ARM: dts: BCM5301X: EA9200: add wifi definitions
Subsystems (2)
PATCH 1/1 ARM: dts: BCM5301X: EA9200: add wifi definitions
brcm,ccode-map and ieee80211-freq-limit are needed to be specified on some of them for proper operation.
Also add an nvmem definition for the MAC addresses.
Signed-off-by Rosen Penev <[email protected]>
--- .../dts/broadcom/bcm4709-linksys-ea9200.dts | 57 +++++++++++++++++++ 1 file changed, 57 insertions(+)
arch/arm/boot/dts/broadcom/bcm4709-linksys-ea9200.dts +57 -0
@@ -93,6 +93,63 @@ led-3 { }; }; +&pcie_bridge0 { + pcie@0,0 { + device_type = "pci"; + reg = <0x0000 0 0 0 0>; + + #address-cells = <3>; + #size-cells = <2>; + ranges; + + pcie@1,0 { + device_type = "pci"; + reg = <0x800 0 0 0 0>; + + #address-cells = <3>; + #size-cells = <2>; + ranges; + + wifi@0,0 { + compatible = "brcm,bcm4366-fmac", "brcm,bcm4329-fmac"; + reg = <0x0000 0 0 0 0>; + ieee80211-freq-limit = <5170000 5250000>; + brcm,ccode-map = "JP-JP-78", "US-Q2-86"; + nvmem-cells = <&et2macaddr 2>; + nvmem-cell-names = "mac-address"; + }; + }; + + pcie@2,0 { + device_type = "pci"; + reg = <0x1000 0 0 0 0>; + + #address-cells = <3>; + #size-cells = <2>; + ranges; + + wifi@0,0 { + compatible = "brcm,bcm4366-fmac", "brcm,bcm4329-fmac"; + reg = <0x0000 0 0 0 0>; + brcm,ccode-map = "JP-JP-78", "US-Q2-86"; + nvmem-cells = <&et2macaddr 3>; + nvmem-cell-names = "mac-address"; + }; + }; + }; +}; + +&pcie_bridge1 { + wifi@0,0 { + compatible = "brcm,bcm4366-fmac", "brcm,bcm4329-fmac"; + reg = <0x0000 0 0 0 0>; + ieee80211-freq-limit = <5735000 5835000>; + brcm,ccode-map = "JP-JP-78", "US-Q2-86"; + nvmem-cells = <&et2macaddr 4>; + nvmem-cell-names = "mac-address"; + }; +}; + &usb3_phy { status = "okay"; };
Signature · 1 line
2.55.0
From: Florian Fainelli <[email protected]>
Quoted 7 lines · Rosen Penev
brcm,ccode-map and ieee80211-freq-limit are needed to be specified on some of them for proper operation.
Also add an nvmem definition for the MAC addresses.
Signed-off-by Rosen Penev <[email protected]>---
Applied to https://github.com/Broadcom/stblinux/commits/devicetree/next, thanks! --
Florian