Skip to contentSkip to conversation

FAILED: patch "[PATCH] drm/amd/display: Set native cursor mode for disabled CRTCs" failed to apply to 7.1-stable tree

PATCH [email protected] 1 participant 1 message Jul 29

Subsystems (4)
lore
Share & tools
lore

[email protected]

author maintainer
#0 lore raw

The patch below does not apply to the 7.1-stable tree.
If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <[email protected]>.

To reproduce the conflict and resubmit, you may use the following commands:

git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-7.1.y
git checkout FETCH_HEAD
git cherry-pick -x cea54c52d82dd9948126b7518af51ca1de094933
# <resolve conflicts, build, test, etc.>
git commit -s
git send-email --to '<[email protected]>' --in-reply-to '2026072917-requisite-outer-9b7b@gregkh' --subject-prefix 'PATCH 7.1.y' 'HEAD^..'

Possible dependencies:

thanks,

greg k-h

------------------ original commit in Linus's tree ------------------

From cea54c52d82dd9948126b7518af51ca1de094933 Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Timur=20Krist=C3=B3f?= <[email protected]>
Date: Sat, 11 Jul 2026 13:34:35 +0200
Subject: [PATCH] drm/amd/display: Set native cursor mode for disabled CRTCs
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

Always set native cursor mode when the CRTC is disabled, to make sure it doesn't cause atomic commits to fail when they are trying to disable the CRTC.

Fixes 41af6215cdbc ("drm/amd/display: Reject cursor plane on DCE when scaled differently than primary")
Cc Leo Li <[email protected]>
Cc Michel Dänzer <[email protected]>
(cherry picked from commit 2f79f0130f828cf26fe2dcf45291821616af7b47)
drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c +6 -1
index ff337de44f7a..fe6eea28d119 100644
@@ -12814,10 +12814,15 @@ static int dm_crtc_get_cursor_mode(struct amdgpu_device *adev,
 	/* Overlay cursor not supported on HW before DCN
 	 * DCN401/420 does not have the cursor-on-scaled-plane or cursor-on-yuv-plane restrictions
 	 * as previous DCN generations, so enable native mode on DCN401/420
+	 *
+	 * Always set native cursor mode when the CRTC is disabled,
+	 * to make sure it doesn't cause atomic commits to fail when
+	 * they are trying to disable the CRTC.
 	 */
 	if (amdgpu_ip_version(adev, DCE_HWIP, 0) == IP_VERSION(4, 0, 1) ||
 	    amdgpu_ip_version(adev, DCE_HWIP, 0) == IP_VERSION(4, 2, 0) ||
-	    amdgpu_ip_version(adev, DCE_HWIP, 0) == IP_VERSION(4, 2, 1)) {
+	    amdgpu_ip_version(adev, DCE_HWIP, 0) == IP_VERSION(4, 2, 1) ||
+	    !dm_crtc_state->base.enable) {
 		*cursor_mode = DM_CURSOR_NATIVE_MODE;
 		return 0;
 	}