Skip to contentSkip to conversation

FAILED: patch "[PATCH] media: imx219: Fix maximum frame length in lines" failed to apply to 6.6-stable tree

PATCH New [email protected] 2 participants 8 messages Jul 29 – Aug 4

Subsystems (4)
lore
Share & tools
lore

[email protected]

author maintainer
#0 lore raw

The patch below does not apply to the 6.6-stable tree.
If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <[email protected]>.

To reproduce the conflict and resubmit, you may use the following commands:

git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-6.6.y
git checkout FETCH_HEAD
git cherry-pick -x 2c4f1ba7354312ad2d6e34e70a518a51a9344715
# <resolve conflicts, build, test, etc.>
git commit -s
git send-email --to '<[email protected]>' --in-reply-to '2026072955-retouch-favorably-ee17@gregkh' --subject-prefix 'PATCH 6.6.y' 'HEAD^..'

Possible dependencies:

thanks,

greg k-h

------------------ original commit in Linus's tree ------------------

From 2c4f1ba7354312ad2d6e34e70a518a51a9344715 Mon Sep 17 00:00:00 2001
From: Sakari Ailus <[email protected]>
Date: Sat, 21 Feb 2026 01:38:15 +0200
Subject: [PATCH] media: imx219: Fix maximum frame length in lines

The driver used the maximum frame length in lines value of 0xffff, but the maximum appears to be 0xfffe instead. Fix it.

Fixes 1283b3b8f82b ("media: i2c: Add driver for Sony IMX219 sensor")
drivers/media/i2c/imx219.c +1 -1
index a09699299b4e..0b9ff639e9f7 100644
@@ -72,7 +72,7 @@
 
 /* V_TIMING internal */
 #define IMX219_REG_FRM_LENGTH_A		CCI_REG16(0x0160)
-#define IMX219_FLL_MAX			0xffff
+#define IMX219_FLL_MAX			0xfffe
 #define IMX219_VBLANK_MIN		32
 #define IMX219_REG_LINE_LENGTH_A	CCI_REG16(0x0162)
 #define IMX219_LLP_MIN			0x0d78
maintainer
#1 lore raw

PATCH 1/7 media: i2c: imx219: Access height from active format in imx219_set_ctrl

From: Laurent Pinchart <[email protected]>

[ Upstream commit aa86ac42eec4dd7e987c12390a0a487187e2d9ae ]

Use the active format height instead of the mode height in imx219_set_ctrl(). This prepares for dropping the mode field from the imx219 structure.

The state is retrieved using v4l2_subdev_get_locked_active_state() as the subdev active state and the control handler share the same lock.

Stable-dep-of: 2c4f1ba73543 ("media: imx219: Fix maximum frame length in lines")

---
 drivers/media/i2c/imx219.c | 9 +++++++--
 1 file changed, 7 insertions(+), 2 deletions(-)
drivers/media/i2c/imx219.c +7 -2
index 03cbacd77a804..64c4d2d538bd1 100644
@@ -500,13 +500,18 @@ static int imx219_set_ctrl(struct v4l2_ctrl *ctrl)
 	struct imx219 *imx219 =
 		container_of(ctrl->handler, struct imx219, ctrl_handler);
 	struct i2c_client *client = v4l2_get_subdevdata(&imx219->sd);
+	const struct v4l2_mbus_framefmt *format;
+	struct v4l2_subdev_state *state;
 	int ret = 0;
 
+	state = v4l2_subdev_get_locked_active_state(&imx219->sd);
+	format = v4l2_subdev_get_pad_format(&imx219->sd, state, 0);
+
 	if (ctrl->id == V4L2_CID_VBLANK) {
 		int exposure_max, exposure_def;
 
 		/* Update max exposure while meeting expected vblanking */
-		exposure_max = imx219->mode->height + ctrl->val - 4;
+		exposure_max = format->height + ctrl->val - 4;
 		exposure_def = (exposure_max < IMX219_EXPOSURE_DEFAULT) ?
 			exposure_max : IMX219_EXPOSURE_DEFAULT;
 		__v4l2_ctrl_modify_range(imx219->exposure,
@@ -546,7 +551,7 @@ static int imx219_set_ctrl(struct v4l2_ctrl *ctrl)
 		break;
 	case V4L2_CID_VBLANK:
 		cci_write(imx219->regmap, IMX219_REG_VTS,
-			  imx219->mode->height + ctrl->val, &ret);
+			  format->height + ctrl->val, &ret);
 		break;
 	case V4L2_CID_TEST_PATTERN_RED:
 		cci_write(imx219->regmap, IMX219_REG_TESTP_RED,
Signature · 1 line
2.53.0
maintainer
#2 lore raw

PATCH 2/7 media: i2c: imx219: Don't store the current mode in the imx219 structure

From: Laurent Pinchart <[email protected]>

[ Upstream commit e3e5d172d5fce9151bc101427554a158d4759856 ]

The mode field of the imx219 structure is only used in imx219_init_controls(), after the probe function sets it to point to the default mode. Use the default mode directly when initializing controls, and drop the mode field from the imx219 structure.

Stable-dep-of: 2c4f1ba73543 ("media: imx219: Fix maximum frame length in lines")

---
 drivers/media/i2c/imx219.c | 13 +++++++------
 1 file changed, 7 insertions(+), 6 deletions(-)
drivers/media/i2c/imx219.c +7 -6
index 64c4d2d538bd1..c34a8bb5854ad 100644
@@ -1067,8 +1067,8 @@ static unsigned long imx219_get_pixel_rate(struct imx219 *imx219)
 static int imx219_init_controls(struct imx219 *imx219)
 {
 	struct i2c_client *client = v4l2_get_subdevdata(&imx219->sd);
+	const struct imx219_mode *mode = &supported_modes[0];
 	struct v4l2_ctrl_handler *ctrl_hdlr;
-	unsigned int height = imx219->mode->height;
 	struct v4l2_fwnode_device_properties props;
 	int exposure_max, exposure_def, hblank;
 	int i, ret;
@@ -1097,15 +1097,15 @@ static int imx219_init_controls(struct imx219 *imx219)
 	/* Initial vblank/hblank/exposure parameters based on current mode */
 	imx219->vblank = v4l2_ctrl_new_std(ctrl_hdlr, &imx219_ctrl_ops,
 					   V4L2_CID_VBLANK, IMX219_VBLANK_MIN,
-					   IMX219_VTS_MAX - height, 1,
-					   imx219->mode->vts_def - height);
-	hblank = IMX219_PPL_DEFAULT - imx219->mode->width;
+					   IMX219_VTS_MAX - mode->height, 1,
+					   mode->vts_def - mode->height);
+	hblank = IMX219_PPL_DEFAULT - mode->width;
 	imx219->hblank = v4l2_ctrl_new_std(ctrl_hdlr, &imx219_ctrl_ops,
 					   V4L2_CID_HBLANK, hblank, hblank,
 					   1, hblank);
 	if (imx219->hblank)
 		imx219->hblank->flags |= V4L2_CTRL_FLAG_READ_ONLY;
-	exposure_max = imx219->mode->vts_def - 4;
+	exposure_max = mode->vts_def - 4;
 	exposure_def = (exposure_max < IMX219_EXPOSURE_DEFAULT) ?
 		exposure_max : IMX219_EXPOSURE_DEFAULT;
 	imx219->exposure = v4l2_ctrl_new_std(ctrl_hdlr, &imx219_ctrl_ops,
@@ -1298,7 +1298,8 @@ static int imx219_probe(struct i2c_client *client)
 	/* Set default mode to max resolution */
 	imx219->mode = &supported_modes[0];
 
