues when probe weights are fully implemented?

Signature · 1 line
Sashiko AI review · https://sashiko.dev/#/patchset/[email protected]?part=9
author maintainer
#13 lore raw

Re: [RFC PATCH v1.3 09/19] mm/damon/core: disallow probe_hits overflow on attrs only monitoring

Quoted 47 lines · On Fri, 10 Jul 2026 00:42:35 +0000 [email protected] wrote:

Thank you for your contribution! Sashiko AI review found 1 potential issue(s) to consider:
- [Medium] Missing validation in damon_valid_probe_params() fails to prevent a 32-bit integer overflow of the weighted sum of probe hits. --

--- Patch [9]: [RFC PATCH v1.3 09/19] mm/damon/core: disallow probe_hits overflow on attrs only monitoring --- commit c184df8a3c8632af7a06675128fa4e375050fa8c
Author: SJ Park <[email protected]>
Subject: mm/damon/core: disallow probe_hits overflow on attrs only monitoring

This commit adds validation logic to prevent an 8-bit overflow of probe_hits when the aggregation interval is much larger than the sampling interval. It checks the parameters in a new function, damon_valid_probe_params().

Quoted 4 lines
mm/damon/core.c +0 -0
index 7d49420ea26c4..4f1425e56950b 100644

[ ... ]

Quoted 6 lines
mm/damon/core.c +2 -0
@@ -1332,6 +1332,19 @@ static void damos_set_filters_default_reject(struct damos *s)
 		damos_filters_default_reject(&s->ops_filters);
 }
 
+static bool damon_valid_probe_params(struct damon_ctx *ctx)
+{

mm/damon/core.c static void damos_set_filters_default_reject(struct damos *s) · line 1346

Quoted 10 lines
mm/damon/core.c +10 -0
+	unsigned long sample_interval;
+
+	if (!damon_has_probe_weights(ctx))
+		return true;
+
+	sample_interval = ctx->attrs.sample_interval ? : 1;
+	if (ctx->attrs.aggr_interval / sample_interval > U8_MAX)
+		return false;
+	return true;
+}

[Severity: Medium]
Since we are adding validation for the 8-bit probe_hits overflow here, should we also validate that the 32-bit weighted sum of probe hits doesn't overflow?

If a DAMON context is configured with probes where probe->weight is large enough, probe->weight * max_probe_hits (up to 255) could exceed UINT_MAX, or their cumulative sum could overflow. This would result in an incorrect score being returned by damon_probe_hits_wsum(), causing improper region merges in damon_merge_regions_of() and degrading monitoring accuracy.

Quoted 3 lines

While damon_has_probe_weights() currently returns false making this path unreachable, would it be safer to add the weighted sum overflow check now to prevent issues when probe weights are fully implemented?

That's exactly what the next patch of this series is doing.

Quoted 3 lines
Signature · 2 lines
-- 
Sashiko AI review · https://sashiko.dev/#/patchset/[email protected]?part=9

Thanks,
SJ

author maintainer
#14 lore raw

RFC PATCH 10/19 mm/damon/core: validate params for probe hits weighted sum overflow

In reply to SJ Park

damon_probe_hits_wsum() could overflow in weird setups. Users could set the weight unreasonably high. They could also set the aggregation interval unreasonably high compared to the sampling interval. Such user setup is unlikely. Even if such setup is used, damon_has_probe_weights() always returns false, so the overflow cannot happen. The function may be completed in future, though. Even if the overflow happens, the consequence is degraded monitoring results for the unreasonable setup. It is just a trivial user experience issue.

It is still better to be prevented unless the cost is expensive. Avoid the overflow by adding the parameter validation in the core layer parameters validation function.

---
 mm/damon/core.c | 15 +++++++++++++++
 1 file changed, 15 insertions(+)
mm/damon/core.c +15 -0
index 4f1425e56950b..a0e6a5129fbf3 100644
@@ -1335,6 +1335,9 @@ static void damos_set_filters_default_reject(struct damos *s)
 static bool damon_valid_probe_params(struct damon_ctx *ctx)
 {
 	unsigned long sample_interval;
+	unsigned char max_probe_hits;
+	struct damon_probe *probe;
+	unsigned int wsum, wsum_to_add;
 
 	if (!damon_has_probe_weights(ctx))
 		return true;
@@ -1342,6 +1345,18 @@ static bool damon_valid_probe_params(struct damon_ctx *ctx)
 	sample_interval = ctx->attrs.sample_interval ? : 1;
 	if (ctx->attrs.aggr_interval / sample_interval > U8_MAX)
 		return false;
+
+	/* invalid if probe hits weighted sum can overflow */
+	max_probe_hits = damon_nr_samples_per_aggr(&ctx->attrs);
+	wsum = 0;
+	damon_for_each_probe(probe, ctx) {
+		if (probe->weight > UINT_MAX / max_probe_hits)
+			return false;
+		wsum_to_add = probe->weight * max_probe_hits;
+		if (UINT_MAX - wsum < wsum_to_add)
+			return false;
+		wsum += wsum_to_add;
+	}
 	return true;
 }
 
Signature · 1 line
2.47.3
author maintainer
#15 lore raw

RFC PATCH 11/19 mm/damon/core: disable access monitoring when probe weights are set

In reply to SJ Park

When users set probe weights, they are interested in the data attributes. Not necessarily they are interested in data access patterns. Disable the data access monitoring in the case.

