ASoC: ti: omap-twl4030: drop support for platform data
Subsystems (4)
PATCH 1/2 ASoC: ti: omap-twl4030: drop support for platform data
There are no users of omap_tw4030_pdata in the mainline kernel so remove support for it from the driver.
--- include/linux/platform_data/omap-twl4030.h | 42 ------- sound/soc/ti/omap-twl4030.c | 134 +++++++-------------- 2 files changed, 44 insertions(+), 132 deletions(-) delete mode 100644 include/linux/platform_data/omap-twl4030.h
include/linux/platform_data/omap-twl4030.h deleted +0 -42
@@ -1,42 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-only */ -/** -* omap-twl4030.h - ASoC machine driver for TI SoC based boards with twl4030 -* codec, header. -* -* Copyright (C) 2012 Texas Instruments Incorporated - https://www.ti.com -* All rights reserved. -* -* Author: Peter Ujfalusi <[email protected]> -*/ - -#ifndef _OMAP_TWL4030_H_ -#define _OMAP_TWL4030_H_ - -/* To select if only one channel is connected in a stereo port */ -#define OMAP_TWL4030_LEFT (1 << 0) -#define OMAP_TWL4030_RIGHT (1 << 1) - -struct omap_tw4030_pdata { -const char *card_name; -/* Voice port is connected to McBSP3 */ -bool voice_connected; - -/* The driver will parse the connection flags if this flag is set */ -bool custom_routing; -/* Flags to indicate connected audio ports. */ -u8 has_hs; -u8 has_hf; -u8 has_predriv; -u8 has_carkit; -bool has_ear; - -bool has_mainmic; -bool has_submic; -bool has_hsmic; -bool has_carkitmic; -bool has_digimic0; -bool has_digimic1; -u8 has_linein; -}; - -#endif /* _OMAP_TWL4030_H_ */
sound/soc/ti/omap-twl4030.c +44 -90
173 lines not on this page · raw message
Signature · 1 line
2.55.0.229.g6434b31f56-goog
PATCH 2/2 ASoC: ti: omap-twl4030: use per-device instance of headset jack gpio
hs_jack_gpios is being potentially shared among several instances of the same device, and is being modified. This is not the best approach to structuring the code (even if the device is in fact a singleton). Change it to allocate a per-device instance.
--- sound/soc/ti/omap-twl4030.c | 24 +++++++++--------------- 1 file changed, 9 insertions(+), 15 deletions(-)
sound/soc/ti/omap-twl4030.c +9 -15
@@ -28,6 +28,7 @@#include "omap-mcbsp.h" struct omap_twl4030 { +struct snd_soc_jack_gpio hs_jack_gpio;struct snd_soc_jack hs_jack; };
@@ -123,15 +124,6 @@ static struct snd_soc_jack_pin hs_jack_pins[] = { }, }; -/* Headset jack detection gpios */ -static struct snd_soc_jack_gpio hs_jack_gpios[] = { - { - .name ="ti,jack-det" , - .report =SND_JACK_HEADSET , - .debounce_time =200 , - }, -}; -static int omap_twl4030_init (struct snd_soc_pcm_runtime *rtd) {struct snd_soc_card *card = rtd->card;
@@ -144,9 +136,6 @@ static int omap_twl4030_init(struct snd_soc_pcm_runtime *rtd)* only want to add the jack detection if the GPIO is there. */ if (of_property_present (card->dev->of_node,"ti,jack-det-gpio" )) { - hs_jack_gpios[0 ].gpiod_dev = card->dev; - hs_jack_gpios[0 ].idx =0 ; - ret = snd_soc_card_jack_new_pins(rtd->card, "Headset Jack", SND_JACK_HEADSET, &priv->hs_jack, hs_jack_pins,
@@ -154,9 +143,14 @@ static int omap_twl4030_init(struct snd_soc_pcm_runtime *rtd)if (ret)return ret; - ret =snd_soc_jack_add_gpios (&priv->hs_jack, -ARRAY_SIZE (hs_jack_gpios), - hs_jack_gpios); + priv->hs_jack_gpio.name ="ti,jack-det" ; + priv->hs_jack_gpio.report =SND_JACK_HEADSET ; + priv->hs_jack_gpio.debounce_time =200 ; + priv->hs_jack_gpio.gpiod_dev = card->dev; + priv->hs_jack_gpio.idx =0 ; + + ret =snd_soc_jack_add_gpios (&priv->hs_jack,1 , + &priv->hs_jack_gpio);if (ret)return ret; }
Signature · 1 line
2.55.0.229.g6434b31f56-goog
Re: [PATCH 2/2] ASoC: ti: omap-twl4030: use per-device instance of headset jack gpio
