mm/damon: introduce data attributes only monitoring
Subsystems (4)
SJ Park
maintainercover mm/damon: introduce data attributes only monitoring
TL;DR: Introduce a way to get DAMON's best effort accuracy monitoring of user-demanding non-access data attributes.
Background
==========
DAMON was initially designed for only access monitoring. It turned out users want to get the information together with more data attributes. For example, some users want to know how much of a hot memory region belongs to huge pages or specific cgroups. Page level properties based monitoring was introduced with commit 626ffabe67c2 ("mm/damon: clarify trying vs applying on damos_stat kernel-doc comment") to fill the gap. Because it works only at snapshot level and snapshot capturing in the mode can induce high overhead, commit 45c49d9fd608 ("mm/damon/core:
introduce struct damon_probe") introduced data attributes monitoring.
Data attributes monitoring treats the attributes as only additional and subordinate information. Data access monitoring is always turned on, and regions are adjusted for best accuracy of the access information. In some cases, users may be primarily interested in the attributes more than the access. They might even not care about the access information at all. Because DAMON treats data accesses as the only primary information, such users cannot get high quality attributes information.
Design and Implementation
=========================
Introduce another way for treating data attributes as the primary information. Add 'weight' property to each data attribute probe. When any of the weights are set, the mode is enabled. Data access monitoring is completely turned off in the mode. For region adjustment, the weighted sum of probe hit counters is used instead of the nr_accesses.
Using the weights, users can specify to what attributes they are interested in to what degree. DAMON will adjust the regions and provide the best-effort quality monitoring that is optimized for the user demands.
Extend damon_operations for efficient use of probe hits. Update regions merge and kdamond main logic to support the new mode. Add a new struct field and a sysfs file for API callers and ABI users, respectively.
Test
====
On ~7 GiB memory idle system, run a simple AI-assisted program. The program allocates and faults 2 GiB anonymous pages. Then, it does nothing but wait until the user terminates it. Hence, the system ~2 GiB of anonymous pages with no active accesses.
Monitor the distribution of the anonymous pages using DAMON attributes monitoring mode, using DAMON user-space tool, damo [1].
$ sudo ./damo start --probe_filter allow anon
$ sudo ./damo report access --dont_merge_regions
heatmap: 00000000000000000000000000000000000000000000000399999995111111146666666666666666
# min/max temperatures: -2,470,000,000, -1,620,000,000, column size: 99.800 MiB
intervals: sample 5 ms aggr 100 ms (max access hz 200)
# <start> <size> <freq> <age> <probe hits>
0 4.000 KiB 79.840 MiB 0 hz 24.700 s 2
1 79.844 MiB 718.562 MiB 0 hz 24.700 s 8
2 798.406 MiB 793.148 MiB 0 hz 24.700 s 7
3 1.554 GiB 797.828 MiB 0 hz 24.700 s 7
4 2.333 GiB 794.668 MiB 0 hz 24.600 s 8
5 3.109 GiB 791.117 MiB 0 hz 24.500 s 0
6 3.882 GiB 785.312 MiB 0 hz 24 s 2
7 4.649 GiB 787.867 MiB 0 hz 16.200 s 6
8 5.418 GiB 784.477 MiB 0 hz 23.300 s 6
9 6.184 GiB 783.820 MiB 0 hz 18.200 s 9
10 6.950 GiB 797.730 MiB 0 hz 18.900 s 7
11 7.729 GiB 69.625 MiB 0 hz 18.900 s 0
memory bw estimate: 0 B per second
total size: 7.797 GiB
record DAMON intervals: sample 5 ms, aggr 100 msNote that the line after the line starting with "intervals:" is not provided by the current version of 'damo'. I manually added the legends line for easier understanding of these results.
Each of the 12 lines after the legend line shows the DAMON-found regions. Each line shows 1) index of the region, 2) start address of the region, 3) size of the region, 4) access frequency of the region, 5) age (how long the access frequency on the region was kept) of the region, and finally 6) the probe hit count.
Because data access is the primary information that adjusts region for, and there is only nearly zero access on the system, regions are naively adjusted with the same size. Still <probe hits> show different distribution of the anonymous pages, but it is obviously very rough information.
Switch to the attributes only mode and show how it changes the picture:
$ sudo ./damo tune --probe_filter allow anon --probe_weight 100
$ sudo ./damo report access --dont_merge_regions
heatmap: 88888888888888888889888999999889999999000004888888888888889999988888898888888888
# min/max temperatures: -4,430,000,000, 0, column size: 99.800 MiB
intervals: sample 5 ms aggr 100 ms (max access hz 200)
# <start> <size> <freq> <age> <probe hits>
0 4.000 KiB 60.445 MiB 0 hz 700 ms 0
1 60.449 MiB 1.363 MiB 0 hz 600 ms 18
2 61.812 MiB 144.000 KiB 0 hz 0 ns 1
3 61.953 MiB 1.922 MiB 0 hz 2.400 s 19
4 63.875 MiB 12.133 MiB 0 hz 200 ms 0
[...]
500 5.132 GiB 8.000 KiB 0 hz 2 m 15.800 s 20
501 5.132 GiB 8.000 KiB 0 hz 2 m 16.200 s 0
502 5.132 GiB 16.000 KiB 0 hz 2 m 16.900 s 20
503 5.132 GiB 24.000 KiB 0 hz 2 m 14.200 s 0
504 5.132 GiB 8.000 KiB 0 hz 2 m 14.900 s 20
[...]
923 7.534 GiB 126.637 MiB 0 hz 0 ns 6
924 7.658 GiB 252.000 KiB 0 hz 54.800 s 20
925 7.658 GiB 142.242 MiB 0 hz 300 ms 0
memory bw estimate: 0 B per second
total size: 7.797 GiB
record DAMON intervals: sample 5 ms, aggr 100 msAs expected, regions are adjusted to provide the best accurate picture for the anonymous pages distribution (<probe hits>). The region 0 (60.445 MiB memory from the address 4.000 KiB) has nearly zero anonymous pages. The region 1 (1.363 MiB memory from the address 60.449 MiB) is nearly full with anonymous pages. Region 500 (8 KiB memory from the address 5.132 GiB) is certainly two anonymous pages.
Future Work
===========
Attributes only monitoring disables access monitoring. We will enable that in future, by extending the supported attributes to include data accesses. This patch series, and the future work are parts of the ongoing project [2] for extending DAMON. The project aims to extend DAMON with primitives other than page table accessed bits such as AMD IBS, Intel PEBS, and Arm SPE, to provide more powerful and detailed information like per-CPUs/threads/reads/writes monitoring.
Patches Sequence
================
Patch 1 introduces damon_probe->weight for specifying the weights of each attribute. Patches 2-6 extends apply_probe() damon_ops callback to efficiently support the new mode. Patch 7 fixes wrong use of abs() in the regions merge code. Patch 8 extends regions merge function to work with probe hits in the mode. Patch 8 also introduces the function for detecting the mode enablement but always returns false, for safe and incremental changes. Patches 9 and 10 adds user parameters validation to prevent theoretical overflow of probe hits and the weighted sum. Patches 11-14 incrementally update kdamond_fn() to support the mode. Patch 15 completes the mode detection function implementation, so that the new mode really works. Patch 16 introduces a new sysfs file for ABI users. Finally, patches 17-19 respectively updates design, usage and ABI documents for the new feature and interfaces.
[1] https://github.com/damonitor/damo
[2] https://lore.kernel.org/[email protected]/
Changelog
=========
Changes from RFC v1.3
- RFC v1.3: https://lore.kernel.org/[email protected]
- Drop RFC tag.
- Rebase to latest mm-new.
Changes from RFC v1.2
- RFC v1.2: https://lore.kernel.org/[email protected]
- Fix two typos in comments.
Changes from RFC v1.1
- RFC v1.1: https://lore.kernel.org/[email protected]
- Fix typos in comments.
- Fix wrong use of abs() with abs_diff().
- Prevent probe hits and its weighted sum overflow.
Changes from RFC
- RFC: https://lore.kernel.org/[email protected]
- Add kernel-doc comment for damon_probe->weight.
- Fix typos in kernel-doc, design and usage documents.
SJ Park (19):
mm/damon/core: introduce damon_probe->weight mm/damon/core: ask apply_probes() ops callback to set sampling address mm/damon/paddr: set samples in apply_probes() if requested mm/damon/core: ask apply_probe() to return max probe hits weighted sum mm/damon/core: implement damon_probe_hits_wsum() mm/damon/paddr: respect return_max_wsum
mm/damon/core: use abs_diff() instead of abs() mm/damon/core: extend merge function to work with probe hits mm/damon/core: disallow probe_hits overflow on attrs only monitoring mm/damon/core: validate params for probe hits weighted sum overflow mm/damon/core: disable access monitoring when probe weights are set mm/damon/core: set samples in apply_probes() if probe weights are set mm/damon/core: s/max_nr_accesses/max_merge_score/ in kdamond_fn() mm/damon/core: get merge threshold from probe hits when weights are
set
mm/damon/core: implement damon_has_probe_weight() mm/damon/sysfs: implement probe/weight file Docs/mm/damon/design: document attrs-only monitoring Docs/admin-guide/mm/damon/usage: document weight sysfs file Docs/ABI/damon: document probe weight file
.../ABI/testing/sysfs-kernel-mm-damon | 6 + Documentation/admin-guide/mm/damon/usage.rst | 11 +- Documentation/mm/damon/design.rst | 25 ++++ include/linux/damon.h | 12 +- mm/damon/core.c | 139 +++++++++++++++--- mm/damon/paddr.c | 11 +- mm/damon/sysfs.c | 25 ++++ mm/damon/tests/core-kunit.h | 13 +- 8 files changed, 217 insertions(+), 25 deletions(-)
base-commit: 6af40ebf40984a5ea1bbf273c65c9ad4b6e73291
Signature · 1 line
2.47.3
SJ Park
maintainerPATCH 1/19 mm/damon/core: introduce damon_probe->weight
Add a new field, weight to damon_probe struct. The field is used to specify the degree of the API caller's interest to the data attribute of the probe.
--- include/linux/damon.h | 2 ++ mm/damon/core.c | 3 +++ 2 files changed, 5 insertions(+)
include/linux/damon.h +2 -0
@@ -760,10 +760,12 @@ struct damon_filter {/** * struct damon_probe - Data region attribute probe. * +* @weight: Relative priority of the attribute for this probe. * @filters: Filters for assessing if a given region is for this probe. * @list: Siblings list. */ struct damon_probe { +unsigned int weight;struct list_head filters;struct list_head list; };
mm/damon/core.c +3 -0
@@ -166,6 +166,7 @@ struct damon_probe *damon_new_probe(void) p =kmalloc_obj (*p);if (!p)return NULL ; + p->weight =0 ;INIT_LIST_HEAD (&p->filters);INIT_LIST_HEAD (&p->list);return p;
@@ -1658,6 +1659,7 @@ static int damon_commit_probes(struct damon_ctx *dst, struct damon_ctx *src)damon_for_each_probe_safe (dst_probe, next, dst) { src_probe =damon_nth_probe (i++, src);if (src_probe) { + dst_probe->weight = src_probe->weight; err =damon_commit_filters (dst_probe, src_probe);if (err)return err;
@@ -1674,6 +1676,7 @@ static int damon_commit_probes(struct damon_ctx *dst, struct damon_ctx *src)if (!new_probe)return -ENOMEM ;damon_add_probe (dst, new_probe); + new_probe->weight = src_probe->weight; err =damon_commit_filters (new_probe, src_probe);if (err)return err;
Signature · 1 line
2.47.3
SJ Park
maintainerPATCH 2/19 mm/damon/core: ask apply_probes() ops callback to set sampling address
In reply to SJ Parkprepare_access_checks() DAMON ops callback sets the monitoring sampling address per region. In future, DAMON will be able to call only apply_probes(). In this case, applyy_probes() may need to do the sampling address setup, to minimize unnecessary regions iteration. Update the protocol for the request.
--- include/linux/damon.h | 5 +++-- mm/damon/core.c | 2 +- mm/damon/paddr.c | 2 +- 3 files changed, 5 insertions(+), 4 deletions(-)
include/linux/damon.h +3 -2
@@ -647,7 +647,8 @@ enum damon_ops_id {* It should also return max number of observed accesses that made as a result * of its update. The value will be used for regions adjustment threshold. * @apply_probes should apply the data attribute probes to each region and -* accordingly update the probe hits counter of the region. +* accordingly update the probe hits counter of the region. It should also +* set &damon_region->sampling_addr of each region if ``set_samples`` is true. * @get_scheme_score should return the priority score of a region for a scheme * as an integer in [0, &DAMOS_MAX_SCORE]. * @apply_scheme is called from @kdamond when a region for user provided
@@ -665,7 +666,7 @@ struct damon_operations {void (*update)(struct damon_ctx *context);void (*prepare_access_checks)(struct damon_ctx *context);unsigned int (*check_accesses)(struct damon_ctx *context); -void (*apply_probes)(struct damon_ctx *context); +void (*apply_probes)(struct damon_ctx *context,bool set_samples);int (*get_scheme_score)(struct damon_ctx *context,struct damon_region *r,struct damos *scheme); unsigned long (*apply_scheme)(struct damon_ctx *context,
mm/damon/core.c +1 -1
@@ -3692,7 +3692,7 @@ static int kdamond_fn(void *data)if (ctx->ops.check_accesses) max_nr_accesses = ctx->ops.check_accesses (ctx);if (ctx->ops.apply_probes) - ctx->ops.apply_probes (ctx); + ctx->ops.apply_probes (ctx, false);if (time_after_eq (ctx->passed_sample_intervals, next_aggregation_sis)) {
mm/damon/paddr.c +1 -1
@@ -166,7 +166,7 @@ static bool damon_pa_filter_pass(phys_addr_t pa, struct folio *folio,return pass; } -static void damon_pa_apply_probes (struct damon_ctx *ctx) +static void damon_pa_apply_probes (struct damon_ctx *ctx,bool set_samples) {struct damon_target *t;struct damon_region *r;
Signature · 1 line
2.47.3
[email protected]
AI reviewRe: [PATCH 02/19] mm/damon/core: ask apply_probes() ops callback to set sampling address
Thank you for your contribution! Sashiko AI review found 1 potential issue(s) to consider: - [Medium] The `damon_pa_apply_probes` callback fails to implement the newly added `set_samples` parameter…
Thank you for your contribution! Sashiko AI review found 1 potential issue(s) to consider:
- [Medium] The damon_pa_apply_probes callback fails to implement the newly added set_samples parameter, violating the updated API operations contract. --
--- Patch [2]: [PATCH 02/19] mm/damon/core: ask apply_probes() ops callback to set sampling address --- commit 2da9028945951622496aef07a601ae5bfba7972a
Author: SJ Park <[email protected]>
mm/damon/core: ask apply_probes() ops callback to set sampling address
This commit updates the DAMON ops callback apply_probes() to accept a set_samples boolean parameter. The parameter allows the callback to setup the sampling address per region to minimize unnecessary regions iteration.
