Skip to contentSkip to conversation

bpf, x86: Add support for BPF_SDIV and BPF_SMOD in the i386 JIT

PATCH Superseded Nicholas Dudar 2 participants 3 messages Jul 14

Subsystems (3)

v2 of 3 Superseded Latest is v3 →

lore
Share & tools
lore
#0 lore raw

PATCH v2 1/1 bpf, x86: Add support for BPF_SDIV and BPF_SMOD in the i386 JIT

emit_ia32_div_mod_r() emits an unsigned divide (xor edx,edx + div ecx) for BPF_DIV and BPF_MOD regardless of the instruction's signedness, so the i386 JIT does not implement signed BPF_SDIV and BPF_SMOD (off == 1), which get an unsigned quotient and remainder rather than the verifier's and the interpreter's signed result for negative operands.

Add signed support. Pass the instruction to emit_ia32_div_mod_r() and, on the signed path (off == 1), emit cdq + idiv ecx instead of xor edx,edx + div ecx, mirroring the cdq/idiv-vs-xor/div split the x86_64 JIT uses. bpf_do_misc_fixups() rewrites the zero-divisor and INT_MIN/-1 cases out of the instruction stream before the JIT runs.

The RV32 JIT has the same gap.

Assisted-by Claude:claude-opus-4-8

---
v2:
- Frame as adding support and drop the Fixes tag, per Pu Lehui [1].
- Pass struct bpf_insn * to emit_ia32_div_mod_r() rather than separate op and is_signed parameters, per Kuan-Wei Chiu.

v1: https://lore.kernel.org/bpf/[email protected]/
[1]: https://lore.kernel.org/bpf/[email protected]/

 arch/x86/net/bpf_jit_comp32.c | 25 +++++++++++++++++--------
 1 file changed, 17 insertions(+), 8 deletions(-)
arch/x86/net/bpf_jit_comp32.c +17 -8
index 852baf2e4db4..012161da3e82 100644
@@ -432,11 +432,13 @@ static inline void emit_ia32_to_be_r64(const u8 dst[], s32 val,
  * ALU operation (32 bit)
  * dst = dst (div|mod) src
  */
-static inline void emit_ia32_div_mod_r(const u8 op, const u8 dst, const u8 src,
-				       bool dstk, bool sstk, u8 **pprog)
+static inline void emit_ia32_div_mod_r(const struct bpf_insn *insn, const u8 dst,
+				       const u8 src, bool dstk, bool sstk, u8 **pprog)
 {
 	u8 *prog = *pprog;
 	int cnt = 0;
+	const u8 op = BPF_OP(insn->code);
+	const bool is_signed = (insn->off == 1);
 
 	if (sstk)
 		/* mov ecx,dword ptr [ebp+off] */
@@ -454,10 +456,17 @@ static inline void emit_ia32_div_mod_r(const u8 op, const u8 dst, const u8 src,
 		/* mov eax,dst */
 		EMIT2(0x8B, add_2reg(0xC0, dst, IA32_EAX));
 
-	/* xor edx,edx */
-	EMIT2(0x31, add_2reg(0xC0, IA32_EDX, IA32_EDX));
-	/* div ecx */
-	EMIT2(0xF7, add_1reg(0xF0, IA32_ECX));
+	if (is_signed) {
+		/* cdq */
+		EMIT1(0x99);
+		/* idiv ecx */
+		EMIT2(0xF7, add_1reg(0xF8, IA32_ECX));
+	} else {
+		/* xor edx,edx */
+		EMIT2(0x31, add_2reg(0xC0, IA32_EDX, IA32_EDX));
+		/* div ecx */
+		EMIT2(0xF7, add_1reg(0xF0, IA32_ECX));
+	}
 
 	if (op == BPF_MOD) {
 		if (dstk)
@@ -1795,14 +1804,14 @@ static int do_jit(struct bpf_prog *bpf_prog, int *addrs, u8 *image,
 		case BPF_ALU | BPF_MOD | BPF_X:
 			switch (BPF_SRC(code)) {
 			case BPF_X:
-				emit_ia32_div_mod_r(BPF_OP(code), dst_lo,
+				emit_ia32_div_mod_r(insn, dst_lo,
 						    src_lo, dstk, sstk, &prog);
 				break;
 			case BPF_K:
 				/* mov ecx,imm32*/
 				EMIT2_off32(0xC7, add_1reg(0xC0, IA32_ECX),
 					    imm32);
-				emit_ia32_div_mod_r(BPF_OP(code), dst_lo,
+				emit_ia32_div_mod_r(insn, dst_lo,
 						    IA32_ECX, dstk, false,
 						    &prog);
 				break;

base-commit: 9a3a07d06e7d74f4aecc51396c771149336ac55d

Signature · 1 line
2.34.1
#1 lore raw
This looks like a bug fix for the i386 JIT compiler. The function emit_ia32_div_mod_r() has only supported unsigned division since it was introduced. Should this include:
Quoted 12 lines

emit_ia32_div_mod_r() emits an unsigned divide (xor edx,edx + div ecx) for BPF_DIV and BPF_MOD regardless of the instruction's signedness, so the i386 JIT does not implement signed BPF_SDIV and BPF_SMOD (off == 1), which get an unsigned quotient and remainder rather than the verifier's and the interpreter's signed result for negative operands.

Add signed support. Pass the instruction to emit_ia32_div_mod_r() and, on the signed path (off == 1), emit cdq + idiv ecx instead of xor edx,edx + div ecx, mirroring the cdq/idiv-vs-xor/div split the x86_64 JIT uses. bpf_do_misc_fixups() rewrites the zero-divisor and INT_MIN/-1 cases out of the instruction stream before the JIT runs.

Quoted 4 lines

The RV32 JIT has the same gap.

Assisted-by Claude:claude-opus-4-8

This looks like a bug fix for the i386 JIT compiler. The function emit_ia32_div_mod_r() has only supported unsigned division since it was introduced. Should this include:

Fixes 03f5781be2c7 ("bpf, x86_32: add eBPF JIT compiler for ia32")

---
AI reviewed your patch. Please fix the bug or email reply why it's not a bug.
See: https://github.com/kernel-patches/vmtest/blob/master/ci/claude/README.md

CI run summary: https://github.com/kernel-patches/bpf/actions/runs/29302361966

author
#2 lore raw
Quoted 5 lines · On Tue, Jul 14, 2026 at 03:36:45AM +0000, [email protected] wrote:

This looks like a bug fix for the i386 JIT compiler. The function emit_ia32_div_mod_r() has only supported unsigned division since it was introduced. Should this include:

Fixes 03f5781be2c7 ("bpf, x86_32: add eBPF JIT compiler for ia32")

The i386 JIT does not implement signed BPF_SDIV/BPF_SMOD. Commit ec0e2da95f72 added these instructions and updated the verifier, interpreter, and x86-64 JIT, but not the other arch JITs. This patch adds that support, targeting bpf-next as a feature, so the Fixes tag does not apply.

Commit 03f5781be2c7 predates these instructions.

Nick