Hi,
Quoted 7 lines · Dmitry Torokhov
hs_jack_gpiosis being potentially shared among several instances of the same device, and is being modified. This is not the best approach to structuring the code (even if the device is in fact a singleton). Change it to allocate a per-device instance.Signed-off-by Dmitry Torokhov <[email protected]>---
Greetings,
-- Sebastian
Quoted 63 lines
sound/soc/ti/omap-twl4030.c | 24 +++++++++--------------- 1 file changed, 9 insertions(+), 15 deletions(-)sound/soc/ti/omap-twl4030.c +9
-15@@ -28,6 +28,7 @@#include "omap-mcbsp.h" struct omap_twl4030 { +struct snd_soc_jack_gpio hs_jack_gpio;struct snd_soc_jack hs_jack; };@@ -123,15 +124,6 @@ static struct snd_soc_jack_pin hs_jack_pins[] = { }, }; -/* Headset jack detection gpios */ -static struct snd_soc_jack_gpio hs_jack_gpios[] = { - { - .name ="ti,jack-det" , - .report =SND_JACK_HEADSET , - .debounce_time =200 , - }, -}; -static int omap_twl4030_init (struct snd_soc_pcm_runtime *rtd) {struct snd_soc_card *card = rtd->card;@@ -144,9 +136,6 @@ static int omap_twl4030_init(struct snd_soc_pcm_runtime *rtd)* only want to add the jack detection if the GPIO is there. */ if (of_property_present (card->dev->of_node,"ti,jack-det-gpio" )) { - hs_jack_gpios[0 ].gpiod_dev = card->dev; - hs_jack_gpios[0 ].idx =0 ; - ret = snd_soc_card_jack_new_pins(rtd->card, "Headset Jack", SND_JACK_HEADSET, &priv->hs_jack, hs_jack_pins,@@ -154,9 +143,14 @@ static int omap_twl4030_init(struct snd_soc_pcm_runtime *rtd)if (ret)return ret; - ret =snd_soc_jack_add_gpios (&priv->hs_jack, -ARRAY_SIZE (hs_jack_gpios), - hs_jack_gpios); + priv->hs_jack_gpio.name ="ti,jack-det" ; + priv->hs_jack_gpio.report =SND_JACK_HEADSET ; + priv->hs_jack_gpio.debounce_time =200 ; + priv->hs_jack_gpio.gpiod_dev = card->dev; + priv->hs_jack_gpio.idx =0 ; + + ret =snd_soc_jack_add_gpios (&priv->hs_jack,1 , + &priv->hs_jack_gpio);if (ret)return ret; }Signature · 1 line
2.55.0.229.g6434b31f56-goog
Re: [PATCH 2/2] ASoC: ti: omap-twl4030: use per-device instance of headset jack gpio
In reply to Dmitry TorokhovQuoted 9 lines · Dmitry Torokhov
hs_jack_gpiosis being potentially shared among several instances of the same device, and is being modified. This is not the best approach to structuring the code (even if the device is in fact a singleton). Change it to allocate a per-device instance.Signed-off-by Dmitry Torokhov <[email protected]>--- sound/soc/ti/omap-twl4030.c | 24 +++++++++--------------- 1 file changed, 9 insertions(+), 15 deletions(-)
Hi,
Quoted 5 lines · Dmitry Torokhov
There are no users of
omap_tw4030_pdatain the mainline kernel so remove support for it from the driver.Signed-off-by Dmitry Torokhov <[email protected]>---
Greetings,
-- Sebastian
Quoted 239 lines
include/linux/platform_data/omap-twl4030.h | 42 ------- sound/soc/ti/omap-twl4030.c | 134 +++++++-------------- 2 files changed, 44 insertions(+), 132 deletions(-) delete mode 100644 include/linux/platform_data/omap-twl4030.hinclude/linux/platform_data/omap-twl4030.h deleted +0
-42@@ -1,42 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-only */ -/** -* omap-twl4030.h - ASoC machine driver for TI SoC based boards with twl4030 -* codec, header. -* -* Copyright (C) 2012 Texas Instruments Incorporated - https://www.ti.com -* All rights reserved. -* -* Author: Peter Ujfalusi <[email protected]> -*/ - -#ifndef _OMAP_TWL4030_H_ -#define _OMAP_TWL4030_H_ - -/* To select if only one channel is connected in a stereo port */ -#define OMAP_TWL4030_LEFT (1 << 0) -#define OMAP_TWL4030_RIGHT (1 << 1) - -struct omap_tw4030_pdata { -const char *card_name; -/* Voice port is connected to McBSP3 */ -bool voice_connected; - -/* The driver will parse the connection flags if this flag is set */ -bool custom_routing; -/* Flags to indicate connected audio ports. */ -u8 has_hs; -u8 has_hf; -u8 has_predriv; -u8 has_carkit; -bool has_ear; - -bool has_mainmic; -bool has_submic; -bool has_hsmic; -bool has_carkitmic; -bool has_digimic0; -bool has_digimic1; -u8 has_linein; -}; - -#endif /* _OMAP_TWL4030_H_ */ sound/soc/ti/omap-twl4030.c +44
