ARM: dts: BCM5301X: R8000 add NVRAM with MAC address for WAN port
Subsystems (2)
PATCH 1/1 ARM: dts: BCM5301X: R8000 add NVRAM with MAC address for WAN port
The R8000 stores the WAN MAC address at a fixed offset in NVRAM. Define the NVRAM region and attach nvmem-cells to the WAN port so the MAC is assigned automatically by the DSA framework.
Assisted-by opencode:big-pickle
Signed-off-by Rosen Penev <[email protected]>
--- arch/arm/boot/dts/broadcom/bcm4709-netgear-r8000.dts | 12 ++++++++++++ 1 file changed, 12 insertions(+)
arch/arm/boot/dts/broadcom/bcm4709-netgear-r8000.dts +12 -0
@@ -36,6 +36,15 @@ memory@0 { <0x88000000 0x08000000>; }; + nvram@1c080000 { + compatible = "brcm,nvram"; + reg = <0x1c080000 0x180000>; + + et2macaddr: et2macaddr { + #nvmem-cell-cells = <1>; + }; + }; + leds { compatible = "gpio-leds";
@@ -211,6 +220,9 @@ port@3 { port@4 { label = "wan"; + + nvmem-cells = <&et2macaddr 1>; + nvmem-cell-names = "mac-address"; }; port@5 {
Signature · 1 line
2.55.0
From: Florian Fainelli <[email protected]>
Quoted 7 lines · Rosen Penev
The R8000 stores the WAN MAC address at a fixed offset in NVRAM. Define the NVRAM region and attach nvmem-cells to the WAN port so the MAC is assigned automatically by the DSA framework.
Assisted-by opencode:big-pickleSigned-off-by Rosen Penev <[email protected]>---
Applied to https://github.com/Broadcom/stblinux/commits/devicetree/next, thanks! --
Florian