Skip to contentSkip to conversation

ASoC: amd: acp: Use pcim_iomap_region() in acp-pci

PATCH In review Rosen Penev 2 participants 2 messages Jul 20 – Aug 1

Subsystems (3)
lore
Share & tools
lore
#0 lore raw

PATCH 1/1 ASoC: amd: acp: Use pcim_iomap_region() in acp-pci

Convert acp-pci to the pcim-managed PCI life-cycle. Replace pci_enable_device() with pcim_enable_device() and fold the open-coded pci_request_regions() + devm_ioremap() pair into a single pcim_iomap_region() call for BAR0, which reserves and iomaps the register window.

This lets the driver drop the manual pci_release_regions() and pci_disable_device() calls from the probe error path; pcim releases the device and region automatically on detach or probe failure. The error check moves from a NULL test to IS_ERR(), since pcim_iomap_region() returns an IOMEM_ERR_PTR on failure.

The child platform devices only use devm_ioremap() on their sub-range of BAR0 (no request_mem_region), so reserving the full BAR0 here does not conflict with them.

Assisted-by opencode:hy3-free
---
 sound/soc/amd/acp/acp-pci.c | 26 ++++++--------------------
 1 file changed, 6 insertions(+), 20 deletions(-)
sound/soc/amd/acp/acp-pci.c +6 -20
index f83708755ed1..98771323eace 100644
@@ -118,17 +118,10 @@ static int acp_pci_probe(struct pci_dev *pci, const struct pci_device_id *pci_id
 	if (!chip)
 		return -ENOMEM;
 
-	if (pci_enable_device(pci))
+	if (pcim_enable_device(pci))
 		return dev_err_probe(&pci->dev, -ENODEV,
 				     "pci_enable_device failed\n");
 
-	ret = pci_request_regions(pci, "AMD ACP3x audio");
-	if (ret < 0) {
-		dev_err(&pci->dev, "pci_request_regions failed\n");
-		ret = -ENOMEM;
-		goto disable_pci;
-	}
-
 	pci_set_master(pci);
 
 	chip->acp_rev = pci->revision;
@@ -161,24 +154,21 @@ static int acp_pci_probe(struct pci_dev *pci, const struct pci_device_id *pci_id
 		break;
 	default:
 		dev_err(dev, "Unsupported device revision:0x%x\n", pci->revision);
-		ret = -EINVAL;
-		goto release_regions;
+		return -EINVAL;
 	}
 	chip->flag = flag;
 
 	addr = pci_resource_start(pci, 0);
-	chip->base = devm_ioremap(&pci->dev, addr, pci_resource_len(pci, 0));
-	if (!chip->base) {
-		ret = -ENOMEM;
-		goto release_regions;
-	}
+	chip->base = pcim_iomap_region(pci, 0, "AMD ACP3x audio");
+	if (IS_ERR(chip->base))
+		return PTR_ERR(chip->base);
 
 	chip->addr = addr;
 
 	chip->acp_hw_ops_init(chip);
 	ret = acp_hw_init(chip);
 	if (ret)
-		goto release_regions;
+		goto de_init;
 
 	ret = devm_request_irq(dev, pci->irq, irq_handler,
 			       IRQF_SHARED, "ACP_I2S_IRQ", chip);
@@ -214,10 +204,6 @@ static int acp_pci_probe(struct pci_dev *pci, const struct pci_device_id *pci_id
 
 de_init:
 	acp_hw_deinit(chip);
-release_regions:
-	pci_release_regions(pci);
-disable_pci:
-	pci_disable_device(pci);
 
 	return ret;
 };
Signature · 1 line
2.55.0
maintainer
#1 lore raw
Quoted 1 line · Rosen Penev

ASoC: amd: acp: Use pcim_iomap_region() in acp-pci

Applied to

https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git for-7.3

Thanks!

[1/1] ASoC: amd: acp: Use pcim_iomap_region() in acp-pci

      https://git.kernel.org/broonie/sound/c/596f78db1952

All being well this means that it will be integrated into the linux-next tree (usually sometime in the next 24 hours) and sent to Linus during the next merge window (or sooner if it is a bug fix), however if problems are discovered then the patch may be dropped or reverted.

You may get further e-mails resulting from automated or manual testing and review of the tree, please engage with people reporting problems and send followup patches addressing any issues that are reported if needed.

If any updates are required or you are submitting further changes they should be sent as incremental updates against current git, existing patches will not be replaced.

Please add any relevant lists and maintainers to the CCs when replying to this mail.

Thanks,
Mark