HID: wacom: validate report length before Intuos Pro2 BT pen parse
Subsystems (3)
PATCH 1/1 HID: wacom: validate report length before Intuos Pro2 BT pen parse
wacom_intuos_pro2_bt_irq() receives the wire report length in len but never consults it before calling wacom_intuos_pro2_bt_pen(). The only admission check on this path is the report-id byte:
if (data[0] != 0x80 && data[0] != 0x81) {
...
return 0;
}
wacom_intuos_pro2_bt_pen(wacom);wacom_intuos_pro2_bt_pen() itself does not even receive len (it takes only struct wacom_wac *wacom), so it cannot bound its own reads. For INTUOSP2_BT / INTUOSP2S_BT devices it unconditionally does:
wacom->serial[0] = get_unaligned_le64(&data[99]); wacom->id[0] = get_unaligned_le16(&data[107]);
i.e. it reads up to offset 108 regardless of how many bytes the peripheral actually sent. features.type is selected from the VID/PID id_table entry (BT_DEVICE_WACOM(0x361) -> INTUOSP2_BT) and wacom_setup_device_quirks() force-registers the pen/pad/touch inputs for that type independent of the report descriptor, so a malicious or malfunctioning paired/spoofed Bluetooth peripheral can advertise that VID/PID and send an undersized report (e.g. 10 bytes) that still satisfies the data[0] == 0x80/0x81 gate. The driver then reads past the received report and forwards the bytes to userspace via evdev (MSC_SERIAL / ABS_MISC on the pen input node), an out-of-bounds read with a concrete userspace read-back channel, and a true out-of-bounds read on transports where the backing buffer is sized to the (small) report descriptor rather than a fixed-size staging buffer.
The non-Pro2 branch of the same function (INTUOSHT3_BT, reading &data[33]/&data[41]) has the identical defect at a smaller offset.
This is the same class of bug commit 2f1763f62909 ("HID: wacom: fix out-of-bounds read in wacom_intuos_bt_irq") already hardened in the sibling function wacom_intuos_bt_irq(), which added explicit short-report guards before parsing:
case 0x04:
if (len < 32) {
dev_warn(..., "Report 0x04 too short: %zu bytes\n", len);
break;
}
wacom_intuos_bt_process_data(wacom, data + i);
...
case 0x03:
if (i == 1 && len < 22) {
dev_warn(..., "Report 0x03 too short: %zu bytes\n", len);
break;
}wacom_intuos_pro2_bt_irq() never received the analogous guard.
Fix it the same way: before calling wacom_intuos_pro2_bt_pen(), check len against the minimum size each branch of that function actually dereferences (109 bytes for INTUOSP2_BT/INTUOSP2S_BT, whose furthest read is &data[107] as a le16 -> byte index 108; 43 bytes for the INTUOSHT3_BT ("gen3") branch, whose furthest read is &data[41] as a le16 -> byte index 42). On a short report, warn and bail out before touching wacom->data past what was actually received, exactly as wacom_intuos_bt_irq() now does for its own report ids. Returning 0 here also skips the subsequent pro2 touch/pad/battery calls for the same malformed report, which is the safe, conservative behavior.
Runtime-verified on a v6.19 stand: injecting the truncated report via a spoofed 056a:0361 BT peripheral leaks bytes past the declared report length to the pen evdev node (MSC_SERIAL / ABS_MISC) before this fix, and the same input is rejected by the new length check with no leaked event afterward. KASAN itself stays quiet on the fixed-size uhid staging buffer used to inject the report (the over-read there lands in-object); on a descriptor-sized USB/BT buffer the identical read crosses the slab boundary and is a genuine KASAN-visible out-of-bounds read.