---
 mm/damon/core.c | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)
mm/damon/core.c +3 -2
index a0e6a5129fbf3..65f91e3b58d2e 100644
@@ -3763,17 +3763,18 @@ static int kdamond_fn(void *data)
 		unsigned long next_aggregation_sis = ctx->next_aggregation_sis;
 		unsigned long next_ops_update_sis = ctx->next_ops_update_sis;
 		unsigned long sample_interval = ctx->attrs.sample_interval;
+		bool access_check_disabled = damon_has_probe_weights(ctx);
 
 		if (kdamond_wait_activation(ctx))
 			break;
 
-		if (ctx->ops.prepare_access_checks)
+		if (!access_check_disabled && ctx->ops.prepare_access_checks)
 			ctx->ops.prepare_access_checks(ctx);
 
 		kdamond_usleep(sample_interval);
 		ctx->passed_sample_intervals++;
 
-		if (ctx->ops.check_accesses)
+		if (!access_check_disabled && ctx->ops.check_accesses)
 			max_nr_accesses = ctx->ops.check_accesses(ctx);
 		if (ctx->ops.apply_probes)
 			ctx->ops.apply_probes(ctx, false, false);
Signature · 1 line
2.47.3
#16 lore raw

Re: [RFC PATCH v1.3 11/19] mm/damon/core: disable access monitoring when probe weights are set

Thank you for your contribution! Sashiko AI review found 3 potential issue(s) to consider: - [Medium] Skipping `check_accesses()` leaves `max_nr_accesses` stale or zero, permanently breaking the…

Thank you for your contribution! Sashiko AI review found 3 potential issue(s) to consider:
- [Medium] Skipping check_accesses() leaves max_nr_accesses stale or zero, permanently breaking the region merging heuristic and causing unbounded region growth.
- [Medium] Skipping prepare_access_checks() leaves r->sampling_addr uninitialized, leading to arbitrary physical memory reads.
- [Medium] Configuring probe weights on operations that do not support them (e.g., VADDR) breaks the monitoring context completely.
--

--- Patch [11]: [RFC PATCH v1.3 11/19] mm/damon/core: disable access monitoring when probe weights are set --- commit 156f6c878eae64d06c0b181a333eb7acd3bfbbf6
Author: SJ Park <[email protected]>

mm/damon/core: disable access monitoring when probe weights are set

When users set probe weights, they are interested in the data attributes. Not necessarily they are interested in data access patterns. Disable the data access monitoring in the case.

Quoted 5 lines
mm/damon/core.c +0 -0
index a0e6a5129fbf3..65f91e3b58d2e 100644

mm/damon/core.c static int kdamond_fn(void *data) · line 3771

Quoted 10 lines
mm/damon/core.c +2 -1
@@ -3763,17 +3763,18 @@ static int kdamond_fn(void *data)
 		unsigned long next_aggregation_sis = ctx->next_aggregation_sis;
 		unsigned long next_ops_update_sis = ctx->next_ops_update_sis;
 		unsigned long sample_interval = ctx->attrs.sample_interval;
+		bool access_check_disabled = damon_has_probe_weights(ctx);
 
 		if (kdamond_wait_activation(ctx))
 			break;
 
-		if (ctx->ops.prepare_access_checks)
+		if (!access_check_disabled && ctx->ops.prepare_access_checks)

[Severity: Medium]
Does skipping ctx->ops.prepare_access_checks() leave the sampling_addr field uninitialized?

If access_check_disabled evaluates to true, prepare_access_checks() is skipped. The region object allocated by damon_new_region() leaves this field uninitialized:

mm/damon/core.c:damon_new_region() {
    ...
    region = kmem_cache_alloc(damon_region_cache, GFP_KERNEL);
    if (!region)
        return NULL;

    region->ar.start = start;
    region->ar.end = end;
    region->nr_accesses = 0;
    ...
}

Then apply_probes(ctx, false, false) is called below with set_samples as false. Could damon_pa_apply_probes() read the uninitialized sampling_addr to generate a physical address, leading to arbitrary physical memory reads?

mm/damon/core.c static int kdamond_fn(void *data) · line 3778

Quoted 8 lines
mm/damon/core.c +1 -1
 			ctx->ops.prepare_access_checks(ctx);
 
 		kdamond_usleep(sample_interval);
 		ctx->passed_sample_intervals++;
 
-		if (ctx->ops.check_accesses)
+		if (!access_check_disabled && ctx->ops.check_accesses)
 			max_nr_accesses = ctx->ops.check_accesses(ctx);

[Severity: Medium]
Will skipping check_accesses() leave max_nr_accesses stale or zero?

If access_check_disabled is true, check_accesses() is skipped, and apply_probes is called with return_max_wsum as false, so its return value is ignored. Could this pass a stale max_nr_accesses into kdamond_merge_regions(), preventing adjacent regions evaluated by large weighted sums from ever merging and causing runaway region fragmentation?

[Severity: Medium]
What happens if probe weights are configured for operations that do not support them?

If access_check_disabled evaluates to true because probe weights are set, this skips check_accesses(). Because ctx->ops.apply_probes would be NULL for operations like vaddr, it is also skipped.

Does damon_valid_probe_params() need to reject configurations where ctx->ops.apply_probes is NULL to prevent the context from silently skipping all data gathering?

Quoted 2 lines
mm/damon/core.c +0 -0
 		if (ctx->ops.apply_probes)
 			ctx->ops.apply_probes(ctx, false, false);
Signature · 1 line
Sashiko AI review · https://sashiko.dev/#/patchset/[email protected]?part=11
author maintainer
#17 lore raw

Re: [RFC PATCH v1.3 11/19] mm/damon/core: disable access monitoring when probe weights are set

Quoted 52 lines · On Fri, 10 Jul 2026 00:43:26 +0000 [email protected] wrote:

Thank you for your contribution! Sashiko AI review found 3 potential issue(s) to consider:
- [Medium] Skipping check_accesses() leaves max_nr_accesses stale or zero, permanently breaking the region merging heuristic and causing unbounded region growth.
- [Medium] Skipping prepare_access_checks() leaves r->sampling_addr uninitialized, leading to arbitrary physical memory reads.
- [Medium] Configuring probe weights on operations that do not support them (e.g., VADDR) breaks the monitoring context completely.
--

--- Patch [11]: [RFC PATCH v1.3 11/19] mm/damon/core: disable access monitoring when probe weights are set --- commit 156f6c878eae64d06c0b181a333eb7acd3bfbbf6
Author: SJ Park <[email protected]>

mm/damon/core: disable access monitoring when probe weights are set

When users set probe weights, they are interested in the data attributes. Not necessarily they are interested in data access patterns. Disable the data access monitoring in the case.

