Skip to contentSkip to conversation

FAILED: patch "[PATCH] Input: mms114 - fix touch indexing for MMS134S and MMS136" failed to apply to 5.15-stable tree

PATCH New [email protected] 2 participants 2 messages Jul 16 – Jul 22

Subsystems (2)
lore
Share & tools
lore

[email protected]

author maintainer
#0 lore raw

The patch below does not apply to the 5.15-stable tree.
If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <[email protected]>.

To reproduce the conflict and resubmit, you may use the following commands:

git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-5.15.y
git checkout FETCH_HEAD
git cherry-pick -x a6ac4e24c1a8a533bb61035184fdcc7eede4cc8d
# <resolve conflicts, build, test, etc.>
git commit -s
git send-email --to '<[email protected]>' --in-reply-to '2026071610-maximum-nuttiness-8da1@gregkh' --subject-prefix 'PATCH 5.15.y' 'HEAD^..'

Possible dependencies:

thanks,

greg k-h

------------------ original commit in Linus's tree ------------------

From a6ac4e24c1a8a533bb61035184fdcc7eede4cc8d Mon Sep 17 00:00:00 2001
From: Dmitry Torokhov <[email protected]>
Date: Mon, 22 Jun 2026 22:35:18 -0700
Subject: [PATCH] Input: mms114 - fix touch indexing for MMS134S and MMS136

The MMS134S and MMS136 touch controllers have an event size of 6 bytes rather than 8 bytes. When __mms114_read_reg() reads the touch data packet from the device into the touch buffer, the events are packed tightly at 6-byte intervals. However, the driver iterates through the events using standard C array indexing (touch[index]), where each element is sizeof(struct mms114_touch) (8 bytes) apart. As a result, any touch events beyond the first one are read from incorrect offsets and parsed improperly.

Fix this by explicitly calculating the byte offset for each touch event based on the device's specific event size.

Fixes 53fefdd1d3a3 ("Input: mms114 - support MMS136")
Fixes ab108678195f ("Input: mms114 - support MMS134S")
Reported-by [email protected]
Assisted-by Antigravity:gemini-3.5-flash
drivers/input/touchscreen/mms114.c +12 -6
index 4d748a13408d..53ad35d61d47 100644
@@ -217,7 +217,9 @@ static irqreturn_t mms114_interrupt(int irq, void *dev_id)
 	struct mms114_data *data = dev_id;
 	struct i2c_client *client = data->client;
 	struct mms114_touch touch[MMS114_MAX_TOUCH];
+	struct mms114_touch *t;
 	int packet_size;
+	int event_size;
 	int touch_size;
 	int index;
 	int error;
@@ -234,9 +236,11 @@ static irqreturn_t mms114_interrupt(int irq, void *dev_id)
 
 	/* MMS136 has slightly different event size */
 	if (data->type == TYPE_MMS134S || data->type == TYPE_MMS136)
-		touch_size = packet_size / MMS136_EVENT_SIZE;
+		event_size = MMS136_EVENT_SIZE;
 	else
-		touch_size = packet_size / MMS114_EVENT_SIZE;
+		event_size = MMS114_EVENT_SIZE;
+
+	touch_size = packet_size / event_size;
 
 	error = __mms114_read_reg(data, MMS114_INFORMATION, packet_size,
 			(u8 *)touch);
@@ -244,18 +248,20 @@ static irqreturn_t mms114_interrupt(int irq, void *dev_id)
 		goto out;
 
 	for (index = 0; index < touch_size; index++) {
-		switch (touch[index].type) {
+		t = (struct mms114_touch *)((u8 *)touch + index * event_size);
+
+		switch (t->type) {
 		case MMS114_TYPE_TOUCHSCREEN:
-			mms114_process_mt(data, touch + index);
+			mms114_process_mt(data, t);
 			break;
 
 		case MMS114_TYPE_TOUCHKEY:
-			mms114_process_touchkey(data, touch + index);
+			mms114_process_touchkey(data, t);
 			break;
 
 		default:
 			dev_err(&client->dev, "Wrong touch type (%d)\n",
-				touch[index].type);
+				t->type);
 			break;
 		}
 	}
maintainer
#1 lore raw

PATCH 1/1 Input: mms114 - fix touch indexing for MMS134S and MMS136

From: Dmitry Torokhov <[email protected]>

[ Upstream commit a6ac4e24c1a8a533bb61035184fdcc7eede4cc8d ]

The MMS134S and MMS136 touch controllers have an event size of 6 bytes rather than 8 bytes. When __mms114_read_reg() reads the touch data packet from the device into the touch buffer, the events are packed tightly at 6-byte intervals. However, the driver iterates through the events using standard C array indexing (touch[index]), where each element is sizeof(struct mms114_touch) (8 bytes) apart. As a result, any touch events beyond the first one are read from incorrect offsets and parsed improperly.

Fix this by explicitly calculating the byte offset for each touch event based on the device's specific event size.

Fixes 53fefdd1d3a3 ("Input: mms114 - support MMS136")
Fixes ab108678195f ("Input: mms114 - support MMS134S")
Reported-by [email protected]
Assisted-by Antigravity:gemini-3.5-flash
---
 drivers/input/touchscreen/mms114.c | 15 +++++++++++----
 1 file changed, 11 insertions(+), 4 deletions(-)
drivers/input/touchscreen/mms114.c +11 -4
index 9fa3b0e421be2a..dac9fadaf87355 100644
@@ -196,7 +196,9 @@ static irqreturn_t mms114_interrupt(int irq, void *dev_id)
 	struct mms114_data *data = dev_id;
 	struct input_dev *input_dev = data->input_dev;
 	struct mms114_touch touch[MMS114_MAX_TOUCH];
+	struct mms114_touch *t;
 	int packet_size;
+	int event_size;
 	int touch_size;
 	int index;
 	int error;
@@ -214,17 +216,22 @@ static irqreturn_t mms114_interrupt(int irq, void *dev_id)
 
 	/* MMS136 has slightly different event size */
 	if (data->type == TYPE_MMS134S || data->type == TYPE_MMS136)
-		touch_size = packet_size / MMS136_EVENT_SIZE;
+		event_size = MMS136_EVENT_SIZE;
 	else
-		touch_size = packet_size / MMS114_EVENT_SIZE;
+		event_size = MMS114_EVENT_SIZE;
+
+	touch_size = packet_size / event_size;
 
 	error = __mms114_read_reg(data, MMS114_INFORMATION, packet_size,
 			(u8 *)touch);
 	if (error < 0)
 		goto out;
 
-	for (index = 0; index < touch_size; index++)
-		mms114_process_mt(data, touch + index);
+	for (index = 0; index < touch_size; index++) {
+		t = (struct mms114_touch *)((u8 *)touch + index * event_size);
+
+		mms114_process_mt(data, t);
+	}
 
 	input_mt_report_pointer_emulation(data->input_dev, true);
 	input_sync(data->input_dev);
Signature · 1 line
2.53.0