--- drivers/hid/wacom_wac.c | 13 +++++++++++++ 1 file changed, 13 insertions(+)
drivers/hid/wacom_wac.c +13 -0
@@ -1548,6 +1548,19 @@ static int wacom_intuos_pro2_bt_irq(struct wacom_wac *wacom, size_t len)return 0 ; } +if (wacom->features.type ==INTUOSP2_BT || + wacom->features.type ==INTUOSP2S_BT ) { +if (len <109 ) { +dev_warn (wacom->pen_input->dev.parent, +"Pro2 BT report too short: %zu bytes\n" , len); +return 0 ; + } + }else if (len <43 ) { +dev_warn (wacom->pen_input->dev.parent, +"Pro2 BT report too short: %zu bytes\n" , len); +return 0 ; + } +wacom_intuos_pro2_bt_pen (wacom);if (wacom->features.type ==INTUOSP2_BT || wacom->features.type ==INTUOSP2S_BT ) {
Signature · 1 line
2.50.1 (Apple Git-155)
[email protected]
AI reviewThank you for your contribution! Sashiko AI review found 1 potential issue(s) to consider:
Thank you for your contribution! Sashiko AI review found 1 potential issue(s) to consider:
Pre-existing issues:
- [High] The length checks introduced by the patch are insufficient. While they correctly bound the reads in wacom_intuos_pro2_bt_pen(), they fail to prevent out-of-bounds reads in the subsequent unconditional calls to the touch, pad, and battery parsing functions if the report length falls between the checked bounds and the maximum read offset. --
--- Patch [1]: [PATCH] HID: wacom: validate report length before Intuos Pro2 BT pen parse --- commit 1ba7672ecbf2a3b1f2ac28c705ac40735f4dcbcf
Author: Ibrahim Hashimov <[email protected]>
HID: wacom: validate report length before Intuos Pro2 BT pen parse
This commit adds length validation in wacom_intuos_pro2_bt_irq() to prevent out-of-bounds reads before parsing pen reports for Intuos Pro2 and Gen3 Bluetooth devices.
Quoted 14 lines
drivers/hid/wacom_wac.c +6
-0@@ -1548,6 +1548,19 @@ static int wacom_intuos_pro2_bt_irq(struct wacom_wac *wacom, size_t len)return 0 ; } +if (wacom->features.type ==INTUOSP2_BT || + wacom->features.type ==INTUOSP2S_BT ) { +if (len <109 ) { +dev_warn (wacom->pen_input->dev.parent, +"Pro2 BT report too short: %zu bytes\n" , len); +return 0 ;
drivers/hid/wacom_wac.c static int wacom_intuos_pro2_bt_irq(struct wacom_wac *wacom, size_t len) · line 1566
Quoted 10 lines
drivers/hid/wacom_wac.c +7
-0+ } + }else if (len <43 ) { +dev_warn (wacom->pen_input->dev.parent, +"Pro2 BT report too short: %zu bytes\n" , len); +return 0 ; + } +wacom_intuos_pro2_bt_pen (wacom);if (wacom->features.type ==INTUOSP2_BT || wacom->features.type ==INTUOSP2S_BT ) {
[Severity: High]
This is a pre-existing issue, but are these length checks sufficient to prevent out-of-bounds reads in the subsequent parsing functions?
While this successfully protects wacom_intuos_pro2_bt_pen(), the code goes on to unconditionally call other parsing functions:
drivers/hid/wacom_wac.c:wacom_intuos_pro2_bt_irq() {
...
wacom_intuos_pro2_bt_pen(wacom);
if (wacom->features.type == INTUOSP2_BT ||
wacom->features.type == INTUOSP2S_BT) {
wacom_intuos_pro2_bt_touch(wacom);
wacom_intuos_pro2_bt_pad(wacom);
...
}In wacom_intuos_pro2_bt_pad(), it reads up to offset 285:
drivers/hid/wacom_wac.c:wacom_intuos_pro2_bt_pad() {
...
int ring = data[285] & 0x7F;
bool ringstatus = data[285] & 0x80;
...
}And for Gen3 devices, after the len < 43 check, it calls wacom_intuos_gen3_bt_battery() which reads up to offset 45:
drivers/hid/wacom_wac.c:wacom_intuos_gen3_bt_battery() {
...
bool chg = data[45] & 0x80;
int battery_status = data[45] & 0x7F;
...
}If a spoofed device sends a report that passes the initial minimum bounds check (e.g., exactly 109 bytes for Pro2 or 43 bytes for Gen3), could this still result in out-of-bounds reads when parsing the pad, touch, or battery data?
