hwmon: (lm90) Switch channel parsing to fwnode APIs
Subsystems (2)
PATCH 1/1 hwmon: (lm90) Switch channel parsing to fwnode APIs
Replace OF property handling with fwnode API in the probe function to read the channels properties, improving the driver compatibility since this method is not limited to Device Tree only.
Add also the needed headers for explicit include and clean up related function naming.
--- drivers/hwmon/lm90.c | 48 +++++++++++++++++++++----------------------- 1 file changed, 23 insertions(+), 25 deletions(-)
drivers/hwmon/lm90.c +23 -25
@@ -101,14 +101,16 @@#include <linux/bits.h> #include <linux/device.h> #include <linux/err.h> +#include <linux/fwnode.h> #include <linux/i2c.h> #include <linux/init.h> #include <linux/interrupt.h> #include <linux/jiffies.h> #include <linux/hwmon.h> #include <linux/kstrtox.h> +#include <linux/mod_devicetable.h> #include <linux/module.h> -#include <linux/of.h> +#include <linux/property.h> #include <linux/regulator/consumer.h> #include <linux/slab.h> #include <linux/workqueue.h>
@@ -295,7 +297,7 @@ static const struct i2c_device_id lm90_id[] = { };MODULE_DEVICE_TABLE (i2c, lm90_id); -static const struct of_device_id __maybe_unused lm90_of_match[] = { +static const struct of_device_id lm90_of_match[] = { { .compatible ="adi,adm1032" , .data = (void *)adm1032
@@ -2602,7 +2604,6 @@ static void lm90_stop_work(void *_data)static int lm90_init_client (struct i2c_client *client,struct lm90_data *data) { -struct device_node *np = client->dev.of_node;int config, convrate;if (data->flags &LM90_HAVE_CONVRATE ) {
@@ -2626,7 +2627,7 @@ static int lm90_init_client(struct i2c_client *client, struct lm90_data *data)/* Check Temperature Range Select */ if (data->flags &LM90_HAVE_EXTENDED_TEMP ) { -if (of_property_read_bool (np,"ti,extended-range-enable" )) +if (device_property_read_bool (&client->dev,"ti,extended-range-enable" )) config |=0x04 ;if (!(config &0x04 )) data->flags &= ~LM90_HAVE_EXTENDED_TEMP ;
@@ -2692,8 +2693,8 @@ static irqreturn_t lm90_irq_thread(int irq, void *dev_id)return IRQ_NONE ; } -static int lm90_probe_channel_from_dt (struct i2c_client *client, -struct device_node *child, +static int lm90_probe_channel (struct i2c_client *client, +struct fwnode_handle *child,struct lm90_data *data) {u32 id;
@@ -2701,27 +2702,27 @@ static int lm90_probe_channel_from_dt(struct i2c_client *client,int err;struct device *dev = &client->dev; - err =of_property_read_u32 (child,"reg" , &id); + err =fwnode_property_read_u32 (child,"reg" , &id);if (err) { -dev_err (dev,"missing reg property of %pOFn\n" , child); +dev_err (dev,"missing reg property of %pfw\n" , child);return err; }if (id >=MAX_CHANNELS ) { -dev_err (dev,"invalid reg property value %d in %pOFn\n" , id, child); +dev_err (dev,"invalid reg property value %d in %pfw\n" , id, child);return -EINVAL ; } - err =of_property_read_string (child,"label" , &data->channel_label[id]); + err =fwnode_property_read_string (child,"label" , &data->channel_label[id]);if (err == -ENODATA || err == -EILSEQ ) { -dev_err (dev,"invalid label property in %pOFn\n" , child); +dev_err (dev,"invalid label property in %pfw\n" , child);return err; }if (data->channel_label[id]) data->channel_config[id] |=HWMON_T_LABEL ; - err =of_property_read_s32 (child,"temperature-offset-millicelsius" , &val); + err =fwnode_property_read_u32 (child,"temperature-offset-millicelsius" , &val);if (!err) {if (id ==0 ) {dev_err (dev,"temperature-offset-millicelsius can't be set for internal channel\n" );
@@ -2739,18 +2740,17 @@ static int lm90_probe_channel_from_dt(struct i2c_client *client,return 0 ; } -static int lm90_parse_dt_channel_info (struct i2c_client *client, -struct lm90_data *data) +static int lm90_parse_channel_info (struct i2c_client *client, +struct lm90_data *data) {int err;struct device *dev = &client->dev; -const struct device_node *np = dev->of_node; -for_each_child_of_node_scoped (np, child) { -if (strcmp (child->name,"channel" )) +device_for_each_child_node_scoped (dev, child) { +if (!fwnode_name_eq (child,"channel" ))continue ; - err =lm90_probe_channel_from_dt (client, child, data); + err =lm90_probe_channel (client, child, data);if (err)return err; }
@@ -2887,12 +2887,10 @@ static int lm90_probe(struct i2c_client *client)/* Set maximum conversion rate */ data->max_convrate = lm90_params[data->kind].max_convrate; -/* Parse device-tree channel information */ -if (client->dev.of_node) { - err =lm90_parse_dt_channel_info (client, data); -if (err) -return err; - } +/* Parse channel information */ + err =lm90_parse_channel_info (client, data); +if (err) +return err;/* Initialize the LM90 chip */ err =lm90_init_client (client, data);
@@ -2985,7 +2983,7 @@ static struct i2c_driver lm90_driver = { .class = I2C_CLASS_HWMON, .driver = { .name = "lm90", - .of_match_table = of_match_ptr(lm90_of_match), + .of_match_table = lm90_of_match, .pm = pm_sleep_ptr(&lm90_pm_ops), }, .probe = lm90_probe,
Signature · 1 line
2.34.1
[email protected]
AI reviewSashiko has reviewed this patch and found no issues. It looks great!
