usb: ehci: Allow ehci accessors to be overridden.
Subsystems (3)
cover usb: ehci: Allow ehci accessors to be overridden.
In the kernel tree at the moment there is a driver for fotg210. There was, I think, at some point a driver for the host only version of this too. With a few tweaks the host part can actually just use the ehci driver and a bunch of code can be dropped.
The weird ARM SoCs I have been trying to mainline have the host only version of this IP and have been running with a modified version of the normal ehci driver for years.
To use the ehci driver we need to be able to override the accessors for the registers, override the standard locations of a few of them and hardcode values for some things that are not needed.
Before I clean up and send the rest of this I wanted to show how I did the overriding of the accessors and how it cleans up the hack that is already in there. If this way of doing it is acceptable I'll clean up the whole thing and send it.
The benefit of this is that we should be able to drop one mangled copy of the ehci driver.
Daniel Palmer (2):
usb: ehci: Add option to override ehci_readl()/ehci_writel()
usb: chipidea: use the generic ehci_writel override for i.MX28
drivers/usb/chipidea/Kconfig | 1 + drivers/usb/chipidea/host.c | 17 ++++++++++++++++- drivers/usb/host/Kconfig | 3 +++ drivers/usb/host/ehci.h | 31 ++++++++++++++++--------------- 4 files changed, 36 insertions(+), 16 deletions(-)
Signature · 1 line
2.53.0
RFC PATCH 1/2 usb: ehci: Add option to override ehci_readl()/ehci_writel()
From: Daniel Palmer <[email protected]>
There are EHCI-like hosts, like fotg210, out there that should be able to use the shared ehci code but can't because they need to override some parts of the ehci code to work properly.
Let ehci_readl() and ehci_writel() be overridden first. This allows the ehci code to be used with hosts that need to do special dances when accessing their registers.
The change is hidden behind a boolean kconfig option so that the extra function pointer NULL check and call only happens when a broken controller is enabled.
--- drivers/usb/host/Kconfig | 3 +++ drivers/usb/host/ehci.h | 16 ++++++++++++++++ 2 files changed, 19 insertions(+)
drivers/usb/host/Kconfig +3 -0
@@ -362,6 +362,9 @@ config USB_OCTEON_EHCI USB 2.0 device support. All CN6XXX based chips with USB are supported. +config HAVE_BROKEN_EHCI_HCD + bool + endif # USB_EHCI_HCD config USB_OXU210HP_HCD
drivers/usb/host/ehci.h +16 -0
@@ -258,6 +258,14 @@ struct ehci_hcd { /* one per controller *//* us budgeted per uframe */ struct list_head tt_list; +#ifdef CONFIG_HAVE_BROKEN_EHCI_HCD +/* Overrides to fix up broken implementations */ +/* Broken IO */ +void (*ehci_writel)(const struct ehci_hcd *ehci, +const unsigned int val,__u32 __iomem *regs); +unsigned int (*ehci_readl)(const struct ehci_hcd *ehci,__u32 __iomem *regs); +#endif +/* platform-specific data -- must come last */ unsigned long priv[]__aligned(sizeof(s64)) ; };
@@ -762,6 +770,10 @@ static inline unsigned int ehci_readl(const struct ehci_hcd *ehci, readl_be(regs) :readl (regs );#else +#ifdef CONFIG_HAVE_BROKEN_EHCI_HCD +if (ehci->ehci_readl) +return ehci->ehci_readl (ehci, regs); +#endif return readl (regs);#endif }
@@ -788,6 +800,10 @@ static inline void ehci_writel(const struct ehci_hcd *ehci,#else if (ehci->imx28_write_fix)imx28_ehci_writel (val, regs); +#ifdef CONFIG_HAVE_BROKEN_EHCI_HCD + else if (ehci->ehci_writel) + ehci->ehci_writel(ehci, val, regs); +#endif elsewritel (val ,regs );#endif
Signature · 1 line
2.53.0
Alan Stern
maintainerRe: [RFC PATCH 1/2] usb: ehci: Add option to override ehci_readl()/ehci_writel()
Quoted 25 lines · Daniel Palmer
From: Daniel Palmer <[email protected]>
There are EHCI-like hosts, like fotg210, out there that should be able to use the shared ehci code but can't because they need to override some parts of the ehci code to work properly.
Let
ehci_readl()andehci_writel()be overridden first. This allows the ehci code to be used with hosts that need to do special dances when accessing their registers.The change is hidden behind a boolean kconfig option so that the extra function pointer NULL check and call only happens when a broken controller is enabled.