Quoted 9 lines
drivers/hid/wacom_wac.c +0
-0wacom_intuos_pro2_bt_touch (wacom);wacom_intuos_pro2_bt_pad (wacom);wacom_intuos_pro2_bt_battery (wacom); }else {wacom_intuos_gen3_bt_pad (wacom);wacom_intuos_gen3_bt_battery (wacom); }return 0 ; }
Signature · 1 line
Sashiko AI review · https://sashiko.dev/#/patchset/[email protected]?part=1
PATCH v2 1/1 HID: wacom: validate report length in wacom_intuos_pro2_bt_irq
In reply to Ibrahim Hashimovwacom_intuos_pro2_bt_irq() receives the wire report length in len but never consults it before parsing. After the report-id gate it unconditionally calls wacom_intuos_pro2_bt_pen() and then, selected by features.type, a fixed chain of sub-parsers, none of which receive len:
wacom_intuos_pro2_bt_pen(wacom);
if (type == INTUOSP2_BT || type == INTUOSP2S_BT) {
wacom_intuos_pro2_bt_touch(wacom);
wacom_intuos_pro2_bt_pad(wacom);
wacom_intuos_pro2_bt_battery(wacom);
} else {
wacom_intuos_gen3_bt_pad(wacom);
wacom_intuos_gen3_bt_battery(wacom);
}Each sub-parser dereferences wacom->data at fixed offsets. The furthest byte touched on each branch is:
INTUOSP2_BT / INTUOSP2S_BT: wacom_intuos_pro2_bt_pad() reads data[285]
(the touchring byte), so the report must be at least 286 bytes;
INTUOSHT3_BT ("gen3"): wacom_intuos_gen3_bt_battery() reads data[45],
so the report must be at least 46 bytes.
features.type is selected from the VID/PID id_table entry and wacom_setup_device_quirks() force-registers the pen/pad/touch inputs for that type independent of the report descriptor, so a malicious or malfunctioning paired/spoofed Bluetooth peripheral can advertise that VID/PID and send an undersized report that still satisfies the data[0] == 0x80/0x81 gate. The driver then reads past the received report and forwards the bytes to userspace via evdev (MSC_SERIAL / ABS_MISC / ABS_WHEEL on the pen and pad input nodes), an out-of-bounds read with a concrete userspace read-back channel, and a true out-of-bounds read on transports whose backing buffer is sized to the (small) report descriptor rather than a fixed-size staging buffer.
This is the same class of bug commit 2f1763f62909 ("HID: wacom: fix out-of-bounds read in wacom_intuos_bt_irq") already hardened in the sibling wacom_intuos_bt_irq(), which guards each report id against its minimum length before parsing.
Guard wacom_intuos_pro2_bt_irq() the same way: before parsing, reject reports shorter than the furthest offset the selected branch actually dereferences, warn, and bail out. Because the whole pen/touch/pad/ battery chain runs unconditionally per branch, a single up-front check against the maximum offset (286 bytes for INTUOSP2_BT/INTUOSP2S_BT, 46 bytes for the gen3 branch) bounds every sub-parser. Returning 0 on a short report also skips those calls for the same malformed report, which is the safe, conservative behavior.
---
v2: the v1 check (len < 109 / len < 43) only bounded
wacom_intuos_pro2_bt_pen(). As sashiko-bot pointed out, the unconditional touch/pad/battery calls read much further -- wacom_intuos_pro2_bt_pad() up to data[285] and wacom_intuos_gen3_bt_battery() up to data[45] -- so a report in the gap (109..285 / 43..45) passed the guard yet still over-read. Raise the minimums to the furthest offset each branch dereferences (286 / 46) so the guard actually bounds the whole call chain.
