6.12.101-rc1 review
Subsystems (4)
Greg Kroah-Hartman
maintainerPATCH 584/602 USB: gadget: fsl-udc: fix dev_printk() device
In reply to Greg Kroah-Hartman6.12-stable review patch. If anyone has any objections, please let me know.
------------------
From: Johan Hovold <[email protected]>
[ Upstream commit c4dd150fceab281496acb3a643ae712aacb74864 ]
A change replacing custom printk() macros with dev_printk() incorrectly used the gadget struct device instead of the controller struct device (including for messages printed before the gadget device name has been initialised).
Switch to using the controller platform device with dev_printk() so that the controller device and driver names are included in log messages as expected.
--- drivers/usb/gadget/udc/fsl_udc_core.c | 92 +++++++++++++++------------------- drivers/usb/gadget/udc/fsl_usb2_udc.h | 1 2 files changed, 43 insertions(+), 50 deletions(-)
drivers/usb/gadget/udc/fsl_udc_core.c +42 -50
@@ -184,7 +184,7 @@ __acquires(ep->udc->lock)usb_gadget_unmap_request (&ep->udc->gadget, &req->req,ep_is_in (ep));if (status && (status != -ESHUTDOWN )) -dev_vdbg (&udc->gadget.dev,"complete %s req %p stat %d len %u/%u\n" , +dev_vdbg (udc->dev,"complete %s req %p stat %d len %u/%u\n" , ep->ep.name, &req->req, status, req->req.actual, req->req.length);
@@ -286,7 +286,7 @@ static int dr_controller_setup(struct fs timeout = jiffies +FSL_UDC_RESET_TIMEOUT ;while (fsl_readl (&dr_regs->usbcmd) &USB_CMD_CTRL_RESET ) {if (time_after (jiffies, timeout)) { -dev_err (&udc->gadget.dev,"udc reset timeout!\n" ); +dev_err (udc->dev,"udc reset timeout!\n" );return -ETIMEDOUT ; }cpu_relax ();
@@ -309,7 +309,7 @@ static int dr_controller_setup(struct fs tmp &=USB_EP_LIST_ADDRESS_MASK ;fsl_writel (tmp, &dr_regs->endpointlistaddr); -dev_vdbg (&udc->gadget.dev, +dev_vdbg (udc->dev,"vir[qh_base] is %p phy[qh_base] is 0x%8x reg is 0x%8x\n" , udc->ep_qh, (int )tmp,fsl_readl (&dr_regs->endpointlistaddr));
@@ -500,7 +500,7 @@ static void struct_ep_qh_setup(struct fs tmp = max_pkt_len <<EP_QUEUE_HEAD_MAX_PKT_LEN_POS ;break ;default : -dev_vdbg (&udc->gadget.dev,"error ep type is %d\n" , ep_type); +dev_vdbg (udc->dev,"error ep type is %d\n" , ep_type);return ; }if (zlt)
@@ -613,7 +613,7 @@ static int fsl_ep_enable(struct usb_ep *spin_unlock_irqrestore (&udc->lock, flags); retval =0 ; -dev_vdbg (&udc->gadget.dev,"enabled %s (ep%d%s) maxpacket %d\n" , +dev_vdbg (udc->dev,"enabled %s (ep%d%s) maxpacket %d\n" , ep->ep.name, ep->ep.desc->bEndpointAddress &0x0f , (desc->bEndpointAddress &USB_DIR_IN ) ?"in" :"out" , max);
@@ -634,13 +634,8 @@ static int fsl_ep_disable(struct usb_epint ep_num; ep = container_of(_ep, struct fsl_ep, ep); -if (!_ep || !ep->ep.desc) { -/* -* dev_vdbg(&udc->gadget.dev, "%s not enabled\n", -* _ep ? ep->ep.name : NULL); -*/ +if (!_ep || !ep->ep.desc)return -EINVAL ; - }/* disable ep on controller */ ep_num =ep_index (ep);
@@ -664,7 +659,7 @@ static int fsl_ep_disable(struct usb_ep ep->stopped =1 ;spin_unlock_irqrestore (&udc->lock, flags); -dev_vdbg (&udc->gadget.dev,"disabled %s OK\n" , _ep->name); +dev_vdbg (udc->dev,"disabled %s OK\n" , _ep->name);return 0 ; }
@@ -724,9 +719,6 @@ static void fsl_queue_td(struct fsl_ep * {u32 temp, bitmask, tmp_stat; -/* dev_vdbg(&udc->gadget.dev, "QH addr Register 0x%8x\n", dr_regs->endpointlistaddr); -dev_vdbg(&udc->gadget.dev, "ep_qh[%d] addr is 0x%8x\n", i, (u32)&(ep->udc->ep_qh[i])); */ - bitmask =ep_is_in (ep) ? (1 << (ep_index (ep) +16 )) : (1 << (ep_index (ep)));
@@ -813,7 +805,7 @@ static struct ep_td_struct *fsl_build_dt *is_last =0 ;if ((*is_last) ==0 ) -dev_vdbg (&udc_controller->gadget.dev,"multi-dtd request!\n" ); +dev_vdbg (udc_controller->dev,"multi-dtd request!\n" );/* Fill in the transfer size; set active bit */ swap_temp = ((*length <<DTD_LENGTH_BIT_POS ) |DTD_STATUS_ACTIVE );
@@ -825,7 +817,7 @@ static struct ep_td_struct *fsl_build_dtmb (); -dev_vdbg (&udc_controller->gadget.dev,"length = %d address= 0x%x\n" , *length, (int )*dma); +dev_vdbg (udc_controller->dev,"length = %d address= 0x%x\n" , *length, (int )*dma);return dtd; }
@@ -876,11 +868,11 @@ fsl_ep_queue(struct usb_ep *_ep, struct/* catch various bogus parameters */ if (!_req || !req->req.complete || !req->req.buf || !list_empty (&req->queue)) { -dev_vdbg (&udc->gadget.dev,"%s, bad params\n" , __func__); +dev_vdbg (udc->dev,"%s, bad params\n" , __func__);return -EINVAL ; }if (unlikely (!ep->ep.desc)) { -dev_vdbg (&udc->gadget.dev,"%s, bad ep\n" , __func__); +dev_vdbg (udc->dev,"%s, bad ep\n" , __func__);return -EINVAL ; }if (usb_endpoint_xfer_isoc (ep->ep.desc)) {
@@ -1040,7 +1032,7 @@ static int fsl_ep_set_halt(struct usb_ep udc->ep0_dir =0 ; } out: -dev_vdbg (&udc->gadget.dev,"%s %s halt stat %d\n" , ep->ep.name, +dev_vdbg (udc->dev,"%s %s halt stat %d\n" , ep->ep.name, value ?"set" :"clear" , status);return status;
@@ -1109,7 +1101,7 @@ static void fsl_ep_fifo_flush(struct usb/* Wait until flush complete */ while (fsl_readl (&dr_regs->endptflush)) {if (time_after (jiffies, timeout)) { -dev_err (&udc_controller->gadget.dev, +dev_err (udc_controller->dev,"ep flush timeout\n" );return ; }
@@ -1182,7 +1174,7 @@ static int fsl_vbus_session(struct usb_g udc = container_of(gadget, struct fsl_udc, gadget);spin_lock_irqsave (&udc->lock, flags); -dev_vdbg (&gadget->dev,"VBUS %s\n" ,str_on_off (is_active)); +dev_vdbg (udc->dev,"VBUS %s\n" ,str_on_off (is_active)); udc->vbus_active = (is_active !=0 );if (can_pullup (udc)) fsl_writel((fsl_readl(&dr_regs->usbcmd) | USB_CMD_RUN_STOP),
@@ -1548,7 +1540,7 @@ static void ep0_req_complete(struct fsl_ udc->ep0_state =WAIT_FOR_SETUP ;break ;case WAIT_FOR_SETUP : -dev_err (&udc->gadget.dev,"Unexpected ep0 packets\n" ); +dev_err (udc->dev,"Unexpected ep0 packets\n" );break ;default :ep0stall (udc);
@@ -1617,7 +1609,7 @@ static int process_ep_req(struct fsl_udc errors =hc32_to_cpu (curr_td->size_ioc_sts);if (errors &DTD_ERROR_MASK ) {if (errors &DTD_STATUS_HALTED ) { -dev_err (&udc->gadget.dev,"dTD error %08x QH=%d\n" , errors, pipe); +dev_err (udc->dev,"dTD error %08x QH=%d\n" , errors, pipe);/* Clear the errors and Halt condition */ tmp =hc32_to_cpu (curr_qh->size_ioc_int_sts); tmp &= ~errors;
