Skip to contentSkip to conversation

hwmon: (pmbus/lm25066) Fix PMBus coefficient calculations

PATCH New Guenter Roeck 2 participants 2 messages Aug 4 Hardware monitoring

lore
Share & tools
lore

Guenter Roeck

author maintainer
#0 lore raw

PATCH 1/1 hwmon: (pmbus/lm25066) Fix PMBus coefficient calculations

In lm25066_probe(), the PMBus coefficients for current and power are scaled based on the shunt resistor value. The calculation evaluates the multiplication using 32-bit arithmetic because info->m is an int and shunt is a u32:

static int lm25066_probe(struct i2c_client *client) {
    ...
    info->m[PSC_CURRENT_IN] = info->m[PSC_CURRENT_IN] * shunt / 1000;
    info->m[PSC_POWER] = info->m[PSC_POWER] * shunt / 1000;
    ...
}

For large coefficients like 26882 (LM25056) or 15076 (LM5066i), a device tree shunt-resistor-micro-ohms value exceeding approximately 159,000 (159 mOhm, which is physically valid for low-current applications) causes the intermediate product to exceed UINT_MAX (4,294,967,295). This results in a silent wraparound before the division by 1000.

Furthermore, if the wrapped value has the most significant bit set, converting it back to the signed int info->m results in negative coefficients. This logic error leads to drastically corrupted current and power readings, which can cause erratic thermal or power management behavior in the system.

Fix the problem by using 64-bit operations for the multiply/divide operations. This can still overflow, but only for unreasonably large shunt resistor values.

Fixes 94ee5fcc240fe ("hwmon: (pmbus/lm25066) Support configurable sense resistor values")
---
 drivers/hwmon/pmbus/lm25066.c | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)
drivers/hwmon/pmbus/lm25066.c +3 -2
index f20991001727..497802c646e9 100644
@@ -14,6 +14,7 @@
 #include <linux/slab.h>
 #include <linux/i2c.h>
 #include <linux/log2.h>
+#include <linux/math.h>
 #include <linux/of.h>
 #include "pmbus.h"
 
@@ -579,8 +580,8 @@ static int lm25066_probe(struct i2c_client *client)
 	if (of_property_read_u32(client->dev.of_node, "shunt-resistor-micro-ohms", &shunt))
 		shunt = 1000;
 
-	info->m[PSC_CURRENT_IN] = info->m[PSC_CURRENT_IN] * shunt / 1000;
-	info->m[PSC_POWER] = info->m[PSC_POWER] * shunt / 1000;
+	info->m[PSC_CURRENT_IN] = DIV_ROUND_CLOSEST_ULL((u64)info->m[PSC_CURRENT_IN] * shunt, 1000);
+	info->m[PSC_POWER] = DIV_ROUND_CLOSEST_ULL((u64)info->m[PSC_POWER] * shunt, 1000);
 
 #if IS_ENABLED(CONFIG_SENSORS_LM25066_REGULATOR)
 	/* LM25056 doesn't support OPERATION */
Signature · 1 line
2.45.2
#1 lore raw
Sashiko has reviewed this patch and found no issues. It looks great!
Quoted 18 lines

In lm25066_probe(), the PMBus coefficients for current and power are scaled based on the shunt resistor value. The calculation evaluates the multiplication using 32-bit arithmetic because info->m is an int and shunt is a u32:

static int lm25066_probe(struct i2c_client *client) {
    ...
    info->m[PSC_CURRENT_IN] = info->m[PSC_CURRENT_IN] * shunt / 1000;
    info->m[PSC_POWER] = info->m[PSC_POWER] * shunt / 1000;
    ...
}

For large coefficients like 26882 (LM25056) or 15076 (LM5066i), a device tree shunt-resistor-micro-ohms value exceeding approximately 159,000 (159 mOhm, which is physically valid for low-current applications) causes [ ... ]
shunt resistor values.

Quoted 3 lines
Fixes 94ee5fcc240fe ("hwmon: (pmbus/lm25066) Support configurable sense resistor values")

Sashiko has reviewed this patch and found no issues. It looks great!

Signature · 1 line
Sashiko AI review · https://sashiko.dev/#/patchset/[email protected]?part=1