selftests/net/openvswitch: add ICMPv6 echo type match test
Subsystems (4)
PATCH v5 1/1 selftests/net/openvswitch: add ICMPv6 echo type match test
Register OVS_KEY_ATTR_ICMPV6 in the flow key parser so that icmpv6(type=...) can be used in flow specifications. Without this registration the parser silently drops the token and the kernel rejects the flow with EINVAL because the expected ICMPv6 key attribute is missing.
While here, add convert_int() to the ovs_key_ipv6 and ovs_key_icmp fields_map entries so that specifying a field value produces the correct wildcard mask. The IPv6 flow label uses convert_int(20) to produce a 20-bit mask (0x000FFFFF), matching the kernel constraint in flow_netlink.c that rejects masks with bits 20-31 set; byte-wide fields use convert_int(8). The ipv4 counterpart already does this via convert_int(); the ipv6 and icmp classes were simply missing the fifth tuple element. Existing callers that pass empty parentheses are unaffected because convert_int("") returns (0, 0).
Add test_icmpv6 exercising the ICMPv6 echo flow key. The test uses static neighbour entries with nud permanent to prevent racy NDP, then verifies in three steps: install icmpv6(type=128) and icmpv6(type=129) flows and confirm ping works, remove the flows and confirm ping fails, reinstall and confirm recovery.
---
v4 -> v5: rebase onto latest net-next (2026-07-09), add ksft_skip probe for ICMPv6 key support
.../selftests/net/openvswitch/openvswitch.sh | 81 +++++++++++++++++++ .../selftests/net/openvswitch/ovs-dpctl.py | 26 ++++-- 2 files changed, 100 insertions(+), 7 deletions(-)
tools/testing/selftests/net/openvswitch/openvswitch.sh +81 -0
@@ -33,6 +33,7 @@ tests=" flow_set flow-set: Flow modify action_set set: SET action rewrites fields trunc trunc: output truncation + icmpv6 icmpv6: ICMPv6 echo type match psample psample: Sampling packets with psample" info() {
@@ -530,6 +531,86 @@ test_trunc() { return 0 } +# icmpv6 test +# - static neighbours to bypass NDP (nud permanent) +# - icmpv6(type=128) echo request, icmpv6(type=129) echo reply +# - remove flows and verify ping fails, reinstall and recover +test_icmpv6() { + local t="test_icmpv6" + local v6="eth_type(0x86dd),ipv6(proto=58)" + + sbx_add "$t" || return $? + ovs_add_dp "$t" icmpv6 || return 1 + + info "create namespaces" + for ns in client server; do + ovs_add_netns_and_veths "$t" "icmpv6" \ + "$ns" "${ns:0:1}0" "${ns:0:1}1" || return 1 + done + + ip netns exec client ip addr add fd00::1/64 dev c1 nodad + ip netns exec client ip link set c1 up + ip netns exec server ip addr add fd00::2/64 dev s1 nodad + ip netns exec server ip link set s1 up + + local cl_mac sl_mac + cl_mac=$(ip netns exec client ip link show c1 \ + | awk '/link\/ether/ {print $2}') + [ -z "$cl_mac" ] && \ + { info "failed to get c1 hwaddr"; return 1; } + sl_mac=$(ip netns exec server ip link show s1 \ + | awk '/link\/ether/ {print $2}') + [ -z "$sl_mac" ] && \ + { info "failed to get s1 hwaddr"; return 1; } + ip netns exec client ip -6 neigh add fd00::2 \ + lladdr "$sl_mac" nud permanent dev c1 || return 1 + ip netns exec server ip -6 neigh add fd00::1 \ + lladdr "$cl_mac" nud permanent dev s1 || return 1 + + # Probe: check if kernel supports icmpv6 flow key. + ovs_add_flow "$t" icmpv6 \ + "in_port(1),eth(),$v6,icmpv6(type=128)" \ + '2' &>/dev/null + if [ $? -ne 0 ]; then + info "no support for icmpv6 key - skipping" + ovs_exit_sig + return $ksft_skip + fi + ovs_del_flows "$t" icmpv6 + + ovs_add_flow "$t" icmpv6 \ + "in_port(1),eth(),$v6,icmpv6(type=128)" \ + '2' || return 1 + ovs_add_flow "$t" icmpv6 \ + "in_port(2),eth(),$v6,icmpv6(type=129)" \ + '1' || return 1 + + info "verify ICMPv6 echo with type-specific flows" + ovs_sbx "$t" ip netns exec client \ + ping -6 -c 1 -W 2 fd00::2 || return 1 + + ovs_del_flows "$t" icmpv6 + + info "verify ping fails without echo flows" + ovs_sbx "$t" ip netns exec client \ + ping -6 -c 1 -W 2 fd00::2 >/dev/null 2>&1 \ + && { info "ping should fail without flows" + return 1; } + + ovs_add_flow "$t" icmpv6 \ + "in_port(1),eth(),$v6,icmpv6(type=128)" \ + '2' || return 1 + ovs_add_flow "$t" icmpv6 \ + "in_port(2),eth(),$v6,icmpv6(type=129)" \ + '1' || return 1 + + info "verify connectivity restored" + ovs_sbx "$t" ip netns exec client \ + ping -6 -c 1 -W 2 fd00::2 || return 1 + + return 0 +} + # psample test # - use psample to observe packets test_psample() {