@@ -1628,26 +1620,26 @@ static int process_ep_req(struct fsl_udcbreak ; }if (errors &DTD_STATUS_DATA_BUFF_ERR ) { -dev_vdbg (&udc->gadget.dev,"Transfer overflow\n" ); +dev_vdbg (udc->dev,"Transfer overflow\n" ); status = -EPROTO ;break ; }else if (errors &DTD_STATUS_TRANSACTION_ERR ) { -dev_vdbg (&udc->gadget.dev,"ISO error\n" ); +dev_vdbg (udc->dev,"ISO error\n" ); status = -EILSEQ ;break ; }else -dev_err (&udc->gadget.dev, +dev_err (udc->dev,"Unknown error has occurred (0x%x)!\n" , errors); }else if (hc32_to_cpu (curr_td->size_ioc_sts) &DTD_STATUS_ACTIVE ) { -dev_vdbg (&udc->gadget.dev,"Request not complete\n" ); +dev_vdbg (udc->dev,"Request not complete\n" ); status =REQ_UNCOMPLETE ;return status; }else if (remaining_length) {if (direction) { -dev_vdbg (&udc->gadget.dev, +dev_vdbg (udc->dev,"Transmit dTD remaining length not zero\n" ); status = -EPROTO ;break ;
@@ -1655,8 +1647,7 @@ static int process_ep_req(struct fsl_udcbreak ; } }else { -dev_vdbg (&udc->gadget.dev, -"dTD transmitted successful\n" ); +dev_vdbg (udc->dev,"dTD transmitted successful\n" ); }if (j != curr_req->dtd_count -1 )
@@ -1699,7 +1690,7 @@ static void dtd_complete_irq(struct fsl_/* If the ep is configured */ if (!curr_ep->ep.name) { -dev_warn (&udc->gadget.dev,"Invalid EP?\n" ); +dev_warn (udc->dev,"Invalid EP?\n" );continue ; }
@@ -1708,7 +1699,7 @@ static void dtd_complete_irq(struct fsl_ queue) { status =process_ep_req (udc, i, curr_req); -dev_vdbg (&udc->gadget.dev, +dev_vdbg (udc->dev,"status of process_ep_req= %d, ep = %d\n" , status, ep_num);if (status ==REQ_UNCOMPLETE )
@@ -1829,7 +1820,7 @@ static void reset_irq(struct fsl_udc *udwhile (fsl_readl (&dr_regs->endpointprime)) {/* Wait until all endptprime bits cleared */ if (time_after (jiffies, timeout)) { -dev_err (&udc->gadget.dev,"Timeout for reset\n" ); +dev_err (udc->dev,"Timeout for reset\n" );break ; }cpu_relax ();
@@ -1839,7 +1830,7 @@ static void reset_irq(struct fsl_udc *udfsl_writel (0xffffffff , &dr_regs->endptflush);if (fsl_readl (&dr_regs->portsc1) &PORTSCX_PORT_RESET ) { -dev_vdbg (&udc->gadget.dev,"Bus reset\n" ); +dev_vdbg (udc->dev,"Bus reset\n" );/* Bus is reseting */ udc->bus_reset =1 ;/* Reset all the queues, include XD, dTD, EP queue
@@ -1847,7 +1838,7 @@ static void reset_irq(struct fsl_udc *udreset_queues (udc, true); udc->usb_state =USB_STATE_DEFAULT ; }else { -dev_vdbg (&udc->gadget.dev,"Controller reset\n" ); +dev_vdbg (udc->dev,"Controller reset\n" );/* initialize usb hw reg except for regs for EP, not * touch usbintr reg */ dr_controller_setup (udc);
@@ -1881,7 +1872,7 @@ static irqreturn_t fsl_udc_irq(int irq,/* Clear notification bits */ fsl_writel (irq_src, &dr_regs->usbsts); -/* dev_vdbg(&udc->gadget.dev, "irq_src [0x%8x]", irq_src); */ +/* dev_vdbg(udc->dev, "irq_src [0x%8x]", irq_src); */ /* Need to resume? */ if (udc->usb_state ==USB_STATE_SUSPENDED )
@@ -1890,7 +1881,7 @@ static irqreturn_t fsl_udc_irq(int irq,/* USB Interrupt */ if (irq_src &USB_STS_INT ) { -dev_vdbg (&udc->gadget.dev,"Packet int\n" ); +dev_vdbg (udc->dev,"Packet int\n" );/* Setup package, we only support ep0 as control ep */ if (fsl_readl (&dr_regs->endptsetupstat) &EP_SETUP_STATUS_EP0 ) { tripwire_handler(udc, 0,
@@ -1919,7 +1910,7 @@ static irqreturn_t fsl_udc_irq(int irq,/* Reset Received */ if (irq_src &USB_STS_RESET ) { -dev_vdbg (&udc->gadget.dev,"reset int\n" ); +dev_vdbg (udc->dev,"reset int\n" );reset_irq (udc); status =IRQ_HANDLED ; }
@@ -1931,7 +1922,7 @@ static irqreturn_t fsl_udc_irq(int irq, }if (irq_src & (USB_STS_ERR |USB_STS_SYS_ERR )) { -dev_vdbg (&udc->gadget.dev,"Error IRQ %x\n" , irq_src); +dev_vdbg (udc->dev,"Error IRQ %x\n" , irq_src); }spin_unlock_irqrestore (&udc->lock, flags);
@@ -1967,7 +1958,7 @@ static int fsl_udc_start(struct usb_gadg udc_controller->transceiver->otg, &udc_controller->gadget);if (retval <0 ) { -dev_err (&udc_controller->gadget.dev,"can't bind to transceiver\n" ); +dev_err (udc_controller->dev,"can't bind to transceiver\n" ); udc_controller->driver =NULL ;return retval; }
@@ -2252,7 +2243,7 @@ static int struct_udc_setup(struct fsl_u udc->eps =kcalloc (udc->max_ep,sizeof (struct fsl_ep ),GFP_KERNEL );if (!udc->eps) { -dev_err (&udc->gadget.dev,"kmalloc udc endpoint status failed\n" ); +dev_err (udc->dev,"kmalloc udc endpoint status failed\n" ); goto eps_alloc_failed; }
@@ -2267,7 +2258,7 @@ static int struct_udc_setup(struct fsl_u udc->ep_qh =dma_alloc_coherent (&pdev->dev, size, &udc->ep_qh_dma,GFP_KERNEL );if (!udc->ep_qh) { -dev_err (&udc->gadget.dev,"malloc QHs for udc failed\n" ); +dev_err (udc->dev,"malloc QHs for udc failed\n" ); goto ep_queue_alloc_failed; }
@@ -2278,14 +2269,14 @@ static int struct_udc_setup(struct fsl_u udc->status_req =container_of (fsl_alloc_request (NULL ,GFP_KERNEL ), struct fsl_req, req);if (!udc->status_req) { -dev_err (&udc->gadget.dev,"kzalloc for udc status request failed\n" ); +dev_err (udc->dev,"kzalloc for udc status request failed\n" ); goto udc_status_alloc_failed; }/* allocate a small amount of memory to get valid address */ udc->status_req->req.buf =kmalloc (8 ,GFP_KERNEL );if (!udc->status_req->req.buf) { -dev_err (&udc->gadget.dev,"kzalloc for udc request buffer failed\n" ); +dev_err (udc->dev,"kzalloc for udc request buffer failed\n" ); goto udc_req_buf_alloc_failed; }
@@ -2373,6 +2364,7 @@ static int fsl_udc_probe(struct platformif (udc_controller ==NULL )return -ENOMEM ; + udc_controller->dev = &pdev->dev; pdata =dev_get_platdata (&pdev->dev); udc_controller->pdata = pdata;spin_lock_init (&udc_controller->lock);
@@ -2382,7 +2374,7 @@ static int fsl_udc_probe(struct platformif (pdata->operating_mode ==FSL_USB2_DR_OTG ) { udc_controller->transceiver =usb_get_phy (USB_PHY_TYPE_USB2 );if (IS_ERR_OR_NULL (udc_controller->transceiver)) { -dev_err (&udc_controller->gadget.dev,"Can't find OTG driver!\n" ); +dev_err (&pdev->dev,"Can't find OTG driver!\n" ); ret = -ENODEV ; goto err_kfree; }
@@ -2398,7 +2390,7 @@ static int fsl_udc_probe(struct platformif (pdata->operating_mode ==FSL_USB2_DR_DEVICE ) {if (!request_mem_region (res->start,resource_size (res), driver_name)) { -dev_err (&udc_controller->gadget.dev,"request mem region for %s failed\n" , pdev->name); +dev_err (&pdev->dev,"failed to request mem region\n" ); ret = -EBUSY ; goto err_kfree; }
