Skip to contentSkip to conversation

FAILED: patch "[PATCH] mmc: vub300: fix use-after-free on probe failure" failed to apply to 6.18-stable tree

PATCH New [email protected] 2 participants 3 messages Jul 20 – Jul 27

Subsystems (2)
lore
Share & tools
lore

[email protected]

author maintainer
#0 lore raw

The patch below does not apply to the 6.18-stable tree.
If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <[email protected]>.

To reproduce the conflict and resubmit, you may use the following commands:

git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-6.18.y
git checkout FETCH_HEAD
git cherry-pick -x a3b5f242997a3be7404112fd48784881560aea57
# <resolve conflicts, build, test, etc.>
git commit -s
git send-email --to '<[email protected]>' --in-reply-to '2026072045-starboard-ferment-23aa@gregkh' --subject-prefix 'PATCH 6.18.y' 'HEAD^..'

Possible dependencies:

thanks,

greg k-h

------------------ original commit in Linus's tree ------------------

From a3b5f242997a3be7404112fd48784881560aea57 Mon Sep 17 00:00:00 2001
From: Guangshuo Li <[email protected]>
Date: Fri, 12 Jun 2026 11:27:56 +0800
Subject: [PATCH] mmc: vub300: fix use-after-free on probe failure

The vub300 driver lifetime-manages its controller state using vub300->kref, with vub300_delete() freeing the mmc host when the last reference is dropped. The probe error path after the inactivity timer has been armed still bypasses that lifetime rule, however, and falls through to mmc_free_host() directly if mmc_add_host() fails.

The race window is between arming the inactivity timer and reaching the probe error unwind after mmc_add_host() fails:

        probe thread                     timer/workqueue
        ------------                     ---------------
        kref_init(&vub300->kref)         ref = 1
        kref_get(&vub300->kref)          ref = 2, timer ref
        add_timer(inactivity_timer)      fires after one second
        |
        |   race window
        |<---------------------------------------------------->
        |

mmc_add_host(mmc)
inactivity timer fires vub300_queue_dead_work()
kref_get() ref = 3
queue_work(deadwork)
mmc_add_host() fails
timer_delete_sync()
mmc_free_host(mmc)
frees vub300
deadwork runs
use-after-free

The inactivity timeout is one second, so this would require mmc_add_host() to both fail and take more than one second to do so. This is unlikely to happen in practice, but the error path is still wrong.

timer_delete_sync() only waits for the timer callback itself. It does not flush deadwork that the callback may already have queued. As a result, queued deadwork can still hold a kref while the probe error path directly frees the backing mmc host, including the vub300 storage.

Fix this by using the same lifetime mechanism as disconnect. Clear vub300->interface so that the timer callback and any queued deadwork return early and drop their references, then drop the initial probe reference and return without falling through to err_free_host.

Fixes 0613ad2401f8 ("mmc: vub300: fix return value check of mmc_add_host()")
drivers/mmc/host/vub300.c +7 -3
index 6c3cb2f1c9d3..c1c21e95f5bf 100644
@@ -2336,12 +2336,16 @@ static int vub300_probe(struct usb_interface *interface,
 			 interface_to_InterfaceNumber(interface));
 	retval = mmc_add_host(mmc);
 	if (retval)
-		goto err_delete_timer;
+		goto err_stop_io;
 
 	return 0;
 
-err_delete_timer:
-	timer_delete_sync(&vub300->inactivity_timer);
+err_stop_io:
+	vub300->interface = NULL;
+	kref_put(&vub300->kref, vub300_delete);
+
+	return retval;
+
 err_free_host:
 	mmc_free_host(mmc);
 	/*
maintainer
#1 lore raw

PATCH 1/2 mmc: vub300: rename probe error labels

From: Johan Hovold <[email protected]>

[ Upstream commit 5b8b35d6f4fa758dd5e8ae18526ea1c73f6787e0 ]

Error labels should be named after what they do.

Rename the probe error labels.

