imx9: scmi: Update get mac from fuse for iMX952
Subsystems (3)
PATCH 1/1 imx9: scmi: Update get mac from fuse for iMX952
From: Ye Li <[email protected]>
Since iMX952 only has 2 pf and 2 vf, update the imx_get_mac_from_fuse to adapt this layout.
Signed-off-by Ye Li <[email protected]>
--- arch/arm/mach-imx/imx9/scmi/soc.c | 12 ++++++++++++ 1 file changed, 12 insertions(+)
arch/arm/mach-imx/imx9/scmi/soc.c +12 -0
@@ -593,6 +593,18 @@ void imx_get_mac_from_fuse(int dev_id, unsigned char *mac)eth_addr_add (mac,8 );/* enetc1 */ if (dev_id ==2 )eth_addr_add (mac,9 );/* enetc2 */ + }else if (is_imx952 ()) { +/* +* i.MX952 uses the following mac address offset list: +* | No. | Mac address user | +* |-----|----------------------| +* | 0 | enetc mac pf0 | +* | 1 | enetc mac vf0 | +* | 2 | enetc mac pf1 | +* | 3 | enetc mac vf1 | +*/ +if (dev_id ==1 ) +eth_addr_add (mac,2 ); }else {if (dev_id ==1 )eth_addr_add (mac,3 );
Signature · 1 line
2.50.1