@@ -2429,7 +2421,7 @@ static int fsl_udc_probe(struct platform/* Read Device Controller Capability Parameters register */ dccparams =fsl_readl (&dr_regs->dccparams);if (!(dccparams &DCCPARAMS_DC )) { -dev_err (&udc_controller->gadget.dev,"This SOC doesn't support device role\n" ); +dev_err (&pdev->dev,"This SOC doesn't support device role\n" ); ret = -ENODEV ; goto err_exit; }
@@ -2447,14 +2439,14 @@ static int fsl_udc_probe(struct platform ret =request_irq (udc_controller->irq, fsl_udc_irq,IRQF_SHARED , driver_name, udc_controller);if (ret !=0 ) { -dev_err (&udc_controller->gadget.dev,"cannot request irq %d err %d\n" , +dev_err (&pdev->dev,"cannot request irq %d err %d\n" , udc_controller->irq, ret); goto err_exit; }/* Initialize the udc structure including QH member and other member */ if (struct_udc_setup (udc_controller, pdev)) { -dev_err (&udc_controller->gadget.dev,"Can't initialize udc data structure\n" ); +dev_err (&pdev->dev,"Can't initialize udc data structure\n" ); ret = -ENOMEM ; goto err_free_irq; }
drivers/usb/gadget/udc/fsl_usb2_udc.h +1 -0
@@ -470,6 +470,7 @@ struct fsl_ep {#define EP_DIR_OUT 0struct fsl_udc { +struct device *dev;struct usb_gadget gadget;struct usb_gadget_driver *driver;struct fsl_usb2_platform_data *pdata;
Greg Kroah-Hartman
maintainerPATCH 585/602 usb: musb: omap2430: clean up probe error handling
In reply to Greg Kroah-Hartman6.12-stable review patch. If anyone has any objections, please let me know.
------------------
From: Johan Hovold <[email protected]>
commit 51d4b0a44c82e5eff056ef76acd2c3c605a8eb74 upstream.
Using numbered error labels is discouraged (e.g. as it requires renumbering them when adding a new intermediate error path).
Rename the error labels after what they do.
While at it, drop the redundant platform allocation failure dev_err() as the error would already have been logged by the allocator.
Stable-dep-of: c947360ae63e ("usb: musb: omap2430: Do not put borrowed of_node in probe")
--- drivers/usb/musb/omap2430.c | 23 ++++++++++------------- 1 file changed, 10 insertions(+), 13 deletions(-)
drivers/usb/musb/omap2430.c +10 -13
@@ -318,13 +318,11 @@ static int omap2430_probe(struct platfor glue =devm_kzalloc (&pdev->dev,sizeof (*glue),GFP_KERNEL );if (!glue) - goto err0; +return -ENOMEM ; musb =platform_device_alloc ("musb-hdrc" ,PLATFORM_DEVID_AUTO ); -if (!musb) { -dev_err (&pdev->dev,"failed to allocate musb device\n" ); - goto err0; - } +if (!musb) +return -ENOMEM ; musb->dev.parent = &pdev->dev; musb->dev.dma_mask = &omap2430_dmamask;
@@ -348,15 +346,15 @@ static int omap2430_probe(struct platfor pdata =devm_kzalloc (&pdev->dev,sizeof (*pdata),GFP_KERNEL );if (!pdata) - goto err2; + goto err_put_musb; data =devm_kzalloc (&pdev->dev,sizeof (*data),GFP_KERNEL );if (!data) - goto err2; + goto err_put_musb; config =devm_kzalloc (&pdev->dev,sizeof (*config),GFP_KERNEL );if (!config) - goto err2; + goto err_put_musb;of_property_read_u32 (np,"mode" , (u32 *)&pdata->mode); of_property_read_u32(np, "interface-type",
@@ -379,7 +377,7 @@ static int omap2430_probe(struct platforif (!control_pdev) {dev_err (&pdev->dev,"Failed to get control device\n" ); ret = -EINVAL ; - goto err2; + goto err_put_musb; } glue->control_otghs = &control_pdev->dev; }
@@ -455,22 +453,21 @@ static int omap2430_probe(struct platfor ret =platform_device_add (musb);if (ret) {dev_err (&pdev->dev,"failed to register musb device\n" ); - goto err3; + goto err_disable_rpm; }of_node_put (np);return 0 ; -err3: +err_disable_rpm:pm_runtime_disable (glue->dev); err_put_control_otghs:if (!IS_ERR (glue->control_otghs))put_device (glue->control_otghs); -err2: +err_put_musb:of_node_put (np);platform_device_put (musb); -err0:return ret; }
Greg Kroah-Hartman
maintainerPATCH 586/602 usb: musb: omap2430: Do not put borrowed of_node in probe
In reply to Greg Kroah-Hartman6.12-stable review patch. If anyone has any objections, please let me know.
------------------
From: Guangshuo Li <[email protected]>
commit c947360ae63eee1c9eacc030dd6f5a53f717addf upstream.
omap2430_probe() stores pdev->dev.of_node in a local np variable. This is a borrowed pointer and the probe function does not take a reference to it.
The success and error paths nevertheless call of_node_put(np). This drops a reference that is owned by the platform device, and can leave pdev->dev.of_node with an unbalanced reference count.
Do not put the borrowed platform device node from omap2430_probe(). References taken for the child MUSB device are handled by the device core, and the ctrl-module phandle reference is still released separately.
--- drivers/usb/musb/omap2430.c | 2 -- 1 file changed, 2 deletions(-)
drivers/usb/musb/omap2430.c +0 -2
@@ -455,7 +455,6 @@ static int omap2430_probe(struct platfordev_err (&pdev->dev,"failed to register musb device\n" ); goto err_disable_rpm; } -of_node_put (np);return 0 ;
@@ -465,7 +464,6 @@ err_put_control_otghs:if (!IS_ERR (glue->control_otghs))put_device (glue->control_otghs); err_put_musb: -of_node_put (np);platform_device_put (musb);return ret;
Greg Kroah-Hartman
maintainerPATCH 587/602 net/mlx5e: Fix NULL pointer dereference in ioctl module EEPROM query
In reply to Greg Kroah-Hartman6.12-stable review patch. If anyone has any objections, please let me know.
------------------
From: Gal Pressman <[email protected]>
commit 7d36a4a8bf62dc508bc6bb4b59727aec25064ca5 upstream.
The mlx5_query_mcia() function unconditionally dereferences the status pointer to store the MCIA register status value.
However, mlx5e_get_module_id() passes NULL since it doesn't need the status value.
Add a NULL check before dereferencing the status pointer to prevent a NULL pointer dereference.
--- drivers/net/ethernet/mellanox/mlx5/core/port.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-)
drivers/net/ethernet/mellanox/mlx5/core/port.c +4 -2
@@ -393,9 +393,11 @@ static int mlx5_query_mcia(struct mlx5_cif (err)return err; - *status =MLX5_GET (mcia_reg, out, status); -if (*status) +if (MLX5_GET (mcia_reg, out, status)) { +if (status) + *status =MLX5_GET (mcia_reg, out, status);return -EIO ; + } ptr =MLX5_ADDR_OF (mcia_reg, out, dwords);memcpy (data, ptr, size);
Greg Kroah-Hartman
maintainerPATCH 588/602 gpu: Fix uninitialized buddy for built-in drivers
In reply to Greg Kroah-Hartman6.12-stable review patch. If anyone has any objections, please let me know.
