FAILED: patch "[PATCH] mmc: sdhci-of-dwcmshc: check bus clock enable result in the" failed to apply to 6.1-stable tree

The patch below does not apply to the 6.1-stable tree.
If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <[email protected]>.

To reproduce the conflict and resubmit, you may use the following commands:

git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-6.1.y
git checkout FETCH_HEAD
git cherry-pick -x 521f39ca93cc43ce1b3eae8d44201f8f55dd9151
# <resolve conflicts, build, test, etc.>
git commit -s
git send-email --to '<[email protected]>' --in-reply-to '2026072128-matrimony-subplot-32a3@gregkh' --subject-prefix 'PATCH 6.1.y' 'HEAD^..'

Possible dependencies:

thanks,

greg k-h

------------------ original commit in Linus's tree ------------------

From 521f39ca93cc43ce1b3eae8d44201f8f55dd9151 Mon Sep 17 00:00:00 2001
From: Sergey Shtylyov <[email protected]>
Date: Mon, 1 Jun 2026 17:49:01 +0300
Subject: [PATCH] mmc: sdhci-of-dwcmshc: check bus clock enable result in the
probe() method

In the driver's probe() method, clk_disable_unprepare() for the bus clock is called on the error path even if the prior clk_prepare_enable() call has failed (and the same thing happens in the remove() method as well) -- that would cause the prepare/enable counter imbalance. Also, the same problem can happen in the driver's suspend() method; note that the resume() method does check the clk_prepare_enable()'s result -- let's be consistent and do that in probe() method as well. BTW, I don't know for sure what does the bus clock control -- if it affects the register accesses, the driver will likely cause (e.g. on ARM) a kernel oops if it fails to prepare/enable the bus clock in the probe() method...

Found by Linux Verification Center (linuxtesting.org) with the Svace static analysis tool.

index eef53455b8ee..c688f3eaf468 100644
@@ -2433,13 +2433,16 @@ static int dwcmshc_probe(struct platform_device *pdev)
 			return err;
 
 		priv->bus_clk = devm_clk_get(dev, "bus");
-		if (!IS_ERR(priv->bus_clk))
-			clk_prepare_enable(priv->bus_clk);
+		if (!IS_ERR(priv->bus_clk)) {
+			err = clk_prepare_enable(priv->bus_clk);
+			if (err)
+				goto err_clk;
+		}
 	}
 
 	err = mmc_of_parse(host->mmc);
 	if (err)
-		goto err_clk;
+		goto err_bus_clk;
 
 	sdhci_get_of_property(pdev);
 

@@ -2453,7 +2456,7 @@ static int dwcmshc_probe(struct platform_device *pdev)
 	if (pltfm_data->init) {
 		err = pltfm_data->init(&pdev->dev, host, priv);
 		if (err)
-			goto err_clk;
+			goto err_bus_clk;
 	}
 
 #ifdef CONFIG_ACPI

@@ -2499,9 +2502,10 @@ static int dwcmshc_probe(struct platform_device *pdev)
 err_rpm:
 	pm_runtime_disable(dev);
 	pm_runtime_put_noidle(dev);
+err_bus_clk:
+	clk_disable_unprepare(priv->bus_clk);
 err_clk:
 	clk_disable_unprepare(pltfm_host->clk);
-	clk_disable_unprepare(priv->bus_clk);
 	clk_bulk_disable_unprepare(priv->num_other_clks, priv->other_clks);
 	return err;
 }