-90@@ -17,7 +17,6 @@*/ #include <linux/platform_device.h> -#include <linux/platform_data/omap-twl4030.h> #include <linux/module.h> #include <linux/of.h> @@ -133,20 +132,12 @@ static struct snd_soc_jack_gpio hs_jack_gpios[] = { }, }; -static inline void twl4030_disconnect_pin (struct snd_soc_dapm_context *dapm, -int connected,char *pin) -{ -if (!connected) -snd_soc_dapm_disable_pin (dapm, pin); -} -static int omap_twl4030_init (struct snd_soc_pcm_runtime *rtd) {struct snd_soc_card *card = rtd->card; -struct snd_soc_dapm_context *dapm =snd_soc_card_to_dapm (card); -struct omap_tw4030_pdata *pdata =dev_get_platdata (card->dev); +struct omap_twl4030 *priv =snd_soc_card_get_drvdata (card); -int ret =0 ; +int ret;/* * This is a bit of a hack, but the GPIO is optional so we @@ -170,29 +161,7 @@ static int omap_twl4030_init(struct snd_soc_pcm_runtime *rtd)return ret; } -/* -* NULL pdata means we booted with DT. In this case the routing is -* provided and the card is fully routed, no need to mark pins. -*/ -if (!pdata || !pdata->custom_routing) -return ret; - -/* Disable not connected paths if not used */ -twl4030_disconnect_pin (dapm, pdata->has_ear,"Earpiece Spk" ); -twl4030_disconnect_pin (dapm, pdata->has_hf,"Handsfree Spk" ); -twl4030_disconnect_pin (dapm, pdata->has_hs,"Headset Stereophone" ); -twl4030_disconnect_pin (dapm, pdata->has_predriv,"Ext Spk" ); -twl4030_disconnect_pin (dapm, pdata->has_carkit,"Carkit Spk" ); - -twl4030_disconnect_pin (dapm, pdata->has_mainmic,"Main Mic" ); -twl4030_disconnect_pin (dapm, pdata->has_submic,"Sub Mic" ); -twl4030_disconnect_pin (dapm, pdata->has_hsmic,"Headset Mic" ); -twl4030_disconnect_pin (dapm, pdata->has_carkitmic,"Carkit Mic" ); -twl4030_disconnect_pin (dapm, pdata->has_digimic0,"Digital0 Mic" ); -twl4030_disconnect_pin (dapm, pdata->has_digimic1,"Digital1 Mic" ); -twl4030_disconnect_pin (dapm, pdata->has_linein,"Line In" ); - -return ret; +return 0 ; }/* Digital audio interface glue - connects codec <--> CPU */ @@ -237,11 +206,15 @@ static struct snd_soc_card omap_twl4030_card = {static int omap_twl4030_probe (struct platform_device *pdev) { -struct omap_tw4030_pdata *pdata =dev_get_platdata (&pdev->dev); -struct device_node *node = pdev->dev.of_node;struct snd_soc_card *card = &omap_twl4030_card; +struct device_node *node, *dai_node;struct omap_twl4030 *priv; -int ret =0 ; +struct property *prop; +int ret; + + node = pdev->dev.of_node; +if (!node) +return -ENODEV ; card->dev = &pdev->dev;@@ -249,62 +222,43 @@ static int omap_twl4030_probe(struct platform_device *pdev)if (priv ==NULL )return -ENOMEM ; -if (node) { -struct device_node *dai_node; -struct property *prop; - -if (snd_soc_of_parse_card_name (card,"ti,model" )) { -dev_err (&pdev->dev,"Card name is not provided\n" ); -return -ENODEV ; - } - - dai_node =of_parse_phandle (node,"ti,mcbsp" ,0 ); -if (!dai_node) { -dev_err (&pdev->dev,"McBSP node is not provided\n" ); -return -EINVAL ; - } - omap_twl4030_dai_links[0 ].cpus->dai_name =NULL ; - omap_twl4030_dai_links[0 ].cpus->of_node = dai_node; - - omap_twl4030_dai_links[0 ].platforms->name =NULL ; - omap_twl4030_dai_links[0 ].platforms->of_node = dai_node; - - dai_node =of_parse_phandle (node,"ti,mcbsp-voice" ,0 ); -if (!dai_node) { - card->num_links =1 ; - }else { - omap_twl4030_dai_links[1 ].cpus->dai_name =NULL ; - omap_twl4030_dai_links[1 ].cpus->of_node = dai_node; - - omap_twl4030_dai_links[1 ].platforms->name =NULL ; - omap_twl4030_dai_links[1 ].platforms->of_node = dai_node; - } - -/* Optional: audio routing can be provided */ - prop =of_find_property (node,"ti,audio-routing" ,NULL ); -if (prop) { - ret =snd_soc_of_parse_audio_routing (card, -"ti,audio-routing" ); -if (ret) -return ret; - - card->fully_routed =1 ; - } - }else if (pdata) { -if (pdata->card_name) { - card->name = pdata->card_name; - }else { -dev_err (&pdev->dev,"Card name is not provided\n" ); -return -ENODEV ; - } - -if (!pdata->voice_connected) - card->num_links =1 ; - }else { -dev_err (&pdev->dev,"Missing pdata\n" ); +if (snd_soc_of_parse_card_name (card,"ti,model" )) { +dev_err (&pdev->dev,"Card name is not provided\n" );return -ENODEV ; } + dai_node =of_parse_phandle (node,"ti,mcbsp" ,0 ); +if (!dai_node) { +dev_err (&pdev->dev,"McBSP node is not provided\n" ); +return -EINVAL ; + } + omap_twl4030_dai_links[0 ].cpus->dai_name =NULL ; + omap_twl4030_dai_links[0 ].cpus->of_node = dai_node; + + omap_twl4030_dai_links[0 ].platforms->name =NULL ; + omap_twl4030_dai_links[0 ].platforms->of_node = dai_node; + + dai_node =of_parse_phandle (node,"ti,mcbsp-voice" ,0 ); +if (!dai_node) { + card->num_links =1 ; + }else { + omap_twl4030_dai_links[1 ].cpus->dai_name =NULL ; + omap_twl4030_dai_links[1 ].cpus->of_node = dai_node; + + omap_twl4030_dai_links[1 ].platforms->name =NULL ; + omap_twl4030_dai_links[1 ].platforms->of_node = dai_node; + } + +/* Optional: audio routing can be provided */ + prop =of_find_property (node,"ti,audio-routing" ,NULL ); +if (prop) { + ret =snd_soc_of_parse_audio_routing (card,"ti,audio-routing" ); +if (ret) +return ret; + + card->fully_routed =1 ; + } +snd_soc_card_set_drvdata (card, priv); ret =devm_snd_soc_register_card (&pdev->dev, card);if (ret) {Signature · 1 line
2.55.0.229.g6434b31f56-goog
Quoted 9 lines · Dmitry Torokhov
There are no users of
omap_tw4030_pdatain the mainline kernel so remove support for it from the driver.Signed-off-by Dmitry Torokhov <[email protected]>--- include/linux/platform_data/omap-twl4030.h | 42 ------- sound/soc/ti/omap-twl4030.c | 134 +++++++-------------- 2 files changed, 44 insertions(+), 132 deletions(-) delete mode 100644 include/linux/platform_data/omap-twl4030.h
Mark Brown
maintainerQuoted 1 line · Dmitry Torokhov
ASoC: ti: omap-twl4030: drop support for platform data
Applied to
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git for-7.3
Thanks!
[1/2] ASoC: ti: omap-twl4030: drop support for platform data
https://git.kernel.org/broonie/sound/c/0f97c75d15c3 [2/2] ASoC: ti: omap-twl4030: use per-device instance of headset jack gpio https://git.kernel.org/broonie/sound/c/a9b7250a2f8b
All being well this means that it will be integrated into the linux-next tree (usually sometime in the next 24 hours) and sent to Linus during the next merge window (or sooner if it is a bug fix), however if problems are discovered then the patch may be dropped or reverted.
You may get further e-mails resulting from automated or manual testing and review of the tree, please engage with people reporting problems and send followup patches addressing any issues that are reported if needed.
If any updates are required or you are submitting further changes they should be sent as incremental updates against current git, existing patches will not be replaced.
Please add any relevant lists and maintainers to the CCs when replying to this mail.
Thanks,
Mark