arm: imx943: Update dts files to build with v7.1-dts tag
Subsystems (2)
PATCH 1/1 arm: imx943: Update dts files to build with v7.1-dts tag
When moving to the v7,1-dts tag, we see a few problems trying to build this platform. In turn, when looking at the upstream changes we can see that USB3 support has been included now, but isn't exactly the same as in our tree either. Modify things such that we build again.
---
Please note that these files are not covered directly by a MAINTAINERS entry, so an update to fix that would be appreciated. I'm also not sure if we retain exactly the same functionality after this patch, so a replacement patch to update correctly would also be good.
--- arch/arm/dts/imx943-evk-u-boot.dtsi | 13 ------------- arch/arm/dts/imx943-u-boot.dtsi | 29 ----------------------------- 2 files changed, 42 deletions(-)
arch/arm/dts/imx943-evk-u-boot.dtsi +0 -13
@@ -126,19 +126,6 @@ status = "okay"; }; -&usb3_dwc3 { - bootph-pre-ram; - dr_mode = "otg"; - hnp-disable; - srp-disable; - adp-disable; - usb-role-switch; - role-switch-default-mode = "peripheral"; - snps,dis-u1-entry-quirk; - snps,dis-u2-entry-quirk; - status = "okay"; -}; - &usb3_phy { bootph-pre-ram; orientation-switch;
arch/arm/dts/imx943-u-boot.dtsi +0 -29
@@ -249,35 +249,6 @@ &{/soc} { bootph-all; - usb3: usb@4c010010 { - compatible = "fsl,imx95-dwc3", "fsl,imx8mp-dwc3"; - reg = <0x0 0x4c010010 0x0 0x04>, - <0x0 0x4c1f0000 0x0 0x20>; - ranges; - interrupts = <GIC_SPI 386 IRQ_TYPE_LEVEL_HIGH>; - #address-cells = <2>; - #size-cells = <2>; - clocks = <&scmi_clk IMX94_CLK_HSIO>, - <&scmi_clk IMX94_CLK_32K>; - clock-names = "hsio", "suspend"; - power-domains = <&scmi_devpd IMX94_PD_HSIO_TOP>; - status = "disabled"; - - usb3_dwc3: usb@4c100000 { - compatible = "snps,dwc3"; - reg = <0x0 0x4c100000 0x0 0x10000>; - interrupts = <GIC_SPI 180 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&scmi_clk IMX94_CLK_HSIO>, - <&scmi_clk IMX94_CLK_24M>, - <&scmi_clk IMX94_CLK_32K>; - clock-names = "bus_early", "ref", "suspend"; - phys = <&usb3_phy>, <&usb3_phy>; - phy-names = "usb2-phy", "usb3-phy"; - snps,gfladj-refclk-lpm-sel-quirk; - snps,parkmode-disable-ss-quirk; - }; - }; - usb3_phy: phy@4c1f0040 { compatible = "fsl,imx95-usb-phy", "fsl,imx8mp-usb-phy"; reg = <0x0 0x4c1f0040 0x0 0x40>,
Signature · 1 line
2.43.0
Fabio Estevam
reviewerHi Tom,
Quoted 1 line · Tom Rini
- usb3: usb@4c010010 {
The removal of usb3 caused a build failure, so I did not apply this patch.
Quoted 7 lines · Fabio Estevam
Hi Tom,
Quoted 1 line · Tom Rini
- usb3: usb@4c010010 {
The removal of usb3 caused a build failure, so I did not apply this patch.
OK, so unlike the Qualcomm and Rockchip fixes, this can only go after the v7.1-dts merge. I'll grab it then, thanks.
Signature · 1 line
Tom
Quoted 6 lines · Tom Rini
When moving to the v7,1-dts tag, we see a few problems trying to build this platform. In turn, when looking at the upstream changes we can see that USB3 support has been included now, but isn't exactly the same as in our tree either. Modify things such that we build again.
Applied to u-boot/main, thanks!
[1/1] arm: imx943: Update dts files to build with v7.1-dts tag
commit: 4a237aa35f8ad473000aa174d319749de452a136
Signature · 1 line
Tom