-	/* sensor doesn't enter LP-11 state upon power up until and unless
+	/*
+	 * Sensor doesn't enter LP-11 state upon power up until and unless
 	 * streaming is started, so upon power up switch the modes to:
 	 * streaming -> standby
 	 */
Signature · 1 line
2.53.0
maintainer
#3 lore raw

PATCH 3/7 media: i2c: imx219: Drop IMX219_VTS_* macros

In reply to Sasha Levin

From: Laurent Pinchart <[email protected]>

[ Upstream commit 5ebbdd7aab3321e60a8be23aac1fee4f16644021 ]

The IMX219_VTS_* macros define default VTS values for the modes supported by the driver. They are used in a single place, and hinder readability compared to using the value directly as a decimal number. Drop them.

Stable-dep-of: 2c4f1ba73543 ("media: imx219: Fix maximum frame length in lines")

---
 drivers/media/i2c/imx219.c | 18 ++++--------------
 1 file changed, 4 insertions(+), 14 deletions(-)
drivers/media/i2c/imx219.c +4 -14
index c34a8bb5854ad..c6894b15bc431 100644
@@ -71,20 +71,10 @@
 
 /* V_TIMING internal */
 #define IMX219_REG_VTS			CCI_REG16(0x0160)
-#define IMX219_VTS_15FPS		0x0dc6
-#define IMX219_VTS_30FPS_1080P		0x06e3
-#define IMX219_VTS_30FPS_BINNED		0x06e3
-#define IMX219_VTS_30FPS_640x480	0x06e3
 #define IMX219_VTS_MAX			0xffff
 
 #define IMX219_VBLANK_MIN		32
 
-/*Frame Length Line*/
-#define IMX219_FLL_MIN			0x08a6
-#define IMX219_FLL_MAX			0xffff
-#define IMX219_FLL_STEP			1
-#define IMX219_FLL_DEFAULT		0x0c98
-
 /* HBLANK control - read only */
 #define IMX219_PPL_DEFAULT		3448
 
@@ -381,7 +371,7 @@ static const struct imx219_mode supported_modes[] = {
 			.width = 3280,
 			.height = 2464
 		},
-		.vts_def = IMX219_VTS_15FPS,
+		.vts_def = 3526,
 		.reg_list = {
 			.num_of_regs = ARRAY_SIZE(mode_3280x2464_regs),
 			.regs = mode_3280x2464_regs,
@@ -398,7 +388,7 @@ static const struct imx219_mode supported_modes[] = {
 			.width = 1920,
 			.height = 1080
 		},
-		.vts_def = IMX219_VTS_30FPS_1080P,
+		.vts_def = 1763,
 		.reg_list = {
 			.num_of_regs = ARRAY_SIZE(mode_1920_1080_regs),
 			.regs = mode_1920_1080_regs,
@@ -415,7 +405,7 @@ static const struct imx219_mode supported_modes[] = {
 			.width = 3280,
 			.height = 2464
 		},
-		.vts_def = IMX219_VTS_30FPS_BINNED,
+		.vts_def = 1763,
 		.reg_list = {
 			.num_of_regs = ARRAY_SIZE(mode_1640_1232_regs),
 			.regs = mode_1640_1232_regs,
@@ -432,7 +422,7 @@ static const struct imx219_mode supported_modes[] = {
 			.width = 1280,
 			.height = 960
 		},
-		.vts_def = IMX219_VTS_30FPS_640x480,
+		.vts_def = 1763,
 		.reg_list = {
 			.num_of_regs = ARRAY_SIZE(mode_640_480_regs),
 			.regs = mode_640_480_regs,
Signature · 1 line
2.53.0
maintainer
#4 lore raw

PATCH 4/7 media: i2c: imx219: Group functions by purpose

In reply to Sasha Levin

From: Laurent Pinchart <[email protected]>

[ Upstream commit d03dfb7d4c5fae0d3f297536063e00ea2c1129d5 ]

Move functions around to group them by purpose, in order to improve readability. No functional change is intended.

Stable-dep-of: 2c4f1ba73543 ("media: imx219: Fix maximum frame length in lines")

---
 drivers/media/i2c/imx219.c | 592 +++++++++++++++++++------------------
 1 file changed, 304 insertions(+), 288 deletions(-)
drivers/media/i2c/imx219.c +304 -288
index c6894b15bc431..f8c563430d639 100644
@@ -485,6 +485,10 @@ static u32 imx219_get_format_code(struct imx219 *imx219, u32 code)
 	return imx219_mbus_formats[i];
 }
 
+/* -----------------------------------------------------------------------------
+ * Controls
+ */
+
 static int imx219_set_ctrl(struct v4l2_ctrl *ctrl)
 {
 	struct imx219 *imx219 =
@@ -576,130 +580,135 @@ static const struct v4l2_ctrl_ops imx219_ctrl_ops = {
 	.s_ctrl = imx219_set_ctrl,
 };
 
-static void imx219_update_pad_format(struct imx219 *imx219,
-				     const struct imx219_mode *mode,
-				     struct v4l2_mbus_framefmt *fmt, u32 code)
+static unsigned long imx219_get_pixel_rate(struct imx219 *imx219)
 {
-	/* Bayer order varies with flips */
-	fmt->code = imx219_get_format_code(imx219, code);
-	fmt->width = mode->width;
-	fmt->height = mode->height;
-	fmt->field = V4L2_FIELD_NONE;
-	fmt->colorspace = V4L2_COLORSPACE_RAW;
-	fmt->quantization = V4L2_QUANTIZATION_FULL_RANGE;
-	fmt->xfer_func = V4L2_XFER_FUNC_NONE;
+	return (imx219->lanes == 2) ? IMX219_PIXEL_RATE : IMX219_PIXEL_RATE_4LANE;
 }
 