Quoted 4 lines
include/linux/damon.h +0
-0
[ ... ]
Quoted 10 lines
include/linux/damon.h +2
-1@@ -647,7 +647,8 @@ enum damon_ops_id {* It should also return max number of observed accesses that made as a result * of its update. The value will be used for regions adjustment threshold. * @apply_probes should apply the data attribute probes to each region and -* accordingly update the probe hits counter of the region. +* accordingly update the probe hits counter of the region. It should also +* set &damon_region->sampling_addr of each region if ``set_samples`` is true. * @get_scheme_score should return the priority score of a region for a scheme * as an integer in [0, &DAMOS_MAX_SCORE]. * @apply_scheme is called from @kdamond when a region for user provided
[ ... ]
Quoted 4 lines
mm/damon/paddr.c +0
-0
[ ... ]
mm/damon/paddr.c static bool damon_pa_filter_pass(phys_addr_t pa, struct folio *folio, · line 172
Quoted 9 lines
mm/damon/paddr.c +1
-1@@ -166,7 +166,7 @@ static bool damon_pa_filter_pass(phys_addr_t pa, struct folio *folio,return pass; } -static void damon_pa_apply_probes (struct damon_ctx *ctx) +static void damon_pa_apply_probes (struct damon_ctx *ctx,bool set_samples) {struct damon_target *t;struct damon_region *r;
[Severity: Medium]
Will callers passing set_samples=true end up using stale sampling addresses?
The documentation in include/linux/damon.h states that apply_probes should set &damon_region->sampling_addr if set_samples is true.
However, the updated damon_pa_apply_probes() does not seem to handle the new parameter:
mm/damon/paddr.c:damon_pa_apply_probes() {
...
damon_for_each_region(r, t) {
int i = 0;
phys_addr_t pa;
struct folio *folio;
pa = damon_pa_phys_addr(r->sampling_addr,
ctx->addr_unit);
...
}It reads the existing r->sampling_addr without generating a new random address when set_samples is true.
Signature · 1 line
Sashiko AI review · https://sashiko.dev/#/patchset/[email protected]?part=2
SJ Park
maintainerRe: [PATCH 02/19] mm/damon/core: ask apply_probes() ops callback to set sampling address
Quoted 68 lines · On Fri, 10 Jul 2026 13:56:08 +0000 [email protected] wrote:
Thank you for your contribution! Sashiko AI review found 1 potential issue(s) to consider:
- [Medium] Thedamon_pa_apply_probescallback fails to implement the newly addedset_samplesparameter, violating the updated API operations contract. ----- Patch [2]: [PATCH 02/19]
mm/damon/core: askapply_probes()ops callback to set sampling address --- commit2da9028945951622496aef07a601ae5bfba7972a
Author: SJ Park <[email protected]>
mm/damon/core: askapply_probes()ops callback to set sampling addressThis commit updates the DAMON ops callback
apply_probes()to accept aset_samplesboolean parameter. The parameter allows the callback to setup the sampling address per region to minimize unnecessary regions iteration.Quoted 4 lines
include/linux/damon.h +0
-0[ ... ]
Quoted 10 lines
include/linux/damon.h +2
-1@@ -647,7 +647,8 @@ enum damon_ops_id {* It should also return max number of observed accesses that made as a result * of its update. The value will be used for regions adjustment threshold. * @apply_probes should apply the data attribute probes to each region and -* accordingly update the probe hits counter of the region. +* accordingly update the probe hits counter of the region. It should also +* set &damon_region->sampling_addr of each region if ``set_samples`` is true. * @get_scheme_score should return the priority score of a region for a scheme * as an integer in [0, &DAMOS_MAX_SCORE]. * @apply_scheme is called from @kdamond when a region for user provided [ ... ]
Quoted 4 lines
mm/damon/paddr.c +0
-0[ ... ]
mm/damon/paddr.c static bool damon_pa_filter_pass(phys_addr_t pa, struct folio *folio, · line 172
Quoted 9 lines
mm/damon/paddr.c +1
-1@@ -166,7 +166,7 @@ static bool damon_pa_filter_pass(phys_addr_t pa, struct folio *folio,return pass; } -static void damon_pa_apply_probes (struct damon_ctx *ctx) +static void damon_pa_apply_probes (struct damon_ctx *ctx,bool set_samples) {struct damon_target *t;struct damon_region *r;[Severity: Medium]
Will callers passing set_samples=true end up using stale sampling addresses?The documentation in
include/linux/damon.hstates thatapply_probesshould set&damon_region->sampling_addrifset_samplesis true.However, the updated
damon_pa_apply_probes()does not seem to handle the new parameter:mm/damon/paddr.c:damon_pa_apply_probes() { ... damon_for_each_region(r, t) { int i = 0; phys_addr_t pa; struct folio *folio; pa = damon_pa_phys_addr(r->sampling_addr, ctx->addr_unit); ... }
Quoted 2 lines
It reads the existing
r->sampling_addrwithout generating a new random address whenset_samplesis true.
No issue since no caller sets set_samples true.
And a later patch in this series will respect the argument before a caller sets it true.
Quoted 3 lines
Signature · 2 lines
-- Sashiko AI review · https://sashiko.dev/#/patchset/[email protected]?part=2
Thanks,
SJ
SJ Park
maintainerPATCH 3/19 mm/damon/paddr: set samples in apply_probes() if requested
In reply to SJ Parkapply_probe() callback implementation in DAMON_PADDR is ignoring set_samples parameter. Respect it.
--- mm/damon/paddr.c | 4 ++++ 1 file changed, 4 insertions(+)
mm/damon/paddr.c +4 -0
@@ -178,6 +178,10 @@ static void damon_pa_apply_probes(struct damon_ctx *ctx, bool set_samples)phys_addr_t pa;struct folio *folio; +if (set_samples) + r->sampling_addr =damon_rand (ctx, r->ar.start, + r->ar.end); + pa =damon_pa_phys_addr (r->sampling_addr, ctx->addr_unit); folio =damon_get_folio (PHYS_PFN (pa));
Signature · 1 line
2.47.3
[email protected]
AI reviewRe: [PATCH 03/19] mm/damon/paddr: set samples in apply_probes() if requested
Thank you for your contribution! Sashiko AI review found 1 potential issue(s) to consider:
Thank you for your contribution! Sashiko AI review found 1 potential issue(s) to consider:
Pre-existing issues:
- [High] Address advancement using folio_size() from an unaligned address within a large folio overshoots the next folio. --
--- Patch [3]: [PATCH 03/19] mm/damon/paddr: set samples in apply_probes() if requested --- commit 60a9acbe070a2be34c313d6be62fe7e4acb7ec54
Author: SJ Park <[email protected]>
mm/damon/paddr: set samples in apply_probes() if requested
This commit updates damon_pa_apply_probes() to respect the set_samples parameter. It adds logic to randomize the sampling address within the region boundaries using damon_rand() when requested.
Quoted 5 lines
mm/damon/paddr.c +0
-0
mm/damon/paddr.c static void damon_pa_apply_probes(struct damon_ctx *ctx, bool set_samples) · line 187
Quoted 10 lines
mm/damon/paddr.c +4
-0@@ -178,6 +178,10 @@ static void damon_pa_apply_probes(struct damon_ctx *ctx, bool set_samples)phys_addr_t pa;struct folio *folio; +if (set_samples) + r->sampling_addr =damon_rand (ctx, r->ar.start, + r->ar.end); + pa =damon_pa_phys_addr (r->sampling_addr, ctx->addr_unit); folio =damon_get_folio (PHYS_PFN (pa));
[Severity: High]
This is a pre-existing issue in this file, but can the address advancement logic skip over pages during region iteration?
Looking at iteration functions like damon_pa_pageout(), damon_pa_de_activate(), damon_pa_migrate(), and damon_pa_stat() in mm/damon/paddr.c, they all use a pattern for advancing the address similar to this:
mm/damon/paddr.c:damon_pa_pageout() {
...
folio = damon_get_folio(PHYS_PFN(addr));
if (!folio) {
addr += PAGE_SIZE;
continue;
}
...
addr += folio_size(folio);
...
}If the initial iteration address is not aligned to the folio boundary (for example, after a region split or hole), wouldn't adding the full folio size to this unaligned address cause it to overshoot the end of the current folio?
This seems like it would skip over the beginning of the next physical folio, causing those pages to incorrectly escape reclaim, migration, or statistics gathering.
Signature · 1 line
Sashiko AI review · https://sashiko.dev/#/patchset/[email protected]?part=3
SJ Park
maintainerRe: [PATCH 03/19] mm/damon/paddr: set samples in apply_probes() if requested
Quoted 53 lines · On Fri, 10 Jul 2026 14:01:55 +0000 [email protected] wrote:
Thank you for your contribution! Sashiko AI review found 1 potential issue(s) to consider:
Pre-existing issues:
- [High] Address advancement usingfolio_size()from an unaligned address within a large folio overshoots the next folio. ----- Patch [3]: [PATCH 03/19]
mm/damon/paddr: set samples inapply_probes()if requested --- commit60a9acbe070a2be34c313d6be62fe7e4acb7ec54
Author: SJ Park <[email protected]>
mm/damon/paddr: set samples inapply_probes()if requestedThis commit updates
damon_pa_apply_probes()to respect theset_samplesparameter. It adds logic to randomize the sampling address within the region boundaries usingdamon_rand()when requested.Quoted 5 lines
mm/damon/paddr.c +0
-0mm/damon/paddr.c static void damon_pa_apply_probes(struct damon_ctx *ctx, bool set_samples) · line 187
Quoted 10 lines
mm/damon/paddr.c +4
-0@@ -178,6 +178,10 @@ static void damon_pa_apply_probes(struct damon_ctx *ctx, bool set_samples)phys_addr_t pa;struct folio *folio; +if (set_samples) + r->sampling_addr =damon_rand (ctx, r->ar.start, + r->ar.end); + pa =damon_pa_phys_addr (r->sampling_addr, ctx->addr_unit); folio =damon_get_folio (PHYS_PFN (pa));[Severity: High]
This is a pre-existing issue in this file, but can the address advancement logic skip over pages during region iteration?Looking at iteration functions like
damon_pa_pageout(),damon_pa_de_activate(),damon_pa_migrate(), anddamon_pa_stat()inmm/damon/paddr.c, they all use a pattern for advancing the address similar to this:mm/damon/paddr.c:damon_pa_pageout() { ... folio = damon_get_folio(PHYS_PFN(addr)); if (!folio) { addr += PAGE_SIZE; continue; } ... addr += folio_size(folio); ... }
Quoted 7 lines
If the initial iteration address is not aligned to the folio boundary (for example, after a region split or hole), wouldn't adding the full folio size to this unaligned address cause it to overshoot the end of the current folio?
This seems like it would skip over the beginning of the next physical folio, causing those pages to incorrectly escape reclaim, migration, or statistics gathering.
Known issue. I'm working on it. No blocker of this patch.
Quoted 3 lines
Signature · 2 lines
-- Sashiko AI review · https://sashiko.dev/#/patchset/[email protected]?part=3
Thanks,
SJ
SJ Park
maintainerPATCH 4/19 mm/damon/core: ask apply_probe() to return max probe hits weighted sum
In reply to SJ Parkcheck_accesses() DAMON ops callback returns the maximum nr_accesses of regions. DAMON core uses it to calculate a reasonable region merge threshold. The core will need to adjust regions for not nr_accesses but probe hits weighted sum in future. For that, the core needs to know the maximum weighted sum of the regions. Update the protocol for the task.
