Skip to contentSkip to conversation

FAILED: patch "[PATCH] HID: appleir: fix UAF on pending key_up_timer in remove()" failed to apply to 5.10-stable tree

PATCH New [email protected] 2 participants 2 messages Jul 14 – Jul 18

Subsystems (2)
lore
Share & tools
lore

[email protected]

author maintainer
#0 lore raw

The patch below does not apply to the 5.10-stable tree.
If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <[email protected]>.

To reproduce the conflict and resubmit, you may use the following commands:

git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-5.10.y
git checkout FETCH_HEAD
git cherry-pick -x 75fe87e19d8aff81eb2c64d15d244ab8da4de945
# <resolve conflicts, build, test, etc.>
git commit -s
git send-email --to '<[email protected]>' --in-reply-to '2026071431-undefined-extenuate-7534@gregkh' --subject-prefix 'PATCH 5.10.y' 'HEAD^..'

Possible dependencies:

thanks,

greg k-h

------------------ original commit in Linus's tree ------------------

From 75fe87e19d8aff81eb2c64d15d244ab8da4de945 Mon Sep 17 00:00:00 2001
From: Manish Khadka <[email protected]>
Date: Fri, 15 May 2026 23:17:52 +0545
Subject: [PATCH] HID: appleir: fix UAF on pending key_up_timer in remove()

appleir_remove() runs hid_hw_stop() before timer_delete_sync(). hid_hw_stop() synchronously unregisters the HID input device via hid_disconnect() -> hidinput_disconnect() -> input_unregister_device(), which drops the last reference and frees the underlying input_dev when no userspace handle holds it open.

key_up_tick() reads appleir->input_dev and calls input_report_key() / input_sync() on it. The timer is armed from appleir_raw_event() with a HZ/8 (~125 ms) timeout on every keydown and key-repeat report. If a key was pressed shortly before the device is disconnected, the timer can fire after hid_hw_stop() has freed input_dev but before the teardown drains it.

A simple reorder is not sufficient. Putting the timer drain first still leaves a window where a USB URB completion (raw_event) running during hid_hw_stop() can call mod_timer() and re-arm the timer, which then fires after hidinput_disconnect() has freed input_dev. The same URB-completion window also lets raw_event() reach key_up(), key_down() and battery_flat() directly, all of which dereference appleir->input_dev.

Introduce a 'removing' flag on struct appleir, gated by the existing spinlock. appleir_remove() sets the flag under the lock and then shuts down the timer with timer_shutdown_sync(), which both drains any in-flight callback and permanently disables further mod_timer() calls. appleir_raw_event() and key_up_tick() bail out early if the flag is set, so no path can arm or run the timer, or dereference appleir->input_dev, after remove() has started tearing down.

The keyrepeat and flatbattery branches of appleir_raw_event() previously called into the input layer without holding the spinlock; take it now so the flag check is well-defined. This incidentally closes a pre-existing read-side race on appleir->current_key in the keyrepeat branch.

This bug is structurally a sibling of commit 4db2af929279 ("HID:
appletb-kbd: fix UAF in inactivity-timer cleanup path") and has been present since the driver was introduced.

Fixes 9a4a5574ce42 ("HID: appleir: add support for Apple ir devices")
drivers/hid/hid-appleir.c +35 -10
index 5e8ced7bc05a..adaa44a858ed 100644
@@ -109,9 +109,10 @@ struct appleir {
 	struct hid_device *hid;
 	unsigned short keymap[ARRAY_SIZE(appleir_key_table)];
 	struct timer_list key_up_timer;	/* timer for key up */
-	spinlock_t lock;		/* protects .current_key */
+	spinlock_t lock;		/* protects .current_key, .removing */
 	int current_key;		/* the currently pressed key */
 	int prev_key_idx;		/* key index in a 2 packets message */
+	bool removing;			/* set during teardown; gates input_dev access */
 };
 
 static int get_key(int data)
@@ -172,7 +173,7 @@ static void key_up_tick(struct timer_list *t)
 	unsigned long flags;
 
 	spin_lock_irqsave(&appleir->lock, flags);
-	if (appleir->current_key) {
+	if (!appleir->removing && appleir->current_key) {
 		key_up(hid, appleir, appleir->current_key);
 		appleir->current_key = 0;
 	}
@@ -195,6 +196,10 @@ static int appleir_raw_event(struct hid_device *hid, struct hid_report *report,
 		int index;
 
