Skip to contentSkip to conversation

FAILED: patch "[PATCH] i2c: i801: fix hardware state machine corruption in error" failed to apply to 6.6-stable tree

PATCH New [email protected] 2 participants 2 messages Jul 16 – Jul 22

Subsystems (3)
lore
Share & tools
lore

[email protected]

author maintainer
#0 lore raw

The patch below does not apply to the 6.6-stable tree.
If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <[email protected]>.

To reproduce the conflict and resubmit, you may use the following commands:

git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-6.6.y
git checkout FETCH_HEAD
git cherry-pick -x 10dd1a736d557e310a77117832874729a0175d57
# <resolve conflicts, build, test, etc.>
git commit -s
git send-email --to '<[email protected]>' --in-reply-to '2026071643-unnoticed-jitters-56c2@gregkh' --subject-prefix 'PATCH 6.6.y' 'HEAD^..'

Possible dependencies:

thanks,

greg k-h

------------------ original commit in Linus's tree ------------------

From 10dd1a736d557e310a77117832874729a0175d57 Mon Sep 17 00:00:00 2001
From: Mingyu Wang <[email protected]>
Date: Tue, 12 May 2026 17:35:34 +0800
Subject: [PATCH] i2c: i801: fix hardware state machine corruption in error
path

A severe livelock and subsequent Hung Task panic were observed in the i2c-i801 driver during concurrent Fuzzing. The crash is caused by an unconditional hardware register cleanup in the error handling path of i801_access().

When i801_check_pre() fails (e.g., returning -EBUSY because the SMBus controller is actively used by BIOS/ACPI), the kernel does not actually acquire the hardware ownership. However, the code jumps to the 'out' label and executes:

    iowrite8(SMBHSTSTS_INUSE_STS | STATUS_FLAGS, SMBHSTSTS(priv));

This forcefully clears the INUSE_STS lock and resets the hardware status flags without owning the controller. Doing so interrupts ongoing BIOS/ACPI transactions and totally corrupts the SMBus hardware state machine.

Consequently, all subsequent i801_access() calls fail at the pre-check stage, triggering an endless stream of "SMBus is busy, can't use it!" error logs. Over a slow serial console, this printk flood monopolizes the CPU (Console Livelock), starving other processes trying to acquire the mmap_lock down_read semaphore, ultimately triggering the hung task watchdog.

Fix this by moving the 'out' label below the hardware register cleanup. If i801_check_pre() fails, we safely bypass the iowrite8() and only release the software locks (pm_runtime and mutex), strictly adhering to the rule of not releasing resources that were never acquired.

Fixes 1f760b87e54c ("i2c: i801: Call i801_check_pre() from i801_access()")
Cc <[email protected]> # v6.3+
drivers/i2c/busses/i2c-i801.c +1 -1
index 32a3cef02c7b..b29c99ed3883 100644
@@ -931,13 +931,13 @@ static s32 i801_access(struct i2c_adapter *adap, u16 addr,
 	 */
 	if (hwpec)
 		iowrite8(ioread8(SMBAUXCTL(priv)) & ~SMBAUXCTL_CRC, SMBAUXCTL(priv));
-out:
 	/*
 	 * Unlock the SMBus device for use by BIOS/ACPI,
 	 * and clear status flags if not done already.
 	 */
 	iowrite8(SMBHSTSTS_INUSE_STS | STATUS_FLAGS, SMBHSTSTS(priv));
 
+out:
 	pm_runtime_put_autosuspend(&priv->pci_dev->dev);
 	mutex_unlock(&priv->acpi_lock);
 	return ret;
maintainer
#1 lore raw

PATCH 1/1 i2c: i801: fix hardware state machine corruption in error path

From: Mingyu Wang <[email protected]>

[ Upstream commit 10dd1a736d557e310a77117832874729a0175d57 ]

A severe livelock and subsequent Hung Task panic were observed in the i2c-i801 driver during concurrent Fuzzing. The crash is caused by an unconditional hardware register cleanup in the error handling path of i801_access().

When i801_check_pre() fails (e.g., returning -EBUSY because the SMBus controller is actively used by BIOS/ACPI), the kernel does not actually acquire the hardware ownership. However, the code jumps to the 'out' label and executes:

    iowrite8(SMBHSTSTS_INUSE_STS | STATUS_FLAGS, SMBHSTSTS(priv));

This forcefully clears the INUSE_STS lock and resets the hardware status flags without owning the controller. Doing so interrupts ongoing BIOS/ACPI transactions and totally corrupts the SMBus hardware state machine.

Consequently, all subsequent i801_access() calls fail at the pre-check stage, triggering an endless stream of "SMBus is busy, can't use it!" error logs. Over a slow serial console, this printk flood monopolizes the CPU (Console Livelock), starving other processes trying to acquire the mmap_lock down_read semaphore, ultimately triggering the hung task watchdog.

Fix this by moving the 'out' label below the hardware register cleanup. If i801_check_pre() fails, we safely bypass the iowrite8() and only release the software locks (pm_runtime and mutex), strictly adhering to the rule of not releasing resources that were never acquired.

Fixes 1f760b87e54c ("i2c: i801: Call i801_check_pre() from i801_access()")
Cc <[email protected]> # v6.3+
---
 drivers/i2c/busses/i2c-i801.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/i2c/busses/i2c-i801.c +1 -1
index 89fdc75cdcfa54..b0429fa3f57349 100644
@@ -918,13 +918,13 @@ static s32 i801_access(struct i2c_adapter *adap, u16 addr,
 	 */
 	if (hwpec)
 		outb_p(inb_p(SMBAUXCTL(priv)) & ~SMBAUXCTL_CRC, SMBAUXCTL(priv));
-out:
 	/*
 	 * Unlock the SMBus device for use by BIOS/ACPI,
 	 * and clear status flags if not done already.
 	 */
 	outb_p(SMBHSTSTS_INUSE_STS | STATUS_FLAGS, SMBHSTSTS(priv));
 
+out:
 	pm_runtime_mark_last_busy(&priv->pci_dev->dev);
 	pm_runtime_put_autosuspend(&priv->pci_dev->dev);
 	mutex_unlock(&priv->acpi_lock);
Signature · 1 line
2.53.0