-static int imx219_init_cfg(struct v4l2_subdev *sd,
-			   struct v4l2_subdev_state *state)
+/* Initialize control handlers */
+static int imx219_init_controls(struct imx219 *imx219)
 {
-	struct imx219 *imx219 = to_imx219(sd);
-	struct v4l2_mbus_framefmt *format;
-	struct v4l2_rect *crop;
-
-	/* Initialize the format. */
-	format = v4l2_subdev_get_pad_format(sd, state, 0);
-	imx219_update_pad_format(imx219, &supported_modes[0], format,
-				 MEDIA_BUS_FMT_SRGGB10_1X10);
-
-	/* Initialize the crop rectangle. */
-	crop = v4l2_subdev_get_pad_crop(sd, state, 0);
-	crop->top = IMX219_PIXEL_ARRAY_TOP;
-	crop->left = IMX219_PIXEL_ARRAY_LEFT;
-	crop->width = IMX219_PIXEL_ARRAY_WIDTH;
-	crop->height = IMX219_PIXEL_ARRAY_HEIGHT;
+	struct i2c_client *client = v4l2_get_subdevdata(&imx219->sd);
+	const struct imx219_mode *mode = &supported_modes[0];
+	struct v4l2_ctrl_handler *ctrl_hdlr;
+	struct v4l2_fwnode_device_properties props;
+	int exposure_max, exposure_def, hblank;
+	int i, ret;
 
-	return 0;
-}
+	ctrl_hdlr = &imx219->ctrl_handler;
+	ret = v4l2_ctrl_handler_init(ctrl_hdlr, 12);
+	if (ret)
+		return ret;
 
-static int imx219_enum_mbus_code(struct v4l2_subdev *sd,
-				 struct v4l2_subdev_state *sd_state,
-				 struct v4l2_subdev_mbus_code_enum *code)
-{
-	struct imx219 *imx219 = to_imx219(sd);
+	/* By default, PIXEL_RATE is read only */
+	imx219->pixel_rate = v4l2_ctrl_new_std(ctrl_hdlr, &imx219_ctrl_ops,
+					       V4L2_CID_PIXEL_RATE,
+					       imx219_get_pixel_rate(imx219),
+					       imx219_get_pixel_rate(imx219), 1,
+					       imx219_get_pixel_rate(imx219));
 
-	if (code->index >= (ARRAY_SIZE(imx219_mbus_formats) / 4))
-		return -EINVAL;
+	imx219->link_freq =
+		v4l2_ctrl_new_int_menu(ctrl_hdlr, &imx219_ctrl_ops,
+				       V4L2_CID_LINK_FREQ,
+				       ARRAY_SIZE(imx219_link_freq_menu) - 1, 0,
+				       (imx219->lanes == 2) ? imx219_link_freq_menu :
+				       imx219_link_freq_4lane_menu);
+	if (imx219->link_freq)
+		imx219->link_freq->flags |= V4L2_CTRL_FLAG_READ_ONLY;
 
-	code->code = imx219_get_format_code(imx219, imx219_mbus_formats[code->index * 4]);
+	/* Initial vblank/hblank/exposure parameters based on current mode */
+	imx219->vblank = v4l2_ctrl_new_std(ctrl_hdlr, &imx219_ctrl_ops,
+					   V4L2_CID_VBLANK, IMX219_VBLANK_MIN,
+					   IMX219_VTS_MAX - mode->height, 1,
+					   mode->vts_def - mode->height);
+	hblank = IMX219_PPL_DEFAULT - mode->width;
+	imx219->hblank = v4l2_ctrl_new_std(ctrl_hdlr, &imx219_ctrl_ops,
+					   V4L2_CID_HBLANK, hblank, hblank,
+					   1, hblank);
+	if (imx219->hblank)
+		imx219->hblank->flags |= V4L2_CTRL_FLAG_READ_ONLY;
+	exposure_max = mode->vts_def - 4;
+	exposure_def = (exposure_max < IMX219_EXPOSURE_DEFAULT) ?
+		exposure_max : IMX219_EXPOSURE_DEFAULT;
+	imx219->exposure = v4l2_ctrl_new_std(ctrl_hdlr, &imx219_ctrl_ops,
+					     V4L2_CID_EXPOSURE,
+					     IMX219_EXPOSURE_MIN, exposure_max,
+					     IMX219_EXPOSURE_STEP,
+					     exposure_def);
 
-	return 0;
-}
+	v4l2_ctrl_new_std(ctrl_hdlr, &imx219_ctrl_ops, V4L2_CID_ANALOGUE_GAIN,
+			  IMX219_ANA_GAIN_MIN, IMX219_ANA_GAIN_MAX,
+			  IMX219_ANA_GAIN_STEP, IMX219_ANA_GAIN_DEFAULT);
 
-static int imx219_enum_frame_size(struct v4l2_subdev *sd,
-				  struct v4l2_subdev_state *sd_state,
-				  struct v4l2_subdev_frame_size_enum *fse)
-{
-	struct imx219 *imx219 = to_imx219(sd);
-	u32 code;
+	v4l2_ctrl_new_std(ctrl_hdlr, &imx219_ctrl_ops, V4L2_CID_DIGITAL_GAIN,
+			  IMX219_DGTL_GAIN_MIN, IMX219_DGTL_GAIN_MAX,
+			  IMX219_DGTL_GAIN_STEP, IMX219_DGTL_GAIN_DEFAULT);
 
-	if (fse->index >= ARRAY_SIZE(supported_modes))
-		return -EINVAL;
+	imx219->hflip = v4l2_ctrl_new_std(ctrl_hdlr, &imx219_ctrl_ops,
+					  V4L2_CID_HFLIP, 0, 1, 1, 0);
+	if (imx219->hflip)
+		imx219->hflip->flags |= V4L2_CTRL_FLAG_MODIFY_LAYOUT;
 
-	code = imx219_get_format_code(imx219, fse->code);
-	if (fse->code != code)
-		return -EINVAL;
+	imx219->vflip = v4l2_ctrl_new_std(ctrl_hdlr, &imx219_ctrl_ops,
+					  V4L2_CID_VFLIP, 0, 1, 1, 0);
+	if (imx219->vflip)
+		imx219->vflip->flags |= V4L2_CTRL_FLAG_MODIFY_LAYOUT;
 
-	fse->min_width = supported_modes[fse->index].width;
-	fse->max_width = fse->min_width;
-	fse->min_height = supported_modes[fse->index].height;
-	fse->max_height = fse->min_height;
+	v4l2_ctrl_new_std_menu_items(ctrl_hdlr, &imx219_ctrl_ops,
+				     V4L2_CID_TEST_PATTERN,
+				     ARRAY_SIZE(imx219_test_pattern_menu) - 1,
+				     0, 0, imx219_test_pattern_menu);
+	for (i = 0; i < 4; i++) {
+		/*
+		 * The assumption is that
+		 * V4L2_CID_TEST_PATTERN_GREENR == V4L2_CID_TEST_PATTERN_RED + 1
+		 * V4L2_CID_TEST_PATTERN_BLUE   == V4L2_CID_TEST_PATTERN_RED + 2
+		 * V4L2_CID_TEST_PATTERN_GREENB == V4L2_CID_TEST_PATTERN_RED + 3
+		 */
+		v4l2_ctrl_new_std(ctrl_hdlr, &imx219_ctrl_ops,
+				  V4L2_CID_TEST_PATTERN_RED + i,
+				  IMX219_TESTP_COLOUR_MIN,
+				  IMX219_TESTP_COLOUR_MAX,
+				  IMX219_TESTP_COLOUR_STEP,
+				  IMX219_TESTP_COLOUR_MAX);
+		/* The "Solid color" pattern is white by default */
+	}
 