Signed-off-by Daniel Palmer <[email protected]>--- drivers/usb/host/Kconfig | 3 +++ drivers/usb/host/ehci.h | 16 ++++++++++++++++ 2 files changed, 19 insertions(+)drivers/usb/host/Kconfig +0
-0
drivers/usb/host/Kconfig config USB_OCTEON_EHCI · line 366
Quoted 5 lines
drivers/usb/host/Kconfig +2
-0@@ -362,6 +362,9 @@ config USB_OCTEON_EHCI USB 2.0 device support. All CN6XXX based chips with USB are supported. +config HAVE_BROKEN_EHCI_HCD + bool
That is not a good choice of name; it's far too generic. EHCI controllers can be broken in so many different ways...
How about USB_EHCI_MMIO_OVERRIDES instead?
Also, the way this is implemented below implicitly assumes that the new CONFIG flag will never be set at the same time as USB_EHCI_BIG_ENDIAN_MMIO. That should be enforced here. Even though IMX28 doesn't do it, someone else might do it in the future.
Quoted 9 lines
drivers/usb/host/Kconfig +1
-0+ endif # USB_EHCI_HCD config USB_OXU210HP_HCDdrivers/usb/host/ehci.h +0
-0
drivers/usb/host/ehci.h struct ehci_hcd { /* one per controller */ · line 263
Quoted 6 lines
drivers/usb/host/ehci.h +3
-0@@ -258,6 +258,14 @@ struct ehci_hcd { /* one per controller *//* us budgeted per uframe */ struct list_head tt_list; +#ifdef CONFIG_HAVE_BROKEN_EHCI_HCD +/* Overrides to fix up broken implementations */ +/* Broken IO */
Similarly, the comment should be improved. "Overrides to fix up broken MMIO implementations".
Alan Stern
Quoted 33 lines
drivers/usb/host/ehci.h +13
-0+void (*ehci_writel)(const struct ehci_hcd *ehci, +const unsigned int val,__u32 __iomem *regs); +unsigned int (*ehci_readl)(const struct ehci_hcd *ehci,__u32 __iomem *regs); +#endif +/* platform-specific data -- must come last */ unsigned long priv[]__aligned(sizeof(s64)) ; };@@ -762,6 +770,10 @@ static inline unsigned int ehci_readl(const struct ehci_hcd *ehci, readl_be(regs) :readl (regs );#else +#ifdef CONFIG_HAVE_BROKEN_EHCI_HCD +if (ehci->ehci_readl) +return ehci->ehci_readl (ehci, regs); +#endif return readl (regs);#endif }@@ -788,6 +800,10 @@ static inline void ehci_writel(const struct ehci_hcd *ehci,#else if (ehci->imx28_write_fix)imx28_ehci_writel (val, regs); +#ifdef CONFIG_HAVE_BROKEN_EHCI_HCD + else if (ehci->ehci_writel) + ehci->ehci_writel(ehci, val, regs); +#endif elsewritel (val ,regs );#endif Signature · 1 line
2.53.0
Re: [RFC PATCH 1/2] usb: ehci: Add option to override ehci_readl()/ehci_writel()
Hi Alan,
Quoted 7 lines · Alan Stern
drivers/usb/host/Kconfig config USB_OCTEON_EHCI · line 366
Quoted 2 lines
drivers/usb/host/Kconfig +2
-0+config HAVE_BROKEN_EHCI_HCD + boolThat is not a good choice of name; it's far too generic. EHCI controllers can be broken in so many different ways...
How about
USB_EHCI_MMIO_OVERRIDESinstead?
Noted. Based on that we'd have a config for each piece that needs to be overridden so drivers can pick the ones they need?
Quoted 4 lines
Also, the way this is implemented below implicitly assumes that the new CONFIG flag will never be set at the same time as
USB_EHCI_BIG_ENDIAN_MMIO. That should be enforced here. Even though IMX28 doesn't do it, someone else might do it in the future.
Sashiko picked this up as well suggesting there are some pre-existing issues.. I'll work out what to do here.
I think the situation sashiko was complaining about was imx28 running a big endian kernel so its workaround never gets applied but I think that might be impossible. :)
Quoted 12 lines
Quoted 12 lines
drivers/usb/host/Kconfig +1
-0+ endif # USB_EHCI_HCD config USB_OXU210HP_HCDdrivers/usb/host/ehci.h +0
-0@@ -258,6 +258,14 @@ struct ehci_hcd { /* one per controller *//* us budgeted per uframe */ struct list_head tt_list;
Quoted 6 lines
drivers/usb/host/ehci.h struct ehci_hcd { /* one per controller */ · line 263
Quoted 3 lines
drivers/usb/host/ehci.h +3
-0+#ifdef CONFIG_HAVE_BROKEN_EHCI_HCD +/* Overrides to fix up broken implementations */ +/* Broken IO */ Similarly, the comment should be improved. "Overrides to fix up broken MMIO implementations".
