dt-bindings: input: Convert TI Palmas Power Button to DT schema
Subsystems (3)
PATCH 1/1 dt-bindings: input: Convert TI Palmas Power Button to DT schema
Convert the Texas Instruments Palmas power button bindings to DT schema.
During the conversion, 'wakeup-source' was added. It was missing from the original text binding but is actively used by in-tree boards.
Signed-off-by Eduard Bostina <[email protected]>
--- .../bindings/input/ti,palmas-pwrbutton.txt | 35 ----------- .../bindings/input/ti,palmas-pwrbutton.yaml | 58 +++++++++++++++++++ 2 files changed, 58 insertions(+), 35 deletions(-) delete mode 100644 Documentation/devicetree/bindings/input/ti,palmas-pwrbutton.txt create mode 100644 Documentation/devicetree/bindings/input/ti,palmas-pwrbutton.yaml
Documentation/devicetree/bindings/input/ti,palmas-pwrbutton.txt deleted +0 -35
@@ -1,35 +0,0 @@ -Texas Instruments Palmas family power button module - -This module is part of the Palmas family of PMICs. For more details -about the whole chip see: -Documentation/devicetree/bindings/mfd/palmas.txt. - -This module provides a simple power button event via an Interrupt. - -Required properties: -- compatible: should be one of the following - - "ti,palmas-pwrbutton": For Palmas compatible power on button -- interrupts: Interrupt number of power button submodule on device. - -Optional Properties: - -- ti,palmas-long-press-seconds: Duration in seconds which the power - button should be kept pressed for Palmas to power off automatically. - NOTE: This depends on OTP support and POWERHOLD signal configuration - on platform. Valid values are 6, 8, 10 and 12. -- ti,palmas-pwron-debounce-milli-seconds: Duration in milliseconds - which the power button should be kept pressed for Palmas to register - a press for debouncing purposes. NOTE: This depends on specific - Palmas variation capability. Valid values are 15, 100, 500 and 1000. - -Example: - -&palmas { - palmas_pwr_button: pwrbutton { - compatible = "ti,palmas-pwrbutton"; - interrupt-parent = <&tps659038>; - interrupts = <1 IRQ_TYPE_EDGE_FALLING>; - ti,palmas-long-press-seconds = <12>; - ti,palmas-pwron-debounce-milli-seconds = <15>; - }; -};
Documentation/devicetree/bindings/input/ti,palmas-pwrbutton.yaml new file +58 -0
58 lines not on this page · raw message
Signature · 1 line
2.43.0
Quoted 7 lines · Eduard Bostina
Convert the Texas Instruments Palmas power button bindings to DT schema.
During the conversion, 'wakeup-source' was added. It was missing from the original text binding but is actively used by in-tree boards.
Quoted 8 lines
Signed-off-by Eduard Bostina <[email protected]>--- .../bindings/input/ti,palmas-pwrbutton.txt | 35 ----------- .../bindings/input/ti,palmas-pwrbutton.yaml | 58 +++++++++++++++++++ 2 files changed, 58 insertions(+), 35 deletions(-) delete mode 100644 Documentation/devicetree/bindings/input/ti,palmas-pwrbutton.txt create mode 100644 Documentation/devicetree/bindings/input/ti,palmas-pwrbutton.yaml
Reviewed-by Rob Herring (Arm) <[email protected]>