------------------
From: Koen Koning <[email protected]>
commit cc27314c67516c138ee3829197d1c3b998e29fae upstream.
Move buddy to the start of the link order, so its __init runs before any other built-in drivers that may depend on it. Otherwise, a built-in driver that tries to use the buddy allocator will run into a kernel NULL pointer dereference because slab_blocks is uninitialized.
Specifically, this fixes drm/xe (as built-in) running into a kernel panic during boot, because it uses buddy during device probe.
--- drivers/gpu/Makefile | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)
drivers/gpu/Makefile +2 -1
@@ -2,7 +2,8 @@ # drm/tegra depends on host1x, so if both drivers are built-in care must be # taken to initialize them in the correct order. Link order is the only way # to ensure this currently. +# Similarly, buddy must come first since it is used by other drivers. +obj-$(CONFIG_GPU_BUDDY) += buddy.o obj-y += host1x/ drm/ vga/ tests/ obj-$(CONFIG_IMX_IPUV3_CORE) += ipu-v3/ obj-$(CONFIG_TRACE_GPU_MEM) += trace/ -obj-$(CONFIG_GPU_BUDDY) += buddy.o
Greg Kroah-Hartman
maintainerPATCH 589/602 rxrpc: Disable IRQ, not BH, to take the lock for ->attend_link
In reply to Greg Kroah-Hartman6.12-stable review patch. If anyone has any objections, please let me know.
------------------
From: David Howells <[email protected]>
commit d920270a6dbf756384b125ce39c17666a7c0c9f4 upstream.
Use spin_lock_irq(), not spin_lock_bh() to take the lock when accessing the ->attend_link() to stop a delay in the I/O thread due to an interrupt being taken in the app thread whilst that holds the lock and vice versa.
--- net/rxrpc/io_thread.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-)
net/rxrpc/io_thread.c +4 -4
@@ -482,9 +482,9 @@ int rxrpc_io_thread(void *data)while ((conn =list_first_entry_or_null (&conn_attend_q, struct rxrpc_connection, attend_link))) { -spin_lock_bh (&local->lock); +spin_lock_irq (&local->lock);list_del_init (&conn->attend_link); -spin_unlock_bh (&local->lock); +spin_unlock_irq (&local->lock);rxrpc_input_conn_event (conn,NULL );rxrpc_put_connection (conn, rxrpc_conn_put_poke); }
@@ -501,9 +501,9 @@ int rxrpc_io_thread(void *data)while ((call =list_first_entry_or_null (&call_attend_q, struct rxrpc_call, attend_link))) { -spin_lock_bh (&local->lock); +spin_lock_irq (&local->lock);list_del_init (&call->attend_link); -spin_unlock_bh (&local->lock); +spin_unlock_irq (&local->lock);trace_rxrpc_call_poked (call);rxrpc_input_call_event (call);rxrpc_put_call (call, rxrpc_call_put_poke);
Greg Kroah-Hartman
maintainerPATCH 590/602 rxrpc: Fix locking issues with the peer record hash
In reply to Greg Kroah-Hartman6.12-stable review patch. If anyone has any objections, please let me know.
------------------
From: David Howells <[email protected]>
commit 71f5409176f4ffd460689eb5423a20332d00e342 upstream.
rxrpc_new_incoming_peer() can't use spin_lock_bh() whilst its caller has interrupts disabled.
WARNING: CPU: 0 PID: 1550 at kernel/softirq.c:369 __local_bh_enable_ip+0x46/0xd0
...
Call Trace:
rxrpc_alloc_incoming_call+0x1b0/0x400
rxrpc_new_incoming_call+0x1dd/0x5e0
rxrpc_input_packet+0x84a/0x920
rxrpc_io_thread+0x40d/0xb40
kthread+0x2ec/0x300
ret_from_fork+0x24/0x40
ret_from_fork_asm+0x1a/0x30
</TASK>
irq event stamp: 1811
hardirqs last enabled at (1809): _raw_spin_unlock_irq+0x24/0x50
hardirqs last disabled at (1810): _raw_read_lock_irq+0x17/0x70
softirqs last enabled at (1182): handle_softirqs+0x3ee/0x430
softirqs last disabled at (1811): rxrpc_new_incoming_peer+0x56/0x120Fix this by using a plain spin_lock() instead. IRQs are held, so softirqs can't happen.
--- net/rxrpc/peer_object.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
net/rxrpc/peer_object.c +2 -2
@@ -314,10 +314,10 @@ void rxrpc_new_incoming_peer(struct rxrp hash_key =rxrpc_peer_hash_key (local, &peer->srx);rxrpc_init_peer (local, peer, hash_key); -spin_lock_bh (&rxnet->peer_hash_lock); +spin_lock (&rxnet->peer_hash_lock);hash_add_rcu (rxnet->peer_hash, &peer->hash_link, hash_key);list_add_tail (&peer->keepalive_link, &rxnet->peer_keepalive_new); -spin_unlock_bh (&rxnet->peer_hash_lock); +spin_unlock (&rxnet->peer_hash_lock); }/*
Greg Kroah-Hartman
maintainerPATCH 591/602 wifi: nl80211: fix nl80211_start_radar_detection return value
In reply to Greg Kroah-Hartman6.12-stable review patch. If anyone has any objections, please let me know.
------------------
From: Nicolas Escande <[email protected]>
commit 22159143ff99883667f340998cfbb52b4aaac14c upstream.
Since the wiphy_guard changes, rdev_start_radar_detection's return value in nl80211_start_radar_detection is ignored and we always returned 0.
--- net/wireless/nl80211.c | 37 +++++++++++++++++++------------------ 1 file changed, 19 insertions(+), 18 deletions(-)
net/wireless/nl80211.c +19 -18
@@ -10140,25 +10140,26 @@ static int nl80211_start_radar_detection err =rdev_start_radar_detection (rdev, dev, &chandef, cac_time_ms, link_id); -if (!err) { -switch (wdev->iftype) { -case NL80211_IFTYPE_AP : -case NL80211_IFTYPE_P2P_GO : - wdev->links[0 ].ap.chandef = chandef; -break ; -case NL80211_IFTYPE_ADHOC : - wdev->u.ibss.chandef = chandef; -break ; -case NL80211_IFTYPE_MESH_POINT : - wdev->u.mesh.chandef = chandef; -break ; -default : -break ; - } - wdev->links[link_id].cac_started = true; - wdev->links[link_id].cac_start_time = jiffies; - wdev->links[link_id].cac_time_ms = cac_time_ms; +if (err) +return err; + +switch (wdev->iftype) { +case NL80211_IFTYPE_AP : +case NL80211_IFTYPE_P2P_GO : + wdev->links[0 ].ap.chandef = chandef; +break ; +case NL80211_IFTYPE_ADHOC : + wdev->u.ibss.chandef = chandef; +break ; +case NL80211_IFTYPE_MESH_POINT : + wdev->u.mesh.chandef = chandef; +break ; +default : +break ; } + wdev->links[link_id].cac_started = true; + wdev->links[link_id].cac_start_time = jiffies; + wdev->links[link_id].cac_time_ms = cac_time_ms;return 0 ; }
Greg Kroah-Hartman
maintainerPATCH 592/602 net: ethernet: Remove accidental duplication in Kconfig file
In reply to Greg Kroah-Hartman6.12-stable review patch. If anyone has any objections, please let me know.
------------------
From: Lukas Bulwahn <[email protected]>
commit e2537326e3b6b1bb18f834ebb80b8453c0018883 upstream.
Commit fb3dda82fd38 ("net: airoha: Move airoha_eth driver in a dedicated folder") accidentally added the line:
source "drivers/net/ethernet/mellanox/Kconfig"
in drivers/net/ethernet/Kconfig, so that this line is duplicated in that file.
Remove this accidental duplication.
--- drivers/net/ethernet/Kconfig | 1 - 1 file changed, 1 deletion(-)
drivers/net/ethernet/Kconfig +0 -1
@@ -21,7 +21,6 @@ source "drivers/net/ethernet/adaptec/Kco source "drivers/net/ethernet/aeroflex/Kconfig" source "drivers/net/ethernet/agere/Kconfig" source "drivers/net/ethernet/airoha/Kconfig" -source "drivers/net/ethernet/mellanox/Kconfig" source "drivers/net/ethernet/alacritech/Kconfig" source "drivers/net/ethernet/allwinner/Kconfig" source "drivers/net/ethernet/alteon/Kconfig"
Greg Kroah-Hartman
maintainerPATCH 593/602 afs: Set vllist to NULL if addr parsing fails
In reply to Greg Kroah-Hartman6.12-stable review patch. If anyone has any objections, please let me know.