drivers/hid/wacom_wac.c | 13 +++++++++++++ 1 file changed, 13 insertions(+)
drivers/hid/wacom_wac.c +13 -0
@@ -1548,6 +1548,19 @@ static int wacom_intuos_pro2_bt_irq(struct wacom_wac *wacom, size_t len)return 0 ; } +if (wacom->features.type ==INTUOSP2_BT || + wacom->features.type ==INTUOSP2S_BT ) { +if (len <286 ) { +dev_warn (wacom->pen_input->dev.parent, +"Pro2 BT report too short: %zu bytes\n" , len); +return 0 ; + } + }else if (len <46 ) { +dev_warn (wacom->pen_input->dev.parent, +"Pro2 BT report too short: %zu bytes\n" , len); +return 0 ; + } +wacom_intuos_pro2_bt_pen (wacom);if (wacom->features.type ==INTUOSP2_BT || wacom->features.type ==INTUOSP2S_BT ) {
Signature · 1 line
2.50.1 (Apple Git-155)
[email protected]
AI reviewRe: [PATCH v2] HID: wacom: validate report length in wacom_intuos_pro2_bt_irq
Thank you for your contribution! Sashiko AI review found 1 potential issue(s) to consider: - [Medium] The newly added length validation uses `dev_warn()` without ratelimiting, allowing a malicious…
Thank you for your contribution! Sashiko AI review found 1 potential issue(s) to consider:
- [Medium] The newly added length validation uses dev_warn() without ratelimiting, allowing a malicious device to spam the kernel log. --
--- Patch [1]: [PATCH v2] HID: wacom: validate report length in wacom_intuos_pro2_bt_irq --- commit d2626ddb2110b90160eb60887108918a58cb9412
Author: Ibrahim Hashimov <[email protected]>
HID: wacom: validate report length in wacom_intuos_pro2_bt_irq
This commit adds length validation to wacom_intuos_pro2_bt_irq to prevent out-of-bounds reads when parsing Bluetooth reports. It drops undersized reports and logs a warning before returning.
drivers/hid/wacom_wac.c static int wacom_intuos_pro2_bt_irq(struct wacom_wac *wacom, size_t len) · line 1555
Quoted 13 lines
drivers/hid/wacom_wac.c +5
-0@@ -1548,6 +1548,19 @@ static int wacom_intuos_pro2_bt_irq(struct wacom_wac *wacom, size_t len)return 0 ; } +if (wacom->features.type ==INTUOSP2_BT || + wacom->features.type ==INTUOSP2S_BT ) { +if (len <286 ) { +dev_warn (wacom->pen_input->dev.parent, +"Pro2 BT report too short: %zu bytes\n" , len);
[Severity: Medium]
Since this error path is triggered by external Bluetooth input, can a malicious or malfunctioning device flood the kernel logs by sending many undersized reports in rapid succession?
Would it be better to use dev_warn_ratelimited() here to prevent potential log spam and CPU/IO overhead?
drivers/hid/wacom_wac.c static int wacom_intuos_pro2_bt_irq(struct wacom_wac *wacom, size_t len) · line 1560
Quoted 5 lines
drivers/hid/wacom_wac.c +5
-0+return 0 ; + } + }else if (len <46 ) { +dev_warn (wacom->pen_input->dev.parent, +"Pro2 BT report too short: %zu bytes\n" , len);
[Severity: Medium]
Similarly, could this branch also benefit from dev_warn_ratelimited() to protect against log flooding from undersized reports?
Quoted 6 lines
drivers/hid/wacom_wac.c +3
-0+return 0 ; + } +wacom_intuos_pro2_bt_pen (wacom);if (wacom->features.type ==INTUOSP2_BT || wacom->features.type ==INTUOSP2S_BT ) {
Signature · 1 line
Sashiko AI review · https://sashiko.dev/#/patchset/[email protected]?part=1
Jiri Kosina
maintainerRe: [PATCH v2] HID: wacom: validate report length in wacom_intuos_pro2_bt_irq
In reply to Ibrahim HashimovPing, Jason, could you please Ack this one? Looks good to me, but I always prefer to have an Ack from one of you on the Wacom HID driver.