-	return 0;
-}
+	if (ctrl_hdlr->error) {
+		ret = ctrl_hdlr->error;
+		dev_err(&client->dev, "%s control init failed (%d)\n",
+			__func__, ret);
+		goto error;
+	}
 
-static int imx219_set_pad_format(struct v4l2_subdev *sd,
-				 struct v4l2_subdev_state *sd_state,
-				 struct v4l2_subdev_format *fmt)
-{
-	struct imx219 *imx219 = to_imx219(sd);
-	const struct imx219_mode *mode;
-	int exposure_max, exposure_def, hblank;
-	struct v4l2_mbus_framefmt *format;
-	struct v4l2_rect *crop;
+	ret = v4l2_fwnode_device_parse(&client->dev, &props);
+	if (ret)
+		goto error;
 
-	mode = v4l2_find_nearest_size(supported_modes,
-				      ARRAY_SIZE(supported_modes),
-				      width, height,
-				      fmt->format.width, fmt->format.height);
+	ret = v4l2_ctrl_new_fwnode_properties(ctrl_hdlr, &imx219_ctrl_ops,
+					      &props);
+	if (ret)
+		goto error;
 
-	imx219_update_pad_format(imx219, mode, &fmt->format, fmt->format.code);
+	imx219->sd.ctrl_handler = ctrl_hdlr;
 
-	format = v4l2_subdev_get_pad_format(sd, sd_state, 0);
-	crop = v4l2_subdev_get_pad_crop(sd, sd_state, 0);
+	return 0;
 
-	*format = fmt->format;
-	*crop = mode->crop;
+error:
+	v4l2_ctrl_handler_free(ctrl_hdlr);
 
-	if (fmt->which == V4L2_SUBDEV_FORMAT_ACTIVE) {
-		imx219->mode = mode;
-		/* Update limits and set FPS to default */
-		__v4l2_ctrl_modify_range(imx219->vblank, IMX219_VBLANK_MIN,
-					 IMX219_VTS_MAX - mode->height, 1,
-					 mode->vts_def - mode->height);
-		__v4l2_ctrl_s_ctrl(imx219->vblank,
-				   mode->vts_def - mode->height);
-		/* Update max exposure while meeting expected vblanking */
-		exposure_max = mode->vts_def - 4;
-		exposure_def = (exposure_max < IMX219_EXPOSURE_DEFAULT) ?
-			exposure_max : IMX219_EXPOSURE_DEFAULT;
-		__v4l2_ctrl_modify_range(imx219->exposure,
-					 imx219->exposure->minimum,
-					 exposure_max, imx219->exposure->step,
-					 exposure_def);
-		/*
-		 * Currently PPL is fixed to IMX219_PPL_DEFAULT, so hblank
-		 * depends on mode->width only, and is not changeble in any
-		 * way other than changing the mode.
-		 */
-		hblank = IMX219_PPL_DEFAULT - mode->width;
-		__v4l2_ctrl_modify_range(imx219->hblank, hblank, hblank, 1,
-					 hblank);
-	}
+	return ret;
+}
 
-	return 0;
+static void imx219_free_controls(struct imx219 *imx219)
+{
+	v4l2_ctrl_handler_free(imx219->sd.ctrl_handler);
 }
 
+/* -----------------------------------------------------------------------------
+ * Subdev operations
+ */
+
 static int imx219_set_framefmt(struct imx219 *imx219,
 			       const struct v4l2_mbus_framefmt *format)
 {
@@ -748,37 +757,6 @@ static int imx219_set_binning(struct imx219 *imx219,
 	return -EINVAL;
 }
 
-static int imx219_get_selection(struct v4l2_subdev *sd,
-				struct v4l2_subdev_state *sd_state,
-				struct v4l2_subdev_selection *sel)
-{
-	switch (sel->target) {
-	case V4L2_SEL_TGT_CROP: {
-		sel->r = *v4l2_subdev_get_pad_crop(sd, sd_state, 0);
-		return 0;
-	}
-
-	case V4L2_SEL_TGT_NATIVE_SIZE:
-		sel->r.top = 0;
-		sel->r.left = 0;
-		sel->r.width = IMX219_NATIVE_WIDTH;
-		sel->r.height = IMX219_NATIVE_HEIGHT;
-
-		return 0;
-
-	case V4L2_SEL_TGT_CROP_DEFAULT:
-	case V4L2_SEL_TGT_CROP_BOUNDS:
-		sel->r.top = IMX219_PIXEL_ARRAY_TOP;
-		sel->r.left = IMX219_PIXEL_ARRAY_LEFT;
-		sel->r.width = IMX219_PIXEL_ARRAY_WIDTH;
-		sel->r.height = IMX219_PIXEL_ARRAY_HEIGHT;
-
-		return 0;
-	}
-
-	return -EINVAL;
-}
-
 static int imx219_configure_lanes(struct imx219 *imx219)
 {
 	return cci_write(imx219->regmap, IMX219_REG_CSI_LANE_MODE,
@@ -907,14 +885,198 @@ static int imx219_set_stream(struct v4l2_subdev *sd, int enable)
 }
 
 /* Power/clock management functions */
-static int imx219_power_on(struct device *dev)
+static void imx219_update_pad_format(struct imx219 *imx219,
+				     const struct imx219_mode *mode,
+				     struct v4l2_mbus_framefmt *fmt, u32 code)
 {
-	struct v4l2_subdev *sd = dev_get_drvdata(dev);
-	struct imx219 *imx219 = to_imx219(sd);
-	int ret;
+	/* Bayer order varies with flips */
+	fmt->code = imx219_get_format_code(imx219, code);
+	fmt->width = mode->width;
+	fmt->height = mode->height;
+	fmt->field = V4L2_FIELD_NONE;
+	fmt->colorspace = V4L2_COLORSPACE_RAW;
+	fmt->quantization = V4L2_QUANTIZATION_FULL_RANGE;
+	fmt->xfer_func = V4L2_XFER_FUNC_NONE;
+}
 