------------------
From: Edward Adam Davis <[email protected]>
commit 8b3c655fa2406b9853138142746a39b7615c54a2 upstream.
syzbot reported a bug in in afs_put_vlserverlist.
kAFS: bad VL server IP address
BUG: unable to handle page fault for address: fffffffffffffffa ... Oops: Oops: 0002 [#1] SMP KASAN PTI ... RIP: 0010:refcount_dec_and_test include/linux/refcount.h:450 [inline] RIP: 0010:afs_put_vlserverlist+0x3a/0x220 fs/afs/vl_list.c:67 ... Call Trace: <TASK> afs_alloc_cell fs/afs/cell.c:218 [inline] afs_lookup_cell+0x12a5/0x1680 fs/afs/cell.c:264 afs_cell_init+0x17a/0x380 fs/afs/cell.c:386 afs_proc_rootcell_write+0x21f/0x290 fs/afs/proc.c:247 proc_simple_write+0x114/0x1b0 fs/proc/generic.c:825 pde_write fs/proc/inode.c:330 [inline] proc_reg_write+0x23d/0x330 fs/proc/inode.c:342 vfs_write+0x25c/0x1180 fs/read_write.c:682 ksys_write+0x12a/0x240 fs/read_write.c:736 do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline] do_syscall_64+0xcd/0x260 arch/x86/entry/syscall_64.c:94 entry_SYSCALL_64_after_hwframe+0x77/0x7f
Because afs_parse_text_addrs() parses incorrectly, its return value -EINVAL is assigned to vllist, which results in -EINVAL being used as the vllist address when afs_put_vlserverlist() is executed.
Set the vllist value to NULL when a parsing error occurs to avoid this issue.
--- fs/afs/cell.c | 1 + 1 file changed, 1 insertion(+)
fs/afs/cell.c +1 -0
@@ -177,6 +177,7 @@ static struct afs_cell *afs_alloc_cell(s VL_SERVICE, AFS_VL_PORT);if (IS_ERR (vllist)) { ret =PTR_ERR (vllist); + vllist =NULL ; goto parse_failed; }
Greg Kroah-Hartman
maintainerPATCH 594/602 dpll: fix clock quality level reporting
In reply to Greg Kroah-Hartman6.12-stable review patch. If anyone has any objections, please let me know.
------------------
From: Ivan Vecera <[email protected]>
commit 70d99623d5c11e1a9bcc564b8fbad6fa916913d8 upstream.
The DPLL_CLOCK_QUALITY_LEVEL_ITU_OPT1_EPRC is not reported via netlink due to bug in dpll_msg_add_clock_quality_level(). The usage of DPLL_CLOCK_QUALITY_LEVEL_MAX for both DECLARE_BITMAP() and for_each_set_bit() is not correct because these macros requires bitmap size and not the highest valid bit in the bitmap.
Use correct bitmap size to fix this issue.
--- drivers/dpll/dpll_netlink.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
drivers/dpll/dpll_netlink.c +2 -2
@@ -191,8 +191,8 @@ static int dpll_msg_add_clock_quality_level(struct sk_buff *msg, struct dpll_device *dpll, struct netlink_ext_ack *extack) { + DECLARE_BITMAP(qls, DPLL_CLOCK_QUALITY_LEVEL_MAX + 1) = { 0 };const struct dpll_device_ops *ops =dpll_device_ops (dpll); - DECLARE_BITMAP(qls, DPLL_CLOCK_QUALITY_LEVEL_MAX) = { 0 };enum dpll_clock_quality_level ql;int ret;
@@ -201,7 +201,7 @@ dpll_msg_add_clock_quality_level(struct ret = ops->clock_quality_level_get (dpll,dpll_priv (dpll), qls, extack);if (ret)return ret; -for_each_set_bit (ql, qls,DPLL_CLOCK_QUALITY_LEVEL_MAX ) +for_each_set_bit (ql, qls,DPLL_CLOCK_QUALITY_LEVEL_MAX +1 )if (nla_put_u32 (msg,DPLL_A_CLOCK_QUALITY_LEVEL , ql))return -EMSGSIZE ;
Greg Kroah-Hartman
maintainerPATCH 595/602 afs: Fix delayed allocation of a cells anonymous key
In reply to Greg Kroah-Hartman6.12-stable review patch. If anyone has any objections, please let me know.
------------------
From: David Howells <[email protected]>
commit d27c71257825dced46104eefe42e4d9964bd032e upstream.
The allocation of a cell's anonymous key is done in a background thread along with other cell setup such as doing a DNS upcall. In the reported bug, this is triggered by afs_parse_source() parsing the device name given to mount() and calling afs_lookup_cell() with the name of the cell.
The normal key lookup then tries to use the key description on the anonymous authentication key as the reference for request_key() - but it may not yet be set and so an oops can happen.
This has been made more likely to happen by the fix for dynamic lookup failure.
Fix this by firstly allocating a reference name and attaching it to the afs_cell record when the record is created. It can share the memory allocation with the cell name (unfortunately it can't just overlap the cell name by prepending it with "afs@" as the cell name already has a '.' prepended for other purposes). This reference name is then passed to request_key().
Secondly, the anon key is now allocated on demand at the point a key is requested in afs_request_key() if it is not already allocated. A mutex is used to prevent multiple allocation for a cell.
Thirdly, make afs_request_key_rcu() return NULL if the anonymous key isn't yet allocated (if we need it) and then the caller can return -ECHILD to drop out of RCU-mode and afs_request_key() can be called.
Note that the anonymous key is kind of necessary to make the key lookup cache work as that doesn't currently cache a negative lookup, but it's probably worth some investigation to see if NULL can be used instead.
--- fs/afs/cell.c | 43 ++++++++----------------------------------- fs/afs/internal.h | 1 + fs/afs/security.c | 48 ++++++++++++++++++++++++++++++++++++++++-------- 3 files changed, 49 insertions(+), 43 deletions(-)
fs/afs/cell.c +8 -35
@@ -140,7 +140,9 @@ static struct afs_cell *afs_alloc_cell(sreturn ERR_PTR (-ENOMEM ); } - cell->name =kmalloc (1 + namelen +1 ,GFP_KERNEL ); +/* Allocate the cell name and the key name in one go. */ + cell->name =kmalloc (1 + namelen +1 + +4 + namelen +1 ,GFP_KERNEL );if (!cell->name) {kfree (cell);return ERR_PTR (-ENOMEM );
@@ -151,7 +153,11 @@ static struct afs_cell *afs_alloc_cell(s cell->name_len = namelen;for (i =0 ; i < namelen; i++) cell->name[i] =tolower (name[i]); - cell->name[i] =0 ; + cell->name[i++] =0 ; + + cell->key_desc = cell->name + i; +memcpy (cell->key_desc,"afs@" ,4 ); +memcpy (cell->key_desc +4 , cell->name, cell->name_len +1 ); cell->net = net;refcount_set (&cell->ref,1 );
@@ -719,33 +725,6 @@ void afs_set_cell_timer(struct afs_cell }/* -* Allocate a key to use as a placeholder for anonymous user security. -*/ -static int afs_alloc_anon_key (struct afs_cell *cell) -{ -struct key *key; -char keyname[4 +AFS_MAXCELLNAME +1 ], *cp, *dp; - -/* Create a key to represent an anonymous user. */ -memcpy (keyname,"afs@" ,4 ); - dp = keyname +4 ; - cp = cell->name; -do { - *dp++ =tolower (*cp); - }while (*cp++); - - key =rxrpc_get_null_key (keyname); -if (IS_ERR (key)) -return PTR_ERR (key); - - cell->anonymous_key = key; - -_debug ("anon key %p{%x}" , - cell->anonymous_key,key_serial (cell->anonymous_key)); -return 0 ; -} - -/* * Activate a cell. */ static int afs_activate_cell (struct afs_net *net,struct afs_cell *cell)
@@ -754,12 +733,6 @@ static int afs_activate_cell(struct afs_struct afs_cell *pcell;int ret; -if (!cell->anonymous_key) { - ret =afs_alloc_anon_key (cell); -if (ret <0 ) -return ret; - } - ret =afs_proc_cell_setup (cell);if (ret <0 )return ret;
fs/afs/internal.h +1 -0
@@ -423,6 +423,7 @@ struct afs_cell {u8 name_len;/* Length of name */ char *name;/* Cell name, case-flattened and NUL-padded */ +char *key_desc;/* Authentication key description */ };/*
fs/afs/security.c +40 -8
87 lines not on this page · raw message
Greg Kroah-Hartman
maintainerPATCH 596/602 afs: handle CB.InitCallBackState3 requests without a server record
In reply to Greg Kroah-Hartman6.12-stable review patch. If anyone has any objections, please let me know.
