Skip to contentSkip to conversation

ASoC: sunxi: Simplify error handling

PATCH In review [email protected] 3 participants 16 messages Jul 15 – Jul 29

Subsystems (3)
lore
Share & tools
lore
#0 lore raw

cover ASoC: sunxi: Simplify error handling

From: bui duc phuc <[email protected]>

Hi all,

This series improves probe error handling in the sunxi ASoC drivers. It replaces suitable probe error paths with dev_err_probe() to simplify the code and handle deferred probe errors consistently. It also removes redundant error messages where the called helpers already report failures, avoiding duplicate log messages.

Build tested only.

Besst regards,
Phuc

bui duc phuc (6):
ASoC: sunxi: sun4i-codec: Use dev_err_probe() for probe error handling
ASoC: sunxi: sun4i-codec: Drop redundant error messages
ASoC: sunxi: sun4i-i2s: Use dev_err_probe() for probe error handling
ASoC: sunxi: sun4i-spdif: Use dev_err_probe() for probe error handling
ASoC: sunxi: sun50i-codec-analog: Improve probe error handling
ASoC: sunxi: sun8i-codec-analog: Improve probe error handling

 sound/soc/sunxi/sun4i-codec.c         | 89 ++++++++++-----------------
 sound/soc/sunxi/sun4i-i2s.c           | 28 ++++-----
 sound/soc/sunxi/sun4i-spdif.c         | 23 +++----
 sound/soc/sunxi/sun50i-codec-analog.c | 11 ++--
 sound/soc/sunxi/sun8i-codec-analog.c  | 11 ++--
 5 files changed, 63 insertions(+), 99 deletions(-)
Signature · 1 line
2.43.0
#1 lore raw

PATCH 1/6 ASoC: sunxi: sun4i-codec: Use dev_err_probe() for probe error handling

From: bui duc phuc <[email protected]>

Use dev_err_probe() for probe error handling to simplify the error paths and handle -EPROBE_DEFER correctly.

---
 sound/soc/sunxi/sun4i-codec.c | 70 ++++++++++++++---------------------
 1 file changed, 28 insertions(+), 42 deletions(-)
sound/soc/sunxi/sun4i-codec.c +28 -42
index f4e22af594fa..05308df3ae5b 100644
@@ -2316,67 +2316,54 @@ static int sun4i_codec_probe(struct platform_device *pdev)
 
 	scodec->regmap = devm_regmap_init_mmio(&pdev->dev, base,
 					       quirks->regmap_config);
-	if (IS_ERR(scodec->regmap)) {
-		dev_err(&pdev->dev, "Failed to create our regmap\n");
-		return PTR_ERR(scodec->regmap);
-	}
+	if (IS_ERR(scodec->regmap))
+		return dev_err_probe(&pdev->dev, PTR_ERR(scodec->regmap),
+				     "Failed to create our regmap\n");
 
 	/* Get the clocks from the DT */
 	scodec->clk_apb = devm_clk_get_enabled(&pdev->dev, "apb");
-	if (IS_ERR(scodec->clk_apb)) {
-		dev_err(&pdev->dev, "Failed to get the APB clock\n");
-		return PTR_ERR(scodec->clk_apb);
-	}
+	if (IS_ERR(scodec->clk_apb))
+		return dev_err_probe(&pdev->dev, PTR_ERR(scodec->clk_apb),
+				     "Failed to get the APB clock\n");
 
 	scodec->clk_module = devm_clk_get(&pdev->dev, "codec");
-	if (IS_ERR(scodec->clk_module)) {
-		dev_err(&pdev->dev, "Failed to get the module clock\n");
-		return PTR_ERR(scodec->clk_module);
-	}
+	if (IS_ERR(scodec->clk_module))
+		return dev_err_probe(&pdev->dev, PTR_ERR(scodec->clk_module),
+				     "Failed to get the module clock\n");
 
 	if (quirks->has_reset) {
 		scodec->rst = devm_reset_control_get_exclusive_deasserted(&pdev->dev, NULL);
-		if (IS_ERR(scodec->rst)) {
-			dev_err(&pdev->dev, "Failed to get reset control\n");
-			return PTR_ERR(scodec->rst);
-		}
+		if (IS_ERR(scodec->rst))
+			return dev_err_probe(&pdev->dev, PTR_ERR(scodec->rst),
+					     "Failed to get reset control\n");
 	}
 