--- include/linux/damon.h | 5 ++++- mm/damon/core.c | 2 +- mm/damon/paddr.c | 4 +++- 3 files changed, 8 insertions(+), 3 deletions(-)
include/linux/damon.h +4 -1
@@ -649,6 +649,8 @@ enum damon_ops_id {* @apply_probes should apply the data attribute probes to each region and * accordingly update the probe hits counter of the region. It should also * set &damon_region->sampling_addr of each region if ``set_samples`` is true. +* It should also return maximum probe hits weighted sum of regions if +* ``return_max_wsum`` is true. * @get_scheme_score should return the priority score of a region for a scheme * as an integer in [0, &DAMOS_MAX_SCORE]. * @apply_scheme is called from @kdamond when a region for user provided
@@ -666,7 +668,8 @@ struct damon_operations {void (*update)(struct damon_ctx *context);void (*prepare_access_checks)(struct damon_ctx *context);unsigned int (*check_accesses)(struct damon_ctx *context); -void (*apply_probes)(struct damon_ctx *context,bool set_samples); +unsigned int (*apply_probes)(struct damon_ctx *context, +bool set_samples,bool return_max_wsum);int (*get_scheme_score)(struct damon_ctx *context,struct damon_region *r,struct damos *scheme); unsigned long (*apply_scheme)(struct damon_ctx *context,
mm/damon/core.c +1 -1
@@ -3692,7 +3692,7 @@ static int kdamond_fn(void *data)if (ctx->ops.check_accesses) max_nr_accesses = ctx->ops.check_accesses (ctx);if (ctx->ops.apply_probes) - ctx->ops.apply_probes (ctx, false); + ctx->ops.apply_probes (ctx, false, false);if (time_after_eq (ctx->passed_sample_intervals, next_aggregation_sis)) {
mm/damon/paddr.c +3 -1
@@ -166,7 +166,8 @@ static bool damon_pa_filter_pass(phys_addr_t pa, struct folio *folio,return pass; } -static void damon_pa_apply_probes (struct damon_ctx *ctx,bool set_samples) +static unsigned int damon_pa_apply_probes (struct damon_ctx *ctx, +bool set_samples,bool return_max_wsum) {struct damon_target *t;struct damon_region *r;
@@ -194,6 +195,7 @@ static void damon_pa_apply_probes(struct damon_ctx *ctx, bool set_samples)folio_put (folio); } } +return 0 ; }/*
Signature · 1 line
2.47.3
[email protected]
AI reviewRe: [PATCH 04/19] mm/damon/core: ask apply_probe() to return max probe hits weighted sum
Thank you for your contribution! Sashiko AI review found 1 potential issue(s) to consider: - [Medium] The apply_probes callback fails to calculate and return the maximum probe hits weighted sum…
Thank you for your contribution! Sashiko AI review found 1 potential issue(s) to consider:
- [Medium] The apply_probes callback fails to calculate and return the maximum probe hits weighted sum, unconditionally returning 0. --
--- Patch [4]: [PATCH 04/19] mm/damon/core: ask apply_probe() to return max probe hits weighted sum --- commit bb862935a31b8d93d0e79b24c1d5bb92b5faf39a
Author: SJ Park <[email protected]>
mm/damon/core: ask apply_probe() to return max probe hits weighted sum
This commit updates the DAMON operations protocol to allow the apply_probes callback to calculate and return the maximum probe hits weighted sum. It modifies the function signature to take a return_max_wsum parameter and updates the existing implementation in damon_pa_apply_probes() to return an unsigned int.
Quoted 4 lines
include/linux/damon.h +0
-0
[ ... ]
Quoted 9 lines
include/linux/damon.h +2
-0@@ -649,6 +649,8 @@ enum damon_ops_id {* @apply_probes should apply the data attribute probes to each region and * accordingly update the probe hits counter of the region. It should also * set &damon_region->sampling_addr of each region if ``set_samples`` is true. +* It should also return maximum probe hits weighted sum of regions if +* ``return_max_wsum`` is true. * @get_scheme_score should return the priority score of a region for a scheme * as an integer in [0, &DAMOS_MAX_SCORE]. * @apply_scheme is called from @kdamond when a region for user provided
[ ... ]
Quoted 4 lines
mm/damon/paddr.c +0
-0
[ ... ]
Quoted 10 lines
mm/damon/paddr.c +2
-1@@ -166,7 +166,8 @@ static bool damon_pa_filter_pass(phys_addr_t pa, struct folio *folio,return pass; } -static void damon_pa_apply_probes (struct damon_ctx *ctx,bool set_samples) +static unsigned int damon_pa_apply_probes (struct damon_ctx *ctx, +bool set_samples,bool return_max_wsum) {struct damon_target *t;struct damon_region *r;
[ ... ]
mm/damon/paddr.c static void damon_pa_apply_probes(struct damon_ctx *ctx, bool set_samples) · line 199
Quoted 6 lines
mm/damon/paddr.c +1
-0@@ -194,6 +195,7 @@ static void damon_pa_apply_probes(struct damon_ctx *ctx, bool set_samples)folio_put (folio); } } +return 0 ; }
[Severity: Medium]
Will this unconditionally return 0 even when return_max_wsum is true?
The struct documentation states the callback should return the maximum probe hits weighted sum of regions if return_max_wsum is true. However, the implementation in damon_pa_apply_probes() simply returns 0 at the end without computing the weighted sum.
Should the maximum weighted sum calculation be implemented here to fulfill the updated protocol?
Signature · 1 line
Sashiko AI review · https://sashiko.dev/#/patchset/[email protected]?part=4
SJ Park
maintainerRe: [PATCH 04/19] mm/damon/core: ask apply_probe() to return max probe hits weighted sum
Quoted 59 lines · On Fri, 10 Jul 2026 14:01:19 +0000 [email protected] wrote:
Thank you for your contribution! Sashiko AI review found 1 potential issue(s) to consider:
- [Medium] Theapply_probescallback fails to calculate and return the maximum probe hits weighted sum, unconditionally returning 0. ----- Patch [4]: [PATCH 04/19]
mm/damon/core: askapply_probe()to return max probe hits weighted sum --- commitbb862935a31b8d93d0e79b24c1d5bb92b5faf39a
Author: SJ Park <[email protected]>
mm/damon/core: askapply_probe()to return max probe hits weighted sumThis commit updates the DAMON operations protocol to allow the
apply_probescallback to calculate and return the maximum probe hits weighted sum. It modifies the function signature to take areturn_max_wsumparameter and updates the existing implementation indamon_pa_apply_probes()to return an unsigned int.Quoted 4 lines
include/linux/damon.h +0
-0[ ... ]
Quoted 9 lines
include/linux/damon.h +2
-0@@ -649,6 +649,8 @@ enum damon_ops_id {* @apply_probes should apply the data attribute probes to each region and * accordingly update the probe hits counter of the region. It should also * set &damon_region->sampling_addr of each region if ``set_samples`` is true. +* It should also return maximum probe hits weighted sum of regions if +* ``return_max_wsum`` is true. * @get_scheme_score should return the priority score of a region for a scheme * as an integer in [0, &DAMOS_MAX_SCORE]. * @apply_scheme is called from @kdamond when a region for user provided [ ... ]
Quoted 4 lines
mm/damon/paddr.c +0
-0[ ... ]
Quoted 10 lines
mm/damon/paddr.c +2
-1@@ -166,7 +166,8 @@ static bool damon_pa_filter_pass(phys_addr_t pa, struct folio *folio,return pass; } -static void damon_pa_apply_probes (struct damon_ctx *ctx,bool set_samples) +static unsigned int damon_pa_apply_probes (struct damon_ctx *ctx, +bool set_samples,bool return_max_wsum) {struct damon_target *t;struct damon_region *r;[ ... ]
mm/damon/paddr.c static void damon_pa_apply_probes(struct damon_ctx *ctx, bool set_samples) · line 199
Quoted 6 lines
mm/damon/paddr.c +1
-0@@ -194,6 +195,7 @@ static void damon_pa_apply_probes(struct damon_ctx *ctx, bool set_samples)folio_put (folio); } } +return 0 ; }[Severity: Medium]
Will this unconditionally return 0 even whenreturn_max_wsumis true?
Quoted 7 lines
The struct documentation states the callback should return the maximum probe hits weighted sum of regions if
return_max_wsumis true. However, the implementation indamon_pa_apply_probes()simply returns 0 at the end without computing the weighted sum.Should the maximum weighted sum calculation be implemented here to fulfill the updated protocol?
No issue. No caller sets return_max_wsum true at this moment.
And a later patch in this series will make the argument be respected before someone sets it true.
Quoted 3 lines
Signature · 2 lines
-- Sashiko AI review · https://sashiko.dev/#/patchset/[email protected]?part=4
Thanks,
SJ
SJ Park
maintainerPATCH 5/19 mm/damon/core: implement damon_probe_hits_wsum()
In reply to SJ ParkWhen damon_probe->weight is set, the weighted sum of probe hits will be useful. It will be useful for not only the users but also DAMON internal logics like regions merging. Implement a function for calculating it.
--- include/linux/damon.h | 2 ++ mm/damon/core.c | 24 ++++++++++++++++++++++++ 2 files changed, 26 insertions(+)
include/linux/damon.h +2 -0
@@ -1012,6 +1012,8 @@ unsigned int damon_nr_accesses_mvsum(struct damon_region *r, struct damon_ctx *ctx);unsigned char damon_probe_hits_mvsum (int probe_idx,struct damon_region *r,struct damon_ctx *ctx); +unsigned int damon_probe_hits_wsum (struct damon_region *r,bool last, +struct damon_ctx *ctx);int damon_set_regions (struct damon_target *t,struct damon_addr_range *ranges,unsigned int nr_ranges,unsigned long min_region_sz);
mm/damon/core.c +24 -0
@@ -393,6 +393,30 @@ static bool damon_is_last_region(struct damon_region *r,return list_is_last (&r->list, &t->regions_list); } +/** +* damon_probe_hits_wsum() - Returns probe hits weighted sum of a region. +* @r: region to get the weighted sum of. +* @last: if the request is for last-window aggregated probe hits. +* @ctx: context of &r. +* +* Return: the weighted sum of probe hits of the region. +*/ +unsigned int damon_probe_hits_wsum (struct damon_region *r,bool last, +struct damon_ctx *ctx) +{ +struct damon_probe *probe; +unsigned int sum =0 ; +int i =0 ; + +damon_for_each_probe (probe, ctx) { +if (last) + sum += r->last_probe_hits[i++] * probe->weight; +else + sum += r->probe_hits[i++] * probe->weight; + } +return sum; +} +/* * Check whether a region is intersecting an address range *
Signature · 1 line
2.47.3
SJ Park
maintainerPATCH 6/19 mm/damon/paddr: respect return_max_wsum
In reply to SJ Parkapply_probes() ops implementation in DAMON_PADDR is ignoring return_max_wsum. Respect it.
--- mm/damon/paddr.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-)
mm/damon/paddr.c +5 -2
@@ -172,6 +172,7 @@ static unsigned int damon_pa_apply_probes(struct damon_ctx *ctx,struct damon_target *t;struct damon_region *r;struct damon_probe *p; +unsigned int max_wsum =0 ;damon_for_each_target (t, ctx) {damon_for_each_region (r, t) {
@@ -182,7 +183,6 @@ static unsigned int damon_pa_apply_probes(struct damon_ctx *ctx,if (set_samples) r->sampling_addr =damon_rand (ctx, r->ar.start, r->ar.end); - pa =damon_pa_phys_addr (r->sampling_addr, ctx->addr_unit); folio =damon_get_folio (PHYS_PFN (pa));
@@ -193,9 +193,12 @@ static unsigned int damon_pa_apply_probes(struct damon_ctx *ctx, }if (folio)folio_put (folio); +if (return_max_wsum) + max_wsum =max (damon_probe_hits_wsum (r, false, + ctx), max_wsum); } } -return 0 ; +return max_wsum; }/*
Signature · 1 line
2.47.3
SJ Park
maintainerPATCH 7/19 mm/damon/core: use abs_diff() instead of abs()
In reply to SJ ParkUse of abs() in damon_merge_regions_of() could cause a silent integer overflow since the macro casts unsigned int to signed int. It is unlikely to have such a large value for nr_accesses. Even though it happens, the user impact is just degraded monitoring results. Users showing bad monitoring results for weird setup is quite trivial. But the code is obviously wrong. Use abs_diff() instead.
The issue was discovered [1] by Sashiko.
[1] https://lore.kernel.org/[email protected]/
--- mm/damon/core.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
mm/damon/core.c +2 -2
@@ -3261,7 +3261,7 @@ static void damon_merge_regions_of(struct damon_target *t, unsigned int thres,struct damon_region *r, *prev =NULL , *next;damon_for_each_region_safe (r, next, t) { -if (abs (r->nr_accesses - r->last_nr_accesses) > thres) +if (abs_diff (r->nr_accesses, r->last_nr_accesses) > thres) r->age =0 ;else if ((r->nr_accesses ==0 ) != (r->last_nr_accesses ==0 )) r->age =0 ;
@@ -3269,7 +3269,7 @@ static void damon_merge_regions_of(struct damon_target *t, unsigned int thres, r->age++;if (prev && prev->ar.end == r->ar.start && -abs (prev->nr_accesses - r->nr_accesses) <= thres && +abs_diff (prev->nr_accesses, r->nr_accesses) <= thres &&damon_sz_region (prev) +damon_sz_region (r) <= sz_limit)damon_merge_two_regions (t, prev, r);else
Signature · 1 line
2.47.3
[email protected]
AI reviewRe: [PATCH 07/19] mm/damon/core: use abs_diff() instead of abs()
Thank you for your contribution! Sashiko AI review found 1 potential issue(s) to consider:
Thank you for your contribution! Sashiko AI review found 1 potential issue(s) to consider:
Pre-existing issues:
- [Critical] Unchecked memory allocation failure in damon_apply_min_nr_regions() leads to heap corruption and infinite loops --
--- Patch [7]: [PATCH 07/19] mm/damon/core: use abs_diff() instead of abs() --- commit 168e2738a1f4077551ffee47ed4ecb0a582831f3
Author: SJ Park <[email protected]>
mm/damon/core: use abs_diff() instead of abs()
Replaces abs() with abs_diff() in damon_merge_regions_of() to prevent silent integer overflow when casting unsigned int to signed int.
Quoted 4 lines
mm/damon/core.c +0
-0
[ ... ]
mm/damon/core.c static void damon_merge_regions_of(struct damon_target *t, unsigned int thres, · line 3275
Quoted 9 lines
mm/damon/core.c +1
-1@@ -3269,7 +3269,7 @@ static void damon_merge_regions_of(struct damon_target *t, unsigned int thres, r->age++;if (prev && prev->ar.end == r->ar.start && -abs (prev->nr_accesses - r->nr_accesses) <= thres && +abs_diff (prev->nr_accesses, r->nr_accesses) <= thres &&damon_sz_region (prev) +damon_sz_region (r) <= sz_limit)damon_merge_two_regions (t, prev, r);else
[Severity: Critical]
This is a pre-existing issue and was not introduced by the patch under review, but I noticed a potential memory corruption issue in damon_apply_min_nr_regions() when a memory allocation fails.
