ocfs2: validate truncate log dinode before caching
PATCH 1/1 ocfs2: validate truncate log dinode before caching
[BUG]
A corrupted truncate log dinode can pass through mount initialization and reach the delayed flush worker, where it triggers:
kernel BUG at fs/ocfs2/alloc.c:6019!
Oops: invalid opcode: 0000 [#1] SMP KASAN NOPTI RIP: 0010:__ocfs2_flush_truncate_log+0xa87/0xf10 fs/ocfs2/alloc.c:6019 Call Trace: ocfs2_flush_truncate_log fs/ocfs2/alloc.c:6084 [inline] ocfs2_truncate_log_worker+0xa9/0x180 fs/ocfs2/alloc.c:6097 process_one_work+0x8e0/0x1980 kernel/workqueue.c:3263 ...
[CAUSE]ocfs2_get_truncate_log_info() assumes that ocfs2_read_inode_block() always validates the returned dinode. However, ocfs2_read_blocks() skips the validation callback for JBD-managed buffers. The function then reads truncate log fields and exposes the invalid buffer to callers, allowing ocfs2_truncate_log_init() to retain it in osb->osb_tl_bh.
[FIX]
Check the dinode signature in ocfs2_get_truncate_log_info() immediately after the inode read. Reject an invalid dinode as filesystem corruption before reading truncate log fields or returning the inode and buffer to the caller. This keeps invalid state out of the long-lived truncate log cache and preserves the validated-buffer invariant in append, flush, and recovery paths.
--- fs/ocfs2/alloc.c | 13 +++++++++++++ 1 file changed, 13 insertions(+)
fs/ocfs2/alloc.c +13 -0
@@ -6192,6 +6192,19 @@ static int ocfs2_get_truncate_log_info(struct ocfs2_super *osb, } di = (struct ocfs2_dinode *)bh->b_data; +/* +* A JBD-managed buffer may skip the read validation callback. Check +* the signature before exposing the truncate log to callers. +*/ +if (!OCFS2_IS_VALID_DINODE (di)) { + status =ocfs2_error (osb->sb, +"Invalid truncate log dinode #%llu\n" , + (unsigned long long )bh->b_blocknr); +iput (inode); +brelse (bh); + goto bail; + } + tl = &di->id2.i_dealloc; tl_count =le16_to_cpu (tl->tl_count); tl_used =le16_to_cpu (tl->tl_used);
Signature · 1 line
2.43.0
Joseph Qi
maintainerQuoted 4 lines · ZhengYuan Huang
[BUG]
A corrupted truncate log dinode can pass through mount initialization and reach the delayed flush worker, where it triggers:
Quoted 9 lines
kernel BUG at
fs/ocfs2/alloc.c:6019!Oops: invalid opcode: 0000 [#1] SMP KASAN NOPTI RIP: 0010:__ocfs2_flush_truncate_log+0xa87/0xf10 fs/ocfs2/alloc.c:6019 Call Trace: ocfs2_flush_truncate_log fs/ocfs2/alloc.c:6084 [inline] ocfs2_truncate_log_worker+0xa9/0x180 fs/ocfs2/alloc.c:6097 process_one_work+0x8e0/0x1980 kernel/workqueue.c:3263 ...
I've encountered this BUG occasionality. But I don't see why it happens. Do you have more clues on how to reproduce it?
Thanks,
Joseph
Quoted 46 lines
[CAUSE]
ocfs2_get_truncate_log_info()assumes thatocfs2_read_inode_block()always validates the returned dinode. However,ocfs2_read_blocks()skips the validation callback for JBD-managed buffers. The function then reads truncate log fields and exposes the invalid buffer to callers, allowingocfs2_truncate_log_init()to retain it inosb->osb_tl_bh.[FIX]
Check the dinode signature inocfs2_get_truncate_log_info()immediately after the inode read. Reject an invalid dinode as filesystem corruption before reading truncate log fields or returning the inode and buffer to the caller. This keeps invalid state out of the long-lived truncate log cache and preserves the validated-buffer invariant in append, flush, and recovery paths.Fixes 10995aa2451a ("ocfs2: Morph the haphazard OCFS2_IS_VALID_DINODE() checks.")Assisted-by Codex:gpt-5.6-solSigned-off-by ZhengYuan Huang <[email protected]>--- fs/ocfs2/alloc.c | 13 +++++++++++++ 1 file changed, 13 insertions(+)fs/ocfs2/alloc.c +13
-0@@ -6192,6 +6192,19 @@ static int ocfs2_get_truncate_log_info(struct ocfs2_super *osb, } di = (struct ocfs2_dinode *)bh->b_data; +/* +* A JBD-managed buffer may skip the read validation callback. Check +* the signature before exposing the truncate log to callers. +*/ +if (!OCFS2_IS_VALID_DINODE (di)) { + status =ocfs2_error (osb->sb, +"Invalid truncate log dinode #%llu\n" , + (unsigned long long )bh->b_blocknr); +iput (inode); +brelse (bh); + goto bail; + } + tl = &di->id2.i_dealloc; tl_count =le16_to_cpu (tl->tl_count); tl_used =le16_to_cpu (tl->tl_used);
Quoted 18 lines · Joseph Qi
Quoted 4 lines · ZhengYuan Huang
[BUG]
A corrupted truncate log dinode can pass through mount initialization and reach the delayed flush worker, where it triggers:Quoted 9 lines
kernel BUG at
fs/ocfs2/alloc.c:6019!Oops: invalid opcode: 0000 [#1] SMP KASAN NOPTI RIP: 0010:__ocfs2_flush_truncate_log+0xa87/0xf10 fs/ocfs2/alloc.c:6019 Call Trace: ocfs2_flush_truncate_log fs/ocfs2/alloc.c:6084 [inline] ocfs2_truncate_log_worker+0xa9/0x180 fs/ocfs2/alloc.c:6097 process_one_work+0x8e0/0x1980 kernel/workqueue.c:3263 ...