-	ret = regulator_bulk_enable(IMX219_NUM_SUPPLIES,
-				    imx219->supplies);
+static int imx219_init_cfg(struct v4l2_subdev *sd,
+			   struct v4l2_subdev_state *state)
+{
+	struct imx219 *imx219 = to_imx219(sd);
+	struct v4l2_mbus_framefmt *format;
+	struct v4l2_rect *crop;
+
+	/* Initialize the format. */
+	format = v4l2_subdev_get_pad_format(sd, state, 0);
+	imx219_update_pad_format(imx219, &supported_modes[0], format,
+				 MEDIA_BUS_FMT_SRGGB10_1X10);
+
+	/* Initialize the crop rectangle. */
+	crop = v4l2_subdev_get_pad_crop(sd, state, 0);
+	crop->top = IMX219_PIXEL_ARRAY_TOP;
+	crop->left = IMX219_PIXEL_ARRAY_LEFT;
+	crop->width = IMX219_PIXEL_ARRAY_WIDTH;
+	crop->height = IMX219_PIXEL_ARRAY_HEIGHT;
+
+	return 0;
+}
+
+static int imx219_enum_mbus_code(struct v4l2_subdev *sd,
+				 struct v4l2_subdev_state *sd_state,
+				 struct v4l2_subdev_mbus_code_enum *code)
+{
+	struct imx219 *imx219 = to_imx219(sd);
+
+	if (code->index >= (ARRAY_SIZE(imx219_mbus_formats) / 4))
+		return -EINVAL;
+
+	code->code = imx219_get_format_code(imx219, imx219_mbus_formats[code->index * 4]);
+
+	return 0;
+}
+
+static int imx219_enum_frame_size(struct v4l2_subdev *sd,
+				  struct v4l2_subdev_state *sd_state,
+				  struct v4l2_subdev_frame_size_enum *fse)
+{
+	struct imx219 *imx219 = to_imx219(sd);
+	u32 code;
+
+	if (fse->index >= ARRAY_SIZE(supported_modes))
+		return -EINVAL;
+
+	code = imx219_get_format_code(imx219, fse->code);
+	if (fse->code != code)
+		return -EINVAL;
+
+	fse->min_width = supported_modes[fse->index].width;
+	fse->max_width = fse->min_width;
+	fse->min_height = supported_modes[fse->index].height;
+	fse->max_height = fse->min_height;
+
+	return 0;
+}
+
+static int imx219_set_pad_format(struct v4l2_subdev *sd,
+				 struct v4l2_subdev_state *sd_state,
+				 struct v4l2_subdev_format *fmt)
+{
+	struct imx219 *imx219 = to_imx219(sd);
+	const struct imx219_mode *mode;
+	int exposure_max, exposure_def, hblank;
+	struct v4l2_mbus_framefmt *format;
+	struct v4l2_rect *crop;
+
+	mode = v4l2_find_nearest_size(supported_modes,
+				      ARRAY_SIZE(supported_modes),
+				      width, height,
+				      fmt->format.width, fmt->format.height);
+
+	imx219_update_pad_format(imx219, mode, &fmt->format, fmt->format.code);
+
+	format = v4l2_subdev_get_pad_format(sd, sd_state, 0);
+	crop = v4l2_subdev_get_pad_crop(sd, sd_state, 0);
+
+	*format = fmt->format;
+	*crop = mode->crop;
+
+	if (fmt->which == V4L2_SUBDEV_FORMAT_ACTIVE) {
+		imx219->mode = mode;
+		/* Update limits and set FPS to default */
+		__v4l2_ctrl_modify_range(imx219->vblank, IMX219_VBLANK_MIN,
+					 IMX219_VTS_MAX - mode->height, 1,
+					 mode->vts_def - mode->height);
+		__v4l2_ctrl_s_ctrl(imx219->vblank,
+				   mode->vts_def - mode->height);
+		/* Update max exposure while meeting expected vblanking */
+		exposure_max = mode->vts_def - 4;
+		exposure_def = (exposure_max < IMX219_EXPOSURE_DEFAULT) ?
+			exposure_max : IMX219_EXPOSURE_DEFAULT;
+		__v4l2_ctrl_modify_range(imx219->exposure,
+					 imx219->exposure->minimum,
+					 exposure_max, imx219->exposure->step,
+					 exposure_def);
+		/*
+		 * Currently PPL is fixed to IMX219_PPL_DEFAULT, so hblank
+		 * depends on mode->width only, and is not changeble in any
+		 * way other than changing the mode.
+		 */
+		hblank = IMX219_PPL_DEFAULT - mode->width;
+		__v4l2_ctrl_modify_range(imx219->hblank, hblank, hblank, 1,
+					 hblank);
+	}
+
+	return 0;
+}
+
+static int imx219_get_selection(struct v4l2_subdev *sd,
+				struct v4l2_subdev_state *sd_state,
+				struct v4l2_subdev_selection *sel)
+{
+	switch (sel->target) {
+	case V4L2_SEL_TGT_CROP: {
+		sel->r = *v4l2_subdev_get_pad_crop(sd, sd_state, 0);
+		return 0;
+	}
+
+	case V4L2_SEL_TGT_NATIVE_SIZE:
+		sel->r.top = 0;
+		sel->r.left = 0;
+		sel->r.width = IMX219_NATIVE_WIDTH;
+		sel->r.height = IMX219_NATIVE_HEIGHT;
+
+		return 0;
+
+	case V4L2_SEL_TGT_CROP_DEFAULT:
+	case V4L2_SEL_TGT_CROP_BOUNDS:
+		sel->r.top = IMX219_PIXEL_ARRAY_TOP;
+		sel->r.left = IMX219_PIXEL_ARRAY_LEFT;
+		sel->r.width = IMX219_PIXEL_ARRAY_WIDTH;
+		sel->r.height = IMX219_PIXEL_ARRAY_HEIGHT;
+
+		return 0;
+	}
+
+	return -EINVAL;
+}
+
+static const struct v4l2_subdev_core_ops imx219_core_ops = {
+	.subscribe_event = v4l2_ctrl_subdev_subscribe_event,
+	.unsubscribe_event = v4l2_event_subdev_unsubscribe,
+};
+
+static const struct v4l2_subdev_video_ops imx219_video_ops = {
+	.s_stream = imx219_set_stream,
+};
+
+static const struct v4l2_subdev_pad_ops imx219_pad_ops = {
+	.init_cfg = imx219_init_cfg,
+	.enum_mbus_code = imx219_enum_mbus_code,
+	.get_fmt = v4l2_subdev_get_fmt,
+	.set_fmt = imx219_set_pad_format,
+	.get_selection = imx219_get_selection,
+	.enum_frame_size = imx219_enum_frame_size,
+};
+
+static const struct v4l2_subdev_ops imx219_subdev_ops = {
+	.core = &imx219_core_ops,
+	.video = &imx219_video_ops,
+	.pad = &imx219_pad_ops,
+};
+
+
+/* -----------------------------------------------------------------------------
+ * Power management
+ */
+
+static int imx219_power_on(struct device *dev)
+{
+	struct v4l2_subdev *sd = dev_get_drvdata(dev);
+	struct imx219 *imx219 = to_imx219(sd);
+	int ret;
+
+	ret = regulator_bulk_enable(IMX219_NUM_SUPPLIES,
+				    imx219->supplies);
 	if (ret) {
 		dev_err(dev, "%s: failed to enable regulators\n",
 			__func__);
@@ -987,6 +1149,10 @@ static int __maybe_unused imx219_resume(struct device *dev)
 	return ret;
 }
 
