hw/usb/hcd-xhci-sysbus: Fix OOB heap access in xhci_sysbus_intr_raise()
PATCH v3 1/1 hw/usb/hcd-xhci-sysbus: Fix OOB heap access in xhci_sysbus_intr_raise()
From: Thomas Huth <[email protected]>
Some machines like the microvm machine instantiate a "sysbus-xhci" device with just 1 interrupt (by setting the "intrs" property to 1). xhci_sysbus_realize() then only allocates the s->irq array with one entry.
When the guest writes to the ERDP register of a corresponding XHCI "interrupter", the generic XHCI code calls the xhci_sysbus_intr_raise() function with n > 1, and this function then calls qemu_set_irq() with s->irq[n] pointing to a bad heap address. The qemu_set_irq() then tries to call an IRQ handler via a function pointer in that heap space. This either causes QEMU to die with a segmentation fault (if it's a bad address), or even worse runs some unexpected code if the destination of the pointer is executable code.
Looking at the xHCI spec, it is up to the implementation of the host controller how many interrupters are available. So if we only support one or some few interrupters, the registers of the other interrupters should not do anything, i.e. reads should result in zeros and writes should be completely ignored. (big thanks to Peter Maydell for helping with the analyzation of the correct way to fix this here)
This way, the xhci_sysbus_intr_raise() function cannot be called with an invalid interrupt number anymore. But for good measure, also add an assert() statement to the xhci_sysbus_intr_raise() function to prevent that similar problems with calling arbitrary function pointers on the heap could occur again.
Fixes: CVE-2026-16043
Resolves: https://gitlab.com/qemu-project/qemu/-/work_items/4001
---
v3: Use correct word "nonexistent" and don't skip trace in read function
hw/usb/hcd-xhci-sysbus.c | 1 + hw/usb/hcd-xhci.c | 13 +++++++++++++ 2 files changed, 14 insertions(+)
hw/usb/hcd-xhci-sysbus.c +1 -0
@@ -20,6 +20,7 @@ static bool xhci_sysbus_intr_raise(XHCIState *xhci, int n, bool level) {XHCISysbusState *s =container_of (xhci, XHCISysbusState, xhci); +assert (n < xhci->numintrs);qemu_set_irq (s->irq[n], level);return false;
hw/usb/hcd-xhci.c +13 -0
@@ -3044,6 +3044,12 @@ static uint64_t xhci_runtime_read(void *ptr, hwaddr reg, } }else {int v = (reg -0x20 ) /0x20 ; + +if (v >= xhci->numintrs) { +qemu_log_mask (LOG_GUEST_ERROR , +"xhci: read from nonexistent interrupter %i\n" , v); + goto out_trace; + }XHCIInterrupter *intr = &xhci->intr[v];switch (reg &0x1f ) {case 0x00 :/* IMAN */
@@ -3070,6 +3076,7 @@ static uint64_t xhci_runtime_read(void *ptr, hwaddr reg, } } +out_trace:trace_usb_xhci_runtime_read (reg, ret);return ret; }
@@ -3087,7 +3094,13 @@ static void xhci_runtime_write(void *ptr, hwaddr reg,trace_usb_xhci_unimplemented ("runtime write" , reg);return ; } + v = (reg -0x20 ) /0x20 ; +if (v >= xhci->numintrs) { +qemu_log_mask (LOG_GUEST_ERROR , +"xhci: write to nonexistent interrupter %i\n" , v); +return ; + } intr = &xhci->intr[v];switch (reg &0x1f ) {
Signature · 1 line
2.55.0
Quoted 30 lines · Thomas Huth
From: Thomas Huth <[email protected]>
Some machines like the microvm machine instantiate a "sysbus-xhci" device with just 1 interrupt (by setting the "intrs" property to 1).
xhci_sysbus_realize()then only allocates thes->irqarray with one entry.When the guest writes to the ERDP register of a corresponding XHCI "interrupter", the generic XHCI code calls the
xhci_sysbus_intr_raise()function with n > 1, and this function then callsqemu_set_irq()with s->irq[n] pointing to a bad heap address. Theqemu_set_irq()then tries to call an IRQ handler via a function pointer in that heap space. This either causes QEMU to die with a segmentation fault (if it's a bad address), or even worse runs some unexpected code if the destination of the pointer is executable code.Looking at the xHCI spec, it is up to the implementation of the host controller how many interrupters are available. So if we only support one or some few interrupters, the registers of the other interrupters should not do anything, i.e. reads should result in zeros and writes should be completely ignored. (big thanks to Peter Maydell for helping with the analyzation of the correct way to fix this here)
This way, the
xhci_sysbus_intr_raise()function cannot be called with an invalid interrupt number anymore. But for good measure, also add anassert()statement to thexhci_sysbus_intr_raise()function to prevent that similar problems with calling arbitrary function pointers on the heap could occur again.
Quoted 6 lines
Fixes: CVE-2026-16043
Resolves: https://gitlab.com/qemu-project/qemu/-/work_items/4001Reported-by Tristan Madani <[email protected]>Signed-off-by Thomas Huth <[email protected]>---
v3: Use correct word "nonexistent" and don't skip trace in read function
thanks
-- PMM