Quoted 5 lines
I've encountered this BUG occasionality. But I don't see why it happens. Do you have more clues on how to reproduce it?
Thanks,
Joseph
Thanks for looking into this.
This bug was originally found by our fuzzing tool. We tried to reproduce it using the automatically saved disk image and syscall program, but so far we have been unable to reproduce the BUG in __ocfs2_flush_truncate_log directly. Instead, the same artifacts have triggered two other issues:
KASAN: use-after-free Read in ocfs2_dx_dir_search
kernel BUG in ocfs2_grow_tree
For the use-after-free in ocfs2_dx_dir_search, I previously submitted a patch that addresses what I believe is its root cause:
https://lore.kernel.org/all/[email protected]/
However, I have not received any feedback on the patch yet, and at this point we are not sure whether that issue is related to the truncate-log corruption reported here.
We are continuing to investigate and will share any new findings. In the meantime, the original artifacts generated by our fuzzer are available here:
https://drive.google.com/file/d/1zCJoUb2uwVqTrGIM4JFLbwkcHRz04TJo/view?usp=sharing
The archive contains the disk image, the PoC program, and a kernel log. To run the reproducer, mount the supplied disk image and execute the PoC. Please note that, in our current tests, these artifacts can trigger the two issues mentioned above, but they do not reproduce the BUG in __ocfs2_flush_truncate_log. The archive also includes the kernel log captured when the original BUG occurred, which may help with further investigation.
Thanks,
ZhengYuan Huang
Joseph Qi
maintainerQuoted 36 lines · ZhengYuan Huang
Quoted 18 lines · Joseph Qi
Quoted 4 lines · ZhengYuan Huang
[BUG]
A corrupted truncate log dinode can pass through mount initialization and reach the delayed flush worker, where it triggers:Quoted 9 lines
kernel BUG at
fs/ocfs2/alloc.c:6019!Oops: invalid opcode: 0000 [#1] SMP KASAN NOPTI RIP: 0010:__ocfs2_flush_truncate_log+0xa87/0xf10 fs/ocfs2/alloc.c:6019 Call Trace: ocfs2_flush_truncate_log fs/ocfs2/alloc.c:6084 [inline] ocfs2_truncate_log_worker+0xa9/0x180 fs/ocfs2/alloc.c:6097 process_one_work+0x8e0/0x1980 kernel/workqueue.c:3263 ...Quoted 5 lines
I've encountered this BUG occasionality. But I don't see why it happens. Do you have more clues on how to reproduce it?
Thanks,
JosephThanks for looking into this.
This bug was originally found by our fuzzing tool. We tried to reproduce it using the automatically saved disk image and syscall program, but so far we have been unable to reproduce the BUG in
__ocfs2_flush_truncate_logdirectly. Instead, the same artifacts have triggered two other issues:KASAN: use-after-free Read in ocfs2_dx_dir_searchkernel BUG in
ocfs2_grow_tree
Quoted 9 lines
For the use-after-free in
ocfs2_dx_dir_search, I previously submitted a patch that addresses what I believe is its root cause:https://lore.kernel.org/all/[email protected]/
However, I have not received any feedback on the patch yet, and at this point we are not sure whether that issue is related to the truncate-log corruption reported here.
It seems I've missed the thread.
And I've found a similar one in:
https://lore.kernel.org/ocfs2-devel/[email protected]/
Could you please check if it fixes the same issue?
Thanks,
Joseph
Quoted 16 lines
We are continuing to investigate and will share any new findings. In the meantime, the original artifacts generated by our fuzzer are available here:
https://drive.google.com/file/d/1zCJoUb2uwVqTrGIM4JFLbwkcHRz04TJo/view?usp=sharing
The archive contains the disk image, the PoC program, and a kernel log. To run the reproducer, mount the supplied disk image and execute the PoC. Please note that, in our current tests, these artifacts can trigger the two issues mentioned above, but they do not reproduce the BUG in
__ocfs2_flush_truncate_log. The archive also includes the kernel log captured when the original BUG occurred, which may help with further investigation.Thanks,
ZhengYuan Huang
Quoted 6 lines · Joseph Qi
It seems I've missed the thread.
And I've found a similar one in:
https://lore.kernel.org/ocfs2-devel/[email protected]/Could you please check if it fixes the same issue?
Yes, this patch fixes the use-after-free in ocfs2_dx_dir_search.
Our analysis indicates that the kernel BUG in __ocfs2_flush_truncate_log was caused by the same use-after-free issue. Therefore, at this point, it seems that no additional fix is needed.
Thanks,
ZhengYuan Huang