------------------
From: Nan Li <[email protected]>
commit f3cf725cd284b7912d5522babb44721bf38c8887 upstream.
The cache manager callback path now attaches the server record to an incoming call through the rxrpc peer's app data. That association is not guaranteed to exist for every callback request, and most callback handlers already tolerate that case.
Make CB.InitCallBackState3 follow the same pattern by checking whether a server record was attached before using it. If the peer is not mapped to a server record, trace the request and ignore it, matching the existing behaviour for other unmatched callback requests.
This keeps the callback handler consistent with the rest of the cache manager service and avoids depending on peer state that may not be available for a given request.
--- fs/afs/cmservice.c | 5 +++++ 1 file changed, 5 insertions(+)
fs/afs/cmservice.c +5 -0
@@ -369,6 +369,11 @@ static int afs_deliver_cb_init_call_backreturn 0 ; } +if (!call->server) { +trace_afs_cm_no_server_u (call, call->request); +return 0 ; + } +if (memcmp (call->request, &call->server->_uuid,sizeof (call->server->_uuid)) !=0 ) {pr_notice ("Callback UUID does not match fileserver UUID\n" );trace_afs_cm_no_server_u (call, call->request);
Greg Kroah-Hartman
maintainerPATCH 597/602 Bluetooth: hci_conn: Fix running bis_cleanup for hci_conn->type PA_LINK
In reply to Greg Kroah-Hartman6.12-stable review patch. If anyone has any objections, please let me know.
------------------
From: Luiz Augusto von Dentz <[email protected]>
commit d36349ea73d805bb72cbc24ab90cb1da4ad5c379 upstream.
Connections with type of PA_LINK shall be considered temporary just to track the lifetime of PA Sync setup, once the BIG Sync is established and connection are created with BIS_LINK the existing PA_LINK connection shall not longer use bis_cleanup otherwise it terminates the PA Sync when that shall be left to BIS_LINK connection to do it.
--- net/bluetooth/hci_conn.c | 10 +++++++++- net/bluetooth/hci_event.c | 7 ++++++- 2 files changed, 15 insertions(+), 2 deletions(-)
net/bluetooth/hci_conn.c +9 -1
@@ -830,7 +830,15 @@ static void bis_cleanup(struct hci_conn/* Check if ISO connection is a BIS and terminate advertising * set and BIG if there are no other connections using it. */ - bis =hci_conn_hash_lookup_big (hdev, conn->iso_qos.bcast.big); + bis =hci_conn_hash_lookup_big_state (hdev, + conn->iso_qos.bcast.big, +BT_CONNECTED ); +if (bis) +return ; + + bis =hci_conn_hash_lookup_big_state (hdev, + conn->iso_qos.bcast.big, +BT_CONNECT );if (bis)return ;
net/bluetooth/hci_event.c +6 -1
@@ -7026,9 +7026,14 @@ static void hci_le_big_sync_established_continue ; } -if (ev->status !=0x42 ) +if (ev->status !=0x42 ) {/* Mark PA sync as established */ set_bit (HCI_CONN_PA_SYNC , &bis->flags); +/* Reset cleanup callback of PA Sync so it doesn't +* terminate the sync when deleting the connection. +*/ + conn->cleanup =NULL ; + } bis->sync_handle = conn->sync_handle; bis->iso_qos.bcast.big = ev->handle;
Re: [PATCH 6.12 597/602] Bluetooth: hci_conn: Fix running bis_cleanup for hci_conn->type PA_LINK
Hi Greg,
Quoted 30 lines · Greg Kroah-Hartman
6.12-stable review patch. If anyone has any objections, please let me know.
------------------
From: Luiz Augusto von Dentz <[email protected]>
commit
d36349ea73d805bb72cbc24ab90cb1da4ad5c379upstream.Connections with type of
PA_LINKshall be considered temporary just to track the lifetime of PA Sync setup, once the BIG Sync is established and connection are created withBIS_LINKthe existingPA_LINKconnection shall not longer usebis_cleanupotherwise it terminates the PA Sync when that shall be left toBIS_LINKconnection to do it.Fixes a7bcffc673de ("Bluetooth: Add PA_LINK to distinguish BIG sync and PA sync connections")Signed-off-by Luiz Augusto von Dentz <[email protected]>Signed-off-by Greg Kroah-Hartman <[email protected]>--- net/bluetooth/hci_conn.c | 10 +++++++++- net/bluetooth/hci_event.c | 7 ++++++- 2 files changed, 15 insertions(+), 2 deletions(-)net/bluetooth/hci_conn.c +1
-1@@ -830,7 +830,15 @@ static void bis_cleanup(struct hci_conn/* Check if ISO connection is a BIS and terminate advertising * set and BIG if there are no other connections using it. */ - bis =hci_conn_hash_lookup_big (hdev, conn->iso_qos.bcast.big); + bis = hci_conn_hash_lookup_big_state(hdev,
net/bluetooth/hci_conn.c static void bis_cleanup(struct hci_conn · line 843
Quoted 10 lines
net/bluetooth/hci_conn.c +8
-0+ conn->iso_qos.bcast.big, + BT_CONNECTED); +if (bis) +return ; + + bis =hci_conn_hash_lookup_big_state (hdev, + conn->iso_qos.bcast.big, +BT_CONNECT );if (bis)return ;
I have run an AI assisted backport review and it spotted an issue. I have taken a look, and the two BIG-state lookups lost an upstream role restriction.
Upstream d36349ea73d8 has:
hci_conn_hash_lookup_big_state(hdev, big, BT_CONNECTED,
HCI_ROLE_MASTER);
and the same HCI_ROLE_MASTER restriction for BT_CONNECT.
The 6.12.y backport calls the older three-argument helper:
hci_conn_hash_lookup_big_state(hdev, big, BT_CONNECTED);
That helper accepts either role. The 6.12 tree also creates slave-role BIS connections during BIG Sync establishment, so a slave BIS with the same BIG handle and state can satisfy this lookup and suppress cleanup of the unrelated master BIG.
I think 6.12.y misses commit b2a5f2e1c127
("Bluetooth: hci_event: Add support for handling LE BIG Sync Lost
event"), which adds the role-aware helper and updates its callers, so we might want to apply this as well and then reapply this ?
thanks,
Harshit> --- a/net/bluetooth/hci_event.c
Quoted 20 lines
net/bluetooth/hci_conn.c +7
-1+++ b/net/bluetooth/hci_event.c@@ -7026,9 +7026,14 @@ static void hci_le_big_sync_established_continue ; } -if (ev->status !=0x42 ) +if (ev->status !=0x42 ) {/* Mark PA sync as established */ set_bit (HCI_CONN_PA_SYNC , &bis->flags); +/* Reset cleanup callback of PA Sync so it doesn't +* terminate the sync when deleting the connection. +*/ + conn->cleanup =NULL ; + } bis->sync_handle = conn->sync_handle; bis->iso_qos.bcast.big = ev->handle;
Greg Kroah-Hartman
maintainerPATCH 598/602 Bluetooth: hci_conn: Fix not cleaning up Broadcaster/Broadcast Source
In reply to Greg Kroah-Hartman6.12-stable review patch. If anyone has any objections, please let me know.
------------------
From: Luiz Augusto von Dentz <[email protected]>
commit 3ba486c5f3ce2c22ffd29c0103404cdbe21912b3 upstream.
This fixes Broadcaster/Broadcast Source not sending HCI_OP_LE_TERM_BIG because HCI_CONN_PER_ADV where not being set.