+/* -----------------------------------------------------------------------------
+ * Probe & remove
+ */
+
 static int imx219_get_regulators(struct imx219 *imx219)
 {
 	struct i2c_client *client = v4l2_get_subdevdata(&imx219->sd);
@@ -1023,156 +1189,6 @@ static int imx219_identify_module(struct imx219 *imx219)
 	return 0;
 }
 
-static const struct v4l2_subdev_core_ops imx219_core_ops = {
-	.subscribe_event = v4l2_ctrl_subdev_subscribe_event,
-	.unsubscribe_event = v4l2_event_subdev_unsubscribe,
-};
-
-static const struct v4l2_subdev_video_ops imx219_video_ops = {
-	.s_stream = imx219_set_stream,
-};
-
-static const struct v4l2_subdev_pad_ops imx219_pad_ops = {
-	.init_cfg = imx219_init_cfg,
-	.enum_mbus_code = imx219_enum_mbus_code,
-	.get_fmt = v4l2_subdev_get_fmt,
-	.set_fmt = imx219_set_pad_format,
-	.get_selection = imx219_get_selection,
-	.enum_frame_size = imx219_enum_frame_size,
-};
-
-static const struct v4l2_subdev_ops imx219_subdev_ops = {
-	.core = &imx219_core_ops,
-	.video = &imx219_video_ops,
-	.pad = &imx219_pad_ops,
-};
-
-
-static unsigned long imx219_get_pixel_rate(struct imx219 *imx219)
-{
-	return (imx219->lanes == 2) ? IMX219_PIXEL_RATE : IMX219_PIXEL_RATE_4LANE;
-}
-
-/* Initialize control handlers */
-static int imx219_init_controls(struct imx219 *imx219)
-{
-	struct i2c_client *client = v4l2_get_subdevdata(&imx219->sd);
-	const struct imx219_mode *mode = &supported_modes[0];
-	struct v4l2_ctrl_handler *ctrl_hdlr;
-	struct v4l2_fwnode_device_properties props;
-	int exposure_max, exposure_def, hblank;
-	int i, ret;
-
-	ctrl_hdlr = &imx219->ctrl_handler;
-	ret = v4l2_ctrl_handler_init(ctrl_hdlr, 12);
-	if (ret)
-		return ret;
-
-	/* By default, PIXEL_RATE is read only */
-	imx219->pixel_rate = v4l2_ctrl_new_std(ctrl_hdlr, &imx219_ctrl_ops,
-					       V4L2_CID_PIXEL_RATE,
-					       imx219_get_pixel_rate(imx219),
-					       imx219_get_pixel_rate(imx219), 1,
-					       imx219_get_pixel_rate(imx219));
-
-	imx219->link_freq =
-		v4l2_ctrl_new_int_menu(ctrl_hdlr, &imx219_ctrl_ops,
-				       V4L2_CID_LINK_FREQ,
-				       ARRAY_SIZE(imx219_link_freq_menu) - 1, 0,
-				       (imx219->lanes == 2) ? imx219_link_freq_menu :
-				       imx219_link_freq_4lane_menu);
-	if (imx219->link_freq)
-		imx219->link_freq->flags |= V4L2_CTRL_FLAG_READ_ONLY;
-
-	/* Initial vblank/hblank/exposure parameters based on current mode */
-	imx219->vblank = v4l2_ctrl_new_std(ctrl_hdlr, &imx219_ctrl_ops,
-					   V4L2_CID_VBLANK, IMX219_VBLANK_MIN,
-					   IMX219_VTS_MAX - mode->height, 1,
-					   mode->vts_def - mode->height);
-	hblank = IMX219_PPL_DEFAULT - mode->width;
-	imx219->hblank = v4l2_ctrl_new_std(ctrl_hdlr, &imx219_ctrl_ops,
-					   V4L2_CID_HBLANK, hblank, hblank,
-					   1, hblank);
-	if (imx219->hblank)
-		imx219->hblank->flags |= V4L2_CTRL_FLAG_READ_ONLY;
-	exposure_max = mode->vts_def - 4;
-	exposure_def = (exposure_max < IMX219_EXPOSURE_DEFAULT) ?
-		exposure_max : IMX219_EXPOSURE_DEFAULT;
-	imx219->exposure = v4l2_ctrl_new_std(ctrl_hdlr, &imx219_ctrl_ops,
-					     V4L2_CID_EXPOSURE,
-					     IMX219_EXPOSURE_MIN, exposure_max,
-					     IMX219_EXPOSURE_STEP,
-					     exposure_def);
-
-	v4l2_ctrl_new_std(ctrl_hdlr, &imx219_ctrl_ops, V4L2_CID_ANALOGUE_GAIN,
-			  IMX219_ANA_GAIN_MIN, IMX219_ANA_GAIN_MAX,
-			  IMX219_ANA_GAIN_STEP, IMX219_ANA_GAIN_DEFAULT);
-
-	v4l2_ctrl_new_std(ctrl_hdlr, &imx219_ctrl_ops, V4L2_CID_DIGITAL_GAIN,
-			  IMX219_DGTL_GAIN_MIN, IMX219_DGTL_GAIN_MAX,
-			  IMX219_DGTL_GAIN_STEP, IMX219_DGTL_GAIN_DEFAULT);
-
-	imx219->hflip = v4l2_ctrl_new_std(ctrl_hdlr, &imx219_ctrl_ops,
-					  V4L2_CID_HFLIP, 0, 1, 1, 0);
-	if (imx219->hflip)
-		imx219->hflip->flags |= V4L2_CTRL_FLAG_MODIFY_LAYOUT;
-
-	imx219->vflip = v4l2_ctrl_new_std(ctrl_hdlr, &imx219_ctrl_ops,
-					  V4L2_CID_VFLIP, 0, 1, 1, 0);
-	if (imx219->vflip)
-		imx219->vflip->flags |= V4L2_CTRL_FLAG_MODIFY_LAYOUT;
-
-	v4l2_ctrl_new_std_menu_items(ctrl_hdlr, &imx219_ctrl_ops,
-				     V4L2_CID_TEST_PATTERN,
-				     ARRAY_SIZE(imx219_test_pattern_menu) - 1,
-				     0, 0, imx219_test_pattern_menu);
-	for (i = 0; i < 4; i++) {
-		/*
-		 * The assumption is that
-		 * V4L2_CID_TEST_PATTERN_GREENR == V4L2_CID_TEST_PATTERN_RED + 1
-		 * V4L2_CID_TEST_PATTERN_BLUE   == V4L2_CID_TEST_PATTERN_RED + 2
-		 * V4L2_CID_TEST_PATTERN_GREENB == V4L2_CID_TEST_PATTERN_RED + 3
-		 */
-		v4l2_ctrl_new_std(ctrl_hdlr, &imx219_ctrl_ops,
-				  V4L2_CID_TEST_PATTERN_RED + i,
-				  IMX219_TESTP_COLOUR_MIN,
-				  IMX219_TESTP_COLOUR_MAX,
-				  IMX219_TESTP_COLOUR_STEP,
-				  IMX219_TESTP_COLOUR_MAX);
-		/* The "Solid color" pattern is white by default */
-	}
-
-	if (ctrl_hdlr->error) {
-		ret = ctrl_hdlr->error;
-		dev_err(&client->dev, "%s control init failed (%d)\n",
-			__func__, ret);
-		goto error;
-	}
-
-	ret = v4l2_fwnode_device_parse(&client->dev, &props);
-	if (ret)
-		goto error;
-
-	ret = v4l2_ctrl_new_fwnode_properties(ctrl_hdlr, &imx219_ctrl_ops,
-					      &props);
-	if (ret)
-		goto error;
-
-	imx219->sd.ctrl_handler = ctrl_hdlr;
-
-	return 0;
-
-error:
-	v4l2_ctrl_handler_free(ctrl_hdlr);
-
-	return ret;
-}
-
-static void imx219_free_controls(struct imx219 *imx219)
-{
-	v4l2_ctrl_handler_free(imx219->sd.ctrl_handler);
-}
-
 static int imx219_check_hwcfg(struct device *dev, struct imx219 *imx219)
 {
 	struct fwnode_handle *endpoint;
Signature · 1 line
2.53.0
maintainer
#5 lore raw