If damon_split_region_at() fails to allocate memory, it aborts silently and leaves r->ar.end unchanged.
The loop then unconditionally advances r:
mm/damon/core.c:damon_apply_min_nr_regions() {
damon_for_each_target(t, ctx) {
damon_for_each_region_safe(r, next, t) {
while (damon_sz_region(r) > max_region_sz) {
damon_split_region_at(t, r, max_region_sz);
r = damon_next_region(r);
}
}
}
}Can this corrupt memory or cause infinite loops if the allocation fails on the last region in the list?
If this occurs on the last region in the target's list,
r = damon_next_region(r) resolves to the list head (&t->regions_list).
Because the list head is embedded inside struct damon_target, container_of() returns a bogus struct damon_region pointer pointing before the damon_target object.
The next iteration of the while loop would read r->ar.start and r->ar.end from this invalid memory. If the computed difference exceeds max_region_sz, it enters the loop again. A successful damon_split_region_at() could then write the new region's start address to r->ar.end, corrupting memory before the damon_target structure.
Signature · 1 line
Sashiko AI review · https://sashiko.dev/#/patchset/[email protected]?part=7
SJ Park
maintainerRe: [PATCH 07/19] mm/damon/core: use abs_diff() instead of abs()
Quoted 63 lines · On Fri, 10 Jul 2026 14:10:54 +0000 [email protected] wrote:
Thank you for your contribution! Sashiko AI review found 1 potential issue(s) to consider:
Pre-existing issues:
- [Critical] Unchecked memory allocation failure indamon_apply_min_nr_regions()leads to heap corruption and infinite loops ----- Patch [7]: [PATCH 07/19]
mm/damon/core: useabs_diff()instead ofabs()--- commit168e2738a1f4077551ffee47ed4ecb0a582831f3
Author: SJ Park <[email protected]>
mm/damon/core: useabs_diff()instead ofabs()Replaces
abs()withabs_diff()indamon_merge_regions_of()to prevent silent integer overflow when casting unsigned int to signed int.Quoted 4 lines
mm/damon/core.c +0
-0[ ... ]
mm/damon/core.c static void damon_merge_regions_of(struct damon_target *t, unsigned int thres, · line 3275
Quoted 9 lines
mm/damon/core.c +1
-1@@ -3269,7 +3269,7 @@ static void damon_merge_regions_of(struct damon_target *t, unsigned int thres, r->age++;if (prev && prev->ar.end == r->ar.start && -abs (prev->nr_accesses - r->nr_accesses) <= thres && +abs_diff (prev->nr_accesses, r->nr_accesses) <= thres &&damon_sz_region (prev) +damon_sz_region (r) <= sz_limit)damon_merge_two_regions (t, prev, r);else [Severity: Critical]
This is a pre-existing issue and was not introduced by the patch under review, but I noticed a potential memory corruption issue indamon_apply_min_nr_regions()when a memory allocation fails.If
damon_split_region_at()fails to allocate memory, it aborts silently and leavesr->ar.endunchanged.The loop then unconditionally advances r:
mm/damon/core.c:damon_apply_min_nr_regions() { damon_for_each_target(t, ctx) { damon_for_each_region_safe(r, next, t) { while (damon_sz_region(r) > max_region_sz) { damon_split_region_at(t, r, max_region_sz); r = damon_next_region(r); } } } }Can this corrupt memory or cause infinite loops if the allocation fails on the last region in the list?
If this occurs on the last region in the target's list,
r =damon_next_region(r)resolves to the list head (&t->regions_list).Because the list head is embedded inside struct
damon_target,container_of()returns a bogus structdamon_regionpointer pointing before thedamon_targetobject.
Quoted 5 lines
The next iteration of the while loop would read
r->ar.startandr->ar.endfrom this invalid memory. If the computed difference exceedsmax_region_sz, it enters the loop again. A successfuldamon_split_region_at()could then write the new region's start address tor->ar.end, corrupting memory before thedamon_targetstructure.
Good finding. Not a blocker of this patch, though. I will separately work on this.
Quoted 3 lines
Signature · 2 lines
-- Sashiko AI review · https://sashiko.dev/#/patchset/[email protected]?part=7
Thanks,
SJ
SJ Park
maintainerPATCH 8/19 mm/damon/core: extend merge function to work with probe hits
In reply to SJ ParkWhen probe weights are set, users may want DAMON monitoring results to be optimized for the weights. For that, regions adjustment should work for the weighted sum of probe hits. Extend damon_merge_regions_of() to detect if the weights are set, and work with probe hits in the case.
The weights setup detection function is incomplete. It always returns false. It is intentional, so that more changes to completely support weights can be made in an incremental but safe way. Until the function is completed, all changes depend on it is no-op, so DAMON works in the current mode.
--- mm/damon/core.c | 49 +++++++++++++++++++++++++++++-------- mm/damon/tests/core-kunit.h | 13 ++++++++-- 2 files changed, 50 insertions(+), 12 deletions(-)
mm/damon/core.c +39 -10
@@ -209,6 +209,11 @@ static struct damon_probe *damon_nth_probe(int n, struct damon_ctx *ctx)return NULL ; } +static bool damon_has_probe_weights (struct damon_ctx *c) +{ +return false; +} +/* * damon_mvsum() - Returns pseudo moving sum value for a time window. * @current_nr: The value of the current aggregation window.
@@ -3248,6 +3253,16 @@ static void damon_merge_two_regions(struct damon_target *t,damon_destroy_region (r, t); } +static unsigned int damon_merge_score (struct damon_region *r,bool last, +struct damon_ctx *ctx,bool use_probe_hits) +{ +if (use_probe_hits) +return damon_probe_hits_wsum (r, last, ctx); +if (last) +return r->last_nr_accesses; +return r->nr_accesses; +} +/* * Merge adjacent regions having similar access frequencies *
@@ -3256,24 +3271,38 @@ static void damon_merge_two_regions(struct damon_target *t,* sz_limit size upper limit of each region */ static void damon_merge_regions_of (struct damon_target *t,unsigned int thres, -unsigned long sz_limit) +unsigned long sz_limit,struct damon_ctx *ctx) {struct damon_region *r, *prev =NULL , *next; +bool use_probe_hits =damon_has_probe_weights (ctx);damon_for_each_region_safe (r, next, t) { -if (abs_diff (r->nr_accesses, r->last_nr_accesses) > thres) +unsigned int score, last_score, diff; + + score =damon_merge_score (r, false, ctx, use_probe_hits); + last_score =damon_merge_score (r, true, ctx, use_probe_hits); + +if (abs_diff (score, last_score) > thres) r->age =0 ; -else if ((r->nr_accesses ==0 ) != (r->last_nr_accesses ==0 )) +else if ((score ==0 ) != (last_score ==0 )) r->age =0 ;else r->age++; -if (prev && prev->ar.end == r->ar.start && -abs_diff (prev->nr_accesses, r->nr_accesses) <= thres && -damon_sz_region (prev) +damon_sz_region (r) <= sz_limit) -damon_merge_two_regions (t, prev, r); -else - prev = r; +if (!prev) + goto set_prev_continue; +if (prev->ar.end != r->ar.start) + goto set_prev_continue; + diff =abs_diff (score,damon_merge_score (prev, false, ctx, + use_probe_hits)); +if (diff > thres) + goto set_prev_continue; +if (damon_sz_region (prev) +damon_sz_region (r) > sz_limit) + goto set_prev_continue; +damon_merge_two_regions (t, prev, r); +continue ; +set_prev_continue: + prev = r; } }
@@ -3306,7 +3335,7 @@ static void kdamond_merge_regions(struct damon_ctx *c, unsigned int threshold, do { nr_regions = 0; damon_for_each_target(t, c) { - damon_merge_regions_of(t, threshold, sz_limit); + damon_merge_regions_of(t, threshold, sz_limit, c); nr_regions += damon_nr_regions(t); } threshold = max(1, threshold * 2);
mm/damon/tests/core-kunit.h +11 -2
@@ -226,6 +226,7 @@ static struct damon_region *__nth_region_of(struct damon_target *t, int idx)static void damon_test_merge_regions_of (struct kunit *test) { +struct damon_ctx *ctx;struct damon_target *t;struct damon_region *r;unsigned long sa[] = {0 ,100 ,114 ,122 ,130 ,156 ,170 ,184 ,230 };
@@ -236,20 +237,27 @@ static void damon_test_merge_regions_of(struct kunit *test)unsigned long eaddrs[] = {112 ,130 ,156 ,170 ,230 ,10170 };int i; + ctx =damon_new_ctx (); +if (!ctx) +kunit_skip (test,"ctx alloc fail" ); + t =damon_new_target (); -if (!t) +if (!t) { +damon_destroy_ctx (ctx);kunit_skip (test,"target alloc fail" ); + }for (i =0 ; i <ARRAY_SIZE (sa); i++) { r =damon_new_region (sa[i], ea[i]);if (!r) {damon_free_target (t); +damon_destroy_ctx (ctx);kunit_skip (test,"region alloc fail" ); } r->nr_accesses = nrs[i];damon_add_region (r, t); } -damon_merge_regions_of (t,9 ,9999 ); +damon_merge_regions_of (t,9 ,9999 , ctx);/* 0-112, 114-130, 130-156, 156-170, 170-230, 230-10170 */ KUNIT_EXPECT_EQ (test,damon_nr_regions (t),6u );for (i =0 ; i <6 ; i++) {
@@ -258,6 +266,7 @@ static void damon_test_merge_regions_of(struct kunit *test)KUNIT_EXPECT_EQ (test, r->ar.end, eaddrs[i]); }damon_free_target (t); +damon_destroy_ctx (ctx); }static void damon_test_split_regions_of (struct kunit *test)
Signature · 1 line
2.47.3
[email protected]
AI reviewRe: [PATCH 08/19] mm/damon/core: extend merge function to work with probe hits
Thank you for your contribution! Sashiko AI review found 5 potential issue(s) to consider:
Thank you for your contribution! Sashiko AI review found 5 potential issue(s) to consider:
New issues:
- [Medium] Unscaled merge threshold breaks region merging when using weighted probe hits.
- [Medium] Potential 32-bit integer overflow in damon_probe_hits_wsum() when accumulating weighted sums.
Pre-existing issues:
- [High] Region ages are evaluated and mutated inside a retry loop, leading to age corruption.
- [High] Calculations for merged regions' weighted averages overflow on 32-bit architectures.
- [Medium] Test NULL pointer dereference in damon_test_merge_regions_of.
--
--- Patch [8]: [PATCH 08/19] mm/damon/core: extend merge function to work with probe hits --- commit 5e9a094bb8d36feea59f27615cb45bcbce00e4c3
Author: SJ Park <[email protected]>
mm/damon/core: extend merge function to work with probe hits
When probe weights are set, users may want DAMON monitoring results to be optimized for the weights. For that, regions adjustment should work for the weighted sum of probe hits. Extend damon_merge_regions_of() to detect if the weights are set, and work with probe hits in the case.
Quoted 4 lines
mm/damon/core.c +0
-0
[ ... ]
mm/damon/core.c static void damon_merge_two_regions(struct damon_target *t,
Quoted 1 line
mm/damon/core.c +0
-0@@ -3248,6 +3253,16 @@ static void damon_merge_two_regions(struct damon_target *t,
[Severity: High]
This is a pre-existing issue, but can the calculations for merged regions' weighted averages overflow on 32-bit architectures?
mm/damon/core.c:damon_merge_two_regions() {
unsigned long sz_l = damon_sz_region(l), sz_r = damon_sz_region(r);
...
l->nr_accesses = (l->nr_accesses * sz_l + r->nr_accesses * sz_r) /
(sz_l + sz_r);
l->age = (l->age * sz_l + r->age * sz_r) / (sz_l + sz_r);
...
}Since sz_l and sz_r are unsigned long (32 bits on 32-bit architectures), multiplying them by a 32-bit unsigned int produces a 32-bit intermediate product. For large region sizes, this might wrap around UINT_MAX prior to division, leading to incorrect page reclaim decisions.
mm/damon/core.c static void damon_merge_two_regions(struct damon_target *t, · line 3260
Quoted 8 lines
mm/damon/core.c +5
-0damon_destroy_region (r, t); } +static unsigned int damon_merge_score (struct damon_region *r,bool last, +struct damon_ctx *ctx,bool use_probe_hits) +{ +if (use_probe_hits) +return damon_probe_hits_wsum (r, last, ctx);
[Severity: Medium]
Can accumulating the weighted sums in damon_probe_hits_wsum() overflow a 32-bit integer?
mm/damon/core.c:damon_probe_hits_wsum() {
...
unsigned int sum = 0;
...
if (last)
sum += r->last_probe_hits[i++] * probe->weight;
else
sum += r->probe_hits[i++] * probe->weight;
...
}If user space configures a large weight, multiplying it by the probe hits across multiple probes might easily exceed UINT_MAX, causing silent overflow. This wrapped around value would then corrupt the region merging heuristic.