Quoted 5 lines
mm/damon/core.c +0 -0
index a0e6a5129fbf3..65f91e3b58d2e 100644

mm/damon/core.c static int kdamond_fn(void *data) · line 3771

Quoted 10 lines
mm/damon/core.c +2 -1
@@ -3763,17 +3763,18 @@ static int kdamond_fn(void *data)
 		unsigned long next_aggregation_sis = ctx->next_aggregation_sis;
 		unsigned long next_ops_update_sis = ctx->next_ops_update_sis;
 		unsigned long sample_interval = ctx->attrs.sample_interval;
+		bool access_check_disabled = damon_has_probe_weights(ctx);
 
 		if (kdamond_wait_activation(ctx))
 			break;
 
-		if (ctx->ops.prepare_access_checks)
+		if (!access_check_disabled && ctx->ops.prepare_access_checks)

[Severity: Medium]
Does skipping ctx->ops.prepare_access_checks() leave the sampling_addr field uninitialized?

If access_check_disabled evaluates to true, prepare_access_checks() is skipped. The region object allocated by damon_new_region() leaves this field uninitialized:

mm/damon/core.c:damon_new_region() {
    ...
    region = kmem_cache_alloc(damon_region_cache, GFP_KERNEL);
    if (!region)
        return NULL;

    region->ar.start = start;
    region->ar.end = end;
    region->nr_accesses = 0;
    ...
}
Quoted 3 lines

Then apply_probes(ctx, false, false) is called below with set_samples as false. Could damon_pa_apply_probes() read the uninitialized sampling_addr to generate a physical address, leading to arbitrary physical memory reads?

No issue. access_check_disabled is always false for now.

Quoted 13 lines

mm/damon/core.c static int kdamond_fn(void *data) · line 3778

Quoted 9 lines
mm/damon/core.c +1 -1
 			ctx->ops.prepare_access_checks(ctx);
 
 		kdamond_usleep(sample_interval);
 		ctx->passed_sample_intervals++;
 
-		if (ctx->ops.check_accesses)
+		if (!access_check_disabled && ctx->ops.check_accesses)
 			max_nr_accesses = ctx->ops.check_accesses(ctx);

[Severity: Medium]
Will skipping check_accesses() leave max_nr_accesses stale or zero?

Quoted 5 lines

If access_check_disabled is true, check_accesses() is skipped, and apply_probes is called with return_max_wsum as false, so its return value is ignored. Could this pass a stale max_nr_accesses into kdamond_merge_regions(), preventing adjacent regions evaluated by large weighted sums from ever merging and causing runaway region fragmentation?

No issue. access_check_disabled is always false for now.

Quoted 6 lines

[Severity: Medium]
What happens if probe weights are configured for operations that do not support them?

Quoted 7 lines

If access_check_disabled evaluates to true because probe weights are set, this skips check_accesses(). Because ctx->ops.apply_probes would be NULL for operations like vaddr, it is also skipped.

Does damon_valid_probe_params() need to reject configurations where ctx->ops.apply_probes is NULL to prevent the context from silently skipping all data gathering?

No issue. access_check_disabled is always false for now. Even if it can be true, that is the intended behavior.

Quoted 6 lines
Quoted 3 lines
mm/damon/core.c +0 -0
 		if (ctx->ops.apply_probes)
 			ctx->ops.apply_probes(ctx, false, false);
Signature · 1 line
Sashiko AI review · https://sashiko.dev/#/patchset/[email protected]?part=11

Thanks,
SJ

author maintainer
#18 lore raw

RFC PATCH 12/19 mm/damon/core: set samples in apply_probes() if probe weights are set

In reply to SJ Park

When probe weights are set, the prepare_access_checks() ops callback is not invoked, so sampling addresses of regions are unset. Ask apply_probes() to set those together in the case.

---
 mm/damon/core.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)
mm/damon/core.c +2 -1
index 65f91e3b58d2e..dd0612e1a408b 100644
@@ -3777,7 +3777,8 @@ static int kdamond_fn(void *data)
 		if (!access_check_disabled && ctx->ops.check_accesses)
 			max_nr_accesses = ctx->ops.check_accesses(ctx);
 		if (ctx->ops.apply_probes)
-			ctx->ops.apply_probes(ctx, false, false);
+			ctx->ops.apply_probes(ctx, access_check_disabled,
+					false);
 
 		if (time_after_eq(ctx->passed_sample_intervals,
 					next_aggregation_sis)) {
Signature · 1 line
2.47.3
author maintainer
#19 lore raw

RFC PATCH 13/19 mm/damon/core: s/max_nr_accesses/max_merge_score/ in kdamond_fn()

In reply to SJ Park

When probe weights are set, DAMON merge logic works with the probe hits weighted sum. The core logic is setting the merge threshold based on the access frequency, though. Before using probe hits based threshold, rename the variables to look more general.