PATCH 5/7 media: i2c: imx219: Calculate crop rectangle dynamically

In reply to Sasha Levin

From: Laurent Pinchart <[email protected]>

[ Upstream commit 0af46fbc333d1a52c72823d935590410357bab47 ]

Calculate the crop rectangle size and location dynamically when setting the format, instead of storing it in the imx219_mode structure. This removes duplicated information from the mode, to guarantee consistency.

Stable-dep-of: 2c4f1ba73543 ("media: imx219: Fix maximum frame length in lines")

---
 drivers/media/i2c/imx219.c | 45 +++++++++++++-------------------------
 1 file changed, 15 insertions(+), 30 deletions(-)
drivers/media/i2c/imx219.c +15 -30
index f8c563430d639..4c5388edc10b0 100644
@@ -18,6 +18,7 @@
 #include <linux/delay.h>
 #include <linux/gpio/consumer.h>
 #include <linux/i2c.h>
+#include <linux/minmax.h>
 #include <linux/module.h>
 #include <linux/pm_runtime.h>
 #include <linux/regulator/consumer.h>
@@ -161,9 +162,6 @@ struct imx219_mode {
 	/* Frame height */
 	unsigned int height;
 
-	/* Analog crop rectangle. */
-	struct v4l2_rect crop;
-
 	/* V-timing */
 	unsigned int vts_def;
 
@@ -365,12 +363,6 @@ static const struct imx219_mode supported_modes[] = {
 		/* 8MPix 15fps mode */
 		.width = 3280,
 		.height = 2464,
-		.crop = {
-			.left = IMX219_PIXEL_ARRAY_LEFT,
-			.top = IMX219_PIXEL_ARRAY_TOP,
-			.width = 3280,
-			.height = 2464
-		},
 		.vts_def = 3526,
 		.reg_list = {
 			.num_of_regs = ARRAY_SIZE(mode_3280x2464_regs),
@@ -382,12 +374,6 @@ static const struct imx219_mode supported_modes[] = {
 		/* 1080P 30fps cropped */
 		.width = 1920,
 		.height = 1080,
-		.crop = {
-			.left = 688,
-			.top = 700,
-			.width = 1920,
-			.height = 1080
-		},
 		.vts_def = 1763,
 		.reg_list = {
 			.num_of_regs = ARRAY_SIZE(mode_1920_1080_regs),
@@ -399,12 +385,6 @@ static const struct imx219_mode supported_modes[] = {
 		/* 2x2 binned 30fps mode */
 		.width = 1640,
 		.height = 1232,
-		.crop = {
-			.left = IMX219_PIXEL_ARRAY_LEFT,
-			.top = IMX219_PIXEL_ARRAY_TOP,
-			.width = 3280,
-			.height = 2464
-		},
 		.vts_def = 1763,
 		.reg_list = {
 			.num_of_regs = ARRAY_SIZE(mode_1640_1232_regs),
@@ -416,12 +396,6 @@ static const struct imx219_mode supported_modes[] = {
 		/* 640x480 30fps mode */
 		.width = 640,
 		.height = 480,
-		.crop = {
-			.left = 1008,
-			.top = 760,
-			.width = 1280,
-			.height = 960
-		},
 		.vts_def = 1763,
 		.reg_list = {
 			.num_of_regs = ARRAY_SIZE(mode_640_480_regs),
@@ -966,6 +940,7 @@ static int imx219_set_pad_format(struct v4l2_subdev *sd,
 	int exposure_max, exposure_def, hblank;
 	struct v4l2_mbus_framefmt *format;
 	struct v4l2_rect *crop;
+	unsigned int bin_h, bin_v;
 
 	mode = v4l2_find_nearest_size(supported_modes,
 				      ARRAY_SIZE(supported_modes),
@@ -975,10 +950,20 @@ static int imx219_set_pad_format(struct v4l2_subdev *sd,
 	imx219_update_pad_format(imx219, mode, &fmt->format, fmt->format.code);
 
 	format = v4l2_subdev_get_pad_format(sd, sd_state, 0);
-	crop = v4l2_subdev_get_pad_crop(sd, sd_state, 0);
-
 	*format = fmt->format;
-	*crop = mode->crop;
+
+	/*
+	 * Use binning to maximize the crop rectangle size, and centre it in the
+	 * sensor.
+	 */
+	bin_h = min(IMX219_PIXEL_ARRAY_WIDTH / format->width, 2U);
+	bin_v = min(IMX219_PIXEL_ARRAY_HEIGHT / format->height, 2U);
+
+	crop = v4l2_subdev_get_pad_crop(sd, sd_state, 0);
+	crop->width = format->width * bin_h;
+	crop->height = format->height * bin_v;
+	crop->left = (IMX219_NATIVE_WIDTH - crop->width) / 2;
+	crop->top = (IMX219_NATIVE_HEIGHT - crop->height) / 2;
 
 	if (fmt->which == V4L2_SUBDEV_FORMAT_ACTIVE) {
 		imx219->mode = mode;
Signature · 1 line
2.53.0
maintainer
#6 lore raw

PATCH 6/7 media: i2c: imx219: Rename VTS to FRM_LENGTH

In reply to Sasha Levin

From: Jai Luthra <[email protected]>

[ Upstream commit 04f78503f99ae7e9887c7fe5e4bc54a7cfb10fe0 ]

The IMX219 datasheet refers to the vertical length + blanking as FRM_LENGTH instead of VTS.