 		spin_lock_irqsave(&appleir->lock, flags);
+		if (appleir->removing) {
+			spin_unlock_irqrestore(&appleir->lock, flags);
+			goto out;
+		}
 		/*
 		 * If we already have a key down, take it up before marking
 		 * this one down
@@ -229,17 +234,25 @@ static int appleir_raw_event(struct hid_device *hid, struct hid_report *report,
 	appleir->prev_key_idx = 0;
 
 	if (!memcmp(data, keyrepeat, sizeof(keyrepeat))) {
-		key_down(hid, appleir, appleir->current_key);
-		/*
-		 * Remote doesn't do key up, either pull them up, in the test
-		 * above, or here set a timer which pulls them up after 1/8 s
-		 */
-		mod_timer(&appleir->key_up_timer, jiffies + HZ / 8);
+		spin_lock_irqsave(&appleir->lock, flags);
+		if (!appleir->removing) {
+			key_down(hid, appleir, appleir->current_key);
+			/*
+			 * Remote doesn't do key up, either pull them up, in
+			 * the test above, or here set a timer which pulls them
+			 * up after 1/8 s
+			 */
+			mod_timer(&appleir->key_up_timer, jiffies + HZ / 8);
+		}
+		spin_unlock_irqrestore(&appleir->lock, flags);
 		goto out;
 	}
 
 	if (!memcmp(data, flatbattery, sizeof(flatbattery))) {
-		battery_flat(appleir);
+		spin_lock_irqsave(&appleir->lock, flags);
+		if (!appleir->removing)
+			battery_flat(appleir);
+		spin_unlock_irqrestore(&appleir->lock, flags);
 		/* Fall through */
 	}
 
@@ -318,8 +331,20 @@ static int appleir_probe(struct hid_device *hid, const struct hid_device_id *id)
 static void appleir_remove(struct hid_device *hid)
 {
 	struct appleir *appleir = hid_get_drvdata(hid);
+	unsigned long flags;
+
+	/*
+	 * Mark the driver as tearing down so that any concurrent raw_event
+	 * (e.g. from a USB URB completion that hid_hw_stop() has not yet
+	 * killed) and the key_up_timer softirq stop touching input_dev
+	 * before hid_hw_stop() frees it via hidinput_disconnect().
+	 */
+	spin_lock_irqsave(&appleir->lock, flags);
+	appleir->removing = true;
+	spin_unlock_irqrestore(&appleir->lock, flags);
+
+	timer_shutdown_sync(&appleir->key_up_timer);
 	hid_hw_stop(hid);
-	timer_delete_sync(&appleir->key_up_timer);
 }
 
 static const struct hid_device_id appleir_devices[] = {
maintainer
#1 lore raw

PATCH 1/1 HID: appleir: fix UAF on pending key_up_timer in remove()

From: Manish Khadka <[email protected]>

[ Upstream commit 75fe87e19d8aff81eb2c64d15d244ab8da4de945 ]

appleir_remove() runs hid_hw_stop() before timer_delete_sync(). hid_hw_stop() synchronously unregisters the HID input device via hid_disconnect() -> hidinput_disconnect() -> input_unregister_device(), which drops the last reference and frees the underlying input_dev when no userspace handle holds it open.

key_up_tick() reads appleir->input_dev and calls input_report_key() / input_sync() on it. The timer is armed from appleir_raw_event() with a HZ/8 (~125 ms) timeout on every keydown and key-repeat report. If a key was pressed shortly before the device is disconnected, the timer can fire after hid_hw_stop() has freed input_dev but before the teardown drains it.

A simple reorder is not sufficient. Putting the timer drain first still leaves a window where a USB URB completion (raw_event) running during hid_hw_stop() can call mod_timer() and re-arm the timer, which then fires after hidinput_disconnect() has freed input_dev. The same URB-completion window also lets raw_event() reach key_up(), key_down() and battery_flat() directly, all of which dereference appleir->input_dev.

Introduce a 'removing' flag on struct appleir, gated by the existing spinlock. appleir_remove() sets the flag under the lock and then shuts down the timer with timer_shutdown_sync(), which both drains any in-flight callback and permanently disables further mod_timer() calls. appleir_raw_event() and key_up_tick() bail out early if the flag is set, so no path can arm or run the timer, or dereference appleir->input_dev, after remove() has started tearing down.

The keyrepeat and flatbattery branches of appleir_raw_event() previously called into the input layer without holding the spinlock; take it now so the flag check is well-defined. This incidentally closes a pre-existing read-side race on appleir->current_key in the keyrepeat branch.