---
 mm/damon/core.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)
mm/damon/core.c +3 -3
index dd0612e1a408b..f7782c69037da 100644
@@ -3730,7 +3730,6 @@ static void kdamond_init_ctx(struct damon_ctx *ctx)
 static int kdamond_fn(void *data)
 {
 	struct damon_ctx *ctx = data;
-	unsigned int max_nr_accesses = 0;
 	unsigned long sz_limit = 0;
 
 	pr_debug("kdamond (%d) starts\n", current->pid);
@@ -3764,6 +3763,7 @@ static int kdamond_fn(void *data)
 		unsigned long next_ops_update_sis = ctx->next_ops_update_sis;
 		unsigned long sample_interval = ctx->attrs.sample_interval;
 		bool access_check_disabled = damon_has_probe_weights(ctx);
+		unsigned int max_merge_score = 0;
 
 		if (kdamond_wait_activation(ctx))
 			break;
@@ -3775,7 +3775,7 @@ static int kdamond_fn(void *data)
 		ctx->passed_sample_intervals++;
 
 		if (!access_check_disabled && ctx->ops.check_accesses)
-			max_nr_accesses = ctx->ops.check_accesses(ctx);
+			max_merge_score = ctx->ops.check_accesses(ctx);
 		if (ctx->ops.apply_probes)
 			ctx->ops.apply_probes(ctx, access_check_disabled,
 					false);
@@ -3783,7 +3783,7 @@ static int kdamond_fn(void *data)
 		if (time_after_eq(ctx->passed_sample_intervals,
 					next_aggregation_sis)) {
 			kdamond_merge_regions(ctx,
-					max_nr_accesses / 10,
+					max_merge_score / 10,
 					sz_limit);
 			/* online updates might be made */
 			sz_limit = damon_apply_min_nr_regions(ctx);
Signature · 1 line
2.47.3
author maintainer
#20 lore raw

RFC PATCH 14/19 mm/damon/core: get merge threshold from probe hits when weights are set

In reply to SJ Park

When probe weights are set, DAMON merges regions based on their probe hits weighted sum. But the merge threshold is calculated based on the access frequency. Update it to retrieve the maximum probe hits weighted sum in the snapshot from apply_probes() ops callback, and generate the threshold based on it.

---
 mm/damon/core.c | 18 ++++++++++++++----
 1 file changed, 14 insertions(+), 4 deletions(-)
mm/damon/core.c +14 -4
index f7782c69037da..91964336ce31e 100644
@@ -3763,7 +3763,8 @@ static int kdamond_fn(void *data)
 		unsigned long next_ops_update_sis = ctx->next_ops_update_sis;
 		unsigned long sample_interval = ctx->attrs.sample_interval;
 		bool access_check_disabled = damon_has_probe_weights(ctx);
-		unsigned int max_merge_score = 0;
+		unsigned int max_merge_score = 0, max_wsum;
+		bool get_max_wsum;
 
 		if (kdamond_wait_activation(ctx))
 			break;
@@ -3776,9 +3777,18 @@ static int kdamond_fn(void *data)
 
 		if (!access_check_disabled && ctx->ops.check_accesses)
 			max_merge_score = ctx->ops.check_accesses(ctx);
-		if (ctx->ops.apply_probes)
-			ctx->ops.apply_probes(ctx, access_check_disabled,
-					false);
+		if (ctx->ops.apply_probes) {
+			if (time_after_eq(ctx->passed_sample_intervals,
+						next_aggregation_sis) &&
+					access_check_disabled)
+				get_max_wsum = true;
+			else
+				get_max_wsum = false;
+			max_wsum = ctx->ops.apply_probes(ctx,
+					access_check_disabled, get_max_wsum);
+			if (get_max_wsum)
+				max_merge_score = max_wsum;
+		}
 
 		if (time_after_eq(ctx->passed_sample_intervals,
 					next_aggregation_sis)) {
Signature · 1 line
2.47.3
#21 lore raw

Re: [RFC PATCH v1.3 14/19] mm/damon/core: get merge threshold from probe hits when weights are set

Thank you for your contribution! Sashiko AI review found 1 potential issue(s) to consider: - [High] Premature termination of regions merging when using probe weights, breaking `max_nr_regions`…

Thank you for your contribution! Sashiko AI review found 1 potential issue(s) to consider:
- [High] Premature termination of regions merging when using probe weights, breaking max_nr_regions enforcement. --

--- Patch [14]: [RFC PATCH v1.3 14/19] mm/damon/core: get merge threshold from probe hits when weights are set --- commit c2e77863ffba068b4f2b7db5f45690d846ec2ad7
Author: SJ Park <[email protected]>

mm/damon/core: get merge threshold from probe hits when weights are set

This commit updates DAMON to calculate the merge threshold based on the maximum probe hits weighted sum when probe weights are used. It updates kdamond_fn() to retrieve this max sum via the apply_probes() callback.

Quoted 4 lines
mm/damon/core.c +0 -0
index f7782c69037da..91964336ce31e 100644

[ ... ]

Quoted 8 lines
mm/damon/core.c +1 -3
@@ -3776,9 +3777,18 @@ static int kdamond_fn(void *data)
 
 		if (!access_check_disabled && ctx->ops.check_accesses)
 			max_merge_score = ctx->ops.check_accesses(ctx);
-		if (ctx->ops.apply_probes)
-			ctx->ops.apply_probes(ctx, access_check_disabled,
-					false);
+		if (ctx->ops.apply_probes) {

mm/damon/core.c static int kdamond_fn(void *data) · line 3790

Quoted 10 lines
mm/damon/core.c +10 -0
+			if (time_after_eq(ctx->passed_sample_intervals,
+						next_aggregation_sis) &&
+					access_check_disabled)
+				get_max_wsum = true;
+			else
+				get_max_wsum = false;
+			max_wsum = ctx->ops.apply_probes(ctx,
+					access_check_disabled, get_max_wsum);
+			if (get_max_wsum)
+				max_merge_score = max_wsum;

[Severity: High]
Does this regression break the max_nr_regions enforcement in kdamond_merge_regions()?