--- net/bluetooth/hci_conn.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
net/bluetooth/hci_conn.c +1 -1
@@ -2277,7 +2277,7 @@ struct hci_conn *hci_connect_bis(struct* the start periodic advertising and create BIG commands have * been queued */ -hci_conn_hash_list_state (hdev, bis_mark_per_adv,PA_LINK , +hci_conn_hash_list_state (hdev, bis_mark_per_adv,BIS_LINK ,BT_BOUND , &data);/* Queue start periodic advertising and create BIG */
Greg Kroah-Hartman
maintainerPATCH 599/602 Bluetooth: hci_conn: Fix not cleaning up PA_LINK connections
In reply to Greg Kroah-Hartman6.12-stable review patch. If anyone has any objections, please let me know.
------------------
From: Luiz Augusto von Dentz <[email protected]>
commit 41bf23338a501e745c398e0faee948dd05d0be98 upstream.
Contrary to what was stated on d36349ea73d8 ("Bluetooth: hci_conn:
Fix running bis_cleanup for hci_conn->type PA_LINK") the PA_LINK does in fact needs to run bis_cleanup in order to terminate the PA Sync, since that is bond to the listening socket which is the entity that controls the lifetime of PA Sync, so if it is closed/released the PA Sync shall be terminated, terminating the PA Sync shall not result in the BIG Sync being terminated since once the later is established it doesn't depend on the former anymore.
If the use user wants to reconnect/rebind a number of BIS(s) it shall keep the socket open until it no longer needs the PA Sync, which means it retains full control of the lifetime of both PA and BIG Syncs.
--- net/bluetooth/hci_conn.c | 33 +++++++++++++++++++-------------- net/bluetooth/hci_event.c | 7 +------ net/bluetooth/hci_sync.c | 2 +- 3 files changed, 21 insertions(+), 21 deletions(-)
net/bluetooth/hci_conn.c +19 -14
@@ -770,21 +770,23 @@ static void find_bis(struct hci_conn *co d->count++; } -static int hci_le_big_terminate (struct hci_dev *hdev,u8 big,struct hci_conn *conn) +static int hci_le_big_terminate (struct hci_dev *hdev,struct hci_conn *conn) {struct iso_list_data *d;int ret; -bt_dev_dbg (hdev,"big 0x%2.2x sync_handle 0x%4.4x" , big, conn->sync_handle); +bt_dev_dbg (hdev,"hcon %p big 0x%2.2x sync_handle 0x%4.4x" , conn, + conn->iso_qos.bcast.big, conn->sync_handle); d =kzalloc (sizeof (*d),GFP_KERNEL );if (!d)return -ENOMEM ; - d->big = big; + d->big = conn->iso_qos.bcast.big; d->sync_handle = conn->sync_handle; -if (test_and_clear_bit (HCI_CONN_PA_SYNC , &conn->flags)) { +if (conn->type ==PA_LINK && +test_and_clear_bit (HCI_CONN_PA_SYNC , &conn->flags)) {hci_conn_hash_list_flag (hdev, find_bis,PA_LINK ,HCI_CONN_PA_SYNC , d);
@@ -802,6 +804,9 @@ static int hci_le_big_terminate(struct h d->big_sync_term = true; } +if (!d->pa_sync_term && !d->big_sync_term) +return 0 ; + ret =hci_cmd_sync_queue (hdev, big_terminate_sync, d, terminate_big_destroy);if (ret)
@@ -844,8 +849,7 @@ static void bis_cleanup(struct hci_connhci_le_terminate_big (hdev, conn); }else { -hci_le_big_terminate (hdev, conn->iso_qos.bcast.big, - conn); +hci_le_big_terminate (hdev, conn); } }
@@ -988,19 +992,20 @@ static struct hci_conn *__hci_conn_add(s conn->mtu = hdev->le_mtu ? hdev->le_mtu : hdev->acl_mtu;break ;case CIS_LINK : -case BIS_LINK : -case PA_LINK :/* conn->src should reflect the local identity address */ hci_copy_identity_address (hdev, &conn->src, &conn->src_type); -/* set proper cleanup function */ -if (!bacmp (dst,BDADDR_ANY )) - conn->cleanup = bis_cleanup; -else if (conn->role ==HCI_ROLE_MASTER ) +if (conn->role ==HCI_ROLE_MASTER ) conn->cleanup = cis_cleanup; - conn->mtu = hdev->iso_mtu ? hdev->iso_mtu : - hdev->le_mtu ? hdev->le_mtu : hdev->acl_mtu; + conn->mtu = hdev->iso_mtu; +break ; +case PA_LINK : +case BIS_LINK : +/* conn->src should reflect the local identity address */ +hci_copy_identity_address (hdev, &conn->src, &conn->src_type); + conn->cleanup = bis_cleanup; + conn->mtu = hdev->iso_mtu;break ;case SCO_LINK :if (lmp_esco_capable (hdev))
net/bluetooth/hci_event.c +1 -6
@@ -7026,14 +7026,9 @@ static void hci_le_big_sync_established_continue ; } -if (ev->status !=0x42 ) { +if (ev->status !=0x42 )/* Mark PA sync as established */ set_bit (HCI_CONN_PA_SYNC , &bis->flags); -/* Reset cleanup callback of PA Sync so it doesn't -* terminate the sync when deleting the connection. -*/ - conn->cleanup =NULL ; - } bis->sync_handle = conn->sync_handle; bis->iso_qos.bcast.big = ev->handle;
net/bluetooth/hci_sync.c +1 -1
@@ -7150,7 +7150,7 @@ static void create_pa_complete(struct hchci_dev_lock (hdev); -if (!hci_conn_valid (hdev, conn)) +if (hci_conn_valid (hdev, conn))clear_bit (HCI_CONN_CREATE_PA_SYNC , &conn->flags);if (!err)
Greg Kroah-Hartman
maintainerPATCH 600/602 Bluetooth: hci_conn: Fix memory leak in hci_le_big_terminate()
In reply to Greg Kroah-Hartman6.12-stable review patch. If anyone has any objections, please let me know.
------------------
From: Pavitra Jha <[email protected]>
commit bfa9d28960ed677d556bdf097073bc3129686229 upstream.
hci_le_big_terminate() allocates iso_list_data via kzalloc_obj but returns 0 without freeing it when neither pa_sync_term nor big_sync_term flags are set after evaluating the PA and BIG sync connection state.
This early-return path was introduced when hci_le_big_terminate() was refactored to take struct hci_conn instead of raw u8 parameters, adding PA/BIG flag evaluation logic. The existing kfree() on hci_cmd_sync_queue failure does not cover this path.
--- net/bluetooth/hci_conn.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-)
net/bluetooth/hci_conn.c +3 -1
@@ -804,8 +804,10 @@ static int hci_le_big_terminate(struct h d->big_sync_term = true; } -if (!d->pa_sync_term && !d->big_sync_term) +if (!d->pa_sync_term && !d->big_sync_term) { +kfree (d);return 0 ; + } ret =hci_cmd_sync_queue (hdev, big_terminate_sync, d, terminate_big_destroy);
Greg Kroah-Hartman
maintainerPATCH 601/602 afs: Fix uninit var in afs_alloc_anon_key()
In reply to Greg Kroah-Hartman6.12-stable review patch. If anyone has any objections, please let me know.
------------------
From: David Howells <[email protected]>
commit 19eef1d98eeda3745df35839190b7d4a4adea656 upstream.
Fix an uninitialised variable (key) in afs_alloc_anon_key() by setting it to cell->anonymous_key. Without this change, the error check may return a false failure with a bad error number.
Most of the time this is unlikely to happen because the first encounter with afs_alloc_anon_key() will usually be from (auto)mount, for which all subsequent operations must wait - apart from other (auto)mounts. Once the call->anonymous_key is allocated, all further calls to afs_request_key() will skip the call to afs_alloc_anon_key() for that cell.
--- fs/afs/security.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)
fs/afs/security.c +2 -1
@@ -26,7 +26,8 @@ static int afs_alloc_anon_key(struct afsstruct key *key;mutex_lock (&afs_key_lock); -if (!cell->anonymous_key) { + key = cell->anonymous_key; +if (!key) { key =rxrpc_get_null_key (cell->key_desc);if (!IS_ERR (key)) cell->anonymous_key = key;
Greg Kroah-Hartman
maintainerPATCH 602/602 KVM: SVM: Bump asid_generation on CPU online to avoid ASID collision after hotplug
In reply to Greg Kroah-Hartman6.12-stable review patch. If anyone has any objections, please let me know.