Quoted 16 lines
mm/damon/core.c +6
-1+if (last) +return r->last_nr_accesses; +return r->nr_accesses; +} +/* * Merge adjacent regions having similar access frequencies * @@ -3256,24 +3271,38 @@ static void damon_merge_two_regions(struct damon_target *t,* sz_limit size upper limit of each region */ static void damon_merge_regions_of (struct damon_target *t,unsigned int thres, -unsigned long sz_limit) +unsigned long sz_limit,struct damon_ctx *ctx) {struct damon_region *r, *prev =NULL , *next;
mm/damon/core.c static void damon_merge_two_regions(struct damon_target *t, · line 3285
Quoted 10 lines
mm/damon/core.c +7
-1+bool use_probe_hits =damon_has_probe_weights (ctx);damon_for_each_region_safe (r, next, t) { -if (abs_diff (r->nr_accesses, r->last_nr_accesses) > thres) +unsigned int score, last_score, diff; + + score =damon_merge_score (r, false, ctx, use_probe_hits); + last_score =damon_merge_score (r, true, ctx, use_probe_hits); + +if (abs_diff (score, last_score) > thres)
[Severity: Medium]
When probe weights are enabled and use_probe_hits is true, score and last_score are scaled by probe->weight via damon_probe_hits_wsum(). However, kdamond_merge_regions() calculates the initial threshold using unweighted access metrics. Will comparing this unscaled threshold against the newly scaled weighted scores prevent region merges and force the retry loop to inappropriately scale the threshold?
mm/damon/core.c static void damon_merge_two_regions(struct damon_target *t, · line 3290
Quoted 6 lines
mm/damon/core.c +1
-1r->age =0 ; - else if ((r->nr_accesses == 0) != (r->last_nr_accesses == 0)) + else if ((score == 0) != (last_score == 0)) r->age = 0; else r->age++;
[Severity: High]
This is a pre-existing issue, but does mutating the region age inside this retry loop corrupt the age metric?
In kdamond_merge_regions(), damon_merge_regions_of() is called inside a do-while loop that repeats if nr_regions > max_nr_regions. Every time damon_merge_regions_of() executes, it unconditionally mutates r->age for every region based on the current threshold. Because the outer loop doubles the threshold and retries, r->age might be artificially inflated or repeatedly reset to 0 multiple times per aggregation interval.
[ ... ]
Quoted 4 lines
mm/damon/tests/core-kunit.h +0
-0
[ ... ]
mm/damon/tests/core-kunit.h static void damon_test_merge_regions_of(struct kunit *test) · line 267
Quoted 3 lines
mm/damon/tests/core-kunit.h +0
-0@@ -258,6 +266,7 @@ static void damon_test_merge_regions_of(struct kunit *test)KUNIT_EXPECT_EQ (test, r->ar.end, eaddrs[i]); }
[Severity: Medium]
This is a pre-existing issue, but could this test cause a NULL pointer dereference and leak test resources?
If the internal damon_merge_regions_of logic unexpectedly merges too many regions, damon_nr_regions(t) might fall below 6. The KUNIT_EXPECT_EQ check logs a failure but does not halt the test.
The subsequent loop executes 6 times regardless:
mm/damon/tests/core-kunit.h:damon_test_merge_regions_of() {
...
for (i = 0; i < 6; i++) {
r = __nth_region_of(t, i);
KUNIT_EXPECT_EQ(test, r->ar.start, saddrs[i]);
...
}This would cause __nth_region_of() to return NULL, which is immediately dereferenced in the KUNIT_EXPECT_EQ macro without validation.
Quoted 3 lines
mm/damon/tests/core-kunit.h +1
-0damon_free_target (t); +damon_destroy_ctx (ctx); }
Signature · 1 line
Sashiko AI review · https://sashiko.dev/#/patchset/[email protected]?part=8
SJ Park
maintainerRe: [PATCH 08/19] mm/damon/core: extend merge function to work with probe hits
Quoted 42 lines · On Fri, 10 Jul 2026 14:05:31 +0000 [email protected] wrote:
Thank you for your contribution! Sashiko AI review found 5 potential issue(s) to consider:
New issues:
- [Medium] Unscaled merge threshold breaks region merging when using weighted probe hits.
- [Medium] Potential 32-bit integer overflow indamon_probe_hits_wsum()when accumulating weighted sums.Pre-existing issues:
- [High] Region ages are evaluated and mutated inside a retry loop, leading to age corruption.
- [High] Calculations for merged regions' weighted averages overflow on 32-bit architectures.
- [Medium] Test NULL pointer dereference indamon_test_merge_regions_of.
----- Patch [8]: [PATCH 08/19]
mm/damon/core: extend merge function to work with probe hits --- commit5e9a094bb8d36feea59f27615cb45bcbce00e4c3
Author: SJ Park <[email protected]>
mm/damon/core: extend merge function to work with probe hitsWhen probe weights are set, users may want DAMON monitoring results to be optimized for the weights. For that, regions adjustment should work for the weighted sum of probe hits. Extend
damon_merge_regions_of()to detect if the weights are set, and work with probe hits in the case.Quoted 4 lines
mm/damon/core.c +0
-0[ ... ]
mm/damon/core.c static void damon_merge_two_regions(struct damon_target *t,
Quoted 1 line
mm/damon/core.c +0
-0@@ -3248,6 +3253,16 @@ static void damon_merge_two_regions(struct damon_target *t,[Severity: High]
This is a pre-existing issue, but can the calculations for merged regions' weighted averages overflow on 32-bit architectures?mm/damon/core.c:damon_merge_two_regions() { unsigned long sz_l = damon_sz_region(l), sz_r = damon_sz_region(r); ... l->nr_accesses = (l->nr_accesses * sz_l + r->nr_accesses * sz_r) / (sz_l + sz_r); l->age = (l->age * sz_l + r->age * sz_r) / (sz_l + sz_r); ... }
Quoted 4 lines
Since
sz_landsz_rare unsigned long (32 bits on 32-bit architectures), multiplying them by a 32-bit unsigned int produces a 32-bit intermediate product. For large region sizes, this might wrap aroundUINT_MAXprior to division, leading to incorrect page reclaim decisions.
Known low priority issue. No blocker.
Quoted 24 lines
mm/damon/core.c static void damon_merge_two_regions(struct damon_target *t, · line 3260
Quoted 9 lines
mm/damon/core.c +5
-0damon_destroy_region (r, t); } +static unsigned int damon_merge_score (struct damon_region *r,bool last, +struct damon_ctx *ctx,bool use_probe_hits) +{ +if (use_probe_hits) +return damon_probe_hits_wsum (r, last, ctx);[Severity: Medium]
Can accumulating the weighted sums indamon_probe_hits_wsum()overflow a 32-bit integer?mm/damon/core.c:damon_probe_hits_wsum() { ... unsigned int sum = 0; ... if (last) sum += r->last_probe_hits[i++] * probe->weight; else sum += r->probe_hits[i++] * probe->weight; ... }
Quoted 4 lines
If user space configures a large weight, multiplying it by the probe hits across multiple probes might easily exceed
UINT_MAX, causing silent overflow. This wrapped around value would then corrupt the region merging heuristic.
No issue. Nobody calls this function at the moment. A later patch in this series will prevent such user input before this can be really used.
Quoted 19 lines
Quoted 19 lines
mm/damon/core.c +7
-1+if (last) +return r->last_nr_accesses; +return r->nr_accesses; +} +/* * Merge adjacent regions having similar access frequencies * @@ -3256,24 +3271,38 @@ static void damon_merge_two_regions(struct damon_target *t,* sz_limit size upper limit of each region */ static void damon_merge_regions_of (struct damon_target *t,unsigned int thres, -unsigned long sz_limit) +unsigned long sz_limit,struct damon_ctx *ctx) {struct damon_region *r, *prev =NULL , *next; +bool use_probe_hits =damon_has_probe_weights (ctx);
Quoted 15 lines
mm/damon/core.c static void damon_merge_two_regions(struct damon_target *t, · line 3285
Quoted 8 lines
mm/damon/core.c +6
-1damon_for_each_region_safe (r, next, t) { -if (abs_diff (r->nr_accesses, r->last_nr_accesses) > thres) +unsigned int score, last_score, diff; + + score =damon_merge_score (r, false, ctx, use_probe_hits); + last_score =damon_merge_score (r, true, ctx, use_probe_hits); + +if (abs_diff (score, last_score) > thres)[Severity: Medium]
When probe weights are enabled anduse_probe_hitsis true, score andlast_scoreare scaled byprobe->weightviadamon_probe_hits_wsum(). However,kdamond_merge_regions()calculates the initial threshold using unweighted access metrics. Will comparing this unscaled threshold against the newly scaled weighted scores prevent region merges and force the retry loop to inappropriately scale the threshold?
No issue. damon_has_probe_weights() always return false. A later patch in this series will change that before damon_has_probe_weights() can return true.
Quoted 11 lines
mm/damon/core.c static void damon_merge_two_regions(struct damon_target *t, · line 3290
Quoted 7 lines
mm/damon/core.c +1
-1r->age =0 ; - else if ((r->nr_accesses == 0) != (r->last_nr_accesses == 0)) + else if ((score == 0) != (last_score == 0)) r->age = 0; else r->age++;[Severity: High]
This is a pre-existing issue, but does mutating the region age inside this retry loop corrupt the age metric?
Quoted 6 lines
In
kdamond_merge_regions(),damon_merge_regions_of()is called inside a do-while loop that repeats ifnr_regions>max_nr_regions. Every timedamon_merge_regions_of()executes, it unconditionally mutatesr->agefor every region based on the current threshold. Because the outer loop doubles the threshold and retries,r->agemight be artificially inflated or repeatedly reset to 0 multiple times per aggregation interval.
Known issue. I'm working on this.
Quoted 28 lines
[ ... ]
Quoted 4 lines
mm/damon/tests/core-kunit.h +0
-0[ ... ]
mm/damon/tests/core-kunit.h static void damon_test_merge_regions_of(struct kunit *test) · line 267
Quoted 3 lines
mm/damon/tests/core-kunit.h +0
-0@@ -258,6 +266,7 @@ static void damon_test_merge_regions_of(struct kunit *test)KUNIT_EXPECT_EQ (test, r->ar.end, eaddrs[i]); }[Severity: Medium]
This is a pre-existing issue, but could this test cause a NULL pointer dereference and leak test resources?If the internal
damon_merge_regions_oflogic unexpectedly merges too many regions,damon_nr_regions(t)might fall below 6. TheKUNIT_EXPECT_EQcheck logs a failure but does not halt the test.The subsequent loop executes 6 times regardless:
mm/damon/tests/core-kunit.h:damon_test_merge_regions_of() { ... for (i = 0; i < 6; i++) { r = __nth_region_of(t, i); KUNIT_EXPECT_EQ(test, r->ar.start, saddrs[i]); ... }
Quoted 2 lines
This would cause
__nth_region_of()to return NULL, which is immediately dereferenced in theKUNIT_EXPECT_EQmacro without validation.
Good catch. No blocker, though. I will separately work on this.
Quoted 7 lines
Quoted 4 lines
mm/damon/tests/core-kunit.h +1
-0damon_free_target (t); +damon_destroy_ctx (ctx); }Signature · 1 line
Sashiko AI review · https://sashiko.dev/#/patchset/[email protected]?part=8
Thanks,
SJ
SJ Park
maintainerPATCH 9/19 mm/damon/core: disallow probe_hits overflow on attrs only monitoring
In reply to SJ ParkWhen any damon_probe->weight is set, DAMON will do only probe monitoring. probe_hits is 'unsigned char'. It could overflow when the aggregation interval is larger than the sampling interval times 256. damon_as_probe_weights() always return false, so such overflow cannot happen. Even if it happens, it only degrades the monitoring results.
That said, the overflow is not intentional. It is better to be prevented as long as the cost is not expensive. Disallow the overflow by adding a validation logic on the core layer parameters validation function.
--- mm/damon/core.c | 16 ++++++++++++++++ 1 file changed, 16 insertions(+)
mm/damon/core.c +16 -0
@@ -1332,6 +1332,19 @@ static void damos_set_filters_default_reject(struct damos *s)damos_filters_default_reject (&s->ops_filters); } +static bool damon_valid_probe_params (struct damon_ctx *ctx) +{ +unsigned long sample_interval; + +if (!damon_has_probe_weights (ctx)) +return true; + + sample_interval = ctx->attrs.sample_interval ? :1 ; +if (ctx->attrs.aggr_interval / sample_interval >U8_MAX ) +return false; +return true; +} +/* * damos_commit_dests() - Copy migration destinations from @src to @dst. * @dst: Destination structure to update.
@@ -1736,6 +1749,9 @@ static int __damon_commit_ctx(struct damon_ctx *dst, struct damon_ctx *src) } } +if (!damon_valid_probe_params (src)) +return -EINVAL ; + err =damon_commit_schemes (dst, src);if (err)return err;
Signature · 1 line
2.47.3
SJ Park
maintainerPATCH 10/19 mm/damon/core: validate params for probe hits weighted sum overflow
In reply to SJ Parkdamon_probe_hits_wsum() could overflow in weird setups. Users could set the weight unreasonably high. They could also set the aggregation interval unreasonably high compared to the sampling interval. Such user setup is unlikely. Even if such setup is used, damon_has_probe_weights() always returns false, so the overflow cannot happen. The function may be completed in future, though. Even if the overflow happens, the consequence is degraded monitoring results for the unreasonable setup. It is just a trivial user experience issue.
It is still better to be prevented unless the cost is expensive. Avoid the overflow by adding the parameter validation in the core layer parameters validation function.