When probe weights are set, max_merge_score is derived from the user-provided probe weights and passed as the initial threshold to kdamond_merge_regions():

mm/damon/core.c:kdamond_merge_regions() {
    ...
    max_thres = c->attrs.aggr_interval /
        (c->attrs.sample_interval ?  c->attrs.sample_interval : 1);
    do {
        ...
        threshold = max(1, threshold * 2);
    } while (nr_regions > c->attrs.max_nr_regions &&
            threshold / 2 < max_thres);
    ...
}

However, max_thres is hardcoded to the maximum unweighted access frequency.

If the dynamically weighted max_wsum is large enough, the initial threshold passed to kdamond_merge_regions() could exceed max_thres * 2.

If that happens, wouldn't the loop terminate prematurely on the first pass even when nr_regions > max_nr_regions, allowing the number of regions to grow unboundedly?

Quoted 4 lines
mm/damon/core.c +1 -0
+		}
 
 		if (time_after_eq(ctx->passed_sample_intervals,
 					next_aggregation_sis)) {
Signature · 1 line
Sashiko AI review · https://sashiko.dev/#/patchset/[email protected]?part=14
author maintainer
#22 lore raw

Re: [RFC PATCH v1.3 14/19] mm/damon/core: get merge threshold from probe hits when weights are set

Quoted 57 lines · On Fri, 10 Jul 2026 00:38:39 +0000 [email protected] wrote:

Thank you for your contribution! Sashiko AI review found 1 potential issue(s) to consider:
- [High] Premature termination of regions merging when using probe weights, breaking max_nr_regions enforcement. --

--- Patch [14]: [RFC PATCH v1.3 14/19] mm/damon/core: get merge threshold from probe hits when weights are set --- commit c2e77863ffba068b4f2b7db5f45690d846ec2ad7
Author: SJ Park <[email protected]>

mm/damon/core: get merge threshold from probe hits when weights are set

This commit updates DAMON to calculate the merge threshold based on the maximum probe hits weighted sum when probe weights are used. It updates kdamond_fn() to retrieve this max sum via the apply_probes() callback.

Quoted 4 lines
mm/damon/core.c +0 -0
index f7782c69037da..91964336ce31e 100644

[ ... ]

Quoted 8 lines
mm/damon/core.c +1 -3
@@ -3776,9 +3777,18 @@ static int kdamond_fn(void *data)
 
 		if (!access_check_disabled && ctx->ops.check_accesses)
 			max_merge_score = ctx->ops.check_accesses(ctx);
-		if (ctx->ops.apply_probes)
-			ctx->ops.apply_probes(ctx, access_check_disabled,
-					false);
+		if (ctx->ops.apply_probes) {

mm/damon/core.c static int kdamond_fn(void *data) · line 3790

Quoted 10 lines
mm/damon/core.c +10 -0
+			if (time_after_eq(ctx->passed_sample_intervals,
+						next_aggregation_sis) &&
+					access_check_disabled)
+				get_max_wsum = true;
+			else
+				get_max_wsum = false;
+			max_wsum = ctx->ops.apply_probes(ctx,
+					access_check_disabled, get_max_wsum);
+			if (get_max_wsum)
+				max_merge_score = max_wsum;

[Severity: High]
Does this regression break the max_nr_regions enforcement in kdamond_merge_regions()?

When probe weights are set, max_merge_score is derived from the user-provided probe weights and passed as the initial threshold to kdamond_merge_regions():

mm/damon/core.c:kdamond_merge_regions() {
    ...
    max_thres = c->attrs.aggr_interval /
        (c->attrs.sample_interval ?  c->attrs.sample_interval : 1);
    do {
        ...
        threshold = max(1, threshold * 2);
    } while (nr_regions > c->attrs.max_nr_regions &&
            threshold / 2 < max_thres);
    ...
}
Quoted 8 lines

However, max_thres is hardcoded to the maximum unweighted access frequency.

If the dynamically weighted max_wsum is large enough, the initial threshold passed to kdamond_merge_regions() could exceed max_thres * 2.

If that happens, wouldn't the loop terminate prematurely on the first pass even when nr_regions > max_nr_regions, allowing the number of regions to grow unboundedly?

No issue. The later patch of this series will set max_thres with weighted sum.

Quoted 8 lines
Quoted 5 lines
mm/damon/core.c +1 -0
+		}
 
 		if (time_after_eq(ctx->passed_sample_intervals,
 					next_aggregation_sis)) {
Signature · 1 line
Sashiko AI review · https://sashiko.dev/#/patchset/[email protected]?part=14

Thanks,
SJ

author maintainer
#23 lore raw

RFC PATCH 15/19 mm/damon/core: implement damon_has_probe_weight()

In reply to SJ Park

DAMON monitors only data attributes when probe weights are set. However, the function for detecting it is intentionally returning false always. The intention was to make changes for complete support of the mode in a safe and incremental way. Now all the building blocks are made. Complete the mode detection function so that the mode can really start working.