------------------
From: Nikunj A Dadhania <[email protected]>
commit 25f744ffa0c8e799e06250ce2e618367b166b0d4 upstream.
If a vCPU stays scheduled out (or blocked) while the last pCPU it ran on goes through a hotplug cycle (online->offline->online), and the vCPU then resumes execution on the same pCPU, then it is possible for it to run with an ASID that has now been assigned to a different vCPU, resulting in stale TLB translations being used.
svm_enable_virtualization_cpu() resets asid_generation to 1 and sets next_asid to max_asid + 1 on every CPU online event, including hotplug cycles. Because next_asid starts beyond the pool boundary, the first call to new_asid() after an online event always wraps the pool, incrementing asid_generation to 2 and assigning ASIDs starting from min_asid.
Consider two vCPUs from different VMs, vCPU-A pinned to CPU-X holding asid_generation=2 and ASID=N from before the hotplug event:
1. CPU-X goes offline and back online: asid_generation resets to 1, next_asid = max_asid + 1.
2. One or more vCPUs migrate to CPU-X and call new_asid(), wrapping the pool and consuming ASIDs starting from min_asid. Eventually vCPU-B from a different VM is assigned asid_generation=2, ASID=N — the same ASID that vCPU-A held before the hotplug.
3. vCPU-A enters pre_svm_run() on CPU-X: current_vmcb->cpu is unchanged so the migration branch is skipped. Its saved asid_generation=2 matches sd->asid_generation=2, so the generation check silently passes and vCPU-A continues running with ASID=N — the same ASID just freshly assigned to vCPU-B.
Both vCPUs from different VMs now run on CPU-X with the same ASID, causing them to share NPT TLB entries and producing stale translations.
The collision manifests as a KVM internal error (Suberror: 1, emulation failure). The NPT page fault reports a faulting GPA far outside the VM's physical memory range — a sign of stale TLB translations being used. KVM falls back to instruction emulation, which fails on FPU/XSave instructions (XRSTOR, STMXCSR) that the emulator does not implement.
Fix this by incrementing asid_generation instead of resetting it to 1 in svm_enable_virtualization_cpu(). On module load, asid_generation starts at 0 (memset) and the increment produces 1, identical to the old behaviour. On subsequent hotplug cycles the generation advances beyond any value a vCPU previously observed on this CPU, so the generation check in pre_svm_run() reliably forces new_asid() on every vCPU after every hotplug cycle.
Message-ID: <[email protected]>
--- arch/x86/kvm/svm/svm.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-)
arch/x86/kvm/svm/svm.c +6 -1
@@ -626,7 +626,12 @@ static int svm_enable_virtualization_cpureturn -EBUSY ; sd =per_cpu_ptr (&svm_data, me); - sd->asid_generation =1 ; +/* +* Bump the current asid_generation value to ensure any vCPU that +* previously ran on this CPU sees a stale generation and is forced +* to acquire a new ASID, preventing a latent ASID collision. +*/ + sd->asid_generation++; sd->max_asid =cpuid_ebx (SVM_CPUID_FUNC ) -1 ; sd->next_asid = sd->max_asid +1 ; sd->min_asid = max_sev_asid +1 ;
Quoted 9 lines · Greg Kroah-Hartman
This is the start of the stable review cycle for the 6.12.101 release. There are 602 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.
Responses should be made by Sat, 01 Aug 2026 14:13:43 +0000. Anything received after that time might be too late.
The whole patch series can be found in one patch at:
Quoted 8 lines
https://www.kernel.org/pub/linux/kernel/v6.x/stable-review/patch-6.12.101-rc1.gzor in the git tree and branch at:
git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.gitlinux-6.12.y
and the diffstat can be found below.thanks,
greg k-h
On ARCH_BRCMSTB using 32-bit and 64-bit ARM kernels, build tested on BMIPS_GENERIC:
Signature · 1 line
Florian
Quoted 8 lines · On Thu, 30 Jul 2026 16:06:32 +0200 Greg Kroah-Hartman…
This is the start of the stable review cycle for the 6.12.101 release. There are 602 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.
Responses should be made by Sat, 01 Aug 2026 14:13:43 +0000. Anything received after that time might be too late.
Boot-tested under QEMU for Rust x86_64, arm64 and riscv64; built-tested for loongarch64:
Thanks!
Cheers,
Miguel
Am 30.07.2026 um 16:06 schrieb Greg Kroah-Hartman:
Quoted 4 lines
This is the start of the stable review cycle for the 6.12.101 release. There are 602 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.
Builds, boots and works on my 2-socket Ivy Bridge Xeon E5-2697 v2 server. No dmesg oddities or regressions found.
Beste Grüße,
Peter Schneider
Signature · 8 lines
Climb the mountain not to plant your flag, but to embrace the challenge, enjoy the air and behold the view. Climb it so you can see the world, not so the world can see you. -- David McCullough Jr. OpenPGP: 0xA3828BD796CCE11A8CADE8866E3A92C92C3FF244 Download: https://www.peters-netzplatz.de/download/pschneider1968_pub.asc https://keys.mailvelope.com/pks/lookup?op=get&[email protected] https://keys.mailvelope.com/pks/lookup?op=get&[email protected]
# Librecast Test Results
020/020 [ OK ] liblcrq
010/010 [ OK ] libmld
120/120 [ OK ] liblibrecast
CPU/kernel: Linux auntie 6.12.101-rc1-gfdd6287bb54f #1 SMP PREEMPT_DYNAMIC Thu Jul 30 19:54:24 -00 2026 x86_64 AMD Ryzen 9 9950X 16-Core Processor AuthenticAMD GNU/Linux
Quoted 9 lines · Greg Kroah-Hartman
This is the start of the stable review cycle for the 6.12.101 release. There are 602 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.
Responses should be made by Sat, 01 Aug 2026 14:13:43 +0000. Anything received after that time might be too late.
The whole patch series can be found in one patch at:
Quoted 9 lines
https://www.kernel.org/pub/linux/kernel/v6.x/stable-review/patch-6.12.101-rc1.gzor in the git tree and branch at:
git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.gitlinux-6.12.y
and the diffstat can be found below.thanks,
greg k-h
Compiled and booted on my test system. No dmesg regressions.
thanks,
-- Shuah
Hi!
Quoted 4 lines
This is the start of the stable review cycle for the 6.12.101 release. There are 602 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.
CIP testing did not find any problems here:
https://gitlab.com/cip-project/cip-testing/linux-stable-rc-ci/-/tree/linux-6.1.y
Best regards,
Pavel
Quoted 4 lines · Greg Kroah-Hartman
This is the start of the stable review cycle for the 6.12.101 release. There are 602 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.
Hi Greg,
Quoted 8 lines · Greg Kroah-Hartman
This is the start of the stable review cycle for the 6.12.101 release. There are 602 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.
Responses should be made by Sat, 01 Aug 2026 14:13:43 +0000. Anything received after that time might be too late.
No problems seen on x86_64 and aarch64 with our testing.
Have responded to few patches where AI reported problems with backports. I have 4 more reports, will review and report them soon.
Thanks,
Harshit
Quoted 9 lines
The whole patch series can be found in one patch at:
https://www.kernel.org/pub/linux/kernel/v6.x/stable-review/patch-6.12.101-rc1.gzor in the git tree and branch at:
git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.gitlinux-6.12.y
and the diffstat can be found below.thanks,
greg k-h
Quoted 9 lines · Greg Kroah-Hartman
This is the start of the stable review cycle for the 6.12.101 release. There are 602 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.
Responses should be made by Sat, 01 Aug 2026 14:13:43 +0000. Anything received after that time might be too late.
The whole patch series can be found in one patch at:
Quoted 8 lines
https://www.kernel.org/pub/linux/kernel/v6.x/stable-review/patch-6.12.101-rc1.gzor in the git tree and branch at:
git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.gitlinux-6.12.y
and the diffstat can be found below.thanks,
greg k-h
Built and booted successfully on RISC-V RV64 (HiFive Unmatched).