hw/sd/sdhci: model the i.MX uSDHC clock, reset values and DMA boundary
PATCH 1/1 hw/sd/sdhci: model the i.MX uSDHC clock, reset values and DMA boundary
The i.MX uSDHC differs from the Freescale eSDHC that this file already models in three ways that a vendor U-Boot depends on.
Clock enables. The classic eSDHC keeps them in SYSCTL. The uSDHC moved them to VENDOR_SPEC bits 11-14. Teach SDHC_CLOCK_IS_ON() about the VENDOR_SPEC enable.
Interrupt status enables. Unlike the SD Host Controller standard, the eSDHC does not reset these to zero, which commit d060b2789f7 already models for fsl-esdhc-be/le. The uSDHC behaves the same way.
SDMA buffer boundary. The uSDHC's internal DMA has none; it transfers the whole programmed block count and reports only Transfer Complete.
Signed-off-by Pablo Mazzini <[email protected]>
--- hw/sd/sdhci-internal.h | 7 +++++-- hw/sd/sdhci.c | 14 ++++++++++++-- 2 files changed, 17 insertions(+), 4 deletions(-)
hw/sd/sdhci-internal.h +5 -2
@@ -124,8 +124,11 @@ FIELD(SDHC_PWRCON, BUS_VOLTAGE, 1, 3);#define SDHC_CLOCK_INT_EN 0x0001#define SDHC_CLOCK_SDCLK_EN (1 << 2)#define SDHC_CLOCK_CHK_MASK 0x0007 -#define SDHC_CLOCK_IS_ON (x) \ - (((x) & SDHC_CLOCK_CHK_MASK) == SDHC_CLOCK_CHK_MASK) +/* The i.MX uSDHC keeps its clock enables in VENDOR_SPEC instead */ +#define ESDHC_CKEN (1 << 14) +#define SDHC_CLOCK_IS_ON (clkcon, vendor_spec) \ + ((((clkcon) & SDHC_CLOCK_CHK_MASK) == SDHC_CLOCK_CHK_MASK) \ + || ((vendor_spec) & ESDHC_CKEN))/* R/W Timeout Control Register 0x0 */ #define SDHC_TIMEOUTCON 0x2E
hw/sd/sdhci.c +12 -2
@@ -308,7 +308,8 @@ static void sdhci_reset(SDHCIState *s) s->stopped_state = sdhc_not_stopped; s->pending_insert_state = false;if (object_dynamic_cast (OBJECT (s),TYPE_FSL_ESDHC_BE ) || -object_dynamic_cast (OBJECT (s),TYPE_FSL_ESDHC_LE )) { +object_dynamic_cast (OBJECT (s),TYPE_FSL_ESDHC_LE ) || +object_dynamic_cast (OBJECT (s),TYPE_IMX_USDHC )) { s->norintstsen =0x013f ; s->errintstsen =0x117f ; }
@@ -619,6 +620,15 @@ static void sdhci_sdma_transfer_multi_blocks(SDHCIState *s) page_aligned = true; } +/* +* The i.MX uSDHC has no "Host SDMA Buffer Boundary": its internal DMA +* transfers the whole programmed block count and reports only Transfer +* Complete, so it never pauses at a boundary. +*/ +if (object_dynamic_cast (OBJECT (s),TYPE_IMX_USDHC )) { + page_aligned = false; + } + s->prnsts |=SDHC_DATA_INHIBIT |SDHC_DAT_LINE_ACTIVE ;if (s->trnmod &SDHC_TRNS_READ ) { s->prnsts |=SDHC_DOING_READ ;
@@ -994,7 +1004,7 @@ static void sdhci_data_transfer(void *opaque)static bool sdhci_can_issue_command (SDHCIState *s) { - if (!SDHC_CLOCK_IS_ON(s->clkcon) || + if (!SDHC_CLOCK_IS_ON(s->clkcon, s->vendor_spec) || (((s->prnsts & SDHC_DATA_INHIBIT) || s->stopped_state) && ((s->cmdreg & SDHC_CMD_DATA_PRESENT) || ((s->cmdreg & SDHC_CMD_RESPONSE) == SDHC_CMD_RSP_WITH_BUSY &&
Signature · 1 line
2.53.0