tools/testing/selftests/net/openvswitch/ovs-dpctl.py +19 -7
@@ -1255,11 +1255,16 @@ class ovskey(nla): lambda x: ipaddress.IPv6Address(x).packed if x else 0, convert_ipv6, ), - ("label", "label", "%d", lambda x: int(x) if x else 0), - ("proto", "proto", "%d", lambda x: int(x) if x else 0), - ("tclass", "tclass", "%d", lambda x: int(x) if x else 0), - ("hlimit", "hlimit", "%d", lambda x: int(x) if x else 0), - ("frag", "frag", "%d", lambda x: int(x) if x else 0), + ("label", "label", "%d", lambda x: int(x) if x else 0, + convert_int(20)), + ("proto", "proto", "%d", lambda x: int(x) if x else 0, + convert_int(8)), + ("tclass", "tclass", "%d", lambda x: int(x) if x else 0, + convert_int(8)), + ("hlimit", "hlimit", "%d", lambda x: int(x) if x else 0, + convert_int(8)), + ("frag", "frag", "%d", lambda x: int(x) if x else 0, + convert_int(8)), ) def __init__(
@@ -1344,8 +1349,10 @@ class ovskey(nla): ) fields_map = ( - ("type", "type", "%d", lambda x: int(x) if x else 0), - ("code", "code", "%d", lambda x: int(x) if x else 0), + ("type", "type", "%d", lambda x: int(x) if x else 0, + convert_int(8)), + ("code", "code", "%d", lambda x: int(x) if x else 0, + convert_int(8)), ) def __init__(
@@ -1982,6 +1989,11 @@ class ovskey(nla): "icmp", ovskey.ovs_key_icmp, ), + ( + "OVS_KEY_ATTR_ICMPV6", + "icmpv6", + ovskey.ovs_key_icmpv6, + ), ( "OVS_KEY_ATTR_TCP_FLAGS", "tcp_flags",
Signature · 1 line
2.55.0
Gentle ping on this patch. It's been about 10 days without review comments. Please let me know if there are any issues or if a respin is needed.
Thanks,
Minxi
Jakub Kicinski
maintainerQuoted 3 lines · On Sun, 19 Jul 2026 23:24:48 -0400 Minxi Hou wrote:
Gentle ping on this patch. It's been about 10 days without review comments. Please let me know if there are any issues or if a respin is needed.
Read the mailing list. There was an announcement. You're just wasting our time with such stupid pings :/
This patch was applied to netdev/net-next.git (main) by Jakub Kicinski <[email protected]>:
Hello:
This patch was applied to netdev/net-next.git (main) by Jakub Kicinski <[email protected]>:
Quoted 16 lines · On Thu, 9 Jul 2026 08:05:41 -0400 you wrote:
Register
OVS_KEY_ATTR_ICMPV6in the flow key parser so that icmpv6(type=...) can be used in flow specifications. Without this registration the parser silently drops the token and the kernel rejects the flow with EINVAL because the expected ICMPv6 key attribute is missing.While here, add
convert_int()to theovs_key_ipv6andovs_key_icmpfields_mapentries so that specifying a field value produces the correct wildcard mask. The IPv6 flow label usesconvert_int(20)to produce a 20-bit mask (0x000FFFFF), matching the kernel constraint inflow_netlink.cthat rejects masks with bits 20-31 set; byte-wide fields useconvert_int(8). The ipv4 counterpart already does this viaconvert_int(); the ipv6 and icmp classes were simply missing the fifth tuple element. Existing callers that pass empty parentheses are unaffected becauseconvert_int("")returns (0, 0).
Quoted 1 line
[...]
Here is the summary with links:
- [net-next,v5] selftests/net/openvswitch: add ICMPv6 echo type match test
https://git.kernel.org/netdev/net-next/c/6deab902b4c0
You are awesome, thank you!
Signature · 2 lines
Deet-doot-dot, I am a bot. https://korg.docs.kernel.org/patchwork/pwbot.html