---
 mm/damon/core.c | 6 ++++++
 1 file changed, 6 insertions(+)
mm/damon/core.c +6 -0
index 91964336ce31e..806a67d02a6e9 100644
@@ -211,6 +211,12 @@ static struct damon_probe *damon_nth_probe(int n, struct damon_ctx *ctx)
 
 static bool damon_has_probe_weights(struct damon_ctx *c)
 {
+	struct damon_probe *p;
+
+	damon_for_each_probe(p, c) {
+		if (p->weight)
+			return true;
+	}
 	return false;
 }
 
Signature · 1 line
2.47.3
#24 lore raw

Re: [RFC PATCH v1.3 15/19] mm/damon/core: implement damon_has_probe_weight()

Thank you for your contribution! Sashiko AI review found 3 potential issue(s) to consider:

Thank you for your contribution! Sashiko AI review found 3 potential issue(s) to consider:

New issues:
- [High] When probe weights are enabled, damos_apply_target() aggressively merges adjacent regions regardless of their probe_hits, permanently losing monitoring data.
- [High] Setting probe weights on unsupported operations backends (like DAMON_OPS_VADDR) silently disables all memory monitoring, breaking the DAMON core logic.

Pre-existing issues:
- [High] Calling damon_call() on an inactive DAMON context leads to an indefinite hang in wait_for_completion(), allowing a local DoS via sysfs. --

--- Patch [15]: [RFC PATCH v1.3 15/19] mm/damon/core: implement damon_has_probe_weight() --- commit 55c8b58c370f614fee60cf04b8ed7e90eb167302
Author: SJ Park <[email protected]>

mm/damon/core: implement damon_has_probe_weight()

damon monitors only data attributes when probe weights are set. However, the function for detecting it is intentionally returning false always. Complete the mode detection function so that the mode can really start working.

mm/damon/core.c static struct damon_probe *damon_nth_probe(int n, struct damon_ctx *ctx) · line 218

Quoted 13 lines
mm/damon/core.c +5 -0
index 91964336ce31e..806a67d02a6e9 100644
@@ -211,6 +211,12 @@ static struct damon_probe *damon_nth_probe(int n, struct damon_ctx *ctx)
 
 static bool damon_has_probe_weights(struct damon_ctx *c)
 {
+	struct damon_probe *p;
+
+	damon_for_each_probe(p, c) {
+		if (p->weight)
+			return true;

[Severity: High]
Does returning true here cause adjacent regions to be aggressively merged in damos_apply_target(), resulting in the loss of monitoring data?

When access_check_disabled becomes true, nr_accesses remains 0. In damos_apply_target(), regions with identical nr_accesses and age are merged to repair quota-induced splits:

mm/damon/core.c:damos_apply_target() {
    ...
    prev_r->ar.end = r->ar.end;
    damon_destroy_region(r, t);
    ...
}

Since damos_apply_target() unconditionally merges these regions without combining the probe_hits arrays, does this permanently destroy the fine-grained probe_hits data?

[Severity: High]
Can returning true here also silently disable memory monitoring if the operations backend does not support probes?

If a backend like vaddr or fvaddr is used, damon_valid_probe_params() does not verify if ctx->ops.apply_probes is implemented before allowing probe weights.

When this function returns true, standard access checks are bypassed:

mm/damon/core.c:kdamond_fn() {
    bool access_check_disabled = damon_has_probe_weights(ctx);
    ...
    if (!access_check_disabled && ctx->ops.prepare_access_checks)
        ctx->ops.prepare_access_checks(ctx);
}

Because ctx->ops.apply_probes is null, neither standard accesses nor probe accesses are evaluated. Will the kdamond worker thread spin without recording any memory activity?

mm/damon/core.c static struct damon_probe *damon_nth_probe(int n, struct damon_ctx *ctx) · line 221

Quoted 3 lines
mm/damon/core.c +1 -0
+	}
 	return false;
 }

[Severity: High]
This is a pre-existing issue, but is there a risk of an indefinite hang when calling damon_call() from sysfs?

Looking at the sysfs store functions for reclaim and lru_sort, they invoke damon_call() without verifying if the kdamond thread is actively running:

mm/damon/reclaim.c:damon_reclaim_commit_inputs_store() {
    ...
    if (!ctx)
        return -EINVAL;

    err = damon_call(ctx, &control);
    ...
}

If commit_inputs is written to while the module is disabled, damon_call() will enqueue the request and block indefinitely on wait_for_completion() because there is no kdamond thread to process the queue. Could we check damon_is_running() before calling damon_call()?

Signature · 1 line
Sashiko AI review · https://sashiko.dev/#/patchset/[email protected]?part=15
author maintainer
#25 lore raw

Re: [RFC PATCH v1.3 15/19] mm/damon/core: implement damon_has_probe_weight()

Quoted 50 lines · On Fri, 10 Jul 2026 00:46:50 +0000 [email protected] wrote:

Thank you for your contribution! Sashiko AI review found 3 potential issue(s) to consider:

New issues:
- [High] When probe weights are enabled, damos_apply_target() aggressively merges adjacent regions regardless of their probe_hits, permanently losing monitoring data.
- [High] Setting probe weights on unsupported operations backends (like DAMON_OPS_VADDR) silently disables all memory monitoring, breaking the DAMON core logic.

Pre-existing issues:
- [High] Calling damon_call() on an inactive DAMON context leads to an indefinite hang in wait_for_completion(), allowing a local DoS via sysfs. --

--- Patch [15]: [RFC PATCH v1.3 15/19] mm/damon/core: implement damon_has_probe_weight() --- commit 55c8b58c370f614fee60cf04b8ed7e90eb167302
Author: SJ Park <[email protected]>

mm/damon/core: implement damon_has_probe_weight()

damon monitors only data attributes when probe weights are set. However, the function for detecting it is intentionally returning false always. Complete the mode detection function so that the mode can really start working.

mm/damon/core.c static struct damon_probe *damon_nth_probe(int n, struct damon_ctx *ctx) · line 218

Quoted 13 lines
mm/damon/core.c +5 -0
index 91964336ce31e..806a67d02a6e9 100644
@@ -211,6 +211,12 @@ static struct damon_probe *damon_nth_probe(int n, struct damon_ctx *ctx)
 
 static bool damon_has_probe_weights(struct damon_ctx *c)
 {
+	struct damon_probe *p;
+
+	damon_for_each_probe(p, c) {
+		if (p->weight)
+			return true;

[Severity: High]
Does returning true here cause adjacent regions to be aggressively merged in damos_apply_target(), resulting in the loss of monitoring data?