Thanks,
Signature · 2 lines
Jiri Kosina SUSE Labs
Quoted 94 lines · Ibrahim Hashimov
wacom_intuos_pro2_bt_irq()receives the wire report length inlenbut never consults it before parsing. After the report-id gate it unconditionally callswacom_intuos_pro2_bt_pen()and then, selected by features.type, a fixed chain of sub-parsers, none of which receivelen:wacom_intuos_pro2_bt_pen(wacom); if (type == INTUOSP2_BT || type == INTUOSP2S_BT) { wacom_intuos_pro2_bt_touch(wacom); wacom_intuos_pro2_bt_pad(wacom); wacom_intuos_pro2_bt_battery(wacom); } else { wacom_intuos_gen3_bt_pad(wacom); wacom_intuos_gen3_bt_battery(wacom); }Each sub-parser dereferences
wacom->dataat fixed offsets. The furthest byte touched on each branch is:
INTUOSP2_BT/INTUOSP2S_BT:wacom_intuos_pro2_bt_pad()reads data[285](the touchring byte), so the report must be at least 286 bytes;
INTUOSHT3_BT("gen3"):wacom_intuos_gen3_bt_battery()reads data[45],
so the report must be at least 46 bytes.features.type is selected from the VID/PID
id_tableentry andwacom_setup_device_quirks()force-registers the pen/pad/touch inputs for that type independent of the report descriptor, so a malicious or malfunctioning paired/spoofed Bluetooth peripheral can advertise that VID/PID and send an undersized report that still satisfies the data[0] == 0x80/0x81 gate. The driver then reads past the received report and forwards the bytes to userspace via evdev (MSC_SERIAL/ABS_MISC/ABS_WHEELon the pen and pad input nodes), an out-of-bounds read with a concrete userspace read-back channel, and a true out-of-bounds read on transports whose backing buffer is sized to the (small) report descriptor rather than a fixed-size staging buffer.This is the same class of bug commit
2f1763f62909("HID: wacom: fix out-of-bounds read inwacom_intuos_bt_irq") already hardened in the siblingwacom_intuos_bt_irq(), which guards each report id against its minimum length before parsing.Guard
wacom_intuos_pro2_bt_irq()the same way: before parsing, reject reports shorter than the furthest offset the selected branch actually dereferences, warn, and bail out. Because the whole pen/touch/pad/ battery chain runs unconditionally per branch, a single up-front check against the maximum offset (286 bytes for INTUOSP2_BT/INTUOSP2S_BT, 46 bytes for the gen3 branch) bounds every sub-parser. Returning 0 on a short report also skips those calls for the same malformed report, which is the safe, conservative behavior.Fixes 4922cd26f03c ("HID: wacom: Support 2nd-gen Intuos Pro's Bluetooth classic interface")Signed-off-by Ibrahim Hashimov <[email protected]>Assisted-by AuditCode-AI:2026.07---
v2: the v1 check (len < 109 / len < 43) only bounded
wacom_intuos_pro2_bt_pen(). As sashiko-bot pointed out, the unconditional touch/pad/battery calls read much further --wacom_intuos_pro2_bt_pad()up to data[285] andwacom_intuos_gen3_bt_battery()up to data[45] -- so a report in the gap (109..285 / 43..45) passed the guard yet still over-read. Raise the minimums to the furthest offset each branch dereferences (286 / 46) so the guard actually bounds the whole call chain.drivers/hid/wacom_wac.c | 13 +++++++++++++ 1 file changed, 13 insertions(+)drivers/hid/wacom_wac.c +13
-0@@ -1548,6 +1548,19 @@ static int wacom_intuos_pro2_bt_irq(struct wacom_wac *wacom, size_t len)return 0 ; } +if (wacom->features.type ==INTUOSP2_BT || + wacom->features.type ==INTUOSP2S_BT ) { +if (len <286 ) { +dev_warn (wacom->pen_input->dev.parent, +"Pro2 BT report too short: %zu bytes\n" , len); +return 0 ; + } + }else if (len <46 ) { +dev_warn (wacom->pen_input->dev.parent, +"Pro2 BT report too short: %zu bytes\n" , len); +return 0 ; + } +wacom_intuos_pro2_bt_pen (wacom);if (wacom->features.type ==INTUOSP2_BT || wacom->features.type ==INTUOSP2S_BT ) {Signature · 1 line
2.50.1 (Apple Git-155)
Jason Gerecke
Acked-byRe: [PATCH v2] HID: wacom: validate report length in wacom_intuos_pro2_bt_irq
Quoted 4 lines · Jiri Kosina
Ping, Jason, could you please Ack this one? Looks good to me, but I always prefer to have an Ack from one of you on the Wacom HID driver.