--- mm/damon/core.c | 15 +++++++++++++++ 1 file changed, 15 insertions(+)
mm/damon/core.c +15 -0
@@ -1335,6 +1335,9 @@ static void damos_set_filters_default_reject(struct damos *s)static bool damon_valid_probe_params (struct damon_ctx *ctx) {unsigned long sample_interval; +unsigned char max_probe_hits; +struct damon_probe *probe; +unsigned int wsum, wsum_to_add;if (!damon_has_probe_weights (ctx))return true;
@@ -1342,6 +1345,18 @@ static bool damon_valid_probe_params(struct damon_ctx *ctx) sample_interval = ctx->attrs.sample_interval ? :1 ;if (ctx->attrs.aggr_interval / sample_interval >U8_MAX )return false; + +/* invalid if probe hits weighted sum can overflow */ + max_probe_hits =damon_nr_samples_per_aggr (&ctx->attrs); + wsum =0 ; +damon_for_each_probe (probe, ctx) { +if (probe->weight >UINT_MAX / max_probe_hits) +return false; + wsum_to_add = probe->weight * max_probe_hits; +if (UINT_MAX - wsum < wsum_to_add) +return false; + wsum += wsum_to_add; + }return true; }
Signature · 1 line
2.47.3
[email protected]
AI reviewRe: [PATCH 10/19] mm/damon/core: validate params for probe hits weighted sum overflow
Thank you for your contribution! Sashiko AI review found 2 potential issue(s) to consider:
Thank you for your contribution! Sashiko AI review found 2 potential issue(s) to consider:
Pre-existing issues:
- [High] Pre-existing integer overflow in damon_merge_two_regions() during weighted average calculations.
- [High] Pre-existing integer overflows in damon_sample_bp_to_count() and damon_sample_count_to_bp(). --
--- Patch [10]: [PATCH 10/19] mm/damon/core: validate params for probe hits weighted sum overflow --- commit 74455514643a15cd1b70c8a9afa3237ba4226d34
Author: SJ Park <[email protected]> Date: Fri Jul 10 13:46:39 2026 +0000
mm/damon/core: validate params for probe hits weighted sum overflow
This commit adds parameter validation to prevent integer overflows in probe hits weighted sum calculations. It ensures that user-configured probe weights do not cause the weighted sum of probe hits to exceed the maximum possible value during monitoring.
Quoted 23 lines
mm/damon/core.c +8
-0@@ -1335,6 +1335,9 @@ static void damos_set_filters_default_reject(struct damos *s)static bool damon_valid_probe_params (struct damon_ctx *ctx) {unsigned long sample_interval; +unsigned char max_probe_hits; +struct damon_probe *probe; +unsigned int wsum, wsum_to_add;if (!damon_has_probe_weights (ctx))return true;@@ -1342,6 +1345,18 @@ static bool damon_valid_probe_params(struct damon_ctx *ctx) sample_interval = ctx->attrs.sample_interval ? :1 ;if (ctx->attrs.aggr_interval / sample_interval >U8_MAX )return false; + +/* invalid if probe hits weighted sum can overflow */ + max_probe_hits =damon_nr_samples_per_aggr (&ctx->attrs); + wsum =0 ; +damon_for_each_probe (probe, ctx) {
mm/damon/core.c static bool damon_valid_probe_params(struct damon_ctx *ctx) · line 1362
Quoted 10 lines
mm/damon/core.c +7
-0+if (probe->weight >UINT_MAX / max_probe_hits) +return false; + wsum_to_add = probe->weight * max_probe_hits; +if (UINT_MAX - wsum < wsum_to_add) +return false; + wsum += wsum_to_add; + }return true; }
[Severity: High]
This is a pre-existing issue, but does damon_merge_two_regions() suffer from an unsigned long overflow during average calculations?
mm/damon/core.c:damon_merge_two_regions() {
...
l->nr_accesses = (l->nr_accesses * sz_l + r->nr_accesses * sz_r) /
(sz_l + sz_r);
l->age = (l->age * sz_l + r->age * sz_r) / (sz_l + sz_r);
...
}During the calculation of the merged region metrics, if a region size reaches 1GB and nr_accesses is just 4, their product is 4,294,967,296. On 32-bit architectures where unsigned long is 32 bits, this will instantly overflow.
Additionally, on 64-bit architectures, the age variable could grow indefinitely and overflow if a region becomes very large over a long uptime. Can this lead to corrupted statistics and misfiring of memory management actions?
[Severity: High]
This is a pre-existing issue, but I noticed a potential integer overflow in damon_sample_bp_to_count() and damon_sample_count_to_bp():
mm/damon/core.c:damon_sample_bp_to_count() {
return bp * damon_nr_samples_per_aggr(attrs) / 10000;
}mm/damon/core.c:damon_sample_count_to_bp() {
return mult_frac(count, 10000, damon_nr_samples_per_aggr(attrs));
}Can these calculations overflow? The functions perform 32-bit multiplication of bp (or the remainder in mult_frac) and the max samples using unsigned int arithmetic.
If max_samples (aggr_interval / sample_interval) exceeds 429,496, which is possible with a high aggregation interval compared to the sampling interval (e.g., 5s aggregation and 10us sample intervals), the result could exceed UINT_MAX (4,294,967,295) and silently overflow. Could this corrupt monitoring region access counts during dynamic DAMON attribute updates?
Signature · 1 line
Sashiko AI review · https://sashiko.dev/#/patchset/[email protected]?part=10
SJ Park
maintainerRe: [PATCH 10/19] mm/damon/core: validate params for probe hits weighted sum overflow
Quoted 65 lines · On Fri, 10 Jul 2026 14:07:43 +0000 [email protected] wrote:
Thank you for your contribution! Sashiko AI review found 2 potential issue(s) to consider:
Pre-existing issues:
- [High] Pre-existing integer overflow indamon_merge_two_regions()during weighted average calculations.
- [High] Pre-existing integer overflows indamon_sample_bp_to_count()anddamon_sample_count_to_bp(). ----- Patch [10]: [PATCH 10/19]
mm/damon/core: validate params for probe hits weighted sum overflow --- commit74455514643a15cd1b70c8a9afa3237ba4226d34Author: SJ Park <[email protected]> Date: Fri Jul 10 13:46:39 2026 +0000
mm/damon/core: validate params for probe hits weighted sum overflowThis commit adds parameter validation to prevent integer overflows in probe hits weighted sum calculations. It ensures that user-configured probe weights do not cause the weighted sum of probe hits to exceed the maximum possible value during monitoring.
Quoted 23 lines
mm/damon/core.c +8
-0@@ -1335,6 +1335,9 @@ static void damos_set_filters_default_reject(struct damos *s)static bool damon_valid_probe_params (struct damon_ctx *ctx) {unsigned long sample_interval; +unsigned char max_probe_hits; +struct damon_probe *probe; +unsigned int wsum, wsum_to_add;if (!damon_has_probe_weights (ctx))return true;@@ -1342,6 +1345,18 @@ static bool damon_valid_probe_params(struct damon_ctx *ctx) sample_interval = ctx->attrs.sample_interval ? :1 ;if (ctx->attrs.aggr_interval / sample_interval >U8_MAX )return false; + +/* invalid if probe hits weighted sum can overflow */ + max_probe_hits =damon_nr_samples_per_aggr (&ctx->attrs); + wsum =0 ; +damon_for_each_probe (probe, ctx) {mm/damon/core.c static bool damon_valid_probe_params(struct damon_ctx *ctx) · line 1362
Quoted 10 lines
mm/damon/core.c +7
-0+if (probe->weight >UINT_MAX / max_probe_hits) +return false; + wsum_to_add = probe->weight * max_probe_hits; +if (UINT_MAX - wsum < wsum_to_add) +return false; + wsum += wsum_to_add; + }return true; }[Severity: High]
This is a pre-existing issue, but doesdamon_merge_two_regions()suffer from an unsigned long overflow during average calculations?mm/damon/core.c:damon_merge_two_regions() { ... l->nr_accesses = (l->nr_accesses * sz_l + r->nr_accesses * sz_r) / (sz_l + sz_r); l->age = (l->age * sz_l + r->age * sz_r) / (sz_l + sz_r); ... }
Quoted 7 lines
During the calculation of the merged region metrics, if a region size reaches 1GB and
nr_accessesis just 4, their product is 4,294,967,296. On 32-bit architectures where unsigned long is 32 bits, this will instantly overflow.Additionally, on 64-bit architectures, the age variable could grow indefinitely and overflow if a region becomes very large over a long uptime. Can this lead to corrupted statistics and misfiring of memory management actions?
Known low priority issue.
Quoted 18 lines
[Severity: High]
This is a pre-existing issue, but I noticed a potential integer overflow indamon_sample_bp_to_count()anddamon_sample_count_to_bp():mm/damon/core.c:damon_sample_bp_to_count() { return bp * damon_nr_samples_per_aggr(attrs) / 10000; }mm/damon/core.c:damon_sample_count_to_bp() { return mult_frac(count, 10000, damon_nr_samples_per_aggr(attrs)); }Can these calculations overflow? The functions perform 32-bit multiplication of bp (or the remainder in
mult_frac) and the max samples using unsigned int arithmetic.
Quoted 5 lines
If
max_samples(aggr_interval/sample_interval) exceeds 429,496, which is possible with a high aggregation interval compared to the sampling interval (e.g., 5s aggregation and 10us sample intervals), the result could exceedUINT_MAX(4,294,967,295) and silently overflow. Could this corrupt monitoring region access counts during dynamic DAMON attribute updates?
Known low priority issue.
Quoted 3 lines
Signature · 2 lines
-- Sashiko AI review · https://sashiko.dev/#/patchset/[email protected]?part=10
Thanks,
SJ
SJ Park
maintainerPATCH 11/19 mm/damon/core: disable access monitoring when probe weights are set
In reply to SJ ParkWhen users set probe weights, they are interested in the data attributes. Not necessarily they are interested in data access patterns. Disable the data access monitoring in the case.
--- mm/damon/core.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-)
mm/damon/core.c +3 -2
@@ -3763,17 +3763,18 @@ static int kdamond_fn(void *data)unsigned long next_aggregation_sis = ctx->next_aggregation_sis;unsigned long next_ops_update_sis = ctx->next_ops_update_sis;unsigned long sample_interval = ctx->attrs.sample_interval; +bool access_check_disabled =damon_has_probe_weights (ctx);if (kdamond_wait_activation (ctx))break ; -if (ctx->ops.prepare_access_checks) +if (!access_check_disabled && ctx->ops.prepare_access_checks) ctx->ops.prepare_access_checks (ctx);kdamond_usleep (sample_interval); ctx->passed_sample_intervals++; -if (ctx->ops.check_accesses) +if (!access_check_disabled && ctx->ops.check_accesses) max_nr_accesses = ctx->ops.check_accesses (ctx);if (ctx->ops.apply_probes) ctx->ops.apply_probes (ctx, false, false);
Signature · 1 line
2.47.3
SJ Park
maintainerPATCH 12/19 mm/damon/core: set samples in apply_probes() if probe weights are set
In reply to SJ ParkWhen probe weights are set, the prepare_access_checks() ops callback is not invoked, so sampling addresses of regions are unset. Ask apply_probes() to set those together in the case.
--- mm/damon/core.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)
mm/damon/core.c +2 -1
@@ -3777,7 +3777,8 @@ static int kdamond_fn(void *data)if (!access_check_disabled && ctx->ops.check_accesses) max_nr_accesses = ctx->ops.check_accesses (ctx);if (ctx->ops.apply_probes) - ctx->ops.apply_probes (ctx, false, false); + ctx->ops.apply_probes (ctx, access_check_disabled, + false);if (time_after_eq (ctx->passed_sample_intervals, next_aggregation_sis)) {
Signature · 1 line
2.47.3
[email protected]
AI reviewRe: [PATCH 12/19] mm/damon/core: set samples in apply_probes() if probe weights are set
Thank you for your contribution! Sashiko AI review found 1 potential issue(s) to consider: - [Medium] kdamond_merge_regions() uses a stale or 0 threshold (max_nr_accesses) when probe weights are…
Thank you for your contribution! Sashiko AI review found 1 potential issue(s) to consider:
- [Medium] kdamond_merge_regions() uses a stale or 0 threshold (max_nr_accesses) when probe weights are set, preventing proper region merging. --
--- Patch [12]: [PATCH 12/19] mm/damon/core: set samples in apply_probes() if probe weights are set --- commit c57b42d6ad5d1b962d67f040aa171492d081c859
Author: SJ Park <[email protected]>
mm/damon/core: set samples in apply_probes() if probe weights are set
When probe weights are set, the prepare_access_checks() ops callback is not invoked, so sampling addresses of regions are unset. Ask apply_probes() to set those together in the case.
Quoted 5 lines
mm/damon/core.c +0
-0
mm/damon/core.c static int kdamond_fn(void *data) · line 3784
Quoted 9 lines
mm/damon/core.c +2
-1@@ -3777,7 +3777,8 @@ static int kdamond_fn(void *data)if (!access_check_disabled && ctx->ops.check_accesses) max_nr_accesses = ctx->ops.check_accesses (ctx);if (ctx->ops.apply_probes) - ctx->ops.apply_probes (ctx, false, false); + ctx->ops.apply_probes (ctx, access_check_disabled, + false);if (time_after_eq (ctx->passed_sample_intervals, next_aggregation_sis)) {
[Severity: Medium]
When access_check_disabled is true, ctx->ops.check_accesses() is skipped. Does this leave max_nr_accesses stale or set to 0 when it is subsequently passed to kdamond_merge_regions() shortly after this block?
If max_nr_accesses evaluates to 0, it seems this might defeat the 10 percent tolerance logic for region aggregation.
Could this force adjacent regions to merge only when their scores match exactly, leading to region fragmentation until the maximum region limit is hit?
Since damon_has_probe_weights() currently returns false unconditionally to safely stage the new feature, this appears to be unreachable today, but might become a regression once the feature is fully enabled.
