Skip to contentSkip to conversation

HID: core: fix OOB read of field->usage in hid_set_field()

PATCH In review Baul Lee 2 participants 2 messages Jul 26 – Aug 3

Subsystems (2)
lore
Share & tools
lore

Baul Lee

author
#0 lore raw

PATCH 1/1 HID: core: fix OOB read of field->usage in hid_set_field()

hid_set_field() hands field->usage + offset to hid_dump_input() before the guard that bounds offset:

	hid_dump_input(field->report->device, field->usage + offset, value);

	if (offset >= field->report_count) {
		hid_err(...);
		return -1;
	}

Under CONFIG_DEBUG_FS hid_dump_input() dereferences that pointer, with buf = hid_resolv_usage(usage->hid, NULL). The usage[] array is allocated inline with the hid_field in hid_register_field() and holds field->maxusage entries, so an offset past it reads off the end of the kvzalloc()ed allocation and into a neighbouring object. Had the guard run first, offset < report_count <= maxusage would already have confined the pointer to the array.

A caller supplies such an offset today. picolcd_fb_send_tile() validates only report->maxfield before issuing hid_set_field(report->field[0], 11 + i, ...) for i = 0..31, so its offsets are fixed at 11..42 and are never checked against the bound field. When the device registers that field with fewer usages, the framebuffer deferred-io work drives the read on every tile. KASAN reports a 4-byte slab-out-of-bounds read in hid_dump_input() below hid_set_field(), and the same boot logs "offset (1) exceeds report_count (1)" from the guard that runs only afterwards.

Move the hid_dump_input() call below the guard. Because field->maxusage >= field->report_count, the guard then establishes that field->usage + offset lies inside the array before it is dereferenced, for every caller and without changing behaviour on the valid path.

Discovered by XBOW, triaged by Baul Lee <[email protected]>

Fixes 1da177e4c3f4 ("Linux-2.6.12-rc2")
---
 drivers/hid/hid-core.c | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)
drivers/hid/hid-core.c +3 -2
index f107f5103b35..c3035414109d 100644
@@ -1933,13 +1933,14 @@ int hid_set_field(struct hid_field *field, unsigned offset, __s32 value)
 
 	size = field->report_size;
 
-	hid_dump_input(field->report->device, field->usage + offset, value);
-
 	if (offset >= field->report_count) {
 		hid_err(field->report->device, "offset (%d) exceeds report_count (%d)\n",
 				offset, field->report_count);
 		return -1;
 	}
+
+	hid_dump_input(field->report->device, field->usage + offset, value);
+
 	if (field->logical_minimum < 0) {
 		if (value != snto32(s32ton(value, size), size)) {
 			hid_err(field->report->device, "value %d is out of range\n", value);
Signature · 1 line
2.50.1 (Apple Git-155)
maintainer
#1 lore raw
Quoted 33 lines · Baul Lee

hid_set_field() hands field->usage + offset to hid_dump_input() before the guard that bounds offset:

	hid_dump_input(field->report->device, field->usage + offset, value);

	if (offset >= field->report_count) {
		hid_err(...);
		return -1;
	}

Under CONFIG_DEBUG_FS hid_dump_input() dereferences that pointer, with buf = hid_resolv_usage(usage->hid, NULL). The usage[] array is allocated inline with the hid_field in hid_register_field() and holds field->maxusage entries, so an offset past it reads off the end of the kvzalloc()ed allocation and into a neighbouring object. Had the guard run first, offset < report_count <= maxusage would already have confined the pointer to the array.

A caller supplies such an offset today. picolcd_fb_send_tile() validates only report->maxfield before issuing hid_set_field(report->field[0], 11 + i, ...) for i = 0..31, so its offsets are fixed at 11..42 and are never checked against the bound field. When the device registers that field with fewer usages, the framebuffer deferred-io work drives the read on every tile. KASAN reports a 4-byte slab-out-of-bounds read in hid_dump_input() below hid_set_field(), and the same boot logs "offset (1) exceeds report_count (1)" from the guard that runs only afterwards.

Move the hid_dump_input() call below the guard. Because field->maxusage >= field->report_count, the guard then establishes that field->usage + offset lies inside the array before it is dereferenced, for every caller and without changing behaviour on the valid path.

Quoted 7 lines

Discovered by XBOW, triaged by Baul Lee <[email protected]>

Fixes 1da177e4c3f4 ("Linux-2.6.12-rc2")

Good catch. Applied, thanks.

Signature · 2 lines
Jiri Kosina
SUSE Labs