arm64: dts: imx8qm-var-som-symphony: enable expansion header UART
Subsystems (2)
PATCH 1/1 arm64: dts: imx8qm-var-som-symphony: enable expansion header UART
From: Stefano Radaelli <[email protected]>
Enable LPUART4 and configure its pin multiplexing to expose the UART interface on the Symphony expansion header.
Signed-off-by Stefano Radaelli <[email protected]>
--- .../boot/dts/freescale/imx8qm-var-som-symphony.dts | 14 ++++++++++++++ 1 file changed, 14 insertions(+)
arch/arm64/boot/dts/freescale/imx8qm-var-som-symphony.dts +14 -0
@@ -287,6 +287,13 @@ &lpuart2 { status = "okay"; }; +/* header */ +&lpuart4 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_lpuart4>; + status = "okay"; +}; + &pca9534 { usb3-signal-route-hog { gpio-hog;
@@ -428,6 +435,13 @@ IMX8QM_LVDS0_I2C1_SDA_DMA_UART2_RX 0x06000020 >; }; + pinctrl_lpuart4: lpuart4grp { + fsl,pins = < + IMX8QM_M40_GPIO0_01_DMA_UART4_TX 0x06000020 + IMX8QM_M40_GPIO0_00_DMA_UART4_RX 0x06000020 + >; + }; + pinctrl_pca9534: pca9534grp { fsl,pins = < IMX8QM_MIPI_CSI0_MCLK_OUT_LSIO_GPIO1_IO24 0x00000021
Signature · 1 line
2.47.3
[email protected]
AppliedFrom: Frank Li <[email protected]>
Quoted 2 lines · Stefano Radaelli
Enable LPUART4 and configure its pin multiplexing to expose the UART interface on the Symphony expansion header.
Applied, thanks!
[1/1] arm64: dts: imx8qm-var-som-symphony: enable expansion header UART
commit: 3c45ac08d2897aeb95ceecde25a6d4935c4ab8be
Best regards,
Signature · 1 line
Frank Li <[email protected]>