Signature · 1 line
Sashiko AI review · https://sashiko.dev/#/patchset/[email protected]?part=12
SJ Park
maintainerRe: [PATCH 12/19] mm/damon/core: set samples in apply_probes() if probe weights are set
Quoted 37 lines · On Fri, 10 Jul 2026 14:02:54 +0000 [email protected] wrote:
Thank you for your contribution! Sashiko AI review found 1 potential issue(s) to consider:
- [Medium]kdamond_merge_regions()uses a stale or 0 threshold (max_nr_accesses) when probe weights are set, preventing proper region merging. ----- Patch [12]: [PATCH 12/19]
mm/damon/core: set samples inapply_probes()if probe weights are set --- commitc57b42d6ad5d1b962d67f040aa171492d081c859
Author: SJ Park <[email protected]>
mm/damon/core: set samples inapply_probes()if probe weights are setWhen probe weights are set, the
prepare_access_checks()ops callback is not invoked, so sampling addresses of regions are unset. Askapply_probes()to set those together in the case.Quoted 5 lines
mm/damon/core.c +0
-0mm/damon/core.c static int kdamond_fn(void *data) · line 3784
Quoted 9 lines
mm/damon/core.c +2
-1@@ -3777,7 +3777,8 @@ static int kdamond_fn(void *data)if (!access_check_disabled && ctx->ops.check_accesses) max_nr_accesses = ctx->ops.check_accesses (ctx);if (ctx->ops.apply_probes) - ctx->ops.apply_probes (ctx, false, false); + ctx->ops.apply_probes (ctx, access_check_disabled, + false);if (time_after_eq (ctx->passed_sample_intervals, next_aggregation_sis)) {[Severity: Medium]
Whenaccess_check_disabledis true,ctx->ops.check_accesses()is skipped. Does this leavemax_nr_accessesstale or set to 0 when it is subsequently passed tokdamond_merge_regions()shortly after this block?If
max_nr_accessesevaluates to 0, it seems this might defeat the 10 percent tolerance logic for region aggregation.
Quoted 7 lines
Could this force adjacent regions to merge only when their scores match exactly, leading to region fragmentation until the maximum region limit is hit?
Since
damon_has_probe_weights()currently returns false unconditionally to safely stage the new feature, this appears to be unreachable today, but might become a regression once the feature is fully enabled.
No issue. access_check_disabled is always false at this moment. A later patch in this series will avoid the issue before it can be true.
Quoted 3 lines
Signature · 2 lines
-- Sashiko AI review · https://sashiko.dev/#/patchset/[email protected]?part=12
Thanks,
SJ
SJ Park
maintainerPATCH 13/19 mm/damon/core: s/max_nr_accesses/max_merge_score/ in kdamond_fn()
In reply to SJ ParkWhen probe weights are set, DAMON merge logic works with the probe hits weighted sum. The core logic is setting the merge threshold based on the access frequency, though. Before using probe hits based threshold, rename the variables to look more general.
--- mm/damon/core.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-)
mm/damon/core.c +3 -3
@@ -3730,7 +3730,6 @@ static void kdamond_init_ctx(struct damon_ctx *ctx)static int kdamond_fn (void *data) {struct damon_ctx *ctx = data; -unsigned int max_nr_accesses =0 ;unsigned long sz_limit =0 ;pr_debug ("kdamond (%d) starts\n" , current->pid);
@@ -3764,6 +3763,7 @@ static int kdamond_fn(void *data)unsigned long next_ops_update_sis = ctx->next_ops_update_sis;unsigned long sample_interval = ctx->attrs.sample_interval;bool access_check_disabled =damon_has_probe_weights (ctx); +unsigned int max_merge_score =0 ;if (kdamond_wait_activation (ctx))break ;
@@ -3775,7 +3775,7 @@ static int kdamond_fn(void *data) ctx->passed_sample_intervals++;if (!access_check_disabled && ctx->ops.check_accesses) - max_nr_accesses = ctx->ops.check_accesses (ctx); + max_merge_score = ctx->ops.check_accesses (ctx);if (ctx->ops.apply_probes) ctx->ops.apply_probes (ctx, access_check_disabled, false);
@@ -3783,7 +3783,7 @@ static int kdamond_fn(void *data)if (time_after_eq (ctx->passed_sample_intervals, next_aggregation_sis)) {kdamond_merge_regions (ctx, - max_nr_accesses /10 , + max_merge_score /10 , sz_limit);/* online updates might be made */ sz_limit =damon_apply_min_nr_regions (ctx);
Signature · 1 line
2.47.3
SJ Park
maintainerPATCH 14/19 mm/damon/core: get merge threshold from probe hits when weights are set
In reply to SJ ParkWhen probe weights are set, DAMON merges regions based on their probe hits weighted sum. But the merge threshold is calculated based on the access frequency. Update it to retrieve the maximum probe hits weighted sum in the snapshot from apply_probes() ops callback, and generate the threshold based on it.
--- mm/damon/core.c | 18 ++++++++++++++---- 1 file changed, 14 insertions(+), 4 deletions(-)
mm/damon/core.c +14 -4
@@ -3763,7 +3763,8 @@ static int kdamond_fn(void *data)unsigned long next_ops_update_sis = ctx->next_ops_update_sis;unsigned long sample_interval = ctx->attrs.sample_interval;bool access_check_disabled =damon_has_probe_weights (ctx); -unsigned int max_merge_score =0 ; +unsigned int max_merge_score =0 , max_wsum; +bool get_max_wsum;if (kdamond_wait_activation (ctx))break ;
@@ -3776,9 +3777,18 @@ static int kdamond_fn(void *data)if (!access_check_disabled && ctx->ops.check_accesses) max_merge_score = ctx->ops.check_accesses (ctx); -if (ctx->ops.apply_probes) - ctx->ops.apply_probes (ctx, access_check_disabled, - false); +if (ctx->ops.apply_probes) { +if (time_after_eq (ctx->passed_sample_intervals, + next_aggregation_sis) && + access_check_disabled) + get_max_wsum = true; +else + get_max_wsum = false; + max_wsum = ctx->ops.apply_probes (ctx, + access_check_disabled, get_max_wsum); +if (get_max_wsum) + max_merge_score = max_wsum; + }if (time_after_eq (ctx->passed_sample_intervals, next_aggregation_sis)) {
Signature · 1 line
2.47.3
[email protected]
AI reviewRe: [PATCH 14/19] mm/damon/core: get merge threshold from probe hits when weights are set
Thank you for your contribution! Sashiko AI review found 2 potential issue(s) to consider: - [Medium] Silent monitoring failure when probe weights are set on operations lacking apply_probes.…
Thank you for your contribution! Sashiko AI review found 2 potential issue(s) to consider:
- [Medium] Silent monitoring failure when probe weights are set on operations lacking apply_probes.
- [Medium] kdamond_merge_regions loop termination condition still uses unweighted access frequency as max_thres. --
--- Patch [14]: [PATCH 14/19] mm/damon/core: get merge threshold from probe hits when weights are set --- commit 0b09a73e4b353610f5bc3d4f305131a2f9d7fea8
Author: SJ Park <[email protected]>
mm/damon/core: get merge threshold from probe hits when weights are set
When probe weights are set, DAMON merges regions based on their probe hits weighted sum. But the merge threshold is calculated based on the access frequency. Update it to retrieve the maximum probe hits weighted sum in the snapshot from apply_probes() ops callback, and generate the threshold based on it.
mm/damon/core.c static int kdamond_fn(void *data) · line 3780
Quoted 12 lines
mm/damon/core.c +1
-3@@ -3776,9 +3777,18 @@ static int kdamond_fn(void *data)if (!access_check_disabled && ctx->ops.check_accesses) max_merge_score = ctx->ops.check_accesses (ctx); -if (ctx->ops.apply_probes) - ctx->ops.apply_probes (ctx, access_check_disabled, - false); +if (ctx->ops.apply_probes) {
[Severity: Medium]
If a user configures a DAMON context with ops that lack apply_probes (such as vaddr), adds a probe with a weight, and starts monitoring, could this result in a silent monitoring failure?
Since damon_valid_probe_params() allows this configuration:
mm/damon/core.c:damon_valid_probe_params() {
...
return true; }
access_check_disabled will be true, causing check_accesses() to be skipped. With ctx->ops.apply_probes being NULL, no monitoring data would be collected and max_merge_score would remain 0.
Quoted 4 lines
mm/damon/core.c +4
-0+if (time_after_eq (ctx->passed_sample_intervals, + next_aggregation_sis) && + access_check_disabled) + get_max_wsum = true;
mm/damon/core.c static int kdamond_fn(void *data) · line 3794
Quoted 10 lines
mm/damon/core.c +7
-0+else + get_max_wsum = false; + max_wsum = ctx->ops.apply_probes (ctx, + access_check_disabled, get_max_wsum); +if (get_max_wsum) + max_merge_score = max_wsum; + }if (time_after_eq (ctx->passed_sample_intervals, next_aggregation_sis)) {
[Severity: Medium]
When kdamond_merge_regions() is called with this new max_merge_score based on weighted probe hits, could the fallback loop terminate prematurely?
mm/damon/core.c:kdamond_fn() {
...
kdamond_merge_regions(ctx, max_merge_score / 10, sz_limit);
...
}
Looking at kdamond_merge_regions(), max_thres is hardcoded to the unweighted maximum access frequency:
mm/damon/core.c:kdamond_merge_regions() {
max_thres = c->attrs.aggr_interval /
(c->attrs.sample_interval ? c->attrs.sample_interval : 1);
do {
...
} while (nr_regions > c->attrs.max_nr_regions &&
threshold / 2 < max_thres);
}If a user sets a probe weight such that max_merge_score / 10 > max_thres * 2, the loop condition threshold / 2 < max_thres will evaluate to false immediately, failing to enforce the max_nr_regions limit during region merging.
Signature · 1 line
Sashiko AI review · https://sashiko.dev/#/patchset/[email protected]?part=14
SJ Park
maintainerRe: [PATCH 14/19] mm/damon/core: get merge threshold from probe hits when weights are set
Quoted 37 lines · On Fri, 10 Jul 2026 14:05:10 +0000 [email protected] wrote:
Thank you for your contribution! Sashiko AI review found 2 potential issue(s) to consider:
- [Medium] Silent monitoring failure when probe weights are set on operations lackingapply_probes.
- [Medium]kdamond_merge_regionsloop termination condition still uses unweighted access frequency asmax_thres. ----- Patch [14]: [PATCH 14/19]
mm/damon/core: get merge threshold from probe hits when weights are set --- commit0b09a73e4b353610f5bc3d4f305131a2f9d7fea8
Author: SJ Park <[email protected]>
mm/damon/core: get merge threshold from probe hits when weights are setWhen probe weights are set, DAMON merges regions based on their probe hits weighted sum. But the merge threshold is calculated based on the access frequency. Update it to retrieve the maximum probe hits weighted sum in the snapshot from
apply_probes()ops callback, and generate the threshold based on it.mm/damon/core.c static int kdamond_fn(void *data) · line 3780
Quoted 12 lines
mm/damon/core.c +1
-3@@ -3776,9 +3777,18 @@ static int kdamond_fn(void *data)if (!access_check_disabled && ctx->ops.check_accesses) max_merge_score = ctx->ops.check_accesses (ctx); -if (ctx->ops.apply_probes) - ctx->ops.apply_probes (ctx, access_check_disabled, - false); +if (ctx->ops.apply_probes) {[Severity: Medium]
If a user configures a DAMON context with ops that lackapply_probes(such as vaddr), adds a probe with a weight, and starts monitoring, could this result in a silent monitoring failure?Since
damon_valid_probe_params()allows this configuration:
Quoted 8 lines
mm/damon/core.c:damon_valid_probe_params() {
...return true; }
access_check_disabledwill be true, causingcheck_accesses()to be skipped. Withctx->ops.apply_probesbeing NULL, no monitoring data would be collected andmax_merge_scorewould remain 0.
Intentional behavior. No issue.
Quoted 40 lines
Quoted 5 lines
mm/damon/core.c +4
-0+if (time_after_eq (ctx->passed_sample_intervals, + next_aggregation_sis) && + access_check_disabled) + get_max_wsum = true;mm/damon/core.c static int kdamond_fn(void *data) · line 3794
Quoted 10 lines
mm/damon/core.c +7
-0+else + get_max_wsum = false; + max_wsum = ctx->ops.apply_probes (ctx, + access_check_disabled, get_max_wsum); +if (get_max_wsum) + max_merge_score = max_wsum; + }if (time_after_eq (ctx->passed_sample_intervals, next_aggregation_sis)) {[Severity: Medium]
Whenkdamond_merge_regions()is called with this newmax_merge_scorebased on weighted probe hits, could the fallback loop terminate prematurely?mm/damon/core.c:kdamond_fn() {
...kdamond_merge_regions(ctx, max_merge_score / 10, sz_limit);...
}Looking at
kdamond_merge_regions(),max_thresis hardcoded to the unweighted maximum access frequency:mm/damon/core.c:kdamond_merge_regions() { max_thres = c->attrs.aggr_interval / (c->attrs.sample_interval ? c->attrs.sample_interval : 1); do { ... } while (nr_regions > c->attrs.max_nr_regions && threshold / 2 < max_thres); }
Quoted 3 lines
If a user sets a probe weight such that
max_merge_score/ 10 >max_thres* 2, the loop condition threshold / 2 <max_threswill evaluate to false immediately, failing to enforce themax_nr_regionslimit during region merging.
Known issue. I'm separately working on it.
Quoted 3 lines
Signature · 2 lines
-- Sashiko AI review · https://sashiko.dev/#/patchset/[email protected]?part=14
Thanks,
SJ
SJ Park
maintainerPATCH 15/19 mm/damon/core: implement damon_has_probe_weight()
In reply to SJ ParkDAMON monitors only data attributes when probe weights are set. However, the function for detecting it is intentionally returning false always. The intention was to make changes for complete support of the mode in a safe and incremental way. Now all the building blocks are made. Complete the mode detection function so that the mode can really start working.