When access_check_disabled becomes true, nr_accesses remains 0. In damos_apply_target(), regions with identical nr_accesses and age are merged to repair quota-induced splits:

mm/damon/core.c:damos_apply_target() {
    ...
    prev_r->ar.end = r->ar.end;
    damon_destroy_region(r, t);
    ...
}
Quoted 3 lines

Since damos_apply_target() unconditionally merges these regions without combining the probe_hits arrays, does this permanently destroy the fine-grained probe_hits data?

No issue. Sane users shouldn't run DAMOS in attrs only monitoring mode.

Quoted 18 lines

[Severity: High]
Can returning true here also silently disable memory monitoring if the operations backend does not support probes?

If a backend like vaddr or fvaddr is used, damon_valid_probe_params() does not verify if ctx->ops.apply_probes is implemented before allowing probe weights.

When this function returns true, standard access checks are bypassed:

mm/damon/core.c:kdamond_fn() {
    bool access_check_disabled = damon_has_probe_weights(ctx);
    ...
    if (!access_check_disabled && ctx->ops.prepare_access_checks)
        ctx->ops.prepare_access_checks(ctx);
}
Quoted 3 lines

Because ctx->ops.apply_probes is null, neither standard accesses nor probe accesses are evaluated. Will the kdamond worker thread spin without recording any memory activity?

Intended behavior.

Quoted 21 lines

mm/damon/core.c static struct damon_probe *damon_nth_probe(int n, struct damon_ctx *ctx) · line 221

Quoted 4 lines
mm/damon/core.c +1 -0
+	}
 	return false;
 }

[Severity: High]
This is a pre-existing issue, but is there a risk of an indefinite hang when calling damon_call() from sysfs?

Looking at the sysfs store functions for reclaim and lru_sort, they invoke damon_call() without verifying if the kdamond thread is actively running:

mm/damon/reclaim.c:damon_reclaim_commit_inputs_store() {
    ...
    if (!ctx)
        return -EINVAL;

    err = damon_call(ctx, &control);
    ...
}
Quoted 4 lines

If commit_inputs is written to while the module is disabled, damon_call() will enqueue the request and block indefinitely on wait_for_completion() because there is no kdamond thread to process the queue. Could we check damon_is_running() before calling damon_call()?

No. call_controls_obsolete avoids this problem.

Quoted 3 lines
Signature · 2 lines
-- 
Sashiko AI review · https://sashiko.dev/#/patchset/[email protected]?part=15

Thanks,
SJ

author maintainer
#26 lore raw

RFC PATCH 16/19 mm/damon/sysfs: implement probe/weight file

In reply to SJ Park

Implement a new sysfs file, 'weight', under probe directory. Users will be able to set the probe weight and enable the attributes only monitoring using it.

---
 mm/damon/sysfs.c | 25 +++++++++++++++++++++++++
 1 file changed, 25 insertions(+)
mm/damon/sysfs.c +25 -0
index 6d7e36c9e509d..b5fe036f78015 100644
@@ -1065,6 +1065,7 @@ static const struct kobj_type damon_sysfs_filters_ktype = {
 
 struct damon_sysfs_probe {
 	struct kobject kobj;
+	unsigned int weight;
 	struct damon_sysfs_filters *filters;
 };
 
@@ -1100,12 +1101,35 @@ static void damon_sysfs_probe_rm_dirs(struct damon_sysfs_probe *probe)
 	}
 }
 
+static ssize_t weight_show(struct kobject *kobj, struct kobj_attribute *attr,
+		char *buf)
+{
+	struct damon_sysfs_probe *probe = container_of(kobj,
+			struct damon_sysfs_probe, kobj);
+
+	return sysfs_emit(buf, "%u\n", probe->weight);
+}
+
+static ssize_t weight_store(struct kobject *kobj,
+		struct kobj_attribute *attr, const char *buf, size_t count)
+{
+	struct damon_sysfs_probe *probe = container_of(kobj,
+			struct damon_sysfs_probe, kobj);
+	int err = kstrtouint(buf, 0, &probe->weight);
+
+	return err ? err : count;
+}
+
 static void damon_sysfs_probe_release(struct kobject *kobj)
 {
 	kfree(container_of(kobj, struct damon_sysfs_probe, kobj));
 }
 
+static struct kobj_attribute damon_sysfs_probe_weight_attr =
+		__ATTR_RW_MODE(weight, 0600);
+
 static struct attribute *damon_sysfs_probe_attrs[] = {
+	&damon_sysfs_probe_weight_attr.attr,
 	NULL,
 };
 ATTRIBUTE_GROUPS(damon_sysfs_probe);
@@ -1965,6 +1989,7 @@ static int damon_sysfs_set_probes(struct damon_ctx *ctx,
 			return -ENOMEM;
 		damon_add_probe(ctx, p);
 		sys_probe = sys_probes->probes_arr[i];
+		p->weight = sys_probe->weight;
 		err = damon_sysfs_set_probe(p, sys_probe);
 		if (err)
 			return err;
Signature · 1 line
2.47.3
author maintainer
#27 lore raw

RFC PATCH 17/19 Docs/mm/damon/design: document attrs-only monitoring

In reply to SJ Park

Update DAMON design document for the attributes only monitoring mode.