LGTM. I suspect there are plenty more similar cases that need cleaning, but this is a straightforward improvement.
Jason (she/they)
---
Now instead of four in the eights place /
you’ve got three, ‘Cause you added one /
(That is to say, eight) to the two, /
But you can’t take seven from three, /
So you look at the sixty-fours....
Quoted 103 lines
Thanks,
--
Jiri Kosina
SUSE LabsQuoted 94 lines · Ibrahim Hashimov
wacom_intuos_pro2_bt_irq()receives the wire report length inlenbut never consults it before parsing. After the report-id gate it unconditionally callswacom_intuos_pro2_bt_pen()and then, selected by features.type, a fixed chain of sub-parsers, none of which receivelen:wacom_intuos_pro2_bt_pen(wacom); if (type == INTUOSP2_BT || type == INTUOSP2S_BT) { wacom_intuos_pro2_bt_touch(wacom); wacom_intuos_pro2_bt_pad(wacom); wacom_intuos_pro2_bt_battery(wacom); } else { wacom_intuos_gen3_bt_pad(wacom); wacom_intuos_gen3_bt_battery(wacom); }Each sub-parser dereferences
wacom->dataat fixed offsets. The furthest byte touched on each branch is:
INTUOSP2_BT/INTUOSP2S_BT:wacom_intuos_pro2_bt_pad()reads data[285](the touchring byte), so the report must be at least 286 bytes;
INTUOSHT3_BT("gen3"):wacom_intuos_gen3_bt_battery()reads data[45],
so the report must be at least 46 bytes.features.type is selected from the VID/PID
id_tableentry andwacom_setup_device_quirks()force-registers the pen/pad/touch inputs for that type independent of the report descriptor, so a malicious or malfunctioning paired/spoofed Bluetooth peripheral can advertise that VID/PID and send an undersized report that still satisfies the data[0] == 0x80/0x81 gate. The driver then reads past the received report and forwards the bytes to userspace via evdev (MSC_SERIAL/ABS_MISC/ABS_WHEELon the pen and pad input nodes), an out-of-bounds read with a concrete userspace read-back channel, and a true out-of-bounds read on transports whose backing buffer is sized to the (small) report descriptor rather than a fixed-size staging buffer.This is the same class of bug commit
2f1763f62909("HID: wacom: fix out-of-bounds read inwacom_intuos_bt_irq") already hardened in the siblingwacom_intuos_bt_irq(), which guards each report id against its minimum length before parsing.Guard
wacom_intuos_pro2_bt_irq()the same way: before parsing, reject reports shorter than the furthest offset the selected branch actually dereferences, warn, and bail out. Because the whole pen/touch/pad/ battery chain runs unconditionally per branch, a single up-front check against the maximum offset (286 bytes for INTUOSP2_BT/INTUOSP2S_BT, 46 bytes for the gen3 branch) bounds every sub-parser. Returning 0 on a short report also skips those calls for the same malformed report, which is the safe, conservative behavior.Fixes 4922cd26f03c ("HID: wacom: Support 2nd-gen Intuos Pro's Bluetooth classic interface")Signed-off-by Ibrahim Hashimov <[email protected]>Assisted-by AuditCode-AI:2026.07---
v2: the v1 check (len < 109 / len < 43) only bounded
wacom_intuos_pro2_bt_pen(). As sashiko-bot pointed out, the unconditional touch/pad/battery calls read much further --wacom_intuos_pro2_bt_pad()up to data[285] andwacom_intuos_gen3_bt_battery()up to data[45] -- so a report in the gap (109..285 / 43..45) passed the guard yet still over-read. Raise the minimums to the furthest offset each branch dereferences (286 / 46) so the guard actually bounds the whole call chain.drivers/hid/wacom_wac.c | 13 +++++++++++++ 1 file changed, 13 insertions(+)drivers/hid/wacom_wac.c +13