Quoted 7 lines
Replace OF property handling with fwnode API in the probe function to read the channels properties, improving the driver compatibility since this method is not limited to Device Tree only.
Add also the needed headers for explicit include and clean up related function naming.Signed-off-by Flaviu Nistor <[email protected]>
Sashiko has reviewed this patch and found no issues. It looks great!
Signature · 1 line
Sashiko AI review · https://sashiko.dev/#/patchset/[email protected]?part=1
Hello,
Quoted 17 lines · Flaviu Nistor
Replace OF property handling with fwnode API in the probe function to read the channels properties, improving the driver compatibility since this method is not limited to Device Tree only.
Add also the needed headers for explicit include and clean up related function naming.Signed-off-by Flaviu Nistor <[email protected]>--- drivers/hwmon/lm90.c | 48 +++++++++++++++++++++----------------------- 1 file changed, 23 insertions(+), 25 deletions(-)drivers/hwmon/lm90.c +0
-0@@ -101,14 +101,16 @@#include <linux/bits.h>
drivers/hwmon/lm90.c line 111
Quoted 10 lines
drivers/hwmon/lm90.c +2
-0#include <linux/device.h> #include <linux/err.h> +#include <linux/fwnode.h> #include <linux/i2c.h> #include <linux/init.h> #include <linux/interrupt.h> #include <linux/jiffies.h> #include <linux/hwmon.h> #include <linux/kstrtox.h> +#include <linux/mod_devicetable.h>
<linux/mod_devicetable.h> is going away soon. Please rely on <linux/i2c.h> to provide of_device_id.
drivers/hwmon/lm90.c line 116
Quoted 6 lines
drivers/hwmon/lm90.c +1
-1#include <linux/module.h> -#include <linux/of.h> +#include <linux/property.h> #include <linux/regulator/consumer.h> #include <linux/slab.h> #include <linux/workqueue.h>
Best regards
Uwe
Guenter Roeck
maintainerQuoted 25 lines · Uwe Kleine-König
Hello,
Quoted 22 lines · Flaviu Nistor
Replace OF property handling with fwnode API in the probe function to read the channels properties, improving the driver compatibility since this method is not limited to Device Tree only.
Add also the needed headers for explicit include and clean up related function naming.Signed-off-by Flaviu Nistor <[email protected]>--- drivers/hwmon/lm90.c | 48 +++++++++++++++++++++----------------------- 1 file changed, 23 insertions(+), 25 deletions(-)drivers/hwmon/lm90.c +1
-0@@ -101,14 +101,16 @@#include <linux/bits.h> #include <linux/device.h> #include <linux/err.h> +#include <linux/fwnode.h> #include <linux/i2c.h> #include <linux/init.h>
Quoted 9 lines
drivers/hwmon/lm90.c line 111
Quoted 5 lines
drivers/hwmon/lm90.c +1
-0#include <linux/interrupt.h> #include <linux/jiffies.h> #include <linux/hwmon.h> #include <linux/kstrtox.h> +#include <linux/mod_devicetable.h> <
linux/mod_devicetable.h> is going away soon. Please rely on <linux/i2c.h> to provideof_device_id.
My hwmon-next branch is based off v7.2-rc1 and of_device_id is declared in mod_devicetable.h.
Guenter
Hello Guenter,
Quoted 33 lines · Guenter Roeck
Quoted 23 lines · Uwe Kleine-König
Quoted 22 lines · Flaviu Nistor
Replace OF property handling with fwnode API in the probe function to read the channels properties, improving the driver compatibility since this method is not limited to Device Tree only.
Add also the needed headers for explicit include and clean up related function naming.Signed-off-by Flaviu Nistor <[email protected]>--- drivers/hwmon/lm90.c | 48 +++++++++++++++++++++----------------------- 1 file changed, 23 insertions(+), 25 deletions(-)drivers/hwmon/lm90.c +1
-0@@ -101,14 +101,16 @@#include <linux/bits.h> #include <linux/device.h> #include <linux/err.h> +#include <linux/fwnode.h> #include <linux/i2c.h> #include <linux/init.h> Quoted 8 lines
drivers/hwmon/lm90.c line 111
Quoted 5 lines
drivers/hwmon/lm90.c +1
-0#include <linux/interrupt.h> #include <linux/jiffies.h> #include <linux/hwmon.h> #include <linux/kstrtox.h> +#include <linux/mod_devicetable.h> <
linux/mod_devicetable.h> is going away soon. Please rely on <linux/i2c.h> to provideof_device_id.
Quoted 2 lines
My hwmon-next branch is based off v7.2-rc1 and
of_device_idis declared inmod_devicetable.h.
That sounds factual correct.
If you want to imply with that statement that my recommendation is wrong, annoying or in other ways unsuitable to you I guess you either have to be more explicit or live with it.
<linux/i2c.h> provides i2c_driver which uses of_device_id (via struct device_driver) and thus includes a header that provides that struct. That won't change in the foreseeable future. If that is not good enough for you, find means to handle that in another way.
Best regards
Uwe