---
 Documentation/mm/damon/design.rst | 20 ++++++++++++++++++++
 1 file changed, 20 insertions(+)
Documentation/mm/damon/design.rst +20 -0
index 457d6e8bc7878..6d79e7d69be84 100644
@@ -316,6 +316,26 @@ Another way to do this for higher accuracy is using :ref:`DAMOS filter
 information in page level.  But, because it is operated in page level, the
 overhead is proportional to the size of the memory.
 
+Data Attributes-only Monitoring
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+Data access is the primary monitoring information for DAMON.  Hence it
+:ref:`adjusts <damon_design_data_attrs_monitoring>` regions using the access
+:ref:`counter <damon_design_region_based_sampling>` (``nr_accesses``).  In some
+use cases, however, users may want some of :ref:`attributes
+<damon_design_data_attrs_monitoring>` to be the primary information.
+
+Data attributes-only monitoring mode supports this use case.  For the mode,
+each attribute probe has their priority weight value.  Users can describe by
+what combination of the attributes the primary information is decided, by
+setting the priority weight value.  If the total sum of the weights is not
+zero, the mode is enabled.  The regions adjustment mechanism uses the weighted
+sum of the :ref:`probe hit counts <damon_design_data_attrs_monitoring>` instead
+of ``nr_accesses`` in the case.  When the mode is enabled, access monitoring is
+automatically turned off.  The access counter (``nr_accesses``) will always be
+zero and not updated.  Hence the mode is called Data Attributes "only"
+monitoring.
+
 Dynamic Target Space Updates Handling
 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
 
Signature · 1 line
2.47.3
author maintainer
#28 lore raw

RFC PATCH 18/19 Docs/admin-guide/mm/damon/usage: document weight sysfs file

In reply to SJ Park

Update DAMON usage document for newly added probe weight file.

---
 Documentation/admin-guide/mm/damon/usage.rst | 11 ++++++++---
 Documentation/mm/damon/design.rst            |  5 +++++
 2 files changed, 13 insertions(+), 3 deletions(-)
Documentation/admin-guide/mm/damon/usage.rst +8 -3
index b2649ea011f93..da5f9afd08aef 100644
@@ -73,9 +73,10 @@ comma (",").
     │ │ │ │ │ │ │ intervals_goal/access_bp,aggrs,min_sample_us,max_sample_us
     │ │ │ │ │ │ nr_regions/min,max
     │ │ │ │ │ │ :ref:`probes <damon_usage_sysfs_probes>`/nr_probes
-    │ │ │ │ │ │ │ 0/filters/nr_filters
-    │ │ │ │ │ │ │ │ 0/type,matching,allow,path
-    │ │ │ │ │ │ │ │ ...
+    │ │ │ │ │ │ │ 0/weight
+    │ │ │ │ │ │ │ │ filters/nr_filters
+    │ │ │ │ │ │ │ │ │ 0/type,matching,allow,path
+    │ │ │ │ │ │ │ │ │ ...
     │ │ │ │ │ │ │ ...
     │ │ │ │ │ :ref:`targets <sysfs_targets>`/nr_targets
     │ │ │ │ │ │ :ref:`0 <sysfs_target>`/pid_target,obsolete_target
@@ -286,6 +287,10 @@ In each probe directory, one directory, ``filters`` exists.  The directory
 contains files for installing filters for the probe, that is used to determine
 the data attribute for the probe.
 
+Each probe directory also contains ``weight`` file.  Reading from and writing
+to the file gets and sets the :ref:`attributes-only monitoring
+<damon_design_attrs_only_monitoring>` weight for the attribute of the probe.
+
 In the beginning, ``filters`` directory has only one file, ``nr_filters``.
 Writing a number (``N``) to the file creates the number of child directories
 named ``0`` to ``N-1``.  Each directory represents each filter and works in a
Documentation/mm/damon/design.rst +5 -0
index 6d79e7d69be84..aed6cb1cf4831 100644
@@ -316,6 +316,8 @@ Another way to do this for higher accuracy is using :ref:`DAMOS filter
 information in page level.  But, because it is operated in page level, the
 overhead is proportional to the size of the memory.
 
+.. _damon_design_attrs_only_monitoring:
+
 Data Attributes-only Monitoring
 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
 
@@ -336,6 +338,9 @@ automatically turned off.  The access counter (``nr_accesses``) will always be
 zero and not updated.  Hence the mode is called Data Attributes "only"
 monitoring.
 
+Refer to the :ref:`admin guide <damon_usage_sysfs_probes>` to know how users
+can use the mode.
+
 Dynamic Target Space Updates Handling
 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
 
Signature · 1 line
2.47.3
author maintainer
#29 lore raw

RFC PATCH 19/19 Docs/ABI/damon: document probe weight file

In reply to SJ Park

Update DAMON ABI document for the newly added probe weight sysfs file.

---
 Documentation/ABI/testing/sysfs-kernel-mm-damon | 6 ++++++
 1 file changed, 6 insertions(+)
Documentation/ABI/testing/sysfs-kernel-mm-damon +6 -0
index dd6b5bd76e119..907a504fb64c5 100644
@@ -164,6 +164,12 @@ Description:	Writing a number 'N' to this file creates the number of
 		directories for each DAMON probe named '0' to 'N-1' under the
 		probes/ directory.
 
+What:		/sys/kernel/mm/damon/admin/kdamonds/<K>/contexts/<C>/monitoring_attrs/probes/<P>/weight
+Date:		Jul 2026
+Contact:	SJ Park <[email protected]>
+Description:	Writing to and reading from this file sets and gets the
+		per-probe attribute weight.
+
 What:		/sys/kernel/mm/damon/admin/kdamonds/<K>/contexts/<C>/monitoring_attrs/probes/<P>/filters/nr_filters
 Date:		May 2026
 Contact:	SJ Park <[email protected]>
Signature · 1 line
2.47.3