platform/x86: asus-armoury: add support for FX517ZR
PATCH 1/1 platform/x86: asus-armoury: add support for FX517ZR
Add DMI match and power-limit table entry for the ASUS TUF Dash F15 (2022), board FX517ZR, an Alder Lake + RTX 3070 laptop.
AC and DC min/max values for ppt_pl1_spl, ppt_pl2_sppt, nv_dynamic_boost and nv_temp_target were read from the sliders in ASUS Armoury Crate's manual performance-tuning mode on Windows for this exact model, since ASUS does not publish these limits on the Web.
Tested locally: values now report correctly via 'asusctl armoury list' instead of unavailable, and Dynamic Boost via nvidia-powerd measurably raises GPU power limit under load, consistent with the 80W base + 25W boost = 105W max TGP in ASUS's own spec sheet for this configuration.
--- drivers/platform/x86/asus-armoury.h | 26 ++++++++++++++++++++++++++ 1 file changed, 26 insertions(+)
drivers/platform/x86/asus-armoury.h +26 -0
@@ -975,6 +975,32 @@ static const struct dmi_system_id power_limits[] = { .requires_fan_curve = true, }, }, + { + .matches = { + DMI_MATCH(DMI_BOARD_NAME, "FX517ZR"), + }, + .driver_data = &(struct power_data ) { + .ac_data = &(struct power_limits ) { + .ppt_pl1_spl_min =28 , + .ppt_pl1_spl_max =85 , + .ppt_pl2_sppt_min =28 , + .ppt_pl2_sppt_max =135 , + .nv_dynamic_boost_min =5 , + .nv_dynamic_boost_max =25 , + .nv_temp_target_min =75 , + .nv_temp_target_max =87 , + }, + .dc_data = &(struct power_limits ) { + .ppt_pl1_spl_min =25 , + .ppt_pl1_spl_max =45 , + .ppt_pl2_sppt_min =35 , + .ppt_pl2_sppt_max =60 , + .nv_temp_target_min =75 , + .nv_temp_target_max =87 , + }, + .requires_fan_curve = true, + }, + }, { .matches = { DMI_MATCH(DMI_BOARD_NAME, "FX607VU"),
Signature · 1 line
2.55.0
Quoted 8 lines · AbdElRahman Soliman
Add DMI match and power-limit table entry for the ASUS TUF Dash F15 (2022), board FX517ZR, an Alder Lake + RTX 3070 laptop.
AC and DC min/max values for
ppt_pl1_spl,ppt_pl2_sppt,nv_dynamic_boostandnv_temp_targetwere read from the sliders in ASUS Armoury Crate's manual performance-tuning mode on Windows for this exact model, since ASUS does not publish these limits on the Web.
Quoted 7 lines
Tested locally: values now report correctly via 'asusctl armoury list' instead of unavailable, and Dynamic Boost via nvidia-powerd measurably raises GPU power limit under load, consistent with the 80W base + 25W boost = 105W max TGP in ASUS's own spec sheet for this configuration.
Assisted-by Claude:claude-sonnet-5
Hi,
Thanks for this.
I would say remove the "Tested locally" paragraph: guidelines says that commit messages are to be written in the second person as if you were telling git what to do.
Also I personally never used a commit message so long and a shorter one will be absolutely be fine too.
Next revision use the -v2 flag and don't forget to email me too.
If you need further help just tell me, thanks!
Quoted 42 lines
Signed-off-by AbdElRahman Soliman <[email protected]>--- drivers/platform/x86/asus-armoury.h | 26 ++++++++++++++++++++++++++ 1 file changed, 26 insertions(+)drivers/platform/x86/asus-armoury.h +26
-0@@ -975,6 +975,32 @@ static const struct dmi_system_id power_limits[] = { .requires_fan_curve = true, }, }, + { + .matches = { + DMI_MATCH(DMI_BOARD_NAME, "FX517ZR"), + }, + .driver_data = &(struct power_data ) { + .ac_data = &(struct power_limits ) { + .ppt_pl1_spl_min =28 , + .ppt_pl1_spl_max =85 , + .ppt_pl2_sppt_min =28 , + .ppt_pl2_sppt_max =135 , + .nv_dynamic_boost_min =5 , + .nv_dynamic_boost_max =25 , + .nv_temp_target_min =75 , + .nv_temp_target_max =87 , + }, + .dc_data = &(struct power_limits ) { + .ppt_pl1_spl_min =25 , + .ppt_pl1_spl_max =45 , + .ppt_pl2_sppt_min =35 , + .ppt_pl2_sppt_max =60 , + .nv_temp_target_min =75 , + .nv_temp_target_max =87 , + }, + .requires_fan_curve = true, + }, + }, { .matches = { DMI_MATCH(DMI_BOARD_NAME, "FX607VU"),