Noted. My intention was to have all of the brokenness inside the single #ifdef and then have a comment for what each function pointer allows you to fix up.
If there is a config per workaround I'll put a comment in each saying what that workaround is for.
Thanks,
Daniel
Alan Stern
maintainerRe: [RFC PATCH 1/2] usb: ehci: Add option to override ehci_readl()/ehci_writel()
Quoted 6 lines · Daniel Palmer
Hi Alan,
Quoted 3 lines · Alan Stern
Quoted 2 lines
drivers/usb/host/Kconfig +2
-0+config HAVE_BROKEN_EHCI_HCD + bool
Quoted 7 lines
Quoted 4 lines
That is not a good choice of name; it's far too generic. EHCI controllers can be broken in so many different ways...
How about
USB_EHCI_MMIO_OVERRIDESinstead?Noted. Based on that we'd have a config for each piece that needs to be overridden so drivers can pick the ones they need?
Maybe. What other things will need to be overridden? It's hard to tell what you're planning from just a single sample.
Note that some of the things that are already present in the code can be thought of as overrides (although generally not for a broken feature).
Alan Stern
Re: [RFC PATCH 1/2] usb: ehci: Add option to override ehci_readl()/ehci_writel()
Hi Alan,
Quoted 11 lines · Alan Stern
Quoted 9 lines · Daniel Palmer
Hi Alan,
Quoted 6 lines · Alan Stern
drivers/usb/host/Kconfig config USB_OCTEON_EHCI · line 366
Quoted 2 lines
drivers/usb/host/Kconfig +2
-0+config HAVE_BROKEN_EHCI_HCD + boolThat is not a good choice of name; it's far too generic. EHCI controllers can be broken in so many different ways...
Quoted 7 lines
Quoted 4 lines
Quoted 1 line
How about
USB_EHCI_MMIO_OVERRIDESinstead?Noted. Based on that we'd have a config for each piece that needs to be overridden so drivers can pick the ones they need?
Maybe. What other things will need to be overridden? It's hard to tell what you're planning from just a single sample.
For the fotg210 at least the location of the port status register needs to be overridden, it doesn't support sITDs so that has to be blocked, and the hardware has a bug where the length of ITDs is broken so it needs to have a workaround to write the value it wants.
Cheers,
Daniel
Alan Stern
maintainerRe: [RFC PATCH 1/2] usb: ehci: Add option to override ehci_readl()/ehci_writel()
Quoted 19 lines · Daniel Palmer
Hi Alan,
Quoted 16 lines · Alan Stern
Quoted 13 lines · Daniel Palmer
Hi Alan,
Quoted 7 lines · Alan Stern
drivers/usb/host/Kconfig config USB_OCTEON_EHCI · line 366
Quoted 2 lines
drivers/usb/host/Kconfig +2
-0+config HAVE_BROKEN_EHCI_HCD + boolThat is not a good choice of name; it's far too generic. EHCI controllers can be broken in so many different ways...
How about
USB_EHCI_MMIO_OVERRIDESinstead?Noted. Based on that we'd have a config for each piece that needs to be overridden so drivers can pick the ones they need?
Quoted 7 lines
Quoted 2 lines
Maybe. What other things will need to be overridden? It's hard to tell what you're planning from just a single sample.
For the fotg210 at least the location of the port status register needs to be overridden, it doesn't support sITDs so that has to be blocked, and the hardware has a bug where the length of ITDs is broken so it needs to have a workaround to write the value it wants.
Okay. I think it makes sense to have a separate CONFIG flag for each of these.
Alan Stern
RFC PATCH 2/2 usb: chipidea: use the generic ehci_writel override for i.MX28
In reply to Daniel PalmerFrom: Daniel Palmer <[email protected]>
The EHCI core carries an imx28_write_fix flag baked into ehci_writel() that special-cases the i.MX28's need for a swp instruction when writing the EHCI registers.
Now that the EHCI core provides a generic ehci_writel override hook, convert the chipidea host glue to install its own writel via that hook and drop the i.MX28 special case from the core, keeping ehci_writel() free of SoC-specific knowledge.