Stable-dep-of: 2c4f1ba73543 ("media: imx219: Fix maximum frame length in lines")

---
 drivers/media/i2c/imx219.c | 31 +++++++++++++++----------------
 1 file changed, 15 insertions(+), 16 deletions(-)
drivers/media/i2c/imx219.c +15 -16
index 4c5388edc10b0..457d4d1ed4c2b 100644
@@ -71,9 +71,8 @@
 #define IMX219_EXPOSURE_MAX		65535
 
 /* V_TIMING internal */
-#define IMX219_REG_VTS			CCI_REG16(0x0160)
-#define IMX219_VTS_MAX			0xffff
-
+#define IMX219_REG_FRM_LENGTH_A		CCI_REG16(0x0160)
+#define IMX219_FLL_MAX			0xffff
 #define IMX219_VBLANK_MIN		32
 
 /* HBLANK control - read only */
@@ -163,7 +162,7 @@ struct imx219_mode {
 	unsigned int height;
 
 	/* V-timing */
-	unsigned int vts_def;
+	unsigned int fll_def;
 
 	/* Default register values */
 	struct imx219_reg_list reg_list;
@@ -363,7 +362,7 @@ static const struct imx219_mode supported_modes[] = {
 		/* 8MPix 15fps mode */
 		.width = 3280,
 		.height = 2464,
-		.vts_def = 3526,
+		.fll_def = 3526,
 		.reg_list = {
 			.num_of_regs = ARRAY_SIZE(mode_3280x2464_regs),
 			.regs = mode_3280x2464_regs,
@@ -374,7 +373,7 @@ static const struct imx219_mode supported_modes[] = {
 		/* 1080P 30fps cropped */
 		.width = 1920,
 		.height = 1080,
-		.vts_def = 1763,
+		.fll_def = 1763,
 		.reg_list = {
 			.num_of_regs = ARRAY_SIZE(mode_1920_1080_regs),
 			.regs = mode_1920_1080_regs,
@@ -385,7 +384,7 @@ static const struct imx219_mode supported_modes[] = {
 		/* 2x2 binned 30fps mode */
 		.width = 1640,
 		.height = 1232,
-		.vts_def = 1763,
+		.fll_def = 1763,
 		.reg_list = {
 			.num_of_regs = ARRAY_SIZE(mode_1640_1232_regs),
 			.regs = mode_1640_1232_regs,
@@ -396,7 +395,7 @@ static const struct imx219_mode supported_modes[] = {
 		/* 640x480 30fps mode */
 		.width = 640,
 		.height = 480,
-		.vts_def = 1763,
+		.fll_def = 1763,
 		.reg_list = {
 			.num_of_regs = ARRAY_SIZE(mode_640_480_regs),
 			.regs = mode_640_480_regs,
@@ -518,7 +517,7 @@ static int imx219_set_ctrl(struct v4l2_ctrl *ctrl)
 			  imx219->hflip->val | imx219->vflip->val << 1, &ret);
 		break;
 	case V4L2_CID_VBLANK:
-		cci_write(imx219->regmap, IMX219_REG_VTS,
+		cci_write(imx219->regmap, IMX219_REG_FRM_LENGTH_A,
 			  format->height + ctrl->val, &ret);
 		break;
 	case V4L2_CID_TEST_PATTERN_RED:
@@ -593,15 +592,15 @@ static int imx219_init_controls(struct imx219 *imx219)
 	/* Initial vblank/hblank/exposure parameters based on current mode */
 	imx219->vblank = v4l2_ctrl_new_std(ctrl_hdlr, &imx219_ctrl_ops,
 					   V4L2_CID_VBLANK, IMX219_VBLANK_MIN,
-					   IMX219_VTS_MAX - mode->height, 1,
-					   mode->vts_def - mode->height);
+					   IMX219_FLL_MAX - mode->height, 1,
+					   mode->fll_def - mode->height);
 	hblank = IMX219_PPL_DEFAULT - mode->width;
 	imx219->hblank = v4l2_ctrl_new_std(ctrl_hdlr, &imx219_ctrl_ops,
 					   V4L2_CID_HBLANK, hblank, hblank,
 					   1, hblank);
 	if (imx219->hblank)
 		imx219->hblank->flags |= V4L2_CTRL_FLAG_READ_ONLY;
-	exposure_max = mode->vts_def - 4;
+	exposure_max = mode->fll_def - 4;
 	exposure_def = (exposure_max < IMX219_EXPOSURE_DEFAULT) ?
 		exposure_max : IMX219_EXPOSURE_DEFAULT;
 	imx219->exposure = v4l2_ctrl_new_std(ctrl_hdlr, &imx219_ctrl_ops,
@@ -969,12 +968,12 @@ static int imx219_set_pad_format(struct v4l2_subdev *sd,
 		imx219->mode = mode;
 		/* Update limits and set FPS to default */
 		__v4l2_ctrl_modify_range(imx219->vblank, IMX219_VBLANK_MIN,
-					 IMX219_VTS_MAX - mode->height, 1,
-					 mode->vts_def - mode->height);
+					 IMX219_FLL_MAX - mode->height, 1,
+					 mode->fll_def - mode->height);
 		__v4l2_ctrl_s_ctrl(imx219->vblank,
-				   mode->vts_def - mode->height);
+				   mode->fll_def - mode->height);
 		/* Update max exposure while meeting expected vblanking */
-		exposure_max = mode->vts_def - 4;
+		exposure_max = mode->fll_def - 4;
 		exposure_def = (exposure_max < IMX219_EXPOSURE_DEFAULT) ?
 			exposure_max : IMX219_EXPOSURE_DEFAULT;
 		__v4l2_ctrl_modify_range(imx219->exposure,
Signature · 1 line
2.53.0
maintainer
#7 lore raw

PATCH 7/7 media: imx219: Fix maximum frame length in lines

In reply to Sasha Levin

From: Sakari Ailus <[email protected]>

[ Upstream commit 2c4f1ba7354312ad2d6e34e70a518a51a9344715 ]

The driver used the maximum frame length in lines value of 0xffff, but the maximum appears to be 0xfffe instead. Fix it.

Fixes 1283b3b8f82b ("media: i2c: Add driver for Sony IMX219 sensor")
---
 drivers/media/i2c/imx219.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/media/i2c/imx219.c +1 -1
index 457d4d1ed4c2b..2b287c1f8eda4 100644
@@ -72,7 +72,7 @@
 
 /* V_TIMING internal */
 #define IMX219_REG_FRM_LENGTH_A		CCI_REG16(0x0160)
-#define IMX219_FLL_MAX			0xffff
+#define IMX219_FLL_MAX			0xfffe
 #define IMX219_VBLANK_MIN		32
 
 /* HBLANK control - read only */
Signature · 1 line
2.53.0