arm64: dts: ti: k3-am68-phyboard-izar: Add pwm fan
Subsystems (2)
PATCH 1/1 arm64: dts: ti: k3-am68-phyboard-izar: Add pwm fan
Add an overlay to control the pwm fan[0] that comes with the kit.
[0] https://www.sepa-europe.com/en/2023/06/16/axial-fan-lf40p/
--- arch/arm64/boot/dts/ti/Makefile | 6 +- .../dts/ti/k3-am68-phyboard-izar-pwm-fan.dtso | 74 +++++++++++++++++++ 2 files changed, 79 insertions(+), 1 deletion(-) create mode 100644 arch/arm64/boot/dts/ti/k3-am68-phyboard-izar-pwm-fan.dtso
arch/arm64/boot/dts/ti/Makefile +5 -1
@@ -173,7 +173,10 @@ k3-am68-phyboard-izar-lvds-ph128800t006-dtbs := k3-am68-phyboard-izar.dtb \ k3-am68-phyboard-izar-lvds-ph128800t006.dtbo dtb-$(CONFIG_ARCH_K3) += k3-am68-phyboard-izar-peb-av-15.dtb k3-am68-phyboard-izar-peb-av-15-dtbs := k3-am68-phyboard-izar.dtb \ - k3-am68-phyboard-izar-peb-av-15.dtbo + k3-am68-phyboard-izar-peb-av-15.dtbo +dtb-$(CONFIG_ARCH_K3) += k3-am68-phyboard-izar-pwm-fan.dtb +k3-am68-phyboard-izar-pwm-fan-dtbs := k3-am68-phyboard-izar.dtb \ + k3-am68-phyboard-izar-pwm-fan.dtbo dtb-$(CONFIG_ARCH_K3) += k3-am68-sk-base-board.dtb dtb-$(CONFIG_ARCH_K3) += k3-am68-sk-base-board-pcie1-ep.dtbo dtb-$(CONFIG_ARCH_K3) += k3-j721s2-common-proc-board.dtb
@@ -387,6 +390,7 @@ dtb- += k3-am625-beagleplay-csi2-ov5640.dtb \ k3-am642-tqma64xxl-mbax4xxl-wlan.dtb \ k3-am68-phyboard-izar-lvds-ph128800t006.dtb \ k3-am68-phyboard-izar-peb-av-15.dtb \ + k3-am68-phyboard-izar-pwm-fan.dtb \ k3-am68-sk-base-board-csi2-dual-imx219.dtb \ k3-am68-sk-base-board-pcie1-ep.dtb \ k3-am69-sk-csi2-dual-imx219.dtb \
arch/arm64/boot/dts/ti/k3-am68-phyboard-izar-pwm-fan.dtso new file +74 -0
74 lines not on this page · raw message
Signature · 1 line
2.43.0
Hi Dominik Haller,
Quoted 1 line · Dominik Haller
arm64: dts: ti: k3-am68-phyboard-izar: Add pwm fan
I have applied the following to branch ti-k3-dts-next on [1]. Thank you!
[1/1] arm64: dts: ti: k3-am68-phyboard-izar: Add pwm fan
commit: 37bdaf74ae9ff339ace4c8b06e88fda9432edb5b
All being well this means that it will be integrated into the linux-next tree (usually sometime in the next 24 hours) and sent up the chain during the next merge window (or sooner if it is a relevant bug fix), however if problems are discovered then the patch may be dropped or reverted.
You may get further e-mails resulting from automated or manual testing and review of the tree, please engage with people reporting problems and send followup patches addressing any issues that are reported if needed.
If any updates are required or you are submitting further changes they should be sent as incremental updates against current git, existing patches will not be replaced.
Please add any relevant lists and maintainers to the CCs when replying to this mail.
[1] https://git.kernel.org/pub/scm/linux/kernel/git/ti/linux.git
--
Vignesh