Stable-dep-of: a3b5f242997a ("mmc: vub300: fix use-after-free on probe failure")

---
 drivers/mmc/host/vub300.c | 18 ++++++++++--------
 1 file changed, 10 insertions(+), 8 deletions(-)
drivers/mmc/host/vub300.c +10 -8
index 93c4e145009e00..9a864369598160 100644
@@ -2115,19 +2115,19 @@ static int vub300_probe(struct usb_interface *interface,
 	command_out_urb = usb_alloc_urb(0, GFP_KERNEL);
 	if (!command_out_urb) {
 		retval = -ENOMEM;
-		goto error0;
+		goto err_put_udev;
 	}
 	command_res_urb = usb_alloc_urb(0, GFP_KERNEL);
 	if (!command_res_urb) {
 		retval = -ENOMEM;
-		goto error1;
+		goto err_free_out_urb;
 	}
 	/* this also allocates memory for our VUB300 mmc host device */
 	mmc = mmc_alloc_host(sizeof(*vub300), &udev->dev);
 	if (!mmc) {
 		retval = -ENOMEM;
 		dev_err(&udev->dev, "not enough memory for the mmc_host\n");
-		goto error4;
+		goto err_free_res_urb;
 	}
 	/* MMC core transfer sizes tunable parameters */
 	mmc->caps = 0;
@@ -2344,10 +2344,11 @@ static int vub300_probe(struct usb_interface *interface,
 			 interface_to_InterfaceNumber(interface));
 	retval = mmc_add_host(mmc);
 	if (retval)
-		goto error6;
+		goto err_delete_timer;
 
 	return 0;
-error6:
+
+err_delete_timer:
 	timer_delete_sync(&vub300->inactivity_timer);
 err_free_host:
 	mmc_free_host(mmc);
@@ -2355,12 +2356,13 @@ static int vub300_probe(struct usb_interface *interface,
 	 * and hence also frees vub300
 	 * which is contained at the end of struct mmc
 	 */
-error4:
+err_free_res_urb:
 	usb_free_urb(command_res_urb);
-error1:
+err_free_out_urb:
 	usb_free_urb(command_out_urb);
-error0:
+err_put_udev:
 	usb_put_dev(udev);
+
 	return retval;
 }
 
Signature · 1 line
2.53.0
maintainer
#2 lore raw

PATCH 2/2 mmc: vub300: fix use-after-free on probe failure

From: Guangshuo Li <[email protected]>

[ Upstream commit a3b5f242997a3be7404112fd48784881560aea57 ]

The vub300 driver lifetime-manages its controller state using vub300->kref, with vub300_delete() freeing the mmc host when the last reference is dropped. The probe error path after the inactivity timer has been armed still bypasses that lifetime rule, however, and falls through to mmc_free_host() directly if mmc_add_host() fails.

The race window is between arming the inactivity timer and reaching the probe error unwind after mmc_add_host() fails:

        probe thread                     timer/workqueue
        ------------                     ---------------
        kref_init(&vub300->kref)         ref = 1
        kref_get(&vub300->kref)          ref = 2, timer ref
        add_timer(inactivity_timer)      fires after one second
        |
        |   race window
        |<---------------------------------------------------->
        |

mmc_add_host(mmc)
inactivity timer fires vub300_queue_dead_work()
kref_get() ref = 3
queue_work(deadwork)
mmc_add_host() fails
timer_delete_sync()
mmc_free_host(mmc)
frees vub300
deadwork runs
use-after-free

The inactivity timeout is one second, so this would require mmc_add_host() to both fail and take more than one second to do so. This is unlikely to happen in practice, but the error path is still wrong.

timer_delete_sync() only waits for the timer callback itself. It does not flush deadwork that the callback may already have queued. As a result, queued deadwork can still hold a kref while the probe error path directly frees the backing mmc host, including the vub300 storage.

Fix this by using the same lifetime mechanism as disconnect. Clear vub300->interface so that the timer callback and any queued deadwork return early and drop their references, then drop the initial probe reference and return without falling through to err_free_host.

Fixes 0613ad2401f8 ("mmc: vub300: fix return value check of mmc_add_host()")
---
 drivers/mmc/host/vub300.c | 10 +++++++---
 1 file changed, 7 insertions(+), 3 deletions(-)
drivers/mmc/host/vub300.c +7 -3
index 9a864369598160..1614e9995ee68c 100644
@@ -2344,12 +2344,16 @@ static int vub300_probe(struct usb_interface *interface,
 			 interface_to_InterfaceNumber(interface));
 	retval = mmc_add_host(mmc);
 	if (retval)
-		goto err_delete_timer;
+		goto err_stop_io;
 
 	return 0;
 
-err_delete_timer:
-	timer_delete_sync(&vub300->inactivity_timer);
+err_stop_io:
+	vub300->interface = NULL;
+	kref_put(&vub300->kref, vub300_delete);
+
+	return retval;
+
 err_free_host:
 	mmc_free_host(mmc);
 	/*
Signature · 1 line
2.53.0