This bug is structurally a sibling of commit 4db2af929279 ("HID:
appletb-kbd: fix UAF in inactivity-timer cleanup path") and has been present since the driver was introduced.

Fixes 9a4a5574ce42 ("HID: appleir: add support for Apple ir devices")
---
 drivers/hid/hid-appleir.c | 45 ++++++++++++++++++++++++++++++---------
 1 file changed, 35 insertions(+), 10 deletions(-)
drivers/hid/hid-appleir.c +35 -10
index c45e5aa569d25f..41e7d2d1899344 100644
@@ -109,9 +109,10 @@ struct appleir {
 	struct hid_device *hid;
 	unsigned short keymap[ARRAY_SIZE(appleir_key_table)];
 	struct timer_list key_up_timer;	/* timer for key up */
-	spinlock_t lock;		/* protects .current_key */
+	spinlock_t lock;		/* protects .current_key, .removing */
 	int current_key;		/* the currently pressed key */
 	int prev_key_idx;		/* key index in a 2 packets message */
+	bool removing;			/* set during teardown; gates input_dev access */
 };
 
 static int get_key(int data)
@@ -172,7 +173,7 @@ static void key_up_tick(struct timer_list *t)
 	unsigned long flags;
 
 	spin_lock_irqsave(&appleir->lock, flags);
-	if (appleir->current_key) {
+	if (!appleir->removing && appleir->current_key) {
 		key_up(hid, appleir, appleir->current_key);
 		appleir->current_key = 0;
 	}
@@ -195,6 +196,10 @@ static int appleir_raw_event(struct hid_device *hid, struct hid_report *report,
 		int index;
 
 		spin_lock_irqsave(&appleir->lock, flags);
+		if (appleir->removing) {
+			spin_unlock_irqrestore(&appleir->lock, flags);
+			goto out;
+		}
 		/*
 		 * If we already have a key down, take it up before marking
 		 * this one down
@@ -229,17 +234,25 @@ static int appleir_raw_event(struct hid_device *hid, struct hid_report *report,
 	appleir->prev_key_idx = 0;
 
 	if (!memcmp(data, keyrepeat, sizeof(keyrepeat))) {
-		key_down(hid, appleir, appleir->current_key);
-		/*
-		 * Remote doesn't do key up, either pull them up, in the test
-		 * above, or here set a timer which pulls them up after 1/8 s
-		 */
-		mod_timer(&appleir->key_up_timer, jiffies + HZ / 8);
+		spin_lock_irqsave(&appleir->lock, flags);
+		if (!appleir->removing) {
+			key_down(hid, appleir, appleir->current_key);
+			/*
+			 * Remote doesn't do key up, either pull them up, in
+			 * the test above, or here set a timer which pulls them
+			 * up after 1/8 s
+			 */
+			mod_timer(&appleir->key_up_timer, jiffies + HZ / 8);
+		}
+		spin_unlock_irqrestore(&appleir->lock, flags);
 		goto out;
 	}
 
 	if (!memcmp(data, flatbattery, sizeof(flatbattery))) {
-		battery_flat(appleir);
+		spin_lock_irqsave(&appleir->lock, flags);
+		if (!appleir->removing)
+			battery_flat(appleir);
+		spin_unlock_irqrestore(&appleir->lock, flags);
 		/* Fall through */
 	}
 
@@ -318,8 +331,20 @@ static int appleir_probe(struct hid_device *hid, const struct hid_device_id *id)
 static void appleir_remove(struct hid_device *hid)
 {
 	struct appleir *appleir = hid_get_drvdata(hid);
+	unsigned long flags;
+
+	/*
+	 * Mark the driver as tearing down so that any concurrent raw_event
+	 * (e.g. from a USB URB completion that hid_hw_stop() has not yet
+	 * killed) and the key_up_timer softirq stop touching input_dev
+	 * before hid_hw_stop() frees it via hidinput_disconnect().
+	 */
+	spin_lock_irqsave(&appleir->lock, flags);
+	appleir->removing = true;
+	spin_unlock_irqrestore(&appleir->lock, flags);
+
+	timer_delete_sync(&appleir->key_up_timer);
 	hid_hw_stop(hid);
-	del_timer_sync(&appleir->key_up_timer);
 }
 
 static const struct hid_device_id appleir_devices[] = {
Signature · 1 line
2.53.0