USB: serial: io_edgeport: cap received transmit credits
Subsystems (2)
PATCH v2 1/1 USB: serial: io_edgeport: cap received transmit credits
The interrupt-status packet reports transmit credits returned by the device. edge_interrupt_callback() adds the 16-bit value to txCredits without checking maxTxCredits.
edge_write() uses txCredits minus the software FIFO count as the amount of data that fits. Since the FIFO is allocated with maxTxCredits bytes, txCredits exceeding maxTxCredits can cause OOB write in ring buffer.
Cap accumulated credits at maxTxCredits. Conforming devices should never hit the cap.
--- drivers/usb/serial/io_edgeport.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-)
drivers/usb/serial/io_edgeport.c +3 -1
@@ -646,7 +646,9 @@ static void edge_interrupt_callback(struct urb *urb)if (edge_port && edge_port->open) {spin_lock_irqsave (&edge_port->ep_lock, flags); - edge_port->txCredits += txCredits; + edge_port->txCredits = +min (edge_port->txCredits + txCredits, + edge_port->maxTxCredits);spin_unlock_irqrestore (&edge_port->ep_lock, flags); dev_dbg(dev, "%s - txcredits for port%d = %d\n",
base-commit: fad0fd120e29041b3e6cdf41bb12e3184fb524a2
Signature · 1 line
2.43.0
Greg Kroah-Hartman
maintainerQuoted 35 lines · Sunho Park
The interrupt-status packet reports transmit credits returned by the device.
edge_interrupt_callback()adds the 16-bit value to txCredits without checking maxTxCredits.
edge_write()uses txCredits minus the software FIFO count as the amount of data that fits. Since the FIFO is allocated with maxTxCredits bytes, txCredits exceeding maxTxCredits can cause OOB write in ring buffer.Cap accumulated credits at maxTxCredits. Conforming devices should never hit the cap.
Fixes 1da177e4c3f4 ("Linux-2.6.12-rc2")Assisted-by Codex:GPT-5Signed-off-by Sunho Park <[email protected]>--- drivers/usb/serial/io_edgeport.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-)drivers/usb/serial/io_edgeport.c +3
-1@@ -646,7 +646,9 @@ static void edge_interrupt_callback(struct urb *urb)if (edge_port && edge_port->open) {spin_lock_irqsave (&edge_port->ep_lock, flags); - edge_port->txCredits += txCredits; + edge_port->txCredits = +min (edge_port->txCredits + txCredits, + edge_port->maxTxCredits);spin_unlock_irqrestore (&edge_port->ep_lock, flags); dev_dbg(dev, "%s - txcredits for port%d = %d\n",
Quoted 5 lines
base-commit:
fad0fd120e29041b3e6cdf41bb12e3184fb524a2Signature · 1 line
2.43.0
Hi,
This is the friendly patch-bot of Greg Kroah-Hartman. You have sent him a patch that has triggered this response. He used to manually respond to these common problems, but in order to save his sanity (he kept writing the same thing over and over, yet to different people), I was created. Hopefully you will not take offence and will fix the problem in your patch and resubmit it so that it can be accepted into the Linux kernel tree.
You are receiving this message because of the following common error(s) as indicated below:
- This looks like a new version of a previously submitted patch, but you did not list below the --- line any changes from the previous version. Please read the section entitled "The canonical patch format" in the kernel file, Documentation/process/submitting-patches.rst for what needs to be done here to properly describe this.
If you wish to discuss this problem further, or you have questions about how to resolve this issue, please feel free to respond to this email and Greg will reply once he has dug out from the pending patches received from other developers.
thanks,
greg k-h's patch email bot