 	scodec->gpio_pa = devm_gpiod_get_optional(&pdev->dev, "allwinner,pa",
 						  GPIOD_OUT_LOW);
-	if (IS_ERR(scodec->gpio_pa)) {
-		ret = PTR_ERR(scodec->gpio_pa);
-		dev_err_probe(&pdev->dev, ret, "Failed to get pa gpio\n");
-		return ret;
-	}
+	if (IS_ERR(scodec->gpio_pa))
+		return dev_err_probe(&pdev->dev, PTR_ERR(scodec->gpio_pa),
+				     "Failed to get pa gpio\n");
+
 
 	scodec->gpio_hp = devm_gpiod_get_optional(&pdev->dev, "hp-det", GPIOD_IN);
-	if (IS_ERR(scodec->gpio_hp)) {
-		ret = PTR_ERR(scodec->gpio_hp);
-		dev_err_probe(&pdev->dev, ret, "Failed to get hp-det gpio\n");
-		return ret;
-	}
+	if (IS_ERR(scodec->gpio_hp))
+		return dev_err_probe(&pdev->dev, PTR_ERR(scodec->gpio_hp),
+				     "Failed to get hp-det gpio\n");
 
 	/* reg_field setup */
 	scodec->reg_adc_fifoc = devm_regmap_field_alloc(&pdev->dev,
 							scodec->regmap,
 							quirks->reg_adc_fifoc);
-	if (IS_ERR(scodec->reg_adc_fifoc)) {
-		ret = PTR_ERR(scodec->reg_adc_fifoc);
-		dev_err(&pdev->dev, "Failed to create regmap fields: %d\n",
-			ret);
-		return ret;
-	}
+	if (IS_ERR(scodec->reg_adc_fifoc))
+		return dev_err_probe(&pdev->dev, PTR_ERR(scodec->reg_adc_fifoc),
+				     "Failed to create regmap fields\n");
 
 	scodec->reg_dac_fifoc = devm_regmap_field_alloc(&pdev->dev,
 							scodec->regmap,
 							quirks->reg_dac_fifoc);
-	if (IS_ERR(scodec->reg_dac_fifoc)) {
-		ret = PTR_ERR(scodec->reg_dac_fifoc);
-		dev_err(&pdev->dev, "Failed to create regmap fields: %d\n",
-			ret);
-		return ret;
-	}
+	if (IS_ERR(scodec->reg_dac_fifoc))
+		return dev_err_probe(&pdev->dev, PTR_ERR(scodec->reg_dac_fifoc),
+				     "Failed to create regmap fields\n");
 
 	/* DMA configuration for TX FIFO */
 	scodec->playback_dma_data.addr = res->start + quirks->reg_dac_txdata;
@@ -2422,10 +2409,9 @@ static int sun4i_codec_probe(struct platform_device *pdev)
 	snd_soc_card_set_drvdata(card, scodec);
 
 	ret = snd_soc_register_card(card);
-	if (ret) {
-		dev_err_probe(&pdev->dev, ret, "Failed to register our card\n");
-		return ret;
-	}
+	if (ret)
+		return dev_err_probe(&pdev->dev, ret,
+				     "Failed to register our card\n");
 
 	return 0;
 }
Signature · 1 line
2.43.0
#3 lore raw

PATCH 2/6 ASoC: sunxi: sun4i-codec: Drop redundant error messages

In reply to [email protected]

From: bui duc phuc <[email protected]>

The called functions already log failures where appropriate. Return the original error directly and avoid duplicate error messages.

---
 sound/soc/sunxi/sun4i-codec.c | 19 +++++--------------
 1 file changed, 5 insertions(+), 14 deletions(-)
sound/soc/sunxi/sun4i-codec.c +5 -14
index 05308df3ae5b..71f7a1fedd88 100644
@@ -2380,31 +2380,22 @@ static int sun4i_codec_probe(struct platform_device *pdev)
 
 	ret = devm_snd_soc_register_component(&pdev->dev, quirks->codec,
 				     &sun4i_codec_dai, 1);
-	if (ret) {
-		dev_err(&pdev->dev, "Failed to register our codec\n");
+	if (ret)
 		return ret;
-	}
 
 	ret = devm_snd_soc_register_component(&pdev->dev,
 					      &sun4i_codec_component,
 					      &dummy_cpu_dai, 1);
-	if (ret) {
-		dev_err(&pdev->dev, "Failed to register our DAI\n");
+	if (ret)
 		return ret;
-	}
 