--- mm/damon/core.c | 6 ++++++ 1 file changed, 6 insertions(+)
mm/damon/core.c +6 -0
@@ -211,6 +211,12 @@ static struct damon_probe *damon_nth_probe(int n, struct damon_ctx *ctx)static bool damon_has_probe_weights (struct damon_ctx *c) { +struct damon_probe *p; + +damon_for_each_probe (p, c) { +if (p->weight) +return true; + }return false; }
Signature · 1 line
2.47.3
[email protected]
AI reviewRe: [PATCH 15/19] mm/damon/core: implement damon_has_probe_weight()
Thank you for your contribution! Sashiko AI review found 1 potential issue(s) to consider: - [High] Setting probe weights unconditionally disables access checks without validating if the active…
Thank you for your contribution! Sashiko AI review found 1 potential issue(s) to consider:
- [High] Setting probe weights unconditionally disables access checks without validating if the active operation set supports data attribute probes (apply_probes), silently breaking monitoring. --
--- Patch [15]: [PATCH 15/19] mm/damon/core: implement damon_has_probe_weight() --- commit 7b3dfd9b2d27b35cdf18598b48bc4927675cb47a
Author: SJ Park <[email protected]>
mm/damon/core: implement damon_has_probe_weight()
This commit updates damon_has_probe_weights() to properly iterate over the probes and return true if any probe has a weight configured. This enables the data attribute monitoring mode that previously returned false intentionally during incremental development.
Quoted 5 lines
mm/damon/core.c +0
-0
mm/damon/core.c static struct damon_probe *damon_nth_probe(int n, struct damon_ctx *ctx) · line 219
Quoted 9 lines
mm/damon/core.c +6
-0@@ -211,6 +211,12 @@ static struct damon_probe *damon_nth_probe(int n, struct damon_ctx *ctx)static bool damon_has_probe_weights (struct damon_ctx *c) { +struct damon_probe *p; + +damon_for_each_probe (p, c) { +if (p->weight) +return true; + }
[Severity: High]
If a user configures a DAMON context with an operation set that does not implement apply_probes (e.g. vaddr operations) and adds a probe with a non-zero weight, will this silently break monitoring?
With this change, damon_has_probe_weights() returning true will skip standard access monitoring in kdamond_fn():
mm/damon/core.c:kdamond_fn() {
...
bool access_check_disabled = damon_has_probe_weights(ctx);
unsigned int max_merge_score = 0;
...
if (!access_check_disabled && ctx->ops.check_accesses)
max_merge_score = ctx->ops.check_accesses(ctx);
if (ctx->ops.apply_probes) {
/* bypassed if apply_probes is not implemented */
...
}
...
/* max_merge_score remains 0 */
if (time_after_eq(ctx->passed_sample_intervals,
next_aggregation_sis)) {
kdamond_merge_regions(ctx, max_merge_score / 10, sz_limit);...
}
Should damon_valid_probe_params() or damon_has_probe_weights() also verify that ctx->ops.apply_probes is implemented before allowing this mode, to prevent kdamond_merge_regions() from unconditionally merging regions with a threshold of 0?
Quoted 2 lines
mm/damon/core.c +0
-0return false; }
Signature · 1 line
Sashiko AI review · https://sashiko.dev/#/patchset/[email protected]?part=15
SJ Park
maintainerRe: [PATCH 15/19] mm/damon/core: implement damon_has_probe_weight()
Quoted 55 lines · On Fri, 10 Jul 2026 14:11:00 +0000 [email protected] wrote:
Thank you for your contribution! Sashiko AI review found 1 potential issue(s) to consider:
- [High] Setting probe weights unconditionally disables access checks without validating if the active operation set supports data attribute probes (apply_probes), silently breaking monitoring. ----- Patch [15]: [PATCH 15/19]
mm/damon/core: implementdamon_has_probe_weight()--- commit7b3dfd9b2d27b35cdf18598b48bc4927675cb47a
Author: SJ Park <[email protected]>
mm/damon/core: implementdamon_has_probe_weight()This commit updates
damon_has_probe_weights()to properly iterate over the probes and return true if any probe has a weight configured. This enables the data attribute monitoring mode that previously returned false intentionally during incremental development.Quoted 5 lines
mm/damon/core.c +0
-0mm/damon/core.c static struct damon_probe *damon_nth_probe(int n, struct damon_ctx *ctx) · line 219
Quoted 9 lines
mm/damon/core.c +6
-0@@ -211,6 +211,12 @@ static struct damon_probe *damon_nth_probe(int n, struct damon_ctx *ctx)static bool damon_has_probe_weights (struct damon_ctx *c) { +struct damon_probe *p; + +damon_for_each_probe (p, c) { +if (p->weight) +return true; + }[Severity: High]
If a user configures a DAMON context with an operation set that does not implementapply_probes(e.g. vaddr operations) and adds a probe with a non-zero weight, will this silently break monitoring?With this change,
damon_has_probe_weights()returning true will skip standard access monitoring inkdamond_fn():mm/damon/core.c:kdamond_fn() {
...bool access_check_disabled = damon_has_probe_weights(ctx); unsigned int max_merge_score = 0; ... if (!access_check_disabled && ctx->ops.check_accesses) max_merge_score = ctx->ops.check_accesses(ctx); if (ctx->ops.apply_probes) { /* bypassed if apply_probes is not implemented */ ... } ... /* max_merge_score remains 0 */ if (time_after_eq(ctx->passed_sample_intervals, next_aggregation_sis)) { kdamond_merge_regions(ctx, max_merge_score / 10, sz_limit);
Quoted 7 lines
...
}Should
damon_valid_probe_params()ordamon_has_probe_weights()also verify thatctx->ops.apply_probesis implemented before allowing this mode, to preventkdamond_merge_regions()from unconditionally merging regions with a threshold of 0?
No issue. This is an intentional behavior.
Quoted 6 lines
Quoted 3 lines
mm/damon/core.c +0
-0return false; }Signature · 1 line
Sashiko AI review · https://sashiko.dev/#/patchset/[email protected]?part=15
Thanks,
SJ
SJ Park
maintainerPATCH 16/19 mm/damon/sysfs: implement probe/weight file
In reply to SJ ParkImplement a new sysfs file, 'weight', under probe directory. Users will be able to set the probe weight and enable the attributes only monitoring using it.
--- mm/damon/sysfs.c | 25 +++++++++++++++++++++++++ 1 file changed, 25 insertions(+)
mm/damon/sysfs.c +25 -0
@@ -1065,6 +1065,7 @@ static const struct kobj_type damon_sysfs_filters_ktype = {struct damon_sysfs_probe {struct kobject kobj; +unsigned int weight;struct damon_sysfs_filters *filters; };
@@ -1100,12 +1101,35 @@ static void damon_sysfs_probe_rm_dirs(struct damon_sysfs_probe *probe) } } +static ssize_t weight_show (struct kobject *kobj,struct kobj_attribute *attr, +char *buf) +{ +struct damon_sysfs_probe *probe =container_of (kobj, + struct damon_sysfs_probe, kobj); + +return sysfs_emit (buf,"%u\n" , probe->weight); +} + +static ssize_t weight_store (struct kobject *kobj, +struct kobj_attribute *attr,const char *buf,size_t count) +{ +struct damon_sysfs_probe *probe =container_of (kobj, + struct damon_sysfs_probe, kobj); +int err =kstrtouint (buf,0 , &probe->weight); + +return err ? err : count; +} +static void damon_sysfs_probe_release (struct kobject *kobj) {kfree (container_of(kobj ,struct damon_sysfs_probe ,kobj )); } +static struct kobj_attribute damon_sysfs_probe_weight_attr = +__ATTR_RW_MODE (weight,0600 ); +static struct attribute *damon_sysfs_probe_attrs[] = { + &damon_sysfs_probe_weight_attr.attr,NULL , };ATTRIBUTE_GROUPS (damon_sysfs_probe);
@@ -1965,6 +1989,7 @@ static int damon_sysfs_set_probes(struct damon_ctx *ctx,return -ENOMEM ;damon_add_probe (ctx, p); sys_probe = sys_probes->probes_arr[i]; + p->weight = sys_probe->weight; err =damon_sysfs_set_probe (p, sys_probe);if (err)return err;
Signature · 1 line
2.47.3
SJ Park
maintainerPATCH 17/19 Docs/mm/damon/design: document attrs-only monitoring
In reply to SJ ParkUpdate DAMON design document for the attributes only monitoring mode.
--- Documentation/mm/damon/design.rst | 20 ++++++++++++++++++++ 1 file changed, 20 insertions(+)
Documentation/mm/damon/design.rst +20 -0
@@ -316,6 +316,26 @@ Another way to do this for higher accuracy is using :ref:`DAMOS filter information in page level. But, because it is operated in page level, the overhead is proportional to the size of the memory. +Data Attributes-only Monitoring +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +Data access is the primary monitoring information for DAMON. Hence it +:ref:`adjusts <damon_design_data_attrs_monitoring>` regions using the access +:ref:`counter <damon_design_region_based_sampling>` (``nr_accesses``). In some +use cases, however, users may want some of :ref:`attributes +<damon_design_data_attrs_monitoring>` to be the primary information. + +Data attributes-only monitoring mode supports this use case. For the mode, +each attribute probe has their priority weight value. Users can describe by +what combination of the attributes the primary information is decided, by +setting the priority weight value. If the total sum of the weights is not +zero, the mode is enabled. The regions adjustment mechanism uses the weighted +sum of the :ref:`probe hit counts <damon_design_data_attrs_monitoring>` instead +of ``nr_accesses`` in the case. When the mode is enabled, access monitoring is +automatically turned off. The access counter (``nr_accesses``) will always be +zero and not updated. Hence the mode is called Data Attributes "only" +monitoring. + Dynamic Target Space Updates Handling ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Signature · 1 line
2.47.3
SJ Park
maintainerPATCH 18/19 Docs/admin-guide/mm/damon/usage: document weight sysfs file
In reply to SJ ParkUpdate DAMON usage document for newly added probe weight file.
--- Documentation/admin-guide/mm/damon/usage.rst | 11 ++++++++--- Documentation/mm/damon/design.rst | 5 +++++ 2 files changed, 13 insertions(+), 3 deletions(-)
Documentation/admin-guide/mm/damon/usage.rst +8 -3
@@ -73,9 +73,10 @@ comma (","). │ │ │ │ │ │ │ intervals_goal/access_bp,aggrs,min_sample_us,max_sample_us │ │ │ │ │ │ nr_regions/min,max │ │ │ │ │ │ :ref:`probes <damon_usage_sysfs_probes>`/nr_probes - │ │ │ │ │ │ │ 0/filters/nr_filters - │ │ │ │ │ │ │ │ 0/type,matching,allow,path - │ │ │ │ │ │ │ │ ... + │ │ │ │ │ │ │ 0/weight + │ │ │ │ │ │ │ │ filters/nr_filters + │ │ │ │ │ │ │ │ │ 0/type,matching,allow,path + │ │ │ │ │ │ │ │ │ ... │ │ │ │ │ │ │ ... │ │ │ │ │ :ref:`targets <sysfs_targets>`/nr_targets │ │ │ │ │ │ :ref:`0 <sysfs_target>`/pid_target,obsolete_target
@@ -286,6 +287,10 @@ In each probe directory, one directory, ``filters`` exists. The directory contains files for installing filters for the probe, that is used to determine the data attribute for the probe. +Each probe directory also contains ``weight`` file. Reading from and writing +to the file gets and sets the :ref:`attributes-only monitoring +<damon_design_attrs_only_monitoring>` weight for the attribute of the probe. + In the beginning, ``filters`` directory has only one file, ``nr_filters``. Writing a number (``N``) to the file creates the number of child directories named ``0`` to ``N-1``. Each directory represents each filter and works in a
Documentation/mm/damon/design.rst +5 -0
@@ -316,6 +316,8 @@ Another way to do this for higher accuracy is using :ref:`DAMOS filter information in page level. But, because it is operated in page level, the overhead is proportional to the size of the memory. +.. _damon_design_attrs_only_monitoring: + Data Attributes-only Monitoring ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
@@ -336,6 +338,9 @@ automatically turned off. The access counter (``nr_accesses``) will always be zero and not updated. Hence the mode is called Data Attributes "only" monitoring. +Refer to the :ref:`admin guide <damon_usage_sysfs_probes>` to know how users +can use the mode. + Dynamic Target Space Updates Handling ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Signature · 1 line
2.47.3
SJ Park
maintainerPATCH 19/19 Docs/ABI/damon: document probe weight file
In reply to SJ ParkUpdate DAMON ABI document for the newly added probe weight sysfs file.
--- Documentation/ABI/testing/sysfs-kernel-mm-damon | 6 ++++++ 1 file changed, 6 insertions(+)
Documentation/ABI/testing/sysfs-kernel-mm-damon +6 -0
@@ -164,6 +164,12 @@ Description: Writing a number 'N' to this file creates the number of directories for each DAMON probe named '0' to 'N-1' under the probes/ directory. +What: /sys/kernel/mm/damon/admin/kdamonds/<K>/contexts/<C>/monitoring_attrs/probes/<P>/weight +Date: Jul 2026 +Contact: SJ Park <[email protected]> +Description: Writing to and reading from this file sets and gets the + per-probe attribute weight. + What: /sys/kernel/mm/damon/admin/kdamonds/<K>/contexts/<C>/monitoring_attrs/probes/<P>/filters/nr_filters Date: May 2026 Contact: SJ Park <[email protected]>
Signature · 1 line
2.47.3
SJ Park
maintainerQuoted 2 lines · On Fri, 10 Jul 2026 06:46:29 -0700 SJ Park <[email protected]> wrote:
TL;DR: Introduce a way to get DAMON's best effort accuracy monitoring of user-demanding non-access data attributes.
Sashiko found no blocker for this series. Sashiko sent findings to damon@ mailing list [1], and I replied to all the comments. Please read those for details.
[1] https://lore.kernel.org/damon/
Thanks,
SJ
[...]