--- drivers/usb/chipidea/Kconfig | 1 + drivers/usb/chipidea/host.c | 17 ++++++++++++++++- drivers/usb/host/ehci.h | 19 ++----------------- 3 files changed, 19 insertions(+), 18 deletions(-)
drivers/usb/chipidea/Kconfig +1 -0
@@ -29,6 +29,7 @@ config USB_CHIPIDEA_HOST bool "ChipIdea host controller" depends on USB_EHCI_HCD select USB_EHCI_ROOT_HUB_TT + select HAVE_BROKEN_EHCI_HCD if SOC_IMX28 help Say Y here to enable host controller functionality of the ChipIdea driver.
drivers/usb/chipidea/host.c +16 -1
@@ -117,6 +117,18 @@ static irqreturn_t host_irq(struct ci_hdrc *ci)return usb_hcd_irq (ci->irq, ci->hcd); } +#ifdef CONFIG_SOC_IMX28 +/* +* The i.MX28 needs a swp instruction rather than a normal write to the +* EHCI registers; provide it through the generic ehci_writel override. +*/ +static void ci_hdrc_ehci_writel (const struct ehci_hcd *ehci, +const unsigned int val,__u32 __iomem *regs) +{ + asm("swp %0, %0, [%1]" : :"r" (val),"r" (regs)); +} +#endif +static int host_start (struct ci_hdrc *ci) {struct usb_hcd *hcd;
@@ -150,7 +162,10 @@ static int host_start(struct ci_hdrc *ci) ehci->caps = ci->hw_bank.cap; ehci->has_hostpc = ci->hw_bank.lpm; ehci->has_tdi_phy_lpm = ci->hw_bank.lpm; - ehci->imx28_write_fix = ci->imx28_write_fix; +#ifdef CONFIG_SOC_IMX28 +if (ci->imx28_write_fix) + ehci->ehci_writel = ci_hdrc_ehci_writel; +#endif ehci->has_ci_pec_bug = ci->has_portsc_pec_bug; priv = (struct ehci_ci_priv *)ehci->priv;
drivers/usb/host/ehci.h +2 -17
@@ -218,7 +218,6 @@ struct ehci_hcd { /* one per controller */ unsigned has_synopsys_hc_bug:1; /* Synopsys HC */ unsigned frame_index_bug:1; /* MosChip (AKA NetMos) */ unsigned need_oc_pp_cycle:1; /* MPC834X port power */ - unsigned imx28_write_fix:1; /* For Freescale i.MX28 */ unsigned spurious_oc:1; unsigned is_aspeed:1; unsigned zx_wakeup_clear_needed:1;
@@ -778,18 +777,6 @@ static inline unsigned int ehci_readl(const struct ehci_hcd *ehci,#endif } -#ifdef CONFIG_SOC_IMX28 -static inline void imx28_ehci_writel (const unsigned int val, -volatile __u32 __iomem *addr) -{ - __asm__ ("swp %0, %0, [%1]" : :"r" (val),"r" (addr)); -} -#else -static inline void imx28_ehci_writel (const unsigned int val, -volatile __u32 __iomem *addr) -{ -} -#endif static inline void ehci_writel (const struct ehci_hcd *ehci,const unsigned int val,__u32 __iomem *regs) {
@@ -798,13 +785,11 @@ static inline void ehci_writel(const struct ehci_hcd *ehci, writel_be(val, regs) :writel (val, regs);#else -if (ehci->imx28_write_fix) -imx28_ehci_writel (val, regs);#ifdef CONFIG_HAVE_BROKEN_EHCI_HCD - else if (ehci->ehci_writel) +if (ehci->ehci_writel) ehci->ehci_writel (ehci, val, regs); -#endif else +#endif writel (val, regs);#endif }
Signature · 1 line
2.53.0
Peter Chen
maintainerRe: [RFC PATCH 2/2] usb: chipidea: use the generic ehci_writel override for i.MX28
Quoted 23 lines · Daniel Palmer
From: Daniel Palmer <[email protected]>
The EHCI core carries an
imx28_write_fixflag baked intoehci_writel()that special-cases the i.MX28's need for a swp instruction when writing the EHCI registers.Now that the EHCI core provides a generic
ehci_writeloverride hook, convert the chipidea host glue to install its own writel via that hook and drop the i.MX28 special case from the core, keepingehci_writel()free of SoC-specific knowledge.Signed-off-by Daniel Palmer <[email protected]>--- drivers/usb/chipidea/Kconfig | 1 + drivers/usb/chipidea/host.c | 17 ++++++++++++++++- drivers/usb/host/ehci.h | 19 ++----------------- 3 files changed, 19 insertions(+), 18 deletions(-)drivers/usb/chipidea/Kconfig +0
-0
drivers/usb/chipidea/Kconfig config USB_CHIPIDEA_HOST · line 32
Quoted 4 lines
drivers/usb/chipidea/Kconfig +1
-0@@ -29,6 +29,7 @@ config USB_CHIPIDEA_HOST bool "ChipIdea host controller" depends on USB_EHCI_HCD select USB_EHCI_ROOT_HUB_TT + select HAVE_BROKEN_EHCI_HCD if SOC_IMX28
Is the SoC you are trying adding support imx28? If it is not, I could not understand why you add this patch.
