Skip to contentSkip to conversation

net: phy: nxp-tja11xx: cancel registration work on remove

PATCH RESEND Superseded Hongyan Xu 2 participants 2 messages Jul 29 – Aug 11

Subsystems (3)

v3 of 4 Superseded Latest is v4 →

lore
Share & tools
lore

Hongyan Xu

author
#0 lore raw

PATCH RESEND v3 1/1 net: phy: nxp-tja11xx: cancel registration work on remove

tja1102_p0_probe() schedules work to register the second port. That work uses the Port 0 private data and phydev. The private data is devm-allocated, but the driver does not wait for the pending work on remove.

Store the Port 0 private data in phydev->priv and add a remove callback. The callback cancels the registration work before devres teardown frees the state.

This issue was found by a static analysis tool.

---
RESEND:
- resend v3 as a new independent thread as required by netdev
- no code changes

v3:
- drop the Fixes tag
- target net-next instead of net
- no code changes

v2: https://lore.kernel.org/netdev/[email protected]/
v1: https://lore.kernel.org/netdev/[email protected]/

 drivers/net/phy/nxp-tja11xx.c | 9 +++++++++
 1 file changed, 9 insertions(+)
drivers/net/phy/nxp-tja11xx.c +9 -0
index 07e94a247..68062a4c5 100644
@@ -620,6 +620,7 @@ static int tja1102_p0_probe(struct phy_device *phydev)
 		return -ENOMEM;
 
 	priv->phydev = phydev;
+	phydev->priv = priv;
 	INIT_WORK(&priv->phy_register_work, tja1102_p1_register);
 
 	ret = tja11xx_hwmon_register(phydev, priv);
@@ -631,6 +632,13 @@ static int tja1102_p0_probe(struct phy_device *phydev)
 	return 0;
 }
 
+static void tja1102_p0_remove(struct phy_device *phydev)
+{
+	struct tja11xx_priv *priv = phydev->priv;
+
+	cancel_work_sync(&priv->phy_register_work);
+}
+
 static int tja1102_match_phy_device(struct phy_device *phydev, bool port0)
 {
 	int ret;
@@ -847,6 +855,7 @@ static struct phy_driver tja11xx_driver[] = {
 		.features       = PHY_BASIC_T1_FEATURES,
 		.flags          = PHY_POLL_CABLE_TEST,
 		.probe		= tja1102_p0_probe,
+		.remove		= tja1102_p0_remove,
 		.soft_reset	= tja11xx_soft_reset,
 		.config_aneg	= tja11xx_config_aneg,
 		.config_init	= tja11xx_config_init,
Signature · 1 line
2.50.1.windows.1
maintainer Reviewed-by on v3 1/1
#1 lore raw
Quoted 5 lines · Hongyan Xu

tja1102_p0_probe() schedules work to register the second port. That work uses the Port 0 private data and phydev. The private data is devm-allocated, but the driver does not wait for the pending work on remove.

Quoted 8 lines

Store the Port 0 private data in phydev->priv and add a remove callback. The callback cancels the registration work before devres teardown frees the state.

This issue was found by a static analysis tool.

Andrew