-1@@ -1548,6 +1548,19 @@ static int wacom_intuos_pro2_bt_irq(struct wacom_wac *wacom, size_t len)return 0 ; } +if (wacom->features.type ==INTUOSP2_BT || + wacom->features.type ==INTUOSP2S_BT ) { +if (len <286 ) { +dev_warn (wacom->pen_input->dev.parent, +"Pro2 BT report too short: %zu bytes\n" , len); +return 0 ; + } + }else if (len <46 ) { +dev_warn (wacom->pen_input->dev.parent, +"Pro2 BT report too short: %zu bytes\n" , len); +return 0 ; + } +wacom_intuos_pro2_bt_pen (wacom);if (wacom->features.type ==INTUOSP2_BT || wacom->features.type ==INTUOSP2S_BT ) { --2.50.1 (Apple Git-155)
Re: [PATCH v2] HID: wacom: validate report length in wacom_intuos_pro2_bt_irq
In reply to Ibrahim HashimovQuoted 50 lines · Ibrahim Hashimov
wacom_intuos_pro2_bt_irq()receives the wire report length inlenbut never consults it before parsing. After the report-id gate it unconditionally callswacom_intuos_pro2_bt_pen()and then, selected by features.type, a fixed chain of sub-parsers, none of which receivelen:wacom_intuos_pro2_bt_pen(wacom); if (type == INTUOSP2_BT || type == INTUOSP2S_BT) { wacom_intuos_pro2_bt_touch(wacom); wacom_intuos_pro2_bt_pad(wacom); wacom_intuos_pro2_bt_battery(wacom); } else { wacom_intuos_gen3_bt_pad(wacom); wacom_intuos_gen3_bt_battery(wacom); }Each sub-parser dereferences
wacom->dataat fixed offsets. The furthest byte touched on each branch is:
INTUOSP2_BT/INTUOSP2S_BT:wacom_intuos_pro2_bt_pad()reads data[285](the touchring byte), so the report must be at least 286 bytes;
INTUOSHT3_BT("gen3"):wacom_intuos_gen3_bt_battery()reads data[45],
so the report must be at least 46 bytes.features.type is selected from the VID/PID
id_tableentry andwacom_setup_device_quirks()force-registers the pen/pad/touch inputs for that type independent of the report descriptor, so a malicious or malfunctioning paired/spoofed Bluetooth peripheral can advertise that VID/PID and send an undersized report that still satisfies the data[0] == 0x80/0x81 gate. The driver then reads past the received report and forwards the bytes to userspace via evdev (MSC_SERIAL/ABS_MISC/ABS_WHEELon the pen and pad input nodes), an out-of-bounds read with a concrete userspace read-back channel, and a true out-of-bounds read on transports whose backing buffer is sized to the (small) report descriptor rather than a fixed-size staging buffer.This is the same class of bug commit
2f1763f62909("HID: wacom: fix out-of-bounds read inwacom_intuos_bt_irq") already hardened in the siblingwacom_intuos_bt_irq(), which guards each report id against its minimum length before parsing.Guard
wacom_intuos_pro2_bt_irq()the same way: before parsing, reject reports shorter than the furthest offset the selected branch actually dereferences, warn, and bail out. Because the whole pen/touch/pad/ battery chain runs unconditionally per branch, a single up-front check against the maximum offset (286 bytes for INTUOSP2_BT/INTUOSP2S_BT, 46 bytes for the gen3 branch) bounds every sub-parser. Returning 0 on a short report also skips those calls for the same malformed report, which is the safe, conservative behavior.
Quoted 4 lines
Fixes 4922cd26f03c ("HID: wacom: Support 2nd-gen Intuos Pro's Bluetooth classic interface")Signed-off-by Ibrahim Hashimov <[email protected]>Assisted-by AuditCode-AI:2026.07
Applied, thanks.
Signature · 2 lines
Jiri Kosina SUSE Labs