Peter
Quoted 88 lines
drivers/usb/chipidea/Kconfig +0
-0help Say Y here to enable host controller functionality of the ChipIdea driver.drivers/usb/chipidea/host.c +16
-1@@ -117,6 +117,18 @@ static irqreturn_t host_irq(struct ci_hdrc *ci)return usb_hcd_irq (ci->irq, ci->hcd); } +#ifdef CONFIG_SOC_IMX28 +/* +* The i.MX28 needs a swp instruction rather than a normal write to the +* EHCI registers; provide it through the generic ehci_writel override. +*/ +static void ci_hdrc_ehci_writel (const struct ehci_hcd *ehci, +const unsigned int val,__u32 __iomem *regs) +{ + asm("swp %0, %0, [%1]" : :"r" (val),"r" (regs)); +} +#endif +static int host_start (struct ci_hdrc *ci) {struct usb_hcd *hcd;@@ -150,7 +162,10 @@ static int host_start(struct ci_hdrc *ci) ehci->caps = ci->hw_bank.cap; ehci->has_hostpc = ci->hw_bank.lpm; ehci->has_tdi_phy_lpm = ci->hw_bank.lpm; - ehci->imx28_write_fix = ci->imx28_write_fix; +#ifdef CONFIG_SOC_IMX28 +if (ci->imx28_write_fix) + ehci->ehci_writel = ci_hdrc_ehci_writel; +#endif ehci->has_ci_pec_bug = ci->has_portsc_pec_bug; priv = (struct ehci_ci_priv *)ehci->priv;drivers/usb/host/ehci.h +2
-17@@ -218,7 +218,6 @@ struct ehci_hcd { /* one per controller */ unsigned has_synopsys_hc_bug:1; /* Synopsys HC */ unsigned frame_index_bug:1; /* MosChip (AKA NetMos) */ unsigned need_oc_pp_cycle:1; /* MPC834X port power */ - unsigned imx28_write_fix:1; /* For Freescale i.MX28 */ unsigned spurious_oc:1; unsigned is_aspeed:1; unsigned zx_wakeup_clear_needed:1;@@ -778,18 +777,6 @@ static inline unsigned int ehci_readl(const struct ehci_hcd *ehci,#endif } -#ifdef CONFIG_SOC_IMX28 -static inline void imx28_ehci_writel (const unsigned int val, -volatile __u32 __iomem *addr) -{ - __asm__ ("swp %0, %0, [%1]" : :"r" (val),"r" (addr)); -} -#else -static inline void imx28_ehci_writel (const unsigned int val, -volatile __u32 __iomem *addr) -{ -} -#endif static inline void ehci_writel (const struct ehci_hcd *ehci,const unsigned int val,__u32 __iomem *regs) {@@ -798,13 +785,11 @@ static inline void ehci_writel(const struct ehci_hcd *ehci, writel_be(val, regs) :writel (val, regs);#else -if (ehci->imx28_write_fix) -imx28_ehci_writel (val, regs);#ifdef CONFIG_HAVE_BROKEN_EHCI_HCD - else if (ehci->ehci_writel) +if (ehci->ehci_writel) ehci->ehci_writel (ehci, val, regs); -#endif else +#endif writel (val, regs);#endif }Signature · 1 line
2.53.0
Signature · 2 lines
Thanks, Peter Chen
Re: [RFC PATCH 2/2] usb: chipidea: use the generic ehci_writel override for i.MX28
Hi Peter,
Quoted 4 lines · Peter Chen
Quoted 1 line
+ select
HAVE_BROKEN_EHCI_HCDifSOC_IMX28Is the SoC you are trying adding support imx28? If it is not, I could not understand why you add this patch.
I need to override the accessors for ehci registers to use the ehci core code with another USB controller. The only in-kernel example of doing this is IMX28 hence I used it as the example of what I want to do for the RFC. Also this shows that the IMX28 code would move out of the ehci core with this change.
Thanks,
Daniel