 	ret = devm_snd_dmaengine_pcm_register(&pdev->dev, NULL, 0);
-	if (ret) {
-		dev_err(&pdev->dev, "Failed to register against DMAEngine\n");
+	if (ret)
 		return ret;
-	}
 
 	card = quirks->create_card(&pdev->dev);
-	if (IS_ERR(card)) {
-		ret = PTR_ERR(card);
-		dev_err(&pdev->dev, "Failed to create our card\n");
-		return ret;
-	}
+	if (IS_ERR(card))
+		return PTR_ERR(card);
 
 	snd_soc_card_set_drvdata(card, scodec);
 
Signature · 1 line
2.43.0
maintainer
#4 lore raw

Re: [PATCH 2/6] ASoC: sunxi: sun4i-codec: Drop redundant error messages

Quoted 25 lines · On Wed, Jul 15, 2026 at 5:56 PM <[email protected]> wrote:

From: bui duc phuc <[email protected]>

The called functions already log failures where appropriate. Return the original error directly and avoid duplicate error messages.

---
 sound/soc/sunxi/sun4i-codec.c | 19 +++++--------------
 1 file changed, 5 insertions(+), 14 deletions(-)
sound/soc/sunxi/sun4i-codec.c +1 -3
index 05308df3ae5b..71f7a1fedd88 100644
@@ -2380,31 +2380,22 @@ static int sun4i_codec_probe(struct platform_device *pdev)
 
        ret = devm_snd_soc_register_component(&pdev->dev, quirks->codec,
                                     &sun4i_codec_dai, 1);
-       if (ret) {
-               dev_err(&pdev->dev, "Failed to register our codec\n");
+       if (ret)
                return ret;
-       }
 

sound/soc/sunxi/sun4i-codec.c static int sun4i_codec_probe(struct platform_device *pdev) · line 2392

Quoted 10 lines
sound/soc/sunxi/sun4i-codec.c +1 -3
        ret = devm_snd_soc_register_component(&pdev->dev,
                                              &sun4i_codec_component,
                                              &dummy_cpu_dai, 1);
-       if (ret) {
-               dev_err(&pdev->dev, "Failed to register our DAI\n");
+       if (ret)
                return ret;
-       }
 
        ret = devm_snd_dmaengine_pcm_register(&pdev->dev, NULL, 0);

snd_dmaengine_pcm_register() doesn't seem to print an error when dma_request_chan() fails.

Quoted 20 lines
sound/soc/sunxi/sun4i-codec.c +3 -9
-       if (ret) {
-               dev_err(&pdev->dev, "Failed to register against DMAEngine\n");
+       if (ret)
                return ret;
-       }
 
        card = quirks->create_card(&pdev->dev);
-       if (IS_ERR(card)) {
-               ret = PTR_ERR(card);
-               dev_err(&pdev->dev, "Failed to create our card\n");
-               return ret;
-       }
+       if (IS_ERR(card))
+               return PTR_ERR(card);
 
        snd_soc_card_set_drvdata(card, scodec);
 
--

2.43.0

#5 lore raw

Re: [PATCH 2/6] ASoC: sunxi: sun4i-codec: Drop redundant error messages

Hi Chen-Yu Tsai,

Thank you for your review.

Quoted 11 lines
Quoted 1 line
        ret = devm_snd_dmaengine_pcm_register(&pdev->dev, NULL, 0);

snd_dmaengine_pcm_register() doesn't seem to print an error when dma_request_chan() fails.

Quoted 6 lines
sound/soc/sunxi/sun4i-codec.c +1 -3
-       if (ret) {
-               dev_err(&pdev->dev, "Failed to register against DMAEngine\n");
+       if (ret)
                return ret;
-       }

You are right that dma_request_chan() itself has several code paths where it doesn't print any error logs when it fails.
However, if we look at how the caller handles the return value of dma_request_chan():

---------------------------------
chan = dma_request_chan(dev, name);

if (IS_ERR(chan)) {
                /*
                * Only report probe deferral errors, channels
                * might not be present for devices that
                * support only TX or only RX.
                */
                if (PTR_ERR(chan) == -EPROBE_DEFER)
                        return -EPROBE_DEFER;
                pcm->chan[i] = NULL;
} else {
                pcm->chan[i] = chan;
}

---------------------------------------

As shown here, the code only propagates a single error code, -EPROBE_DEFER regardless of whatever other errors might have occurred. The reasoning behind this is already well-documented in the comment block above.

Therefore, keeping the following error log is not particularly useful:

----------------------
ret = devm_snd_dmaengine_pcm_register(&pdev->dev, NULL, 0);

if (ret) {
        dev_err(&pdev->dev, "Failed to register against DMAEngine\n");
        return ret;
}

-----------------------

This logging statement does not make much sense here because if the returned error is -EPROBE_DEFER , we should definitely avoid printing error messages to the kernel log.

Let me know if this makes sense to you, or if you'd still prefer to keep the log with a check to avoid printing on -EPROBE_DEFER.

Best regards,
Phuc

#6 lore raw

Re: [PATCH 2/6] ASoC: sunxi: sun4i-codec: Drop redundant error messages

Hi all,

Actually, following our discussion about dma_request_chan() not always printing error logs internally, I did some further investigation into the code paths and have submitted two patches to address the underlying issues more comprehensively:

1. A patch for dma_request_chan() itself to prevent potential NULL pointer dereferences on invalid arguments:
https://lore.kernel.org/all/[email protected]/

2. A patch to improve the error handling flow inside dmaengine_pcm_request_chan_of() when calling dma_request_chan():
https://lore.kernel.org/all/[email protected]/

I wanted to share this here to provide more context on the proposed changes to these DMA engine error-handling flows.

Best regards,
Phuc

#7 lore raw

PATCH 3/6 ASoC: sunxi: sun4i-i2s: Use dev_err_probe() for probe error handling

In reply to [email protected]

From: bui duc phuc <[email protected]>

Use dev_err_probe() for probe error handling to simplify the error paths and handle -EPROBE_DEFER correctly.

---
 sound/soc/sunxi/sun4i-i2s.c | 28 ++++++++++++----------------
 1 file changed, 12 insertions(+), 16 deletions(-)
sound/soc/sunxi/sun4i-i2s.c +12 -16
index 40de99a34bc3..716fa4d872ff 100644
@@ -1550,30 +1550,26 @@ static int sun4i_i2s_probe(struct platform_device *pdev)
 	}
 
 	i2s->bus_clk = devm_clk_get(&pdev->dev, "apb");
-	if (IS_ERR(i2s->bus_clk)) {
-		dev_err(&pdev->dev, "Can't get our bus clock\n");
-		return PTR_ERR(i2s->bus_clk);
-	}
+	if (IS_ERR(i2s->bus_clk))
+		return dev_err_probe(&pdev->dev, PTR_ERR(i2s->bus_clk),
+				     "Can't get our bus clock\n");
 
 	i2s->regmap = devm_regmap_init_mmio(&pdev->dev, regs,
 					    i2s->variant->sun4i_i2s_regmap);
-	if (IS_ERR(i2s->regmap)) {
-		dev_err(&pdev->dev, "Regmap initialisation failed\n");
-		return PTR_ERR(i2s->regmap);
-	}
+	if (IS_ERR(i2s->regmap))
+		return dev_err_probe(&pdev->dev, PTR_ERR(i2s->regmap),
+				     "Regmap initialisation failed\n");
 
 	i2s->mod_clk = devm_clk_get(&pdev->dev, "mod");
-	if (IS_ERR(i2s->mod_clk)) {
-		dev_err(&pdev->dev, "Can't get our mod clock\n");
-		return PTR_ERR(i2s->mod_clk);
-	}
+	if (IS_ERR(i2s->mod_clk))
+		return dev_err_probe(&pdev->dev, PTR_ERR(i2s->mod_clk),
+				     "Can't get our mod clock\n");
 
 	if (i2s->variant->has_reset) {
 		i2s->rst = devm_reset_control_get_exclusive(&pdev->dev, NULL);
-		if (IS_ERR(i2s->rst)) {
-			dev_err(&pdev->dev, "Failed to get reset control\n");
-			return PTR_ERR(i2s->rst);
-		}
+		if (IS_ERR(i2s->rst))
+			return dev_err_probe(&pdev->dev, PTR_ERR(i2s->rst),
+					     "Failed to get reset control\n");
 	}
 
 	if (!IS_ERR(i2s->rst)) {
Signature · 1 line
2.43.0
#9 lore raw

PATCH 4/6 ASoC: sunxi: sun4i-spdif: Use dev_err_probe() for probe error handling

In reply to [email protected]

From: bui duc phuc <[email protected]>

Use dev_err_probe() for probe error handling to simplify the error paths and handle -EPROBE_DEFER correctly.

---
 sound/soc/sunxi/sun4i-spdif.c | 23 ++++++++++-------------
 1 file changed, 10 insertions(+), 13 deletions(-)
sound/soc/sunxi/sun4i-spdif.c +10 -13
index c2ec19437cd7..d979bb00312f 100644
@@ -684,26 +684,23 @@ static int sun4i_spdif_probe(struct platform_device *pdev)
 
 	host->regmap = devm_regmap_init_mmio(&pdev->dev, base,
 						&sun4i_spdif_regmap_config);
-	if (IS_ERR(host->regmap)) {
-		dev_err(&pdev->dev, "failed to initialise regmap.\n");
-		return PTR_ERR(host->regmap);
-	}
+	if (IS_ERR(host->regmap))
+		return dev_err_probe(&pdev->dev, PTR_ERR(host->regmap),
+				     "failed to initialise regmap.\n");
 
 	/* Clocks */
 	host->apb_clk = devm_clk_get(&pdev->dev, "apb");
-	if (IS_ERR(host->apb_clk)) {
-		dev_err(&pdev->dev, "failed to get a apb clock.\n");
-		return PTR_ERR(host->apb_clk);
-	}
+	if (IS_ERR(host->apb_clk))
+		return dev_err_probe(&pdev->dev, PTR_ERR(host->apb_clk),
+				     "failed to get a apb clock.\n");
 
 	if (quirks->tx_clk_name)
 		tx_clk_name = quirks->tx_clk_name;
 	host->spdif_clk = devm_clk_get(&pdev->dev, tx_clk_name);
-	if (IS_ERR(host->spdif_clk)) {
-		dev_err(&pdev->dev, "failed to get the \"%s\" clock.\n",
-			tx_clk_name);
-		return PTR_ERR(host->spdif_clk);
-	}
+	if (IS_ERR(host->spdif_clk))
+		return dev_err_probe(&pdev->dev, PTR_ERR(host->spdif_clk),
+				     "failed to get the \"%s\" clock.\n",
+				     tx_clk_name);
 
 	host->dma_params_tx.addr = res->start + quirks->reg_dac_txdata;
 	host->dma_params_tx.maxburst = 8;
Signature · 1 line
2.43.0
#11 lore raw

PATCH 5/6 ASoC: sunxi: sun50i-codec-analog: Improve probe error handling

In reply to [email protected]

From: bui duc phuc <[email protected]>

Drop the redundant error message after devm_platform_ioremap_resource(), which already reports failures, and use dev_err_probe() for regmap initialization errors.

---
 sound/soc/sunxi/sun50i-codec-analog.c | 11 ++++-------
 1 file changed, 4 insertions(+), 7 deletions(-)
sound/soc/sunxi/sun50i-codec-analog.c +4 -7
index 9f5b067a8ccc..50c0dee8c433 100644
@@ -551,16 +551,13 @@ static int sun50i_codec_analog_probe(struct platform_device *pdev)
 	bool enable;
 
 	base = devm_platform_ioremap_resource(pdev, 0);
-	if (IS_ERR(base)) {
-		dev_err(&pdev->dev, "Failed to map the registers\n");
+	if (IS_ERR(base))
 		return PTR_ERR(base);
-	}
 
 	regmap = sun8i_adda_pr_regmap_init(&pdev->dev, base);
-	if (IS_ERR(regmap)) {
-		dev_err(&pdev->dev, "Failed to create regmap\n");
-		return PTR_ERR(regmap);
-	}
+	if (IS_ERR(regmap))
+		return dev_err_probe(&pdev->dev, PTR_ERR(regmap),
+				     "Failed to create regmap\n");
 
 	enable = device_property_read_bool(&pdev->dev,
 					   "allwinner,internal-bias-resistor");
Signature · 1 line
2.43.0
maintainer Reviewed-by on v1 5/6
#12 lore raw

Re: [PATCH 5/6] ASoC: sunxi: sun50i-codec-analog: Improve probe error handling

Quoted 8 lines · On Wed, Jul 15, 2026 at 5:56 PM <[email protected]> wrote:

From: bui duc phuc <[email protected]>

Drop the redundant error message after devm_platform_ioremap_resource(), which already reports failures, and use dev_err_probe() for regmap initialization errors.

#13 lore raw

PATCH 6/6 ASoC: sunxi: sun8i-codec-analog: Improve probe error handling

In reply to [email protected]

From: bui duc phuc <[email protected]>

Drop the redundant error message after devm_platform_ioremap_resource(), which already reports failures, and use dev_err_probe() for regmap initialization errors.

---
 sound/soc/sunxi/sun8i-codec-analog.c | 11 ++++-------
 1 file changed, 4 insertions(+), 7 deletions(-)
sound/soc/sunxi/sun8i-codec-analog.c +4 -7
index 2024e2b2553e..3335855c6311 100644
@@ -822,16 +822,13 @@ static int sun8i_codec_analog_probe(struct platform_device *pdev)
 	void __iomem *base;
 
 	base = devm_platform_ioremap_resource(pdev, 0);
-	if (IS_ERR(base)) {
-		dev_err(&pdev->dev, "Failed to map the registers\n");
+	if (IS_ERR(base))
 		return PTR_ERR(base);
-	}
 
 	regmap = sun8i_adda_pr_regmap_init(&pdev->dev, base);
-	if (IS_ERR(regmap)) {
-		dev_err(&pdev->dev, "Failed to create regmap\n");
-		return PTR_ERR(regmap);
-	}
+	if (IS_ERR(regmap))
+		return dev_err_probe(&pdev->dev, PTR_ERR(regmap),
+				     "Failed to create regmap\n");
 
 	return devm_snd_soc_register_component(&pdev->dev,
 					       &sun8i_codec_analog_cmpnt_drv,
Signature · 1 line
2.43.0
maintainer Reviewed-by on v1 6/6
#14 lore raw

Re: [PATCH 6/6] ASoC: sunxi: sun8i-codec-analog: Improve probe error handling

Quoted 8 lines · On Wed, Jul 15, 2026 at 5:56 PM <[email protected]> wrote:

From: bui duc phuc <[email protected]>

Drop the redundant error message after devm_platform_ioremap_resource(), which already reports failures, and use dev_err_probe() for regmap initialization errors.

maintainer
#15 lore raw
In reply to [email protected]
Quoted 6 lines · On Wed, 15 Jul 2026 16:55:19 +0700, [email protected] wrote:

ASoC: sunxi: Simplify error handling

From: bui duc phuc <[email protected]>

Hi all,

Quoted 7 lines

This series improves probe error handling in the sunxi ASoC drivers. It replaces suitable probe error paths with dev_err_probe() to simplify the code and handle deferred probe errors consistently. It also removes redundant error messages where the called helpers already report failures, avoiding duplicate log messages.

[...]

Applied to

https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git for-7.3

Thanks!

[1/6] ASoC: sunxi: sun4i-codec: Use dev_err_probe() for probe error handling

      https://git.kernel.org/broonie/sound/c/a8023598f3ae
[2/6] ASoC: sunxi: sun4i-codec: Drop redundant error messages
      https://git.kernel.org/broonie/sound/c/de6bda2088e4
[3/6] ASoC: sunxi: sun4i-i2s: Use dev_err_probe() for probe error handling
      https://git.kernel.org/broonie/sound/c/3e2262df8460
[4/6] ASoC: sunxi: sun4i-spdif: Use dev_err_probe() for probe error handling
      https://git.kernel.org/broonie/sound/c/ac95bdb98246
[5/6] ASoC: sunxi: sun50i-codec-analog: Improve probe error handling
      https://git.kernel.org/broonie/sound/c/76a770c30bcd
[6/6] ASoC: sunxi: sun8i-codec-analog: Improve probe error handling
      https://git.kernel.org/broonie/sound/c/bb0d825c8ad9

All being well this means that it will be integrated into the linux-next tree (usually sometime in the next 24 hours) and sent to Linus during the next merge window (or sooner if it is a bug fix), however if problems are discovered then the patch may be dropped or reverted.

You may get further e-mails resulting from automated or manual testing and review of the tree, please engage with people reporting problems and send followup patches addressing any issues that are reported if needed.

If any updates are required or you are submitting further changes they should be sent as incremental updates against current git, existing patches will not be replaced.

Please add any relevant lists and maintainers to the